Commit graph

446 commits

Author SHA1 Message Date
Przemyslaw Marczak
d718ded056 lib: uuid: code refactor for proper maintain between uuid bin and string
Changes in lib/uuid.c to:
- uuid_str_to_bin()
- uuid_bin_to_str()

New parameter is added to specify input/output string format in listed functions
This change allows easy recognize which UUID type is or should be stored in given
string array. Binary data of UUID and GUID is always stored in big endian, only
string representations are different as follows.

String byte: 0                                  36
String char: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
string UUID:    be     be   be   be       be
string GUID:    le     le   le   be       be

This patch also updates functions calls and declarations in a whole code.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: trini@ti.com
2014-04-02 15:44:40 -04:00
Masahiro Yamada
6825a95b0b kbuild: use Linux Kernel build scripts
Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Alexey Brodkin
27ee59af28 net: execute "miiphy_init" if CONFIG_PHYLIB defined
In "common/Makefile" "miiphyutil.o" gets built if any of the following
items enabled:
 * CONFIG_PHYLIB
 * CONFIG_MII
 * CONFIG_CMD_MII

So it's possible to not define CONFIG_MII or CONFIG_CMD_MII and still
use functions like "miiphy_get_dev_by_name".

In its turn "miiphy_get_dev_by_name" traverses "mii_devs" list which is
not initialized because "miiphy_init" never got called.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2014-02-07 09:16:36 -05:00
Andrew Ruder
8e52533d10 net: tftpsrv: Get correct client MAC address
NetServerEther was not being cleared in the tftp server code, so the
destination MAC address would be whatever the last destination MAC
address was.

Scenario:
U-Boot:
	dhcp
	tftpsrv
Host:
	Send device WRQ
Device:
	Responds with ACK to dhcp server mac address with
	host ip address

By clearing NetServerEther, we force a lookup of the host MAC address
to go with the associated host IP.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
2013-11-22 17:03:18 -06:00
rockly
f754f5dc6f net: tftp: Make sure timeout will not effect wrap offset
When the block 0 store to the memory of client and timeout at this
moment. Because of no ACK packet, the server will send block 0 again,
if this client reconnect to the server at this time,
TftpBlockWrapOffset will become larger than it should be.

Signed-off-by: Rockly <rocklygnome@gmail.com>
Patch: 264417
2013-11-22 14:39:31 -06:00
Masahiro Yamada
9cc1180c37 net: convert a makefile to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:44 -04:00
Jim Lin
b63056d6a4 NET: Add net_busy_flag if CONFIG_USB_KEYBOARD is defined
This flag is to make console aware that NET transfer is running or not.

Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26 21:56:35 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Joe Hershberger
5da7cf81c8 net: Correct check for link-local target IP conflict
Make the link-local code conform more completely with the RFC.

This will prevent ARP queries for the target (such as while it is
rebooting) from causing the device to choose a different link-local
address, thinking that its address is in use by another machine.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-06-24 19:11:13 -05:00
Kim Phillips
61fdd4f7c3 net/tftp: sparse fixes
tftp.c:464:17: warning: cast to restricted __be16
tftp.c:552:29: warning: cast to restricted __be16
tftp.c:640:33: warning: cast to restricted __be16
tftp.c:642:25: warning: cast to restricted __be16

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
2013-06-24 19:11:12 -05:00
Matthias Brugger
fa84fa708c net: nfs: add dynamic wait period
This patch tackles the time out problem which leads to break the
boot process, when loading file over nfs. The patch does two things.

First of all, we just ignore messages that arrive with a rpc_id smaller
then the client id. We just interpret this messages as answers to
formaly timed out messages.

Second, when a time out occurs we double the time to wait, so that we
do not stress the server resending the last message.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
2013-06-24 19:10:15 -05:00
Jim Lin
7315cfd9e1 NET: Fix system hanging if NET device is not installed
If we try to boot from NET device, NetInitLoop in net.c will be invoked.
If NET device is not installed, eth_get_dev() function will return
eth_current value, which is NULL.
When NetInitLoop is called, "eth_get_dev->enetaddr" will access
restricted memory area and therefore cause hanging.
This issue is found on Tegra30 Cardhu platform after adding
CONFIG_CMD_NET and CONFIG_CMD_DHCP in config header file.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2013-06-19 08:32:44 -04:00
Simon Glass
978226da5e net: Use new numeric setenv functions
Use setenv_ulong(), setenv_hex() and setenv_addr() in net/

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-28 19:09:23 -08:00
Joe Hershberger
65b0db831e net: Fix endianness bug in link-local
The ip is stored in network order, so we can't test it in host order.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
2012-12-15 12:28:23 -06:00
Simon Glass
85b1980273 net: Add tftp speed indication
This prints a tftp speed indication after the download completes. This
is the 3.6 MiB/s indicator below.

Tegra2 (SeaBoard) # tftp ...
Using asx0 device
TFTP from server 172.22.72.144; our IP address is 172.22.73.81
Filename '/tftpboot/uImage-user-seaboard-1'.
Load address: 0x408000
Loading: #################################################
         3.6 MiB/s
done

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-15 12:28:22 -06:00
Joe Hershberger
a9f51c9b43 env: Add a bootfile env handler
Remove the hard-coded bootfile handler and use a callback instead

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Joe Hershberger
ec8a252cd4 env: Use getenv_yesno() more generally
Move the getenv_yesno() to env_common.c and change most checks for
'y' or 'n' to use this helper.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Kim Phillips
0637059088 net/: sparse fixes
bootp.c:44:14: warning: symbol 'dhcp_state' was not declared. Should it be static?
bootp.c:45:15: warning: symbol 'dhcp_leasetime' was not declared. Should it be static?
bootp.c:46:10: warning: symbol 'NetDHCPServerIP' was not declared. Should it be static?
arp.c:30:17: warning: symbol 'NetArpWaitReplyIP' was not declared. Should it be static?
arp.c:37:16: warning: symbol 'NetArpTxPacket' was not declared. Should it be static?
arp.c:38:17: warning: symbol 'NetArpPacketBuf' was not declared. Should it be static?
atheros.c:33:19: warning: symbol 'AR8021_driver' was not declared. Should it be static?
net.c:183:7: warning: symbol 'PktBuf' was not declared. Should it be static?
net.c:159:21: warning: symbol 'net_state' was not declared. Should it be static?
ping.c:73:6: warning: symbol 'ping_start' was not declared. Should it be static?
ping.c:82:13: warning: symbol 'ping_receive' was not declared. Should it be static?
tftp.c:53:7: warning: symbol 'TftpRRQTimeoutMSecs' was not declared. Should it be static?
tftp.c:54:5: warning: symbol 'TftpRRQTimeoutCountMax' was not declared. Should it be static?
eth.c:125:19: warning: symbol 'eth_current' was not declared. Should it be static?

Note: in the ping.c fix, commit a36b12f95a
"net: Move PING out of net.c" mistakenly carried the ifdef CMD_PING
clause from when it was necessary to avoid warnings when it was embedded
in net.c.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-11-04 11:00:36 -07:00
Tom Rini
1981668777 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-10-04 10:00:42 -07:00
Joe Hershberger
8cab08e804 net: fix netconsole filtering
Adjustment of Michael Walle's fix patch

Commit 8a0eccb105 breaks netconsole. src_ip
must not be converted to host byte order, because nc_ip is already stored
in network byte order (see string_to_ip(), called by getenv_IPaddr()).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03 16:01:22 -07:00
Ilya Yanok
7ac2fe2da2 OMAP: networking support for SPL
This patch adds support for networking in SPL. Some devices are
capable of loading SPL via network so it makes sense to load the
main U-Boot binary via network too. This patch tries to use
existing network code as much as possible. Unfortunately, it depends
on environment which in turn depends on other code so SPL size
is increased significantly. No effort was done to decouple network
code and environment so far.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-01 10:02:14 -07:00
Ilya Yanok
9ace17c88a net/bootp: add VCI support for BOOTP also
Vendor Class Identifier option is common to BOOTP and DHCP and
can be useful without PXE. So send VCI in both BOOTP and DHCP
requests if CONFIG_BOOTP_VCI_STRING is defined.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-01 10:02:14 -07:00
Brian Rzycki
ee0f60df0b net: Quietly ignore DHCP Option 28 (Broadcast Address)
Some DHCP servers (notably dnsmasq) always transmit DHCP Option 28,
Broadcast Address as specified in RFC 2132. Without this patch u-boot
displays the warning:
  *** Unhandled DHCP Option in OFFER/ACK: 28

The patch suppresses the warning and ignores DHCP Option 28. There is
no environment variable to set the broadcast address into and if for
some reason u-boot needs the broadcast it can be calculated from
ipaddr and netmask.

Signed-off-by: Brian Rzycki <bmr@freescale.com>
2012-09-27 12:22:13 -05:00
Benoît Thébaudeau
460f949f89 net: eth_write_hwaddr: Return error for invalid MACs
If dev->enetaddr was supposed to be set with dev->write_hwaddr() but the MAC
address was not valid, return an error.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-09-27 12:21:36 -05:00
Joe Hershberger
8a0eccb105 net: Filter incoming netconsole packets by IP
Check the incoming packets' source IP address... if ncip isn't set to a
broadcast address, only listen to the client at ncip.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-24 13:55:44 -05:00
Joe Hershberger
f8be7d659c net: Improve the speed of netconsole
Previously u-boot would initialize the network interface for every
network operation and then shut it down again.  This makes sense for
most operations where the network in not known to be needed soon after
the operation is complete.  In the case of netconsole, it will use the
network for every interaction with the shell or every printf.  This
means that the network is being reinitialized very often.  On many
devices, this intialization is very slow.

This patch checks for consecutive netconsole actions and leaves the
ethernet hardware initialized between them.  It will still behave the
same old way for all other network operations and any time another
network operation happens between netconsole operations.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-24 13:55:43 -05:00
Tetsuyuki Kobayashi
1389f98fce net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
NetSetTimeout sets incorrect value to timeDelta when CONFIG_SYS_HZ != 1000.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-09-24 13:17:24 -05:00
Michael Walle
46c07bcf12 api: net: fix length check in eth_receive()
If the requested length is too small to hold the received packet,
eth_receive() will return -1 and will leave the packet in the receive
buffers. Instead of returning an error in this case, we return the first
portion of the received packet and remove it from the receive buffers.

This fixes FreeBSD's ubldr. Without this patch it will just stop receiving
packets if the NIC receives more than PKTBUFSRX too large packets.

Signed-off-by: Michael Walle <michael@walle.cc>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Rafal Jaworowski <raj@semihalf.com>
Cc: Piotr Kruszynski <ppk@semihalf.com>
2012-09-24 13:17:24 -05:00
Wolfgang Denk
b98b611502 Merge branch 'next' of git://git.denx.de/u-boot
* 'next' of git://git.denx.de/u-boot:
  MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
  doc: cleanup - move board READMEs into respective board directories
  net: sh_eth: add support for SH7757's GETHER
  net: sh_eth: modify the definitions of regsiter
  net: sh_eth: add SH_ETH_TYPE_ condition
  net: sh_eth: clean up for the SH7757's code
  net: fec_mxc: Fix MDC for xMII
  net: fec_mxc: Fix setting of RCR for xMII
  net: nfs: make NFS_TIMEOUT configurable
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-30 20:39:52 +02:00
Joe Hershberger
a03d638805 net: Make sure the ethaddr is updated in net_init()
NetConsole may call NetSendUDPPacket before NetLoop is called.  This
will cause the source MAC address (NetOurEther) to be wrong.  Instead
of only changing it in NetLoop, move it to NetLoopInit so that it is
also updated when net_init() is called (especially by nc_start()).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
2012-07-24 14:09:40 -05:00
benoit.thebaudeau@advans
b684115791 net: link_local: fix build
Fix comment within comment build error.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-07-19 13:11:31 -05:00
benoit.thebaudeau@advans
b977aa80b5 net: bootp: fix build
Fix NetSetState function name used with CONFIG_BOOTP_MAY_FAIL.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-07-19 13:11:31 -05:00
Tetsuyuki Kobayashi
48a3e999c8 net: nfs: make NFS_TIMEOUT configurable
NFS_TIMEOUT is constant value defined in net/nfs.c. But sometimes it needs to adjust.
This patch enables to override NFS_TIMEOUT by defining CONFIG_NFS_TIMEOUT in a board specific config file.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-07-12 14:13:24 -05:00
Wolfgang Denk
0878222fed Merge branch 'next' of git://git.denx.de/u-boot-net into next
* 'next' of git://git.denx.de/u-boot-net:
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-12 08:23:58 +02:00
Joe Hershberger
154177e14a net: Inline the new eth_setenv_enetaddr_by_index function
This function is currently only used in one case.  Inline for now.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-07-11 13:15:32 -05:00
Rob Herring
c88ef3c12d net: allow setting env enetaddr from net device setting
If the net driver has setup a valid ethernet address and an ethernet
address is not set in the environment already, then set the environment
variables from the net driver setting.

This enables pxe booting on boards which don't set ethaddr env variable.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-07-11 13:15:32 -05:00
Jayachandran Chandrasekharan Nair
bc46dfac2f net: tftp: fix type of block arg to store_block
The block argument for store_block can be -1 when the tftp sequence
number rolls over (i.e TftpBlock == 0), so the first argument to
store_block has to be of type 'int' instead of 'unsigned'.

In our environment (gcc 4.4.5 mips toolchain), this causes incorrect
'offset' to be generated for storing the block, and the tftp block
with number 0 will be written elsewhere, resulting in a bad block in
the downloaded file and a memory corruption.

Signed-off-by: Jayachandran Chandrasekharan Nair <jayachandranc@netlogicmicro.com>
2012-07-11 13:14:16 -05:00
Mike Frysinger
a0bc44e68e net: fix typo in arp clean up
The clean up patch missed an &, so we end up passing an int rather than
a pointer to the sprintf function.

arp.c: In function 'ArpReceive':
arp.c:197: warning: format '%p' expects type 'void *', but argument 3 has type 'int'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-10 10:14:56 -05:00
Wolfgang Denk
3fe63839f3 Minor Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-10 09:18:33 +02:00
Kim Phillips
db7720bad4 net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY
commit "net: use common rand()/srand() functions" introduced the following
build warning on the current u-boot-arm tree:

$ ./MAKEALL MPC8313ERDB_66
Configuring for MPC8313ERDB_66 - Board: MPC8313ERDB, Options: SYS_66MHZ
   text	   data	    bss	    dec	    hex	filename
 271988	  13976	  41768	 327732	  50034	./u-boot
In file included from bootp.c:15:0:
net_rand.h: In function 'srand_mac':
net_rand.h:40:2: warning: implicit declaration of function 'srand' [-Wimplicit-function-declaration]

adding this dependency fixes it.

Cc: Michael Walle <michael@walle.cc>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Michael Walle <michael@walle.cc>
2012-07-08 22:39:42 +02:00
Michael Walle
03c1b04f86 net: add helper to generate random mac address
Add new function eth_random_enetaddr() to generate a locally administered
ethernet address.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2012-07-07 14:07:32 +02:00
Michael Walle
99e139d590 net: use common rand()/srand() functions
Replace rand() with the functions from lib/. The link-local network code
stores its own seed, derived from the MAC address. Thus making it
independent from calls to srand() in other modules.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-07-07 14:07:32 +02:00
Joe Hershberger
4ef8d53caa net: Allow filtering on debug traces in the net subsystem
Add several levels of DEBUG prints so that you can limit the noise to
the severety of your problem.

DEBUG_LL_STATE = Link local state machine changes
DEBUG_DEV_PKT = Packets or info directed to the device
DEBUG_NET_PKT = Packets on info on the network at large
DEBUG_INT_STATE = Internal network state changes

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00
Joe Hershberger
c697576262 net: Work-around for brain-damaged Cisco equipment with arp-proxy
Cisco's arp-proxy feature fails to ignore the link-local address range
This means that a link-local device on a network with this Cisco
equipment will reply to ARP requests for our device (in addition to
our reply).
If we happen to reply first, the requester's ARP table will be
populated with our MAC address, and one packet will be sent to us...
shortly following this, the requester will get an ARP reply from the
Cisco equipment telling the requester to send packets their way
instead of to our device from now on.
This work-around detects this link-local condition and will delay
replying to the ARP request for 5ms so that the first packet is sent
to the Cisco equipment and all following packets are sent to our
device.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00
Joe Hershberger
d22c338e07 net: Add link-local addressing support
Code based on networking/zcip.c in busybox
commit 8531d76a15890c2c535908ce888b2e2aed35b172

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:08 -05:00
Joe Hershberger
228041893c net: Separate ArpRequest() into lower-level func
Link-local support will need to send ARP packets, but needs more
fine-grained control over the contents.  Split the implementation
into 2 parts so link-local can share the code.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 17:53:07 -05:00
Joe Hershberger
e94070c443 net: Don't copy every packet that waits for an ARP
Use the NetArpTxPacket for the ARP packet, not to hold what used to
be in NetTxPacket.
This saves a copy and makes the code easier to understand.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:07 -05:00
Joe Hershberger
46c495d524 net: Fix net buffer initialization
A new non-static function net_init() will initialize buffers and
read from the environment.  Only update from the env on each entry
to NetLoop().

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:06 -05:00
Joe Hershberger
cb1c991120 net: Remove unused parameter from NetInitLoop()
Noone uses it.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-05-23 17:53:06 -05:00
Joe Hershberger
f1d2d28469 net: Remove static allocation for MAC address in PingSend()
Don't force ARP clients to return the MAC address if they don't care
(such as ping)

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-05-23 17:53:05 -05:00