Commit graph

105 commits

Author SHA1 Message Date
Siva Durga Prasad Paladugu
31f7ce7f9b arm: zynq: Add an info message about post config
Post configuration cant be run at u-boot as u-boot
didn't has any info about the design.So,this patch
adds an info message that post config was not run
and needs to be run manually if needed.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Tien Fong Chee
3003c445b3 fpga: Replace char * with const char * for filename
Ensure the string for filename is always constant, otherwise it can be
corrupted by the writing.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:33 +02:00
Ang, Chee Hong
5097ba6177 ARM: socfpga: stratix10: Return valid error code from FPGA driver
This patch prevent the Stratix 10 FPGA driver incorrectly return the
transaction ID as the mailbox error code. It should always return the
actual mailbox error code from SDM firmware.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-02-18 13:00:54 +01:00
Luca Ceresoli
8df324a20b fpga: zynqmp: show an error message when FPGA programming fails
When FPGA programming fails, it does so silently, unless debugging
code is enabled. This makes it hard to detect problems in production
environments.

Print the error message unconditionally so the error doesn't go
unnoticed.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:43 +01:00
Ang, Chee Hong
877ec6ebbd arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
Enable 'fpga' command in u-boot. User will be able to use the FPGA
command to program the FPGA on Stratix10 SoC.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20 17:12:25 +01:00
Ang, Chee Hong
c41e660b6b arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver
Enable FPGA reconfiguration support for Stratix 10 SoC.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20 17:12:25 +01:00
Simon Goldschmidt
d5de3d4978 arm: socfpga: fpga: fix type of local variable
The 'status' variable in 'socfpga_load()' for both gen5 and arria10
is of type 'unsigned long' while it is always used as 'int' only.
Change it to 'int'.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-10-31 01:41:10 +01:00
Siva Durga Prasad Paladugu
fbf7fb0f9f fpga: zynqmp: Modify PL bitstream loading sequence
This patch modifies PL bitstream loading sequence as per
latest Xilfpga which supports all variants of bitstream images
generated from vivado and from bootgen. With this new change in
Xilfpga, uboot doesn't need to validate and swap bitstream as it will
be taken care inside Xilfpga. ZynqMP PL driver now checks for supporting
PMUFW version before skipping the validation and swap sequence as there
can be old PMUFW which doesn't supports this feature. In this case, driver
uses old way of PL bitstream loading sequence.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-26 10:15:00 +02:00
Michal Simek
a225f8100c fpga: Kconfig: Replace spaces with tabs
Trivial Kconfig cleanup. Use tabs instead of spaces.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-11 10:58:41 +02:00
Luis Araneda
d600c4f6b0 drivers: fpga: zynqpl: fix compilation with SPL
Disable the use of function zynq_loadfs when compiling
the driver for the SPL, as the following filesystem
functions are not found by the linker:
- fs_set_blk_dev
- fs_read
- fs_set_blk_dev
- fs_read
- fs_read

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:57 +02:00
Siva Durga Prasad Paladugu
37e3a36a54 xilinx: zynq: Add support to secure images
This patch basically adds two new commands for loadig secure
images.
1. zynq rsa adds support to load secure image which can be both
   authenticated or encrypted or both authenticated and encrypted
   image in xilinx bootimage(BOOT.bin) format.
2. zynq aes command adds support to decrypt and load encrypted
   image back to DDR as per destination address. The image has
   to be encrypted using xilinx bootgen tool and to get only the
   encrypted image from tool use -split option while invoking
   bootgen.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19 10:49:54 +02:00
Siva Durga Prasad Paladugu
a18d09ea38 fpga: zynqmp: Add secure bitstream loading for ZynqMP
This patch adds support for loading secure bitstreams on ZynqMP
platforms. The secure bitstream images has to be generated using
Xilinx bootgen tool.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01 11:37:31 +02:00
Siva Durga Prasad Paladugu
cedd48e2cd cmd: fpga: Add support to load secure bitstreams
This patch adds support to load secure bitstreams(authenticated or
encrypted or both). As of now, this feature is added and tested only
for xilinx bitstreams and the secure bitstream was generated using
xilinx bootgen tool, but the command is defined in more generic way.

Command example to load authenticated and device key
encrypted bitstream is as follows
"fpga loads 0 100000 2000000 0 1"

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-01 11:37:31 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Tien Fong Chee
4ae87a83a6 arm: socfpga: Fix with the correct polling on bit is set
Commit 2baa997240 ("arm: socfpga: Add FPGA driver support for Arria 10")
Polling on wrong cleared bit. Fix with correct polling on bit is set.

Fixes: 2baa997240 ("arm: socfpga: Add FPGA driver support for Arria 10")

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-04-27 01:04:08 +02:00
Siva Durga Prasad Paladugu
71723aaec5 fpga: zynq: Add delay after PCFG_PROG_B change
There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
31bcb3444c fpga: zynqmp: Fix the nonsecure bitstream loading issue
Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
19ed4b697b fpga: zynqmp: Update zynqmp_load() as per latest xilfpga
Latest xilfpga expects to set BIT5 of flags for nonsecure
bitsream and also expects length in bytes instead of words
This patch does the same.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:50 +02:00
Nitin Jain
b32e11a715 fpga: zynqmp: Add support to get the PCAP status for fpga info command
This patch adds support for ZynqMP platform to print FPGA PCAP status
for "fpga status" command.

Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Michal Simek
cda1e3fb0f fpga: Simplify error path in fpga_add
Check !desc earlier to simplify code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Reviewed-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-03-23 09:34:42 +01:00
Vipul Kumar
3990c9d627 arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the
values over to the defconfigs.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2018-02-28 13:00:25 -05:00
Vipul Kumar
f415834608 fpga: Added Kconfig support for FPGA_SPARTAN3
This patch added Kconfig support for FPGA_SPARTAN3 and migrates the
values over to the defconfigs.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2018-02-28 13:00:04 -05:00
Álvaro Fernández Rojas
48263504c8 wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:03:43 +05:30
Goldschmidt Simon
8b93a92f6d fpga: allow programming fpga from FIT image for all FPGA drivers
This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 16:09:39 +01:00
Tien Fong Chee
bd08ce8f5e arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes
Existing FPGA program write is always assume RBF data >= 32 bytes, so
any rbf data less than 32 bytes writing to FPGA would be failed.
This patch enhances the FPGA program write to support rbf data with
size >= 4 bytes.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2017-11-26 02:34:10 +01:00
Siva Durga Prasad Paladugu
d863909f36 fpga: xilinx: Avoid using local intermediate buffer
Dont use local temporary buffer for printing out the
info instead use directly from memroy. This fixes the
issue of stack corruprion due to local buffer overflow.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02 09:11:52 +02:00
Tien Fong Chee
2baa997240 arm: socfpga: Add FPGA driver support for Arria 10
Add FPGA driver support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26 10:31:44 +02:00
Tien Fong Chee
fa23ba1aa5 kconfig: Convert FPGA_SOCFPGA configuration to Kconfig
This converts the following to Kconfig:
   CONFIG_FPGA_SOCFPGA

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26 10:31:44 +02:00
Tien Fong Chee
6867e19a43 arm: socfpga: Restructure FPGA driver in the preparation to support A10
Move FPGA driver which is Gen5 specific code into Gen5 driver file
and keeping common FPGA driver intact. All the changes are still keeping
in driver/fpga/ and no functional change. Subsequent patch would move
FPGA manager driver from arch/arm into driver/fpga/.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-07-26 10:31:44 +02:00
Siva Durga Prasad Paladugu
7033ae272e fpga: zynqmppl: Reuse invoke_smc routine
Reuse invoke_smc() routine which is already defined
instead of duplicating same at multiple places.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20 16:42:13 +02:00
xypron.glpk@gmx.de
ea1e3f96c3 FPGA: drivers/fpga/ivm_core.c: incorrect printf
The number of arguments for printf does not match the
format string.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-18 10:29:23 -04:00
Michal Simek
3d4eb334ec fpga: zynqmp: Remove empty functions
Xilinx core files will take care about it.
There is no need to have these functions because they do nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Patrick Bruenn
98d62e618b arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-16 12:57:12 +01:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Siva Durga Prasad Paladugu
6b24501438 fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMP
Add PL bitstream dowload support for ZynqMP
Bitstream will be validated by uboot and loaded
to PL by invoking an smc instruction to ATF which route this request to
PMU FW which will take care of loading it to PL

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:21 +02:00
Michal Simek
6ded73aa97 fpga: Add Kconfig to fpga subsystem
Add missing Kconfig to fpga subsystem to be able
to add new options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22 07:33:14 +02:00
Robert P. J. Day
62a3b7dd08 Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-07-16 09:43:12 -04:00
Michal Simek
905bca6c2d fpga: Fix typo in function comment
Trivial patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:02 +02:00
Stefan Roese
ff9c4c535a fpga: altera: Add StratixV support
This patch adds support for programming of the StratixV FPGAs. Programming
is done in this case (board theadorable) via SPI. The board may provide
board specific code for bitstream programming.

This StratixV support will be used by the theadorable board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-03-24 09:47:43 +01:00
Vagrant Cascadian
a6f70a3d14 Fix spelling of "transferred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:16 -04:00
Dinh Nguyen
a409a8b85e Revert "arm: socfpga: set the fpga global bit to disable HPS to FPGA signals"
Apparently, the logic for the FPGA global bit is not universal between Gen5
and Gen10 devices is not the same. Disabling this bit, while applicable to
Gen10 devices, will break FPGA programming on Gen5 devices.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-02-04 12:43:21 +01:00
Siva Durga Prasad Paladugu
f72132673a fpga: xilinx: Check for substring in device ID validation
Check for substrings in deviceID validation check
so that it can support xa bitstreams also.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Dinh Nguyen
b00a21f088 arm: socfpga: set the fpga global bit to disable HPS to FPGA signals
We should be setting the FPGA Interface Group global bit that will correctly
disable all interfaces between the FPGA and HPS.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-01-16 07:07:22 +01:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Marek Vasut
bfa89d2ba8 arm: socfpga: Fix FPGA bitstream programming routine
In case the FPGA bitstream is aligned to 4 bytes, skip the
part of the assembler which handles unaligned bitstream.
Otherwise, that part will loop indefinitelly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08 14:14:04 +02:00
Michal Simek
e136eaeb4d fpga: xilinx: Show fpga info if defined
Show fpga_op->info even if desc->iface_fns is not defined.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-21 10:25:43 +01:00
Michal Simek
6cd68c811e fpga: xilinx: Check if fpga operations are defined
Ensure that operations are correctly setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-01-21 10:25:15 +01:00
Michal Simek
ebd322de43 fpga: Export fpga_get_desc for SPL
SPL needs to detect FPGA device which will be used
for loading bitstream.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21 10:25:02 +01:00
Suriyan Ramasami
d455d8789d fs: API changes enabling extra parameter to return size of type loff_t
The sandbox/ext4/fat/generic fs commands do not gracefully deal with files
greater than 2GB. Negative values are returned in such cases.

To handle this, the fs functions have been modified to take an additional
parameter of type "* loff_t" which is then populated. The return value
of the fs functions are used only for error conditions.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
[trini: Update board/gdsys/p1022/controlcenterd-id.c,
drivers/fpga/zynqpl.c for changes]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:49:04 -05:00