Commit graph

49362 commits

Author SHA1 Message Date
Eugeniy Paltsev
c4ef14d2cc ARC: Cache: Remove per-line I$ operations as unused
__cache_line_loop() function was copied from Linux kernel
where per-line instruction cache operations are really used.

In U-Boot we use only entire I$ ops, so we can drop support of
per-line I$ ops from __cache_line_loop() because __cache_line_loop()
is never called with OP_INV_IC parameter.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 17:06:37 +03:00
Eugeniy Paltsev
16aeee81d9 ARC: Cache: Move I$ entire operation to a separate function
Move instruction cache entire operation to a separate function
because we are planing to use it in other places like
sync_icache_dcache_all().

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 17:06:29 +03:00
Alexey Brodkin
71621525c3 arc: Fine-tune implementation of memory barriers
We improve on 2 things:
 1. Only ARC HS family has "dmb" instructions so do compile-time
    check for automatically defined macro __ARCHS__.
    Previous check for ARCv2 ISA was not good enough because ARC EM
    family is v2 ISA as well but still "dmb" instaruction is not
    supported in EM family.

 2. Still if there's no dedicated instruction for memory barrier
    let's at least insert compile-time barrier to make sure
    compiler deosn't reorder critical memory operations.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 16:21:34 +03:00
Alexey Brodkin
264d298fda arc: Introduce a possibility to not relocate U-boot
Disabling relocation might be useful on ARC for 2 reasons:
 a) For advanced debugging with Synopsys proprietary MetaWare debugger
    which is capable of accessing much more specific hardware resources
    compared to gdb. For example it may show contents of L1 and L2 caches,
    internal states of some hardware blocks etc.

    But on the downside MetaWare debugger still cannot work with PIE.
    Even though that limitation could be work-arounded with change of ELF's
    header and stripping down all debug info but with it we won't have
    debug info for source-level debugging which is quite inconvenient.

 b) Some platforms which might benefit from usage of U-Boot basically
    don't have enough RAM to accommodate relocation of U-Boot so we
    keep code in flash and use as much of RAM as possible for more
    interesting things.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefan Roese <sr@denx.de>
2018-03-21 16:21:34 +03:00
Alexey Brodkin
fac4790491 arc: Eliminate unused code and data with GCC's garbage collector
Finally GCC's garbage collector works on ARC so let's use it.
That's what I may see for HSDK:

Before:
   text	   data	    bss	    dec	    hex	filename
 290153	  10068	 222616	 522837	  7fa55	u-boot

After:
   text	   data	    bss	    dec	    hex	filename
 261999	   9460	 222360	 493819	  788fb	u-boot

Overall ~5% of memory footprint saved.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 16:21:34 +03:00
Alexey Brodkin
0a097ba54b arc: Don't halt slaves
This commit basically reverts two commits:
 1. cf628f772e ("arc: arcv1: Disable master/slave check")
 2. 6cba327bd9 ("arcv2: Halt non-master cores")

With mentioned commits in-place we experience more trouble than
benefits. In case of SMP Linux kernel this is really required as
we have all the cores running from the very beginning and then we
need to allow master core to do some preparatory work while slaves
are not getting in the way.

In case of U-Boot we:
 a) Don't really run more than 1 core in parallel
 b) We may use whatever core for that

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 16:21:34 +03:00
Alexey Brodkin
2178817c4a arc: Get rid of handwritten string routines
U-Boot is a bit special piese of software because it is being
only executed once on power-on as compared to operating system
for example. That's why we don't care much about performance
optimizations instead we're more concerned about size. And up-to-date
compilers might produce much smaller code compared to
performance-optimized routines copy-pasted from the Linux kernel.

Here's an example:
------------------------------->8--------------------------
--- size_asm_strings.txt
+++ size_c_strings.txt
@@ -1,2 +1,2 @@
    text	   data	    bss	    dec	    hex	filename
- 121260	   3784	   3308	 128352	  1f560	u-boot
+ 120448	   3784	   3308	 127540	  1f234	u-boot
------------------------------->8--------------------------

See we were able to shave off ~800 bytes of .text section.

Also usage of string routines implemented in C gives us an ability
to support more HW flavors for free: generated instructions will match
our target as long as correct compiler option is used.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-21 16:21:34 +03:00
Tom Rini
9c0e2f6ed3 Merge git://git.denx.de/u-boot-fsl-qoriq 2018-03-20 18:39:27 -04:00
Vinitha V Pillai
3386c73d46 LS2088ARDB: Secure Boot: Fix fall back option failure
Fix NOR, SD and QSPI fallback option in case of secure boot failure.

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:30:52 -07:00
Ashish Kumar
c1c597e8a8 armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
IFC-NOR and QSPI-NOR pins are multiplexed on SoC, so they cannot be
accessed simultaneously. IFC-NOR can be accessed along with SD-BOOT.

Ls1088aqds_sdcard_ifc_defconfig is default config for SD boot and
IFC-NOR to be used as flash. This allows writing to IFC-NOR flash.
QSPI and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated using ls1088aqds_defconfig.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:27:13 -07:00
Ashish Kumar
169d493bb7 armv8: ls1088a: Add i2c_early_init() func for LS1088AQDS
This function is required for enabling access to early i2c function
for correct usage of QIXIS_READ and QIXIS_WRITE.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:26:52 -07:00
Ashish Kumar
d12b166a00 armv8: ls1088a: Add clock related function in CONFIG_SPL_BUILD
get_board_ddr_clk(), get_board_sys_clk() and if_board_diff_clk() is
now available for SPL build.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:26:02 -07:00
Ashish Kumar
b555e293b3 armv8: ls1088qds: Remove CONFIG_ from local defines for FPGA
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:25:34 -07:00
Tom Rini
da773532cd Merge git://git.denx.de/u-boot-usb 2018-03-19 20:10:15 -04:00
Tom Rini
c17848a798 Merge git://git.denx.de/u-boot-sunxi 2018-03-19 18:39:14 -04:00
Bryan O'Donoghue
c225e7cf54 bootm: optee: Add a bootm command for type IH_OS_TEE
This patch makes it possible to verify the contents and location of an
OPTEE image in DRAM prior to handing off control to that image. If image
verification fails we won't try to boot any further.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Andrew F. Davis <afd@ti.com>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:25 -04:00
Bryan O'Donoghue
45b55712d4 image: Add IH_OS_TEE for TEE chain-load boot
This patch adds a new type IH_OS_TEE. This new OS type will be used for
chain-loading to Linux via a TEE.

With this patch in-place you can generate a bootable OPTEE image like this:

mkimage -A arm -T kernel -O tee -C none -d tee.bin uTee.optee

where "tee.bin" is the input binary prefixed with an OPTEE header and
uTee.optee is the output prefixed with a u-boot wrapper header.

This image type "-T kernel -O tee" is differentiated from the existing
IH_TYPE_TEE "-T tee" in that the IH_TYPE is installed by u-boot (flow
control returns to u-boot) whereas for the new IH_OS_TEE control passes to
the OPTEE firmware and the firmware chainloads onto Linux.

Andrew Davis gave the following ASCII diagram:

IH_OS_TEE: (mkimage -T kernel -O tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL
     |
     v
   U-Boot ------>
          <-----  OP-TEE
      |
      V
    Linux

IH_TYPE_TEE: (mkimage -T tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL ------->
         <-----  OP-TEE
     |
     v
   U-Boot
      |
      V
    Linux

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Andrew F. Davis <afd@ti.com>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Link: http://mrvan.github.io/optee-imx6ul
2018-03-19 16:14:25 -04:00
Bryan O'Donoghue
6ffc420045 optee: Add error printout
When encountering an error in OPTEE verification print out various details
of the OPTEE header to aid in further debugging of encountered errors.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:25 -04:00
Bryan O'Donoghue
c5a6e8bd00 optee: Add optee_verify_bootm_image()
This patch adds optee_verify_bootm_image() which will be subsequently used
to verify the parameters encoded in the OPTEE header match the memory
allocated to the OPTEE region, OPTEE header magic and version prior to
handing off control to the OPTEE image.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:24 -04:00
Bryan O'Donoghue
dd5a12e287 optee: Add optee_image_get_load_addr()
This patch adds optee_image_get_load_addr() a helper function used to
calculate the load-address of an OPTEE image based on the lower
entry-point address given in the OPTEE header.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:24 -04:00
Bryan O'Donoghue
f79443684b optee: Add optee_image_get_entry_point()
Add a helper function for extracting the least significant 32 bits from the
OPTEE entry point address, which will be good enough to load OPTEE binaries
up to (2^32)-1 bytes.

We may need to extend this out later on but for now (2^32)-1 should be
fine.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:24 -04:00
Bryan O'Donoghue
f25006b96e optee: Add CONFIG_OPTEE_LOAD_ADDR
CONFIG_OPTEE_LOAD_ADDR is used to tell u-boot where to load the OPTEE
binary into memory prior to handing off control to OPTEE.

We need to pull this value out of u-boot in order to produce an IMX IVT/CSF
signed pair for the purposes of secure boot. The best way to do that is to
have CONFIG_OPTEE_LOAD_ADDR appear in u-boot.cfg.

Adding new CONFIG entires to u-boot should be kconfig driven so this patch
does just that.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
2018-03-19 16:14:24 -04:00
Bryan O'Donoghue
35499baf3b optee: Add CONFIG_OPTEE_TZDRAM_BASE
OPTEE is currently linked to a specific area of memory called the TrustZone
DRAM. This patch adds a CONFIG entry for the default address of TrustZone
DRAM that a board-port can over-ride. The region that U-Boot sets aside for
the OPTEE run-time should be verified before attempting to hand off to the
OPTEE run-time. Each board-port should carefully ensure that the TZDRAM
address specified in the OPTEE build and the TZDRAM address specified in
U-Boot match-up.

Further patches will use TZDRAM address with other defines and variables to
carry out a degree of automated verification in U-Boot prior to trying to
boot an OPTEE image.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-19 16:14:24 -04:00
Bryan O'Donoghue
d89a5aa6d0 optee: Add CONFIG_OPTEE_TZDRAM_SIZE
OPTEE is currently linked to a specific area of memory called the TrustZone
DRAM. This patch adds a CONFIG entry for the default size of TrustZone DRAM
that a board-port can over-ride. The region that U-Boot sets aside for the
OPTEE run-time should be verified before attempting to hand off to the
OPTEE run-time. Each board-port should carefully ensure that the TZDRAM
size specified in the OPTEE build and the TZDRAM size specified in U-Boot
match-up.

Further patches will use TZDRAM size with other defines and variables to
carry out a degree of automated verification in U-Boot prior to trying to
boot an OPTEE image.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:23 -04:00
Bryan O'Donoghue
32ce6179fb optee: Add lib entries for sharing OPTEE code across ports
This patch adds code to lib to enable sharing of useful OPTEE code between
board-ports and architectures. The code on lib/optee/optee.c comes from the
TI omap2 port. Eventually the OMAP2 code will be patched to include the
shared code. The intention here is to add more useful OPTEE specific code
as more functionality gets added.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-19 16:14:23 -04:00
Stefan Roese
5cf32518ea MAINTAINERS: Remove unused ppc4xx entry
ppc4xx support was removed some time ago. Lets remove the now unused
entry in MAINTAINERS as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19 16:14:23 -04:00
Stefan Roese
ed68ccbf42 pci: Remove unused ppc4xx variable from struct pci_controller
ppc4xx support was removed some time ago. Lets remove the now unused
"pci_fb" variable from "struct pci_controller" as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
2018-03-19 16:14:23 -04:00
Stefan Roese
ec9c80d643 nand: Remove unused ppc4xx NAND driver and references
ppc4xx support was removed some time ago. Lets remove the now unused
NAND driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Scott Wood <oss@buserror.net>
2018-03-19 16:14:23 -04:00
Patrick Delaunay
f8598d9815 board: st: add generic board for STM32MP1 family
Add first support for STM32MP157C-ED1 board with "Basic" boot chain
1/ Boot Rom: load SPL with STM32 image header in SYSRAM
2/ SPL: power up and initialize the DDR and load U-Boot image
        from SDCARD in DDR
3/ U-Boot: search and load extlinux.conf in SDCARD
           (DISTRO activated)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
3d2d115a30 dts: add device tree for STM32MP157C-ED1 board
Add minimal devicetree for STM32MP157C-ED1 board,
with only the devices to allow boot from SDCARD:
- RCC for clock and reset
- UART4 for console
- I2C and PMIC
- DDR
- SDMMC0 for SDCard

Waiting Kernel upstream for alignment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
266fa4df00 clk: stm32mp1: add clock tree initialization
add binding and code for clock tree initialization from device tree

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
a6151916cb clk: add driver for stm32mp1
add RCC clock driver for STMP32MP157
- base on driver model = UCLASS_CLK
- support ops to enable, disable and get rate
  of all SOC clock needed by U-Boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
a7519b3324 reset: stm32: adapt driver for stm32mp1
- move to livetree and allow to get address to parent
- add stm32mp1 compatible for probe

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
8aeba629cc pinctrl: stm32: update pincontrol for stmp32mp157
- add the 2 new compatible used by STM32MP157
	"st,stm32mp157-pinctrl"
	"st,stm32mp157-z-pinctrl"
- update the mask for the port

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
5d0c74e624 pmic: add stpmu1 support
This driver implements register read/write operations for STPMU1.

The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF
and 2 power switches. It is accessed via an I2C interface.
This device is used with STM32MP1 SoCs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
e70f70aa65 ram: stm32mp1: add driver
Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
2514c2d0e6 arm: stm32: add new architecture for STM32MP family
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A
- support for stm32mp157 SOC
- SPL is used as first boot stage loader
- using driver model for all the drivers, even in SPL
- all security feature are deactivated (ETZC and TZC)
- reused STM32 MCU drivers when it is possible

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
35746c0138 stm32mp: stm32f7_i2c: use calloc instead of kmalloc
Kmalloc is using memalign allocation function. It is not necessary to
align this structure so to save bytes, we move to calloc.

And kmalloc function can't be used in SPL early stage (in board_init_f())

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
f11c308ac2 gpio: stm32f7_gpio: handle node ngpios
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:20 -04:00
Patrick Delaunay
d876eaf2be dm: gpio: Convert stm32f7 driver to livetree
Update the GPIO driver to support a live device tree.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:20 -04:00
Patrick Delaunay
77aace579a arm: armv7: solve issue for timer_rate_hz in arch timer
The current value timer_rate_hz causes a problem with function
timer_get_us() from lib time and then an issue with
readx_poll_timeout() function.

With corrected value for tbclk() = timer_rate_hz = CONFIG_SYS_HZ_CLOCK
the weak functions in lib timer can be used:
- get_timer()
- __udelay()
So the specific function in this file are removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:20 -04:00
Patrick Delaunay
0e373c0ade spl: add SPL_RESET_SUPPORT
Add option to include RESET driver and uclass in SPL.
That can be useful to handle IP reset with same driver
in U-Boot and in SPL.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:20 -04:00
Patrick Delaunay
81260e3331 tools/mkimage: add support for STM32 image format
STM32MP157 bootrom needs a specific header for first boot stage.
This patch adds support of this header in mkimage.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:19 -04:00
Alex Kiernan
dbc3432379 tools: env: Implement atomic replace for filesystem
If the U-Boot environment is stored in a regular file and redundant
operation isn't set, then write to a temporary file and perform an
atomic rename.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19 16:14:19 -04:00
Alex Kiernan
899b5338fa tools: env: Refactor write path of flash_io()
Extract write path of flash_io() into a separate function. This patch
should be a functional no-op.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-03-19 16:14:19 -04:00
Alex Kiernan
2deb3cac08 tools: env: Fix CamelCasing style violation
Replace HaveRedundEnv with have_redund_env to fix style violation.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19 16:14:19 -04:00
Alex Kiernan
c7f52c4b6e tools: env: Pass through indent
Pass tools/env/fw_env.c through indent to correct style violations. This
commit consists of only one non-whitespace change:

  tools/env/fw_env.c:549: error: do not use assignment in if condition

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-19 16:14:19 -04:00
Jun Nie
5c643db4cc SPL: Add signature verification when loading image
U-boot proper signature is not verified by SPL on most platforms
even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape
platform support secure boot in platform specific code. So
verified boot cannot be achieved if u-boot proper is loaded by
SPL.

This patch add signature verification to u-boot proper images
when loading FIT image in SPL. It is tested on Allwinner bananapi
zero board with H2+ SoC.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-03-19 09:59:32 -04:00
Tom Rini
50905b55c7 Merge git://git.denx.de/u-boot-video 2018-03-19 09:56:34 -04:00
Jagan Teki
0354f4bef0 sunxi: Add DRAM_SUN8I_A83T kconfig entry
Add proper and simple kconfig option for dram_sun8i_a83t.c
instead of using MACH type on Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-19 16:46:47 +05:30