Commit graph

11 commits

Author SHA1 Message Date
Patrice Chotard
c0cdd5adc8 board: stm32: add stm32f469-discovery board support
This board offers :

 _ STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory
   and 324 Kbytes of RAM in BGA216 package
 _ On-board ST-LINK/V2-1 SWD debugger, supporting USB reenumeration capability:
     _ Mbed-enabled (mbed.org)
     _ USB functions: USB virtual COM port, mass storage, debug port
 _ 4 inches 800x480 pixel TFT color LCD with MIPI DSI interface and capacitive
   touch screen
 _ SAI Audio DAC, with a stereo headphone output jack
 _ 3 MEMS microphones
 _ MicroSD card connector
 _ I2C extension connector
 _ 4Mx32bit SDRAM
 _ 128-Mbit Quad-SPI NOR Flash
 _ Reset and wake-up buttons
 _ 4 color user LEDs
 _ USB OTG FS with Micro-AB connector
 _ Three power supply options:
 _ Expansion connectors and Arduino™ UNO V3 connectors

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:47 -05:00
Patrice Chotard
4a56fd484a board: stm32f429-disco: switch to DM STM32 clock driver
Use available DM clk_stm32f.c driver instead of dedicated
mach-stm32/stm32f4/clock.c.

Migrate periph_clock defines from stm32_periph.h directly in
CLK driver. These periph_clock defines will be removed when STMMAC,
TIMER2 and SYSCFG drivers will support DM CLK.

Enable also CLK flag.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
dcb11959d8 mach-stm32: stmf32f4: timer: remove clock_get() call
In order to use common clock driver between STM32F4 and
STM32F7, remove clock_get() call
As APB_PSC is always set to 2, only case when
clock_get(CLOCK_AHB) != clock_get(CLOCK_APB1) is kept

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
c729fb258a mach-stm32: Factorize MPU's region config for STM32 SoCs
MPU's region setup can be factorized between STM32F4/F7/H7 SoCs family
and used a common MPU's region config.

Only one exception for STM32H7 which doesn't have device area
located at 0xA000 0000.

For STM32F4, configure_clocks() need to be moved from arch_cpu_init()
to board_early_init_f().

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29 22:30:50 -05:00
Patrice Chotard
014a953c4a stm32: migrate clock structs in include/stm32_rcc.h
In order to factorize code between STM32F4 and STM32F7
migrate all structs related to RCC clocks in include/stm32_rcc.h

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29 22:30:50 -05:00
Patrice Chotard
679590ebc0 stmf32f4: soc: fix buildman compilation error
fix the following compilation error reported by buidlman:

       arm:  +   stm32f429-discovery
+arch/arm/mach-stm32/stm32f4/soc.c: In function 'arch_cpu_init':
+arch/arm/mach-stm32/stm32f4/soc.c:30:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
+  for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
+  ^
+arch/arm/mach-stm32/stm32f4/soc.c:30:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
+make[3]: *** [arch/arm/mach-stm32/stm32f4/soc.o] Error 1
+make[2]: *** [arch/arm/mach-stm32/stm32f4] Error 2
+make[1]: *** [arch/arm/mach-stm32] Error 2
+make: *** [sub-make] Error 2

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas Manocha <vikas.manocha@st.com>
2017-08-04 20:38:38 -04:00
Vikas Manocha
33b78476d2 stm32: use armv7m MPU configuration support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12 08:37:07 -04:00
Vikas Manocha
9ecb0c416c stm32: stm32f4: move flash driver to mtd driver location
Same flash driver can be used by other stm32 families like stm32f7.
Better place for this driver would be mtd driver location.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-03-26 18:49:28 -04:00
Vikas Manocha
14cec06113 gpio: stm32_gpio: move clock config from driver to board
This patch removes the gpio clock enable from gpio driver & move it in the
board code, making it possible to use the gpio driver with other socs.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:49 -05:00
Vikas Manocha
dffceb4b15 serial: serial_stm32: move clock config from driver to board
This patch removes the uart clock enable from serial driver & move it in the
board code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08 10:10:36 -05:00
Vikas Manocha
0a61ee880c stm32: move stm32 specific code to mach-stm32
This patch moves stm32 sources at one place, with this armv7m now contains
only generic stuff.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-01-20 10:19:41 -05:00