Commit graph

5622 commits

Author SHA1 Message Date
Jeroen Hofstee
c5fe2532ac video: ipu: prevent warnings with W=1
- make local functions static
- remove unused is_interlaced function

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:27:37 -04:00
Jeroen Hofstee
19d7bf3d86 tegra: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:27:37 -04:00
Jeroen Hofstee
654f8d0f3d serial: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:02 -04:00
Jeroen Hofstee
6588c78bf3 sdhci: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:02 -04:00
Jeroen Hofstee
441529795c omap_gpmc: fix warnigs with W=1
- make omap_spl_dev_ready static
- make omap_reverse_list static, move to under CONFIG_NAND_OMAP_ELM

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25 07:02:02 -04:00
Jeroen Hofstee
84f64c8bbe net: fec_mxc: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:02 -04:00
Jeroen Hofstee
2115d89db8 gpio: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:01 -04:00
Jeroen Hofstee
2d17b48911 ehci-hcd.c: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:00 -04:00
Jeroen Hofstee
69d2754588 video: use __weak
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:00 -04:00
Jeroen Hofstee
3dd80aae3a usb: use __weak
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:00 -04:00
Jeroen Hofstee
7b19fd6d9f pci: use __weak
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:01:59 -04:00
Jeroen Hofstee
3c6928fd7b net: phy: fix warnings with W=1
get_phy_id is marked weak but has no protype nor a
strong version, just make it static. Use __weak for
board_phy_config.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:01:59 -04:00
Jeroen Hofstee
00dcb07c54 cti_flash.c: use __weak when requested for flash_(read|write){8,16,32,64}
For various reasons (design, errata) boards may need to implement their
own versions of these accessors.  So in the case of
CONFIG_CFI_FLASH_USE_WEAK_ACCESSOR mark the functions as weak.  In the
normal case mark them as static to allow for better optimization.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
[trini: Reword commit message]
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25 06:58:51 -04:00
Tom Rini
03a3536c7b Merge branch 'master' of git://git.denx.de/u-boot-tegra 2014-10-23 14:05:34 -04:00
Stefan Roese
6d5fe560a5 i2c: mvtwsi: Add support for Marvell Armada XP
To support the Armada XP SoC, we just need to include the correct header.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23 09:59:21 -04:00
Stefan Roese
19fc2eae6d net: mvneta.c: Add support for the ethernet controller of the Marvell Armada XP SoC
This patch adds support for the NETA ethernet controller which is integrated
in the Marvell Armada XP SoC's. This port is based on the Linux driver which
has been stripped of the in U-Boot unused portions.

Tested on the Marvell MV78460 eval board db-78460-bp.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23 09:59:21 -04:00
Stefan Roese
4fd7717e8e spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE
This makes is possible to use this SPI driver from other MVEBU SoC's as well.
As the upcoming Armada XP support will do.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23 09:59:21 -04:00
Stefan Roese
4aceea2088 spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's
Compile the pin multiplexing only on Kirkwood platforms. As the
Armada XP doesn't need it.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23 09:59:21 -04:00
Stefan Roese
3e972cb9ba arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h
This move makes it possible to use this kirkwood SPI driver from other
MVEBU platforms as well. This will be used by the upcoming Armada XP
support.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23 09:59:20 -04:00
Stefan Roese
3dc23f7852 arm: marvell: Move arch/kirkwood.h to arch/soc.h
This move makes is possible to use this header not only from kirkwood
platforms but from all Marvell mvebu platforms.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-23 09:59:20 -04:00
Tom Rini
dee8abcd80 Merge git://git.denx.de/u-boot-x86 2014-10-23 06:54:03 -04:00
Simon Glass
f1269925f9 x86: cros_ec: Update LPC driver for new cros_ec header
There was a minor rename of one of the defines, so update the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 21:50:32 -06:00
Simon Glass
8a9cd5ad6f dm: serial: Support driver model in pl01x driver
Add driver model support in this driver, using platform data provided by
the board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22 10:36:57 -06:00
Simon Glass
aed2fbef5e dm: serial: Tidy up the pl01x driver
Adjust the driver so that leaf functions take a pointer to the serial port
register base. Put all the global configuration in the init function, and
use the same settings from then on.

This makes it much easier to move to driver model without duplicating the
code, since with driver model we use platform data rather than global
settings.

The driver is compiled with either the CONFIG_PL010_SERIAL or
CONFIG_PL011_SERIAL option and this determines the uart type. With driver
model this needs to come in from platform data, so create a new
CONFIG_PL01X_SERIAL config which brings in the driver, and adjust the
driver to support both peripheral variants.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22 10:36:57 -06:00
Simon Glass
41e98e011d dm: rpi: Convert GPIO driver to driver model
Convert the BCM2835 GPIO driver to use driver model, and switch over
Raspberry Pi to use this, since it is the only board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22 10:36:57 -06:00
Simon Glass
da802b9e27 dm: core: Add support for simple-bus
Add a driver for the simple-bus nodes, which allows devices within these
nodes to be bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:56 -06:00
Simon Glass
a8ba569cba dm: imx: serial: Support driver model in the MXC serial driver
Add driver model support with this driver. Boards which use this driver
should define platform data in their board files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:56 -06:00
Simon Glass
441d0cfff1 dm: imx: gpio: Support driver model in MXC gpio driver
Add driver model support with this driver. In this case the platform data
is in the driver. It would be better to put this into an SOC-specific file,
but this is best attempted when more boards are moved over to use driver
model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2014-10-22 10:36:56 -06:00
Simon Glass
b8893327e9 dm: serial: Put common code into separate functions
Avoid duplicating the code which deals with getc() and putc(). It is fairly
simple, but may expand later.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:54 -06:00
Simon Glass
ea0ebc8662 dm: exynos: cros_ec: Move cros_ec_spi to driver model
Adjust this driver to use driver model and move smdk5420 boards over to
use it.

Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:53 -06:00
Simon Glass
be995a8545 dm: sandbox: cros_ec: Move sandbox cros_ec to driver module
Adjust the sandbox cros_ec emulation driver to work with driver model, and
switch over to driver model for sandbox cros_ec.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:53 -06:00
Simon Glass
84d6cbd302 dm: cros_ec: Add support for driver model
Add support for driver model if enabled. This involves minimal changes
to the code, mostly just plumbing around the edges.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:53 -06:00
Simon Glass
fda6fac39b dm: tegra: spi: Convert to driver model
This converts the Tegra SPI drivers to use driver model. This is tested
on:

- Tegra20 - trimslice
- Tegra30 - beaver
- Tegra124 - dalmore

(not tested on Tegra124)

Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:52 -06:00
Simon Glass
b6c2956def dm: sf: sandbox: Convert SPI flash driver to driver model
Convert sandbox's spi flash emulation driver to use driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:51 -06:00
Simon Glass
fbb099183e dm: Convert spi_flash_probe() and 'sf probe' to use driver model
We want the SPI flash probing feature to operate as a standard driver.
Add a driver for the basic probing feature used by most boards. This
will be activated by device_probe() as with any other driver.

The 'sf probe' command currently keeps track of the SPI slave that it
last used. This doesn't work with driver model, since some other driver
or system may have probed the device and have access to it too. On the
other hand, if we try to probe a device twice the second probe is a nop
with driver model.

Fix this by searching for the matching device, removing it, and then
probing it again. This should work as expected regardless of other device
activity.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Simon Glass
4c2dbefde5 dm: sf: Add a uclass for SPI flash
Add a driver model uclass for SPI flash which supports the common
operations (read, write, erase). Since we must keep support for the
non-dm interface, some modification of the spi_flash header is required.

CONFIG_DM_SPI_FLASH is used to enable driver model for SPI flash.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Simon Glass
ae242cbfd0 spi: Use error return value in sf_ops
Adjust spi_flash_probe_slave() to return an error value instead of a
pointer so we get the correct error return.

Have the caller allocate memory for spi_flash to simplify error handling,
and also so that driver model can use its existing allocated memory.

Add a spi.h include in the sf_params file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Simon Glass
ff0960f9a0 sf: Tidy up public and private header files
Since spi_flash.h is supposed to be the public API for SPI flash, move
private things to sf_internal.h. Also tidy up a few comment nits.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Simon Glass
73186c9460 dm: exynos: Convert SPI to driver model
Move the exynos SPI driver over to driver model. This removes quite a bit
of boilerplate from the driver, although it adds some for driver model.

A few device tree additions are needed to make the SPI flash available.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:49 -06:00
Simon Glass
623b638607 dm: spi: Add soft_spi implementation
Add a new implementation of soft_spi that uses device tree to specify the
GPIOs. This will replace soft_spi_legacy for boards which use driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:48 -06:00
Simon Glass
44ba6b0ecc dm: spi: Remove SPI_INIT feature
This feature provides for init of a single SPI port for the soft SPI
feature. It is not really compatible with driver model since it assumes a
single SPI port. Also, inserting SPI init into the driver by means of
a #define is not very nice.

This feature is not used by any active boards, so let's remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:48 -06:00
Simon Glass
a666f39e4e dm: spi: Rename soft_spi.c to soft_spi_legacy.c
Reserve the 'normal' name for use by driver model, and rename the old
driver so that it is clear that it is for 'legacy' drivers only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:48 -06:00
Simon Glass
49b5d6e6e2 dm: sandbox: spi: Move to driver model
Adjust the sandbox SPI driver to support driver model and move sandbox over
to driver model for SPI.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:48 -06:00
Simon Glass
843c9e8796 dm: Add spi.h header to a few files
Some files are using SPI functions but not explitly including the SPI
header file. Fix this, since driver model needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:47 -06:00
Simon Glass
c60e1f2547 dm: sandbox: Add a SPI emulation uclass
U-Boot includes a SPI emulation driver already but it is not explicit, and
is hidden in the SPI flash code.

Conceptually with sandbox's SPI implementation we have a layer which
creates SPI bus transitions and a layer which interprets them, currently
only for SPI flash. The latter is actually an emulation, and it should be
possible to add more than one emulation - not just SPI flash.

Add a SPI emulation uclass so that other emulations can be plugged in to
support different types of emulated devices on difference buses/chip
selects.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:46 -06:00
Simon Glass
d7af6a4851 dm: spi: Add a uclass for SPI
Add a uclass which provides access to SPI buses and includes operations
required by SPI.

For a time driver model will need to co-exist with the legacy SPI interface
so some parts of the header file are changed depending on which is in use.
The exports are adjusted also since some functions are not available with
driver model.

Boards must define CONFIG_DM_SPI to use driver model for SPI.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
(Discussed some follow-up comments which will address in future add-ons)
2014-10-22 10:36:46 -06:00
Simon Glass
accd4b19b3 dm: core: Allow parents to pass data to children during probe
Buses sometimes want to pass data to their children when they are probed.
For example, a SPI bus may want to tell the slave device about the chip
select it is connected to.

Add a new function to permit the parent data to be supplied to the child.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:46 -06:00
Simon Glass
a8981d4f80 dm: core: Add functions for iterating through device children
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:45 -06:00
Simon Glass
73e256c2ac dm: exynos: Move serial to driver model
Change the Exynos serial driver to work with driver model and switch over
all relevant boards to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:45 -06:00
Simon Glass
b8809e60cd dm: exynos: gpio: Convert to driver model
Convert the exynos GPIO driver to driver model. This implements the generic
GPIO interface but not the extra Exynos-specific functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:36 -06:00