Commit graph

9 commits

Author SHA1 Message Date
Eugen Hristev
d65b84a1d0 ARM: dts: at91: update flexcom defines using include file
Replace the number in the flexcom-mode property with the define from the
include file.
This corresponds to the approach in Linux kernel.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-09-21 10:08:24 +03:00
Eugen Hristev
89bd68a748 ARM: dts: at91: fix the GPIO polarity for onewire
The GPIO polarity for onewire must be GPIO_ACTIVE_HIGH.
On previous versions this used to work as it looks like the right flag values
are being passed since :
https://lists.denx.de/pipermail/u-boot/2020-April/407195.html

And that series broke the old functionality for onewire nodes.
Some boards had the correct value for the polarity, but it wasn't clear
so I replaced it with the right macro for the flag, instead of an empty value.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-07-06 15:17:10 +03:00
Claudiu Beznea
c37d59a170 ARM: dts: sam9x60: use CCF compatibles for PMC
Use CCF compatible for PMC. With this, the board/SoC will be
able to boot.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Claudiu Beznea
ffd204f347 ARM: dts: sam9x60ek: add clock frequencies to board file
Slow Xtal and Main Xtal are board specific. Add their proper
frequency to board file.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Eugen Hristev
67fd5d85d1 ARM: dts: sam9x60ek: add i2c0 as flexcom0 subnode and eeprom memory
Add i2c0 bus as subnode to flx0.
Add eeprom memory as slave device to i2c0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Eugen Hristev
c69ce8029a ARM: dts: at91: sam9x60ek: add onewire support
Add support for onewire memory.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tudor Ambarus
228f9e0244 ARM: dts: at91: sam9x60ek: Enable qspi node
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Enable the qspi node together with the SST26VF064B qspi nor flash
memory. Booting from the QSPI NOR flash is now possible.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
885554360d ARM: dts: at91: sam9x60: Add macb0 Ethernet controller
Add Ethernet controller to dtsi file and enable it on sam9x60ek
platform connected with rmii.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
f99e0ad25a ARM: dts: Add dts files for sam9x60ek
add device tree files for sam9x60ek board with below changes.

- Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit)
- Add the reg property for the pinctrl node.
- Add the "u-boot,dm-pre-reloc" property to determine which nodes
  are used by the board_init_f stage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[prasanthi.chellakumar@microchip.com: fix style/whitespace issues]
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
[nicolas.ferre@microchip.com:
- fix gclk,
- fix pio/pinctrl controller definition and allow to have more
  than only PIOA for this SoC,
- removing pinctrl address]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com:
- use SAM9X60's compatible for pinctrl
- add drive strength and slew rate options for SDMMC0 pins.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com:
- u-boot,dm-pre-reloc property in dedicated file,
- fix pit len, starts from 0xFFFFFE40 and it is of len 0x10]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00