Commit graph

39386 commits

Author SHA1 Message Date
Tom Rini
b89dfcfd92 Merge git://git.denx.de/u-boot-rockchip 2016-08-27 15:22:30 -04:00
Kever Yang
bc2f8a5406 rockchip: rk3399: update MAINTAINER file
This patch add maintainer information for rk3399 evb.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-08-27 08:48:23 -06:00
Tom Rini
c6b968da78 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-08-26 17:05:01 -04:00
Tony Lindgren
1cfce74fe5 nand: Fix set_dev checks for no device
If we do nand device 0 command in u-boot on a device that has NAND support
enabled but no NAND chip, we can get data abort at least on omaps.

Fix the issue by replacing the check with nand_info[dev] as
suggested by Scott Wood. The check for name existed before because before
the array-to-pointer conversion there was no way to directly test
nand_info[dev] for emptiness.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-26 17:04:58 -04:00
Masahiro Yamada
c21fc7e223 treewide: fix "followings" to "following"
Most of them are my mistakes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-26 17:04:58 -04:00
Masahiro Yamada
88e1346e35 tools: moveconfig: add Xtensa GCC prefix to CROSS_COMPILE list
This is needed to move CONFIG options for the recently-added
xtfpga_defconfig.

The tarball of the pre-built toolchain can be downloaded from:
https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-26 17:04:57 -04:00
Stefan Agner
8f894a4d38 arm: cache: always flush cache line size for page table
The page table is maintained by the CPU, hence it is safe to always
align cache flush to a whole cache line size. This allows to use
mmu_page_table_flush for a single page table, e.g. when configure
only small regions through mmu_set_region_dcache_behaviour.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-08-26 17:04:56 -04:00
Stefan Agner
c5b3cabf4a arm: cache: add support for LPAE for region D$ behavior
Add LPAE support for mmu_set_region_dcache_behaviour. The function
is in use in some LPAE capable board such TI DRA7xx or NXP i.MX 7.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-08-26 17:04:56 -04:00
Tom Rini
e009bfa4f9 arch/arm/Kconfig: Whitespace correction
Use a tab not 8 spaces.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-26 17:04:55 -04:00
Tom Rini
067716bac5 ARM: Move SYS_CACHELINE_SIZE over to Kconfig
This series moves the CONFIG_SYS_CACHELINE_SIZE.  First, in nearly all
cases we are mirroring the values used by the Linux Kernel here.  Also,
so long as (and in this case, it is true) we implement flushes in hunks
that are no larger than the smallest implementation (and given that we
mirror the Linux Kernel, again we are fine) it is OK to align higher.
The biggest changes here are that we always use 64 bytes for CPU_V7 even
if for example the underlying core is only 32 bytes (this mirrors
Linux).  Second, we say ARM64 uses 64 bytes not 128 (as found in the
Linux Kernel) as we do not need multi-platform support (to this degree)
and only the Cavium ThunderX 88xx series has a use for such large
alignment.

Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Stefan Roese <sr@denx.de>
Cc: Nagendra T S <nagendra@mistralsolutions.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Steve Rae <steve.rae@raedomain.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: David Feng <fenghua@phytium.com.cn>
Cc: Alison Wang <b18965@freescale.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: York Sun <york.sun@nxp.com>
Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Aneesh Bansal <aneesh.bansal@freescale.com>
Cc: Saksham Jain <saksham.jain@nxp.com>
Cc: Qianyu Gong <qianyu.gong@nxp.com>
Cc: Wang Dongsheng <dongsheng.wang@nxp.com>
Cc: Alex Porosanu <alexandru.porosanu@freescale.com>
Cc: Hongbo Zhang <hongbo.zhang@nxp.com>
Cc: tang yuantian <Yuantian.Tang@freescale.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Hannes Schmelzer <oe5hpm@oevsv.at>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Christophe Ricard <christophe-h.ricard@st.com>
Cc: Anand Moon <linux.amoon@gmail.com>
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Carlo Caione <carlo@endlessm.com>
Cc: huang lin <hl@rock-chips.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Xu Ziyuan <xzy.xu@rock-chips.com>
Cc: "jk.kernel@gmail.com" <jk.kernel@gmail.com>
Cc: "Ariel D'Alessandro" <ariel@vanguardiasur.com.ar>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Bernhard Nortmann <bernhard.nortmann@web.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Whitten <ben.whitten@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Carlos Hernandez <ceh@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Ash Charles <ashcharles@gmail.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Daniel Allred <d-allred@ti.com>
Cc: Gong Qianyu <Qianyu.Gong@freescale.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Chin Liang See <clsee@altera.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
2016-08-26 17:04:46 -04:00
Jens Kuske
d5ac6eef91 sunxi: Tune H3 DRAM PLL to improve lock time
The H3 PLL5 used for DRAM barely manages to lock to the required
frequency before DRAM controller starts, sometimes leading to wrong
delay-line calibration results.
This patch changes the PLL tuning parameters to the same values as
boot0 used, which speeds up the locking and fixes the problem.

Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-26 16:58:37 +02:00
Hans de Goede
421c98d7d2 sunxi: display: Use PWM to drive backlight where applicable
When the backlight's pwm input is connected to a pwm output of the SoC,
actually use pwm to drive the backlight.

The mean reason for doing this is to fix the backlight turning off
for aprox. 1 second while the kernel is booting. This is caused by
the kernel actually using pwm to drive the backlight, so that it
can dim the backlight. First the pwm driver loads and switches the
pinmux for the pin driving the backlight's pwm input to the pwm
controller. Then about 1s later the actual backlight driver loads
and tells the pwm driver to actually update the pwm settings, which
have a power-on-reset value of "off".

An additional advantage is that this allows us to initatiate the
backlight at 80%, which is the kernel default, avoiding a brightness
change while the kernel loads.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed by: Peter Korsgaard <peter@korsgaard.com>
2016-08-26 16:58:37 +02:00
Hans de Goede
8d463c5a32 sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet
Add a defconfig and dts file for the Empire Electronix M712 tablet, this
is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on
the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV
wifi chip and a DMART06 (1238a4) accelerometer.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-26 16:58:36 +02:00
Hans de Goede
860fbdd41f sunxi: Sync dts files with upstream kernel
Sync dts files with the current (Aug 18th 2016) state of Maxime's
linux/sunxi/for-next repo.

Note this commit also updates configs/MSI_Primo81_defconfig,
adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary
because the tablet does not have a reachable uart so the dts sync
drops its serial0 alias.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-26 16:58:36 +02:00
Hans de Goede
a1243f7851 sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB
Add a defconfig and dts file for tablets using the generic inet-q972 PCB.

Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host,
micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot,
(mini) power-barrel and an usb wifi module.

This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet.

The dts files are identical to the ones submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-26 16:58:36 +02:00
Tom Rini
da968c7bfa Merge branch 'master' of git://git.denx.de/u-boot-i2c 2016-08-26 07:42:06 -04:00
Tom Rini
c733c18e35 Merge branch 'master' of git://www.denx.de/git/u-boot-marvell 2016-08-26 07:41:54 -04:00
Simon Baatz
bdf58c73ca tools: kwboot: patch destaddr only for SoCs with header version 1
Commit f4db6c976c ("arm: mvebu: Add runtime detection of UART (xmodem)
boot-mode") added a change to hdr->destaddr when dynamically patching an
image for UART boot mode.  With this change, kwboot ceases to work on
Kirkwood.

Thus, let's change hdr->destaddr only when we are patching an image with
header version 1 (Orion and Kirkwood use header version 0).

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Fixes: f4db6c976c ("arm: mvebu: Add runtime detection of UART (xmodem) boot-mode")
Cc: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-26 08:42:50 +02:00
Chris Packham
c90d7ab6b0 arm: mvebu: a38x: typo fix cpabilities -> capbilities
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-26 08:33:52 +02:00
Chris Packham
014a357bba arm: mvebu: a38x: update serdes error handling
Ensure appropriate error messages are generated. Previously all errors
indicated that the serdes was already in use. Now appropriate error
messages are given.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-26 08:33:44 +02:00
Chris Packham
148f00e7a7 spl: Remove unused CONFIG_SPL_SPI_* definitions
As of commit 88e34e5 ("spl: replace CONFIG_SPL_SPI_* with
CONFIG_SF_DEFAULT_*") these defines are not used. Remove them to avoid
confusion.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-26 08:33:34 +02:00
Chris Packham
d7b4731efd arm: mvebu: Add support for NAND interface on A-38x
The NAND interface on the Armada-38x series is similar to that on the
Armada-XP. The key difference is that the NAND ECC clock ratio is
provided via the DFX Server registers instead of the Core Clock.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-08-26 08:33:21 +02:00
Stefan Roese
03d6cd972e i2c: mvtwsi: Fix order of address bytes (high to low)
Patch f8a10ed1 [i2c: mvtwsi: Make address length variable] accidentally
inverted the sequence of address bytes sent to the I2C device. This
patch corrects this by sending the highest byte first and the lowest
byte last again.

Tested on theadorable Armada-XP board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Heiko Schocher <hs@denx.de>
2016-08-26 07:02:49 +02:00
Stephen Warren
4832c7f5f7 spi: tegra: fix hang in set_mode()
In tegra20_slink.c, the set_mode() function may be executed before the
SPI bus is claimed the first time, and hence the clocks to the SPI
controller may not be running. If so, any register read/write at this
time will hang the CPU. Fix this by ensuring the clock is running as soon
as the driver is probed. This is observed on the Tegra30 Beaver board.

Apply the same clock initialization fix to all other Tegra SPI drivers so
that if set_mode() is ever implemented there, the same bug will not appear.
Note that tegra114_spi.c already operates in this fashion.

The clock manipulation code is copied from claim_bus() to probe() rather
than moved. This ensures that any calls to set_speed() take effect; the
clock can't be set once during probe and left unchanged.

Fixes: 5cb1b7b395 ("spi: tegra20: Add support for mode selection")
Cc: Mirza Krak <mirza.krak@hostmobility.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 15:35:03 -07:00
Stephen Warren
6002c75c59 ARM: tegra: remove stale nvidia, bpmp I2C DT property
The nvidia,bpmp property is left over from an old BPMP I2C binding, and
shouldn't be present. Remove it from the SoC DT file, and update the
I2C driver not to parse it; the value wasn't used for anything any more
anyway.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 13:48:11 -07:00
Stephen Warren
eb3f68afbc ARM: tegra: fix Tegra186 SDHCI clock/reset names
The Tegra SDHCI binding dictates that the reseet name for the Tegra SDHCI
clock be "sdhci" not "sdmmc", and that the clock is accessed by index
rather than by name. Fix the Tegra186 DT and MMC driver to honor this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 13:47:49 -07:00
Stephen Warren
b4ee081e5a ARM: tegra: fix Tegra186 I2C clock name
The Tegra I2C binding dictates that the clock name for the Tegra I2C clock
be "div-clk" not "i2c". Fix the Tegra186 DT and I2C driver to honor this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-25 13:47:49 -07:00
Tom Rini
46fe9eb088 Merge branch 'master' of git://git.denx.de/u-boot-net 2016-08-23 07:20:36 -04:00
Tom Rini
1d3bcb66ee Prepare v2016.09-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-22 20:30:42 -04:00
Tom Rini
10ba92f69e fs-test.sh: Correct check_md5() test with newlines
The fs-test.sh script expected there to be a \n\r style newline at the
end of the output. This is no longer the case, so use 'tr' to remove the
\r that we get.

Fixes: (c5917b4b05 "dm: serial-uclass: Move a carriage return before a
        line feed")
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-22 19:37:56 -04:00
Dongpo Li
8c83c0303c net: mii: check phy advertising register when geting link status
When phy autoneg on, the link speed and duplex should be
determined by phy advertising register and
phy link partner ability register.
Check phy advertising register when geting phy link speed and
duplex if autoneg on.

Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:21:23 -05:00
karl beldan
05237f735e net: davinci_emac: Restore the internal MDIO accessors return values
The spatch series converting legacy drivers from miiphy_register to
mdio_register changed the return convention of the davinci_emac internal
MDIO accessors, making the internal code relying on it misbehaving:
no mdiodev get registered and U-Boot crashes when using net cmds in the
context of the old legacy net API.

ATM davinci_emac_initialize and cpu_eth_init don't return a proper value
in that case but fixing them would not avoid the crash.

This change is just a follow-up to the spatch pass, the MDIO accessors
of the mdiodev introduced by the spatch pass retain their proper values.

Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:21:20 -05:00
Hou Zhiqiang
c23c7d461f net/fm: Remove unused code of FMan QMI
The QMan is not used in FMan IM mode, so no QMI enqueue or QMI
dequeue are performed.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:21:16 -05:00
karl beldan
a51897b6c1 net: davinci_emac: Invalidate only the received portion of a buffer
ATM when receiving a packet the whole buffer is invalidated, this change
optimizes this behaviour.

Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-08-22 14:21:13 -05:00
karl beldan
6202b8f28c net: davinci_emac: Round up top tx buffer boundaries for dcache ops
check_cache_range() warns that the top boundaries are not properly
aligned when flushing or invalidating the buffers and make these
operations fail.

This gets rid of the remaining warnings:
CACHE: Misaligned operation at range

Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-08-22 14:21:09 -05:00
karl beldan
a02c232336 net: davinci_emac: Remove useless dcache ops on descriptors
ATM the rx and tx descriptors are handled as cached memory while they
lie in a dedicated RAM of the SoCs, which is an uncached area.
Removing the said dcache ops, while optimizing the logic and clarifying
the code, also gets rid of most of the check_cache_range() incurred
warnings:
CACHE: Misaligned operation at range

Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:21:06 -05:00
Joe Hershberger
1ff65d440d net: nfs: Simplify rpc_add_credentials()
We use an empty hostname, so remove all the "processing" of the
known-to-be-empty hostname and just write 0's where needed.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:21:02 -05:00
Joe Hershberger
998372b479 net: nfs: Use the tx buffer to construct rpc msgs
Instead of always allocating a huge temporary buffer on the stack and
then memcpy()ing the result into the transmit buffer, simply figure out
where in the transmit buffer the bytes will belong and write them there
directly as each message is built.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:58 -05:00
Joe Hershberger
d89ff2df33 net: nfs: Move some prints to debug statements
Much of the information is verbose and derived directly from the
environment. Only output in debug mode. This also saves about 300 bytes
from the code size.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:54 -05:00
Joe Hershberger
0517cc45e5 net: nfs: Use consistent names for the rpc_pkt
Use the same name throughout the nfs code and use the same member of the
union to avoid casts.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:51 -05:00
Joe Hershberger
c629c45f30 net: nfs: Correct a comment
The buffer is of 32-bit elements, not bytes.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:47 -05:00
Joe Hershberger
051ed9af8c net: nfs: Consolidate handling of NFSv3 attributes
Instead of repeating the same large snippet for dealing with attributes
it should be shared with a helper function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:43 -05:00
Joe Hershberger
347a901597 net: nfs: Fix lines that are too long
Fix complaints from checkpatch.pl.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:40 -05:00
Joe Hershberger
6279b49e6c net: nfs: Correct the reply data buffer size
The type of the buffer is uint32_t, but the parameter used to size it
is referring to bytes. Divide by the size of the array elements.

Strictly speaking, this shouldn't be needed at all... It could just be 1
just like the request.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:36 -05:00
Joe Hershberger
5280c76915 net: nfs: Share the file handle buffer for v2 / v3
The v3 handles can be larger than v2, but that doesn't mean we need a
separate buffer. Reuse the same (larger) buffer for both.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:32 -05:00
Guillaume GARDET
b0baca9820 net: NFS: Add NFSv3 support
This patch enables NFSv3 support.
If NFSv2 is available use it as usual.
If NFSv2 is not available, but NFSv3 is available, use NFSv3.
If NFSv2 and NFSv3 are not available, print an error message since NFSv4 is not supported.

Tested on iMX6 sabrelite with 4 Linux NFS servers:
  * NFSv2 + NFSv3 + NFSv4 server: use NFSv2 protocol
  * NFSv2 + NFSv3 server: use NFSv2 protocol
  * NFSv3 + NFSv4 server: use NFSv3 protocol
  * NFSv3 server: use NFSv3 protocol

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@konsulko.com>
Cc: joe.hershberger@ni.com
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:20 -05:00
Joe Hershberger
d23d7bd793 net: nfs: Remove unused define
Unreferenced, so remove the noise.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:15 -05:00
Joe Hershberger
f8b26c7adf net: nfs: Remove separate buffer for default name
There is no reason to store the default filename in a separate buffer
only to immediately copy it to the main name buffer. Just write it there
directly and remove the other buffer.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:11 -05:00
Joe Hershberger
aa7a648747 net: Stop including NFS overhead in defragment max
At least on bfin, this "specimen" is actually allocated in the BSS and
wastes lots of memory in already tight memory conditions.

Also, with the introduction of NFSv3 support, this waste got
substantially larger.

Just remove it. If a board needs a specific different defragment size,
that board can override this setting.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-22 14:20:08 -05:00
Tom Rini
c98b171e10 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-20 16:40:34 -04:00