Commit graph

22 commits

Author SHA1 Message Date
Linus Walleij
a1e47b66d9 pci: move pciauto_config_init() to pci.h
Fixing build regressions for the Integrator I get find that a few
boards try to work around the missing declaration of
pciauto_config_init() by declaring it in the local scope. This
does not make sense when the sibling functions are in <pci.h>
so move the function to the header, ridding the build error
in the Integrator and getting rid of the local declarations
here and there.

Reported-by:  Wolfgang Denk <wd@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-04 21:13:33 +01:00
Prabhakar Kushwaha
b03a466d6c powerpc/85xx: Handle PCIe initialization requires for P1021 class SoCs
The P1011, P1012, P1015, P1016, P1020, P1021, P1024, & P1025 SoCs require
that we initialize the SERDES registers if the lanes are configured for
PCIe.  Additionally these devices PCIe controller do not support ASPM
and we have to explicitly disable it.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-29 07:41:37 -05:00
Leo Liu
10fa8d7c70 mpc83xx: fix pcie configuration space read/write
This patch fix a problem for the pcie enumeration when the mpc83xx
pcie controller is connected with switch or we use both of the two
pcie controller.

Signed-off-by: Leo Liu <liucai.lfn@gmail.com>

fix codingstyle and compiler warning: 'pcie_priv' defined but not used

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-02-05 17:01:52 -06:00
Kumar Gala
3a0e3c27a5 powerpc/fsl-pci: Determine pci_controller based on cfg addr for dts fixup
Previously we passed in a specifically named struct pci_controller to
determine if we had setup the particular PCI bus.  Now we can search for
the struct so we dont have to depend on the name or the struct being
statically allocated.

Introduced new find_hose_by_cfg_addr() to get back a pci_controller struct
back by searching for it means we can do things like dynamically allocate
them or not have to expose the static structures to all users.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
2011-01-14 01:32:19 -06:00
Peter Tyser
983eb9d162 pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW
This change does the following:
- Removes the printing of the PCI interrupt line value.  This is
  normally set to 0 by U-Boot on bootup and is rarely used during
  everyday operation.

- Prints out the PCI function number of a device.  Previously a device
  with multiple functions would be printed identically 2 times, which is
  generally confusing.  For example, on an Intel 2 port gigabit Ethernet
  card the following was displayed:
    ...
    04  01  8086  1010  0200  00
    04  01  8086  1010  0200  00
    ...

- Prints a text description of each device's PCI class instead of the
  raw PCI class code.  The textual description makes it much easier to
  determine what devices are installed on a PCI bus.

- Changes the general formatting of the PCI device output.

Previous output:
  PCIE1: connected as Root Complex
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Updated output:
  PCIE1: connected as Root Complex
          04:01.0 - 8086:1010 - Network controller
          04:01.1 - 8086:1010 - Network controller
          03:00.0 - 10b5:8112 - Bridge device
          02:01.0 - 10b5:8518 - Bridge device
          02:02.0 - 10b5:8518 - Bridge device
          08:00.0 - 1957:0040 - Processor
          07:00.0 - 10b5:8518 - Bridge device
          09:00.0 - 10b5:8112 - Bridge device
          07:01.0 - 10b5:8518 - Bridge device
          07:02.0 - 10b5:8518 - Bridge device
          06:00.0 - 10b5:8518 - Bridge device
          02:03.0 - 10b5:8518 - Bridge device
          01:00.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d:00.0 - 1957:0040 - Processor
  PCIE2: Bus 0c - 0d

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-11-14 23:46:46 +01:00
Kumar Gala
8295b94400 pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe
Change the code to use the PCIe capabilities register to determine if we
are a PCIe controller or not.  Additionally cleaned up some white space
and formatting in the file.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:36 -05:00
Anton Vorontsov
cc2a8c7751 PCI: Add pci_last_busno() helper
This is just a handy routine that reports last PCI busno: we walk
down all the hoses and return last hose's last_busno.

Will be used by PCI/PCIe initialization code.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-02-23 15:51:10 -06:00
Becky Bruce
6e61fae4d3 drivers/pci: Create pci_map_bar function
It is no longer always true that the pci bus address can be
used as the virtual address for pci accesses.  pci_map_bar()
is created to return the virtual address for a pci region.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:27:13 +01:00
Kumar Gala
ff4e66e93c pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
can be confusing when reading the code.

Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
for system memory mapping purposes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-07 23:50:04 +01:00
Anton Vorontsov
fd6646c0b9 mpc83xx: Add support for MPC83xx PCI-E controllers
This patch adds support for MPC83xx PCI-E controllers in Root Complex
mode.

The patch is based on Tony Li and Dave Liu work[1].

Though unlike the original patch, by default we don't register PCI-E
buses for use in U-Boot, we only configure the controllers for future
use in other OSes (Linux). This is done because we don't have enough
of spare BATs to map all the PCI-E regions.

To actually use PCI-E in U-Boot, users should explicitly define
CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
only then U-Boot will able to access PCI-E, but at the cost of disabled
address translation.

[1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html

Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-01-21 18:43:49 -06:00
Kumar Gala
30e76d5e3b pci: Allow for PCI addresses to be 64-bit
PCI bus is inherently 64-bit.  While not all system require access to
the full 64-bit PCI address range some do.  This allows those systems
to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2008-10-24 17:32:49 -05:00
Becky Bruce
36f32675f4 Update pci code to use phys_addr_t
Physical addrs need to be represented by phys_addr_t, not
unsigned long.  Otherwise, systems that use CONFIG_PHYS_64BIT
are going to fail mightily.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-05-10 00:59:57 +02:00
Ed Swarthout
63cec5814f Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c.  In a subsequent patch, this will be
utilized by the 85xx ports as well.

Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.

Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.

Fixed a u16 vendor compiler warning in AHCI driver too.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-06 00:22:24 +02:00
Jon Loeliger
13a7fcdf37 * Fix a bunch of compiler warnings for gcc 4.0
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-10-19 11:33:52 -05:00
Matthew McClintock
f0e6f57f71 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:39 -05:00
Wolfgang Denk
7b230f61db Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#pci 2006-03-12 21:31:38 +01:00
Wolfgang Denk
993a22756e Fix bad declaration on pci_cfgfunc_nothing
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:54:11 +01:00
Kumar Gala
a179012e37 Added support for PCI prefetchable region and BARs
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.

If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:24:15 -06:00
Stefan Roese
c157d8e219 Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
Patch by Steven Blakeslee, 27 Jul 2005
2005-08-01 16:41:48 +02:00
wdenk
7a8e9bed17 * Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board
2003-05-31 18:35:21 +00:00
wdenk
c7de829c79 * Patch by Thomas Frieden, 13 Nov 2002:
Add code for AmigaOne board
  (preliminary merge to U-Boot, still WIP)

* Patch by Jon Diekema, 12 Nov 2002:
  - Adding URL for IEEE OUI lookup
  - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
    being defined.
  - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
    root-on-nfs macros are designed to switch how the default boot
    method gets defined.
2002-11-19 11:04:11 +00:00
wdenk
c609719b8d Initial revision 2002-11-03 00:24:07 +00:00