Commit graph

8 commits

Author SHA1 Message Date
Philipp Tomsich
3082775692 rockchip: mkimage: update rkimage to support pre-padded payloads
To simplify the creation of AArch64 SPL images for the RK3399, we
use the ENABLE_ARM_SOC_BOOT0_HOOK option and prepend 4 bytes of
padding at the start of the text section. This makes it easy for
mkimage to rewrite this word with the 'RK33' boot magic.

This change brings logic to calculate the header size and allocate
the header back in sync. For the RK3399 we now limit the header to
before the payload (i.e. the 'header0' and the padding up to the
actual image) and overwrite the first word (inserted by the
boot0-hook for this purpose) with the 'RK33' magic in-place.

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-04-04 20:01:57 -06:00
Philipp Tomsich
111bcc4fb6 rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399
The RK3399 boot code (running as AArch64) poses a bit of a challenge
for SPL image generation:
 * The BootROM will start execution right after the 4-byte header (at
   the odd instruction word loaded into SRAM at 0xff8c2004, with the
   'RK33' boot magic residing at 0xff8c2000).
 * The default padding (during ELF generation) for AArch64 is 0x0,
   which is an illegal instruction and the .text section needs to be
   naturally aligned (someone might locate a 64bit constant relative
   to the section start and unaligned loads trigger a fault for all
   privileged modes of an ARMv8)... so we can't simply define the
   CONFIG_SPL_TEXT_BASE option to the odd address (0xff8c2004).
 * Finally, we don't want to change the values used for padding of
   the SPL .text section for all ARMv8 targets to the instruction
   word encoding 'nop', as this would affect all padding in this
   section and might hide errors that would otherwise quickly trigger
   an illegal insn exception.

To deal with this situation, we modify the rkimage generation to
 - understand the fact that the RK3399 needs to pad the header to an
   8 byte boundary using an AArch64 'nop'
 - the necessary logic to adjust the header_size (which controls the
   location where the payload is copied into the image) and to insert
   this padding (AArch64 insn words are always little-endian) into
   the image following the 4-byte header magic.

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-04-04 20:01:57 -06:00
Heiko Stübner
cfbcdade76 rockchip: mkimage: Allow encoding of loader code in spl images
Rockchip SoCs allow the spl code to be rc4-encoded, not only the
image header, but only newer SoCs allow this encoding to be disabled.

The rk3188 is not part of those and requires its boot code to be
rc4-encoded with the regular key. So add the ability to do this
encoding via a setting on a per-soc basis when building spl images.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00
Jeffy Chen
7bf274b9ca rockchip: mkimage: use imagename to select spl hdr & spl size
Our chips may have different spl size and spl header, so
use imagename(passed by "mkimage -n") to select them now.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:29 -07:00
Jeffy Chen
5cc5b901e6 Revert "rockchip: Add max spl size & spl header configs"
This reverts commit 10b4615f9d7e177ec7fe644fbb2616e0e0956f6e

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:06 -07:00
Jeffy Chen
3641339eff rockchip: Add support for rk's second level loader
The Rockchip boot ROM could load & run an initial spl loader,
and continue to load a second level boot-loader(which stored
right after the initial loader) when it returns.
Modify idblock generation code to support it.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Jeffy Chen
6ae5860942 rockchip: Add max spl size & spl header configs
Our chips may have different max spl size and spl header, so
we need to add configs for that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Dropped CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
Added $(if...) to tools/Makefile to fix widespread build breakage
Signed-off-by: Simon Glass <sjg@chromium.org>

Series-changes: 8
- Drop CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
- Add $(if...) to tools/Makefile to fix widespread build breakage
2015-12-01 08:07:22 -07:00
Simon Glass
a131c1f442 rockchip: Add the rkimage format to mkimage
Rockchip SoCs require certain formats for code that they execute, The
simplest format is a 4-byte header at the start of a binary file. Add
support for this so that we can create images that the boot ROM understands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00