Commit graph

10 commits

Author SHA1 Message Date
Marcel Ziswiler
10f4f3f569 imx53: synchronise device tree with linux
Synchronise device tree with linux v6.0-rc1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-10-24 13:43:21 +02:00
Oleksandr Suvorov
cdb18048f9 ARM: dts: imx: use generic name bus
Synchronize the u-boot and kernel imx device trees, using tuned
script from commit c0157bdcafa1 ("ARM: dts: imx: use generic name bus")

Per devicetree specification, generic names are recommended to be
used, such as bus.

i.MX AIPS is an AHB - IP bridge bus, so we could use bus as node
name.

Script:
sed -i "s/\<aips@/bus@/" arch/arm/dts/imx*.dtsi
sed -i "s/\<aips@/bus@/" arch/arm/dts/vf*.dtsi
sed -i "s/\<aips-bus@/bus@/" arch/arm/dts/imx*.dtsi
sed -i "s/\<aips-bus@/bus@/" arch/arm/dts/vf*.dtsi

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-10-07 16:53:50 +02:00
Marek Vasut
1d255904c3 ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux
Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 ,
this is needed to get NFC, UART, USBOTG DT nodes.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:12 +02:00
Steffen Dirkwinkel
c11599b473 arm: imx: add ipu to imx53.dts and set dm-pre-reloc
The ipu node in imx53 is needed for DM_VIDEO. We also need to set
u-boot,dm-pre-reloc to initialize before relocation.

Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-05-20 11:57:24 +02:00
Lukasz Majewski
552b1b3142 DTS: Provide USB host DTS description for i.MX53 devices
This code has been ported from Linux kernel - tag v5.1-rc2.
The difference from the kernel is the removal of:
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;

properties, which are not needed for correct u-boot operation (as PHY
setup is done in ehci-mx5.c file itself).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Ian Ray
3cc0e327f2 arm: imx: Add esdhc3/4 nodes to imx53.dtsi
These nodes are required by mx53ppd when built with CONFIG_DM_MMC=y.
They are copied from Linux 4.20.5.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Patrick Bruenn
77fd72ff8f arm: imx: Add esdhc1/2 nodes to imx53.dtsi
These nodes are required by CX9020 when build with CONFIG_DM_MMC=y
They are copied from Linux 4.20

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2019-01-28 20:55:46 +01:00
Lukasz Majewski
0a107afde6 dts: imx53: Add gpio and i2c nodes to imx53.dtsi file
Those DTS nodes has been ported from Linux kernel (v4.16)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-17 12:12:45 +02:00
Patrick Bruenn
d6abd1d539 arm: imx: add tzic interrupt controller for imx53
Since commit 999a78d5cf ("scripts/dtc: Update to upstream version v1.4.5-3-gb1a60033c110")
dtc warns about:
arch/arm/dts/imx53-cx9020.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/aips@50000000/serial@53fc0000
arch/arm/dts/imx53-cx9020.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/aips@50000000/ccm@53fd4000
arch/arm/dts/imx53-cx9020.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/aips@50000000/gpio@53fe4000
arch/arm/dts/imx53-cx9020.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/aips@60000000/sdma@63fb0000
arch/arm/dts/imx53-cx9020.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/aips@60000000/ethernet@63fec000

Fix this by adding a node for the tzic interrupt controller.
Copied from "<Linux>/arch/arm/boot/dts/imx53.dts"

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Patrick Bruenn
98d62e618b arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-16 12:57:12 +01:00