Commit graph

27 commits

Author SHA1 Message Date
David Woodhouse
b0493bb75a env/ext4.c: allow loading from an EXT4 partition on the MMC boot device
This parallels what I added for FAT in commit 6731bef696, allowing the
environment to be found in a specific partition on the device that the
board's mmc_get_env_dev() returns. On the Banana Pi R2 that means the
device that U-Boot was loaded from; either the internal eMMC or an SD
card.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-10-14 11:16:34 -04:00
Marek Vasut
890feecaab env: Discern environment coming from external storage
Add another custom environment flag which discerns environment coming
from external storage from environment set by U-Boot itself.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
0718f74327 env: ext4: add support of command env erase
Add support of opts erase for env in ext4,
this opts is used by command 'env erase'.

This command only fill the env file (CONFIG_ENV_EXT4_FILE)
with 0, the CRC and the saved environment becomes invalid.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
f6de047e02 env: ext4: introduce new function env_ext4_save_buffer
Split the function env_ext4_save to prepare the erase support.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
286fee5062 env: ext4: set gd->env_valid
Add a missing initialization of gd->env_valid in env_ext4_load
as it is already done in some other env device.

Set gd->env_valid = ENV_VALID in env_ext4_save() and env_ext4_load().

This patch allows to have a correct information in 'env info' command.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
0528979fa7 part: Drop disk_partition_t typedef
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Rasmus Villemoes
1df96a7e76 env/ext4.c: remove CONFIG_CMD_SAVEENV ifdef
Removing this ifdef/endif pair yields a "defined but unused warning"
for CONFIG_CMD_SAVEENV=n, but that vanishes if we use the ENV_SAVE_PTR
macro instead. This gives slightly better compile testing, and
moreover, it's possible to have

  CONFIG_CMD_SAVEENV=n
  CONFIG_SPL_SAVEENV=y
  SPL_ENV_IS_IN_EXT4=y

in which case env_ext4_save would erroneously not be compiled in.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24 10:10:00 -04:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
0ac7d722ed env: Move get/set_default_env() to env.h
Move these functions to the new header file and rename set_default_env()
to env_set_default() so that it has a consistent env_ prefix.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Patrice Chotard
d319edcaee env: ext4: Allow overriding interface, device and partition
For platform which can boot on different device, this allows
to override interface, device and partition from board code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:13 +02:00
Jean-Jacques Hiblot
5efc0686ee fs: ext4: Add support for the creation of symbolic links
Re-use the functions used to write/create a file, to support creation of a
symbolic link.
The difference with a regular file are small:
- The inode mode is flagged with S_IFLNK instead of S_IFREG
- The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG
- Instead of storing the content of a file in allocated blocks, the path
to the target is stored. And if the target's path is short enough, no block
is allocated and the target's path is stored in ext2_inode.b.symlink

As with regulars files, if a file/symlink with the same name exits, it is
unlinked first and then re-created.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix ext4 env code]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:03:30 -04:00
Yaniv Levinsky
c5d548a9f8 env: common: accept flags on reset to default env
The function set_default_env() sets the hashtable flags for import_r().
Formally set_default_env() doesn't accept flags from its callers. In
practice the caller can (un)set the H_INTERACTIVE flag, but it has to be
done using the first character of the function's string argument. Other
flags like H_FORCE can't be set by the caller.

Change the function to accept flags argument. The benefits are:
1. The caller will have to explicitly set the H_INTERACTIVE flag,
   instead of un-setting it using a special char in a string.
2. Add the ability to propagate flags from the caller to himport(),
   especially the H_FORCE flag from do_env_default() in nvedit.c that
   currently gets ignored for "env default -a -f" commands.
3. Flags and messages will not be coupled together. A caller will be
   able to set flags without passing a string and vice versa.

Please note:
The propagation of H_FORCE from do_env_default() does not introduce any
functional changes, because currently himport_r() is set to destroy the
old environment regardless if H_FORCE flag is set or not. More changes
are needed to utilize the propagation of H_FORCE.

Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2018-07-19 16:17:58 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Heinrich Schuchardt
95058fbb97 env: mmc/fat/ext4: undefined reference to `mmc_initialize'
For CONFIG_ENV_FAT_INTERFACE != 'mmc' a link error
env/fat.c:93: undefined reference to `mmc_initialize'
occurs if CONFIG_MMC_SUPPORT is not enabled.

Fixes: 26862b4a40 ("env: mmc/fat/ext4: make sure that the MMC sub-system
is initialized before using it")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-16 18:45:35 -04:00
Faiz Abbas
26862b4a40 env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it
When booting from a non-MMC device, the MMC sub-system may not be
initialized when the environment is first accessed.
We need to make sure that the MMC sub-system is ready in even a non-MMC
boot case.

Therefore, initialize mmc before loading environment from it.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-20 08:21:30 -05:00
Simon Goldschmidt
2166ebf783 env: make env drivers propagate env_import return value
For multiple env drivers to correctly implement fallback when
one environment fails to load (e.g. crc error), the return value
of env_import has to be propagated by all env driver's load
function.

Without this change, the first driver that succeeds to load an
environment with an invalid CRC return 0 (success) and no other
drivers are checked.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-02-01 08:05:53 -05:00
Jorge Ramirez-Ortiz
1087a7942c env: enable accessing the environment in an EXT4 partition
For example to store the environment in a file named "/uboot.env" in MMC
"0", where partition "1" contains the EXT4 filesystem, the following
configs should be added to the board's default config:

  CONFIG_ENV_IS_IN_EXT4=y
  CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
  CONFIG_ENV_EXT4_FILE="/uboot.env"
  CONFIG_ENV_EXT4_INTERFACE="mmc"

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[trini: Fix some line over 80 chars issues]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-15 16:28:57 -05:00
Simon Glass
c595199194 env: Adjust the load() method to return an error
The load() methods have inconsistent behaviour on error. Some of them load
an empty default environment. Some load an environment containing an error
message. Others do nothing.

As a step in the right direction, have the method return an error code.
Then the caller could handle this itself in a consistent way.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:31:24 -04:00
Simon Glass
98b5755fb0 env: Drop unused env_ptr variables
This variable is declared as a global in most environment location
drivers. But it is not used outside the drivers and most of the
declarations are unnecessary.

Also some drivers call free() on env_ptr which seems wrong since it is
not in the heap.

Drop the variable where possible, and all calls to free().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:28 -04:00
Simon Glass
ac358beb85 env: Drop the env_name_spec global
Add a name to the driver and use that instead of the global variable
declared by each driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:28 -04:00
Simon Glass
7938822a6b env: Drop common init() functions
Most of the init() implementations just use the default environment.
Adjust env_init_new() to do this automatically, and drop the redundant
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:27 -04:00
Simon Glass
e5bce247b0 env: Switch over to use environment location drivers
Move over to use a the master implementation of the location drivers, with
each method calling out to the appropriate driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:27 -04:00
Simon Glass
4415f1d1f1 env: Create a location driver for each location
Set up a location driver for each supported environment location. At
present this just points to the global functions and is not used. A
later patch will switch this over to use private functions in each driver.

There are several special cases here in various drivers to handle
peculiarities of certain boards:

1. Some boards define CONFIG_ENV_IS_IN_FAT and CONFIG_SPL_ENV_SUPPORT but
do not actually load the environment in SPL. The env load code was
optimised out before but with the driver, it is not. Therefore a special
case is added to env/fat.c. The correct fix (depending on board testing
might be to disable CONFIG_SPL_ENV_SUPPORT.

2. A similar situations happens with CONFIG_ENV_IS_IN_FLASH. Some boards
do not actually load the environment in SPL, so to reduce code size we
need to drop that code. A similar fix may be possible with these boards,
or it may be possible to adjust the environment CONFIG settings.

Added to the above is that the CONFIG_SPL_ENV_SUPPORT option does not
apply when the environment is in flash.

Obviously the above has been discovered through painful and time-consuming
trial and error. Hopefully board maintainers can take a look and figure
out what is actually needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-15 08:18:53 -04:00
Simon Glass
203e94f6c9 env: Add an enum for environment state
At present we have three states for the environment, numbered 0, 1 and 2.
Add an enum to record this to avoid open-coded values.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 08:18:51 -04:00
Simon Glass
0649cd0d49 Move environment files from common/ to env/
About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15 08:18:45 -04:00
Renamed from common/env_ext4.c (Browse further)