Commit graph

702 commits

Author SHA1 Message Date
Joe Hershberger
c97d59cbda MAKEALL: Fix kill_children
When building in parallel, make sure that we look up the children
based on the the actual process group id instead of just assuming
that the MAKEALL pid is the process group id.

Also ensure that logs from incomplete builds are deleted in the
process.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2012-12-06 11:23:00 -07:00
Stefan Roese
24dede480c MAKEALL: Add spear platform target to compile all SPEAr boards
Signed-off-by: Stefan Roese <sr@denx.de>
2012-11-07 01:29:46 +01:00
Tom Rini
ed296d206a MAKEALL: Add -s to '${MAKE} tidy' section
When BUILD_NBUILDS is > 1 we run the tidy command.  With the addition of
DocBook this now includes a -C doc/DocBook and a 'entering/leaving' pair
of messages happen.  Since we don't want to see what's being cleaned
here, we can just invoke make -s like we do when building.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-29 14:21:20 -07:00
Kim Phillips
33f336d528 MAKEALL: add a -C/--check option to enable build checking
thanks to Tom Rini for the good idea.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:03 -07:00
Tom Rini
61c0d6ae77 gth2: Remove this platform
After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:46 -07:00
Allen Martin
cce5d210e6 MAKEALL: fix per arch board lists
The LIST_arm rule included the Atmel boards twice (by virtue of
including both LIST_at91 and LIST_ARM9) and was missing all the
arm720t, arm946es, and arm1176 boards.  Change this list to use
boards_by_arch() which is less error prone.  After this change
"./MAKEALL arm" and "./MAKEALL -a arm" build the same boards.

Also fix up some missing and duplicate boards to arm, mips, and m68k.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
2012-09-25 13:28:05 -07:00
Allen Martin
aa2e279d2a MAKEALL: update to work with new boards.cfg syntax
Update MAKEALL to handle the optional SPL CPU field that was added to
boards.cfg.  This impacts the cases in MAKEALL that have to match
against CPU type (field 3).  In these cases use ':' as a field
separator to split the u-boot CPU from the SPL CPU.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-01 14:58:21 +02:00
Andy Fleming
033220e7a4 MAKEALL: Allow empty ERR directory
If we build everything correctly with multiple builds, and an
ERR directory had been previously created, we failed to report
that everything was fine because grep failed to find anything
in the ERR directory. Use grep -r, which doesn't complain if
there are no input files.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Tom Rini <trini@ti.com>
2012-08-09 21:22:05 +02:00
Joe Hershberger
b86a475c1a MAKEALL: Report boards with errors vs warnings
In the summary, indicate which boards errored and which boards merely
warned.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-05-22 10:19:04 +02:00
Joe Hershberger
b594bd6ab3 MAKEALL: Fix error reporting for BUILD_NBUILDS==1
This was broken by f588bb034d

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-05-22 10:18:17 +02:00
Andy Fleming
f50bf50d7f Improve MAKEALL parallel builds
The patch that added parallel builds broke MAKEALL -l, so this
fixes that. At the same time, it improves the termination so
that it shuts down the build threads if you cancel the build.
Lastly, it removes a bunch of debug code.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Wolfgang Denk <wd@denx.de>
2012-05-18 13:49:04 +02:00
Andy Fleming
bb1c01eaf6 Remove extra boards from LIST_ixp
pdnb3 and scpu are explicitly on LIST_ixp, even though they are
also specified in boards.cfg as having cpu ixp. This means that
they will be built twice when doing ./MAKEALL ixp, or ./MAKEALL arm.

This was pointless before, but actually breaks things if you launch
both builds at the same time, as they overwrite each other.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-05-18 13:44:40 +02:00
Andy Fleming
f588bb034d Allow for parallel builds and saved output
The MAKEALL script cleverly runs make with the appropriate options
to use all of the cores on the system, but your average U-Boot build
can't make much use of more than a few cores.  If you happen to have
a many-core server, your builds will leave most of the system idle.

In order to make full use of such a system, we need to build multiple
targets in parallel, and this requires directing make output into
multiple directories. We add a BUILD_NBUILDS variable, which allows
users to specify how many builds to run in parallel.
When BUILD_NBUILDS is set greater than 1, we redefine BUILD_DIR for
each build to be ${BUILD_DIR}/${target}. Also, we make "./build" the
default BUILD_DIR when BUILD_NBUILDS is greater than 1.

MAKEALL now tracks which builds are still running, and when one
finishes, it starts a new build.

Once each build finishes, we run "make tidy" on its directory, to reduce
the footprint.

As a result, we are left with a build directory with all of the built
targets still there for use, which means anyone who wanted to use
MAKEALL as part of a test harness can now do so.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-04-30 16:52:19 +02:00
Marek Vasut
9b96c6b11f MAKEALL: Add -m/-M option to determine maintainers
The -m option tries to find the board in MAINTAINERS file and figure out the
email. The -M option lists boards including their maintainers emails and all
affiliated emails. There are multiple strategies used to retrieve these emails:

1) Check board/<boardname> with git log and use three most recent emails
2) Check board/<boardname> with git log and use three most used emails
3) Try finding board in MAINTAINERS file and retrieve all emails from there

The result is then sorted and unique results are retrieved and reported.

For -m option, only strategy 3) is used.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2012-03-30 22:34:58 +02:00
Scott Wood
0c18569606 MAKEALL: display SPL size if present
This makes it easier to detect changes in the SPL portion,
as can currently be done for the main U-Boot image.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Tom Rini <trini@ti.com>
2012-03-26 13:42:07 +02:00
Stefan Kristiansson
deddf5d2e3 openrisc: Add architecture to MAKEALL
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2012-01-13 21:17:04 +01:00
Wolfgang Denk
b9f31cc42c ARM: convert "omap730p2" boards to boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dave Peverley <dpeverley@mpc-data.co.uk>
Acked-by: Tom Rini <trini@ti.com>
2011-12-10 23:13:06 +01:00
Wolfgang Denk
c81f9cdd22 ARM: convert "omap16xx" boards to boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kshitij Gupta <kshitij@ti.com>
Acked-by: Tom Rini <trini@ti.com>
2011-12-10 23:12:12 +01:00
Wolfgang Denk
a276db28ca ARM: convert "apollon" board to use boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2011-12-10 23:10:36 +01:00
Daniel Schwierzeck
92b09095b6 MIPS: MAKEALL: fix lists for MIPSel and MIPS boards
Build dbau1550_el only in LIST_au1xx0_el and LIST_mips_el.
Also remove obsolete lists for mips5kc.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Thomas Lange <thomas@corelatus.se>
2011-12-09 10:53:37 +01:00
Marek Vasut
7f79c6f2f4 MAKEALL: Add -l option to only list build targets
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-06 22:14:40 +01:00
Stefano Babic
34b57d26f0 MAKEALL: drop obsolete mx31pdk_nand target
The mx31pdk can boot only from NAND and the target was
already updated in boards.cfg. mx31pdk_nand is obsolete
and is dropped.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-29 15:43:41 +01:00
Macpaul Lin
5f1719c105 adp-ag101: add board adp-ag101 support
Add evaluation board "adp-ag101" configuration file adp-ag101.h.
Add adp-ag101.c board config and related settings.
Add board adp-ag101 into boards.cfg

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22 00:54:25 +02:00
stany MARCEL
96d94385a7 ColdFire: Move boards with simple _config rules to boards.cfg
Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
2011-10-19 00:34:57 +08:00
Xiangfu Liu
3c945542da MIPS: Jz4740: Add qi_lb60 board support
Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device
from Qi hardware:

http://en.qi-hardware.com/wiki/Ben_NanoNote
http://en.qi-hardware.com/wiki/Main_Page
http://en.wikipedia.org/wiki/Qi_hardware

This Jz4740-based clamshell device does not use NOR flash to boot.
The initial bring-up assumes that U-Boot is directly loaded into SDRAM
using USB boot tool, and starts from 0x80100000.

About USB boot tool
-------------------

Jz4740 is one of the XBurst processors with USB boot functionality
supported.  The CPU can boot from a small ROM in the LSI, initialize
CPU and USB module, then wait for USB commands from the USB host.
We can send 8 KB binary data to the CPU cache using USB boot tool.

USB boot tool is available to the public at Ingenic website.  Also
there is an alternative Debian package named xburst-tools.

Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net>
Acked-by: Daniel <zpxu@ingenic.cn>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-10-12 23:28:49 +09:00
Mike Frysinger
c13f47b0d7 MAKEALL: rename coldfire list to m68k to match arch
The m68k tree is the only one where `./MAKEALL <arch>` does not work.
So rename the existing coldfire list in the MAKEALL script to m68k, and
add an alias from coldfire to m68k.  This makes scripting around MAKEALL
easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:14 +02:00
Wolfgang Denk
6a8760d748 MAKEALL: drop boards listed in boards.cfg
Pick them up automatically using $(boards_by_arch ...)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:02:53 +02:00
Wolfgang Denk
1b347fd661 MAKEALL: drop non-existent "versatile" configuration
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-09-10 00:01:49 +02:00
Wolfgang Denk
9c62815bf7 ARM: remove broken "modnet50" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Thomas Elste <info@elste.org>
2011-09-07 21:46:40 +02:00
Wolfgang Denk
d1a067a34a ARM: remove broken "lpc2292sodimm" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-09-07 21:46:40 +02:00
Wolfgang Denk
c1f8750f9f ARM: remove broken "impa7" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
2011-09-07 21:46:40 +02:00
Wolfgang Denk
26e670ea43 ARM: remove broken "evb4510" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>
2011-09-07 21:46:39 +02:00
Wolfgang Denk
c8f63b415f ARM: remove broken "ep7312" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
2011-09-07 21:46:39 +02:00
Wolfgang Denk
6aac646f58 ARM: remove broken "SMN42" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-09-07 21:45:34 +02:00
Wolfgang Denk
1b793a472e ARM: remove broken "voiceblue" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
ad218a868b ARM: remove broken "smdk2400" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
1f7f0edd3c ARM: remove broken "sbc2410x" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
6ea2405489 ARM: remove broken "netstar" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:14 +02:00
Wolfgang Denk
69624195a3 ARM: remove broken "mx1fs2" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
957731eda0 ARM: remove broken "lpd7a40x" boards
Remove lpd7a400 and lpd7a404 boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
716f7ade10 ARM: remove broken "edb93xx" boards
Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312,
edb9315 and edb9315a boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
5dcf53696f ARM: remove broken "B2" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
2011-09-04 11:36:13 +02:00
Wolfgang Denk
be28857072 ARM: remove broken "armadillo" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rowel Atienza <rowel@diwalabs.com>
2011-09-04 11:36:13 +02:00
Linus Walleij
23b3ae0fe8 integrator: convert to new build system
This deletes the integrator split_by_variant.sh script and
defines a number of unique board types for the core modules
that are meaningful to support for the Integrator AP/CP, i.e.
the ones that did not just say "unsupported core module" in
split_by_variant.sh. If more core modules need to be supported
they are easy to add.

We delete all the old cruft in Makefile and MAKEALL that was
working around the old way of building boards. We create a
unique config file per board to satisfy the build system, but
they are just oneliners that include the existing
integratorap.h and integratorcp.h configs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-09-03 22:40:46 +02:00
Dirk Behme
f37586bb14 MAKEALL ARMv7: Use boards.cfg
Use the boards from boards.cfg for building ./MAKEALL ARMV7.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2011-09-03 22:40:45 +02:00
Thomas Petazzoni
5cfeec5125 atmel: Update support of board AT91SAM9M10G45-EK to new style
Based on earlier work by Alex Waterman <awaterman@dawning.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2011-09-03 22:40:45 +02:00
Asen Dimov
eb6e608b32 make pm9g45 buildable for v2011.06 release
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

changed at91_serial_hw_init to at91_seriald_hw_init
2011-09-03 22:40:45 +02:00
Thomas Petazzoni
65b0f87a80 tny_a9260/tny_a9g20: update board to the new AT91 organization
Cc: Albin Tonnerre <tonnerrealbin@gmail.com>
CC: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2011-09-03 22:40:44 +02:00
Thomas Petazzoni
6785c7c84a sbc35_a9g20: update board to the new AT91 organization
Cc: Albin Tonnerre <tonnerrealbin@gmail.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Removed SBC35 from MAKEALL
2011-09-03 22:40:44 +02:00
Reinhard Meyer
97a470da03 MAKEALL: remove AT91 boards that are in boards.cfg
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-08-03 13:00:56 +02:00