Commit graph

5 commits

Author SHA1 Message Date
Peng Fan
9002e735e7 imx: mx6sabresd: fix boot hang with video
Meet the following boot hang.
"
U-Boot SPL 2019.04-00661-gdc80a012e4 (Apr 25 2019 - 10:31:57 +0800)
Trying to boot from MMC1

U-Boot 2019.04-00661-gdc80a012e4 (Apr 25 2019 - 10:31:57 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C)Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
Board: MX6-SabreSD
I2C:   ready
DRAM:  1 GiB
Video device 'ipu@2400000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Video device 'ipu@2800000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Some drivers failed to bind
Error binding driver 'generic_simple_bus': -28
Some drivers failed to bind
initcall sequence 4ffe4500 failed at call 1780dfb7 (err=-28)
"

1. fdtdec_get_alias_seq will use "video" as base, however in alias node,
   we use ipux, so add new alias for U-Boot dts.
2. DM_VIDEO is enabled, however reserve_video is called before
   relocation, so to make DM_VIDEO work before relocation, need to
   set SYS_MALLOC_F_LEN
3. defconfig is updated with savedefconfig

 Note: I do not have a video panel to test, but with this patch, U-Boot
       boots up again, below log.

"
U-Boot SPL 2019.04-00662-g0b62453bff (Apr 25 2019 - 10:36:31 +0800)
Trying to boot from MMC1

U-Boot 2019.04-00662-g0b62453bff (Apr 25 2019 - 10:36:31 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 34C
Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
Board: MX6-SabreSD
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 3
Loading Environment from MMC... *** Warning - bad CRC, using default environment

PCI:   pcie phy link never came up
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-05-20 11:58:01 +02:00
Marcel Ziswiler
7b69baea42 ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings
Re-synced the device tree with Linux 5.0.

This fixes the following warnings:

w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@0:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@1:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@2:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@3:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@4:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@1:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@2:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@3:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@4:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@0: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@0: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@1: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@1: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@2: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@2: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@3: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@3: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@4: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@4: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@1: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@1: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@2: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@2: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@3: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@3: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@4: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@4: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
63c918d188 ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings
This fixes the following warnings:

arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /clocks: unnecessary #address-cells/#size-cells without "ranges" or
 child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/aips-bus@02100000/mipi@021e0000: unnecessary #address-cells/
 #size-cells without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02400000/port@2: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02400000/port@3: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02800000/port@2: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property
arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 /soc/ipu@02800000/port@3: unnecessary #address-cells/#size-cells
 without "ranges" or child "reg" property

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-02-15 22:01:15 +01:00
Abel Vesa
67f165ddfd arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones
from kernel v4.20 (commit 8fe28cb58bcb2).

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 22:01:15 +01:00
Jagan Teki
4f79d0d322 arm: dts: Add devicetree for i.MX6Q
Add i.MX6Q dtsi support from Linux.

Here is the last commit:
"ARM: dts: add gpio-ranges property to iMX GPIO controllers"
(sha1: bb728d662bed0fe91b152550e640cb3f6caa972c)

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00