Commit graph

104 commits

Author SHA1 Message Date
Simon Goldschmidt
e4478d9ac8 tests: dtoc: adapt tests to changed dtoc output
The dtoc tests need to be adapted to dtoc being changed to output platdata
structs as const, which has been introduced in commit 7d05d3a8e3 ("dtoc:
make generated platdata structs const").

Fixes: 7d05d3a8e3 ("dtoc: make generated platdata structs const")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2019-01-26 08:13:56 -05:00
Simon Goldschmidt
7d05d3a8e3 dtoc: make generated platdata structs const
The platdata initialization structs are currently generated into .rwdata.
Make sure the are put into .rodata by generating them as const.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:45 -05:00
Simon Glass
41b781ddf1 dtoc: Fix the value of SetInt()
This does not set the correct value at present. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Simon Glass
11ae93eef4 binman: Run tests concurrently
At present the tests run one after the other using a single CPU. This is
not very efficient. Bring in the concurrencytest module and run the tests
concurrently, using one process for each CPU by default. A -P option
allows this to be overridden, which is necessary for code-coverage to
function correctly.

This requires fixing a few tests which are currently not fully
independent.

At some point we might consider doing this across all pytests in U-Boot.
There is a pytest version that supports specifying the number of processes
to use, but it did not work for me.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08 07:34:34 -06:00
Simon Glass
4b4bc06ef4 buildman: dtoc: Suppress unwanted output from test
There are a few test cases which print output. Suppress this so that tests
can run silently in the normal case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08 07:34:34 -06:00
Simon Glass
e0e6275f4c binman: Fix up removal of temporary directories
At present 'make check' leaves some temporary directories around. Part of
this is because we call tools.PrepareOutputDir() twice in some cases,
without calling tools.FinaliseOutputDir() in between.

Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08 07:34:34 -06:00
Simon Glass
ed59e005e6 binman: Add a default path to libfdt.py
This module is often available in the sandbox_spl build created by
'make check'. Use this as a default path so that just typing 'binman -t'
(without setting PYTHONPATH) will generally run the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08 07:34:34 -06:00
Simon Glass
746aee3f2f dtoc: Add a way to create an Fdt object from a data block
Support creating an Fdt object without having to write the data to a file
first.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28 11:09:01 -06:00
Simon Glass
6434961b2b dtoc: Add methods for adding and updating properties
Add a few more functions which allow creating and modifying property
values. If only we could do this so easily in the real world.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28 11:09:01 -06:00
Simon Glass
e21c27af47 dtoc: Support adding new nodes
Add a way to add new nodes and sync them back to the blob.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28 11:09:01 -06:00
Simon Glass
af53f5aafc dtoc: Fixed endianness in Prop.GetEmpty()
This should be big endian, since that is what device tree uses. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28 11:09:01 -06:00
Simon Glass
fa80c25c09 dtoc: Allow syncing of the device tree back to a file
At present we require the caller to manually update the device tree using
individual calls to libfdt functions. This is not ideal. It would be
better if we could make changes using the Python structure and then call a
Sync() function to write them back.

Add this feature to the Fdt class. Update binman and the tests to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28 11:09:01 -06:00
Simon Glass
50c59522c2 libfdt: Update to latest pylibfdt implementation
The enhanced pylibfdt support in U-Boot needed for binman was a
placeholder while upstreaming of this work continued. This is now
complete, so bring in the changes and update the tools as needed.

There are quite a few changes since we decided to split the
implementation into three fdt classes instead of two.

The Fdt.del_node() method was unfortunately missed in this process and
will be dealt with later. It exists in U-Boot but not upstream.

Further syncing of libfdt probably needs to wait until we assess the
code-size impact of all the new checking code on SPL and possibly provide
a way to disable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-08 12:49:36 +01:00
Simon Glass
94a7c603b4 dtoc: Add a function to obtain a list of phandles
Add a function which can decode a property containing a list of phandles.
This is useful for finding nodes linked to a property. Also provide a way
to look up a single phandle and get the Fdt object from a Node.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 16:30:48 -06:00
Simon Glass
1d85888cdc dtoc: Export the _FindNode() function
This is useful for clients that want to find a node. Export it so it can
be used by others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 16:30:48 -06:00
Simon Glass
3af8e49cef binman: Add an entry filled with a repeating byte
It is sometimes useful to have an area of the image which is all zeroes,
or all 0xff. This can often be achieved by padding the size of an an
existing entry and setting the pad byte for an entry or image.

But it is useful to have an explicit means of adding blocks of repeating
data to the image. Add a 'fill' entry type to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 16:30:48 -06:00
Simon Glass
53af22a995 binman: Add support for passing arguments to entries
Sometimes it is useful to pass binman the value of an entry property from
the command line. For example some entries need access to files and it is
not always convenient to put these filenames in the image definition
(device tree).

Add a -a option which can be used like this:

   -a<prop>=<value>

where

   <prop> is the property to set
   <value> is the value to set it to

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 16:30:47 -06:00
Simon Glass
dc08ecc90c dtoc: Add missing comments to fdt_util
This module has a few missing comments. Add them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 16:30:47 -06:00
Simon Glass
116adecb5e dtoc: Add functions to add integer properties
Add a few simple functions to add a placeholder integer property, and
set its value.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
fe57c784ad dtoc: Avoid unwanted output during tests
At present some warnings are printed to indicate failures which are a
known part of running the tests. Suppress these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
8512ea2e35 dtoc: Increase code coverage to 100%
Add more tests to increase dtoc code coverage to 100%.

Correct a whitespace error in some test .dts files at the same time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
ba765217ed dtoc: Add a test for code coverage
Add a -T option to run a code-coverage test on dtoc. At present this is
about 96%. Future work will increase it to 100%.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
dfe5f5b97d dtoc: Fix some minor errors
Fix some comments and a printf string which is incorrect.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
760b7170c5 dtoc: Fix properties with a single zero-arg phandle
At present a property with a single phandle looks like an integer value
to dtoc. Correct this by adjusting it in the phandle-processing code.

Add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
b9066ffc13 dtoc: Fix Fdt.GetNode() to handle a missing node
At present the algortihm is not correct since it will return the root node
if the requested node is not found and there are no slashes in the
requested node name. Fix this and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
f9b88b3a5d dtoc: Keep track of property offsets
At present the Fdt class does not keep track of property offsets if they
change due to removal of properties. Update the code to handle this, and
add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
2a2d91d0d6 dtoc: Update fdt tests to increase code coverage
At present only some of the fdt functionality is tested. Add more tests to
cover the rest of it. Also turn on test coverage, which is now 100% with
a small exclusion for a Python 3 feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
960662404f dtoc: Drop use of a local dtb buffer
At present the Fdt class has its own copy of the device tree. This is
confusing an unnecessary now that pylibfdt has its own. Drop it and
provide access functions to the buffer.

This allows us to move the rest of the implementation to use pylibfdt
methods instead of directly calling libfdt stubs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
117f57b75a dtoc: Make use of the new pylibfdt methods
Now that pylibfdt supports a fuller API we don't need to directly call
the libfdt stubs. Update the code to use the Fdt methods instead.

Some other cases remain which will be tidied up in a later commit, since
they need larger changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
57f0bc428a dtoc: Update tests to write failures to /tmp
When a test fails due to an output mismatch (e.g. due to a new property
being adding to a test file) it is currently hard to update the test to
the new output. In particular the tabs in the file are written as \t in
the Python tests.

To make this easier, write both the expected and actual results to /tmp
to allow use of meld, and copying into the test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
2ba9875312 dtoc: Add some tests for the fdt module
At present this module is tested via the dtoc tests. This is a bit painful
since the tests are at a higher level and so failures are more difficult
to diagnose.

Add some tests that exercise the fdt module directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Simon Glass
3def0cf238 libfdt: Bring in proposed pylibfdt changes
This provides various patches sent to the devicetree-compiler mailing list
to enhance the Python bindings. A final version of this patch may be
created once upstreaming is complete, but if it takes too long, this can
act as a placeholder.

New pylibfdt features:
- Support for most remaining, relevant libfdt functions
- Support for sequential-write functions

Changes are applied to existing U-Boot tools as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Masahiro Yamada
94b13bbae9 host-tools: use python2 explicitly for shebang
All of these host tools are apparently written for Python2,
not Python3.

Use 'python2' in the shebang line according to PEP 394
(https://www.python.org/dev/peps/pep-0394/).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-28 12:27:30 -05:00
Simon Glass
3ed0de31b4 dtoc: Allow DTC environment variable to provide path to dtc
The system device-tree compiler may not be new enough to run the tests we
use in U-Boot (e.g. with binman). Allow use of a DTC environment variable
to point to the correct dtc. If not defined, the dtc on the default PATH
is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
aab660fe18 dtoc: Fix up tests
The tool has changed slightly since it was originally written. Update the
tests to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
d09682ef8c binman: Disable the no-unit_address_vs_reg warnings
These warnings are not useful for binman tests. Disable them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-22 18:05:38 -07:00
Simon Glass
d503114c66 dtoc: Add a header to the generated files
Add a header that indicates that the files generated by dtoc should not be
modified.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
634eba4be0 dtoc: Support properties containing multiple phandle values
At present dtoc has a very simplistic view of phandles. It assumes that
a property has only a single phandle with a single argument (i.e. two
cells per property).

This is not true in many cases. Enhance the implementation to scan all
phandles in a property and to use the correct number of arguments (which
can be 0, 1, 2 or more) when generating the C code. For the struct
definitions, use a struct which can hold the maximum number of arguments
used by the property.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
bc79617fdf dtoc: Put phandle args in an array
We want to support more than one phandle argument. It makes sense to use
an array for this rather than discrete struct members. Adjust the code to
support this. Rename the member to 'arg' instead of 'id'.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:48 -06:00
Simon Glass
35d503700f dtoc: Put each phandle on a separate line
When writing values from properties which contain phandles, dtoc currently
writes 8 phandles per line. Change this to write one phandle per line.
This helps reduce line length, since phandles are generally longer and may
have arguments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
0d15463c05 dtoc: Rename the phandle struct
Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g. struct phandle_1_arg). This is a more intuitive
naming.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
8fed2eb20c dtoc: Rename is_phandle() and adjust it to return more detail
Update this function to return more detail about a property that contains
phandles. This will allow (in a future commit) more accurate handling of
these properties.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
2925c26bb2 dtoc: Make is_phandle() a member function
This function will need to have access to class members once we enhance it
to support multiple phandle values. In preparation for that, move it into
the class.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
72ab7c5e38 dtoc: Use the Fdt's class's phandle map
Now that the Fdt class can map phandles to the associated nodes, use that
instead of a separate implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
09264e0433 dtoc: Update the Fdt class to record phandles
Add a map from phandles to nodes. This can be used by clients of the the
class instead of maintaining this themselves.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
5ec741fd84 dtoc: Handle 'reg' properties with unusual sizes
At present dtoc assumes that all 'reg' properties have both an address and
a size. For I2C devices we do not have this. Adjust dtoc to cope.

Reported-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Simon Glass
c20ee0ed07 dtoc: Add support for 32 or 64-bit addresses
When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.

Update the tool to use fdt64_t as the element type for reg properties when
either the address or size is larger than one cell. Use the correct value
so that C code can obtain the information from the device tree easily.

Alos create a new type, fdt_val_t, which is defined to either fdt32_t or
fdt64_t depending on the word size of the machine. This type corresponds
to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types
since they are defined to phys_addr_t and phys_size_t which use
'unsigned long' in the 32-bit case, rather than 'unsigned int'.

Add tests for the four combinations of address and size values (32/32,
64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368
which now need to use the new fdt_val_t type.

Signed-off-by: Simon Glass <sjg@chromium.org>

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:38 -06:00
Simon Glass
21d54ac353 dtoc: Avoid very long lines in output
Large arrays can result in lines with hundreds or thousands of characters
which is not very editor-friendly. To avoid this, addjust the tool to
group values 8 per line.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:24:39 -06:00