Commit graph

133 commits

Author SHA1 Message Date
Peter Tyser
eddf52b593 Replace "FLASH" strings with "Flash" or "flash"
There's no compelling reason to have the output on bootup or the
"flinfo" command print "flash" in uppercase, so use the proper case
where appropriate.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2011-01-19 00:02:37 +01:00
Mike Frysinger
4ffeab2cc0 cfi_flash: avoid flash_verbose when possible
The flash_verbose logic is only used by the CFI MTD layer, so if we aren't
using that, disable the logic completely.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-09 18:05:11 +01:00
Stefan Roese
6f726f9584 cfi_flash: Add optional config register write to cfi-detection
This patch adds the possibility to (optinally) write to the
flash configuration register. The Intel style CFI chips support
such a register that can be used to configure the operation
mode to a non-default value.

This method will be used by the t3corp board, which needs to
configure the DS617 Xilinx flash for async read mode.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:56:05 +01:00
Stefan Roese
4d2ca9d6a0 cfi_flash: Use flash_read32() in sector_erased()
The function sector_erased() is modified to not use pointer
access, but to use the correct accessor functions. This fixes a
problem on the t3corp board with the Xilinx DS617 flash chips. Here
a board specific accessor function is needed to read from flash
in 32bit mode. This patch enables such an operation mode.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:54:10 +01:00
Stefan Roese
df4e813b72 cfi_flash: Fix problems with status/id read mode
This patch adds some calls to set the flash chip in the read-status-
register- or read-id-mode before the corresponding register is
read back. This problem was detected while porting the common CFI
driver to support the Xilinx DS617 flash chips.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:54:03 +01:00
Anatolij Gustschin
34bbb8fb46 cfi_flash: fix bug introduced while recent change to flash_get_size()
commit ec50a8e389
"cfi_flash: handle 'chip size exceeds address window' situation"
added 3rd argument to flash_get_size() but didn't fix all the
function calls from the board specific code. Many boards have
their own flash_get_size() definitions in the board code and
use them there, but some boards (e.g. tqm834x, tqm85xx, pdm360ng)
use flash_get_size() from the cfi_flash.c driver.

The bug shows up if the value of the "max_size" argument (which
is not defined when calling the function with two arguments)
happens to be less than "info->size". In this case on the
affected boards we end up with a bank of reduced size and
in the worst case might even be not able to update U-Boot or
to boot the kernel from flash:

=> fli

Bank # 1: CFI conformant FLASH (32 x 16)  Size: 0 kB in 1 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 3 ms, buffer size: 64 bytes

  Sector Start Addresses:
  F0000000   RO

Bank # 2: CFI conformant FLASH (32 x 16)  Size: 128 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 3 ms, buffer size: 64 bytes

  Sector Start Addresses:
  F8000000        F8040000        F8080000        F80C0000        F8100000
  F8140000        F8180000        F81C0000        F8200000        F8240000
  ...

E.g., updating U-Boot is not possible now:

=> protect off ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format
=> era ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format

This patch removes the 3rd argument of flash_get_size() again
and sets "max_size" in the function itself instead of passing
it as a function argument.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-11-28 19:41:11 +01:00
Ilya Yanok
ec50a8e389 cfi_flash: handle 'chip size exceeds address window' situation
On some boards we have flash mapped high in the address space with
considerably small window (say 0xFE000000 and 32MB). When we install
bigger chip (say 64MB) on such a board strange things happen
(flash_write() doesn't work at all, for ex). That's because cfi_flash
driver doesn't care about window size at all.
Of course, cleanest solution would probably be to just extend address
window to be able to map the whole flash but for legacy/compatibility
reasons some people prefer just truncate the flash size and never use
the upper part.
This patch adds an option for cfi_flash driver to handle this situation
properly. To achieve this we add the new function cfi_flash_bank_size()
which can be provided by the board code and weak-aliased to default
implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES
array if it's defined or 0 otherwise (the last case is added for
compatibility).
If non-zero flash bank size is provided and detected chip size is bigger
than provided address window size the warning will be displayed and
flash chip will be truncated.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Changed cfi_flash_bank_size() return type to unsigned long
to match caller function.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-23 21:04:49 +02:00
John Schmoller
0e3fa01a63 cfi_flash: Fix "Unknown FLASH" error message
When a CFI flash chip could not be detected an error message similar to
the following would be printed on bootup:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 0 MB

The printf incorrectly converted the flash size into megabytes.  This
patch fixes the printing of the flash size in megabytes:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 16 MB

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-12 08:59:15 +02:00
Stefan Roese
ca5def3f30 cfi_flash: Simplify dynamic flash bank number detection
This patch simplifies the use of CONFIG_SYS_MAX_FLASH_BANKS_DETECT. By
moving these optional variables and defines into the common code, board
specific code is minimized. Currently only the following board use
this feature:

APC405, IDS8247, TQM834x

And IDS8247 doesn't seem to really need this feature, since its not
updating the bank number variable at all. So this patch removes the
definition of CONFIG_SYS_MAX_FLASH_BANKS_DETECT from this board port.

This new framework will be used by the upcoming lwmon5 update as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
2010-09-20 15:08:51 +02:00
Stefan Roese
b00e19cc6b cfi_flash: Add weak default for cfi_flash_bank_addr()
cfi_flash_bank_addr(int bank_nr) returns the base addresses of the
requested bank. Introducing this weak default enables boards to override
this functions with a board specific version when required.

This feature will be used in the lwmon5 board update, supporting runtime
detection of 2 board revisions with different flash layouts.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-20 15:08:43 +02:00
Stefan Roese
cba34aafde cfi_flash: Simplify flash_get_info()
This patch removes an unecessary check in the return statement. This is
not needed, since "info" is initializes to NULL. And "info" will not be
written to again, if the flash address is not found.

Additionally "info" is not initialized to "0" but to "NULL".

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-20 15:08:33 +02:00
Philippe De Muyter
54652991ca Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.
I have "ported" U-boot to a in house made board with Numonyx Axcell P33/P30
256-Mbit 65nm flash chips.

After some time :( searching for bugs in our board or soft, we have
discovered that those chips have a small but annoying bug, documented in
"Numonyx Axcell P33/P30 256-Mbit Specification Update"

It states :
When customer uses [...] block unlock, the block lock status might be
altered inadvertently. Lock status might be set to either 01h or 03h
unexpectedly (00h as expected data), which leads to program/erase failure
on certain blocks.

A working workaround is given, which I have applied and tested with success :

Workaround:  If the interval between 60h and its subsequent command
	     can be guaranteed within 20us, Option I is recommended,
	     otherwise Option II (involves hardware) should be selected.
Option I: The table below lists the detail command sequences:
Command
	      Data bus           Address bus       Remarks
Sequence
  1              90h            Block Address
						   Read Lock Status
  2             Read         Block Address + 02h
 (2)(3)                                      (1)
3                60h           Block Address
 (2)(3)                                      (1)   Lock/Unlock/RCR Configuration
4           D0h/01h/03h        Block Address
Notes:
(1) Block Address refers to RCR configuration data only when the 60h
    command sequence is used to set RCR register combined with 03h
    subsequent command.
(2) For the third and fourth command sequences, the Block Address must
    be the same.
(3) The interval between 60h command and its subsequent D0h/01h/2Fh/03h
    commands should be less than 20us.

And here is a log comparison of a simple (destructive) flash test without
and with the workaround.

 diff without-numonyx-workaround.log with-numonyx-workaround.log
 -U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:07:47)
 +U-Boot 2010.06-00696-g22b002c-dirty (Aug 16 2010 - 15:25:19)

  CPU:   Freescale MCF5484
         CPU CLK 200 MHz BUS CLK 100 MHz
  Board: Macq Electronique ME2060
  I2C:   ready
  DRAM:  64 MiB
  FLASH: 32 MiB
  In:    serial
  Out:   serial
  Err:   serial
  Net:   FEC0, FEC1
  -> flinfo

  Bank # 1: CFI conformant FLASH (16 x 16)  Size: 32 MB in 259 Sectors
    Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8922
    Erase timeout: 4096 ms, write timeout: 1 ms
    Buffer write timeout: 5 ms, buffer size: 1024 bytes

    Sector Start Addresses:
    FE000000 RO   FE008000 RO   FE010000 RO   FE018000 RO   FE020000 RO
    FE040000 RO   FE060000 RO   FE080000 RO   FE0A0000 RO   FE0C0000 RO
    ...
    FFF80000 RO   FFFA0000 RO   FFFC0000 RO   FFFE0000 RO
  -> protect off all
  Un-Protect Flash Bank # 1
  ................... done
  -> erase all
  Erase Flash Bank # 1
  ................... done
  -> cp.b 1000000 fe000000 2000000
 -Copy to Flash... Flash not Erased
 +Copy to Flash... done
  ->

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-08-18 09:09:00 +02:00
Stefan Roese
70084df712 cfi_flash: Cleanup flash_print_info()
This patch does the following:

- Extract code to detect if sector is erased into function
  sector_erased().
- Because of this, we don't have variable declarations inside the
  sector loop in flash_print_info()
- Change "return" to "break" in the "if (ctrlc()) statement:
  This fixes a problem with the resulting output. Before this
  patch the output was:

  Sector Start Addresses:
  FC000000        FC020000        FC040000   =>

  With this patch it is now:

  Sector Start Addresses:
  FC000000        FC020000        FC040000
  =>

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Wolfgang Denk <wd@denx.de>
2010-08-18 09:09:00 +02:00
Philippe De Muyter
d77c7ac47e Fix printing & reading of 16-bit CFI device identifiers
Fix reading and printing of CFI flashes 16-bit devices identifiers

Nowadays CFI flashes have a 16-bit device identifier.  U-boot still
print them and read them as if they were only 8-bit wide.  Fix that.
Before:
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1B
After:
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x881B

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-08-18 09:09:00 +02:00
Kim Phillips
2e97394a6d cfi_flash: flinfo: allow user interrupt in flash print info fn
flashes getting larger, users more impatient.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-08-18 09:09:00 +02:00
Wolfgang Denk
cdb749778a Rename getenv_r() into getenv_f()
While running from flash, i. e. before relocation, we have only a
limited C runtime environment without writable data segment. In this
phase, some configurations (for example with environment in EEPROM)
must not use the normal getenv(), but a special function.  This
function had been called getenv_r(), with the idea that the "_r"
suffix would mean the same as in the _r_eentrant versions of some of
the C library functions (for example getdate vs. getdate_r, getgrent
vs. getgrent_r, etc.).

Unfortunately this was a misleading name, as in U-Boot the "_r"
generally means "running from RAM", i. e. _after_ relocation.

To avoid confusion, rename into getenv_f() [as "running from flash"]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-08-04 00:45:36 +02:00
Thomas Chou
22d6c8faac cfi_flash: reset timer in flash status check
This patch adds reset_timer() before the flash status check
waiting loop.

Since the timer is basically running asynchronous to the cfi
code, it is possible to call get_timer(0), then only a few
_SYSCLK_ cycles later an interrupt is generated. This causes
timeout even though much less time has elapsed. So the timer
period registers should be reset before get_timer(0) is
called.

There is similar usage in nand_base.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-07 11:33:16 +02:00
Wolfgang Denk
0020db3f0d Merge remote branch 'origin/master' into next 2010-03-29 12:33:43 +02:00
Thomas Chou
e5720823f6 cfi flash: add status polling method for amd flash
This patch adds status polling method to offer an alternative to
data toggle method for amd flash chips.

This patch is needed for nios2 cfi flash interface, where the bus
controller performs 4 bytes read cycles for a single byte read
instruction. The data toggle method can not detect chip busy
status correctly. So we have to poll DQ7, which will be inverted
when the chip is busy.

This feature is enabled with the config def,
CONFIG_SYS_CFI_FLASH_STATUS_POLL

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-03-26 11:35:50 +01:00
Renato Andreola
c40c94a3d2 cfi_flash: precision and underflow problem in tout calculation
With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.

Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-03-25 09:44:58 +01:00
Wolfgang Wegner
8f9a221045 ] fix monitor protection for CONFIG_MONITOR_IS_IN_RAM
For platforms with flash below ram addresses, the current check to
activate monitor protection is wrong/insufficient. This patch fixes
CONFIG_MONITOR_IS_IN_RAM for these systems by adding a check for
this configuration.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-03-04 10:07:12 +01:00
Stefan Roese
fa36ae790e cfi: Add weak default function for flash_cmd_reset()
Currently the CFI driver issues both AMD and Intel reset commands.
This is because the driver doesn't know yet which chips are connected.
This dual reset seems to cause problems with the M29W128G chips as
reported by Richard Retanubun. This patch now introduces a weak default
function for the CFI reset command, still with both resets. This can
be overridden by a board specific version if necessary.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>
2009-10-28 11:34:14 +01:00
Niklaus Giger
3a7b2c21fb Support up to 7 banks for ids as specified in JEDEC JEP106Z
see http://www.jedec.org/download/search/jep106Z.pdf
Add some second source legacy flash chips 256x8.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-08-26 08:58:27 +02:00
John Schmoller
7dedefdf74 flash: Fix CFI buffer size bug
Fix bug introduced by 9c048b5234.

The cfi_flash.c driver cast the flash buffer size to a uchar in
flash_write_cfibuffer(). On some flash parts, (tested on Numonyx
part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to
uchar to enable buffer sizes to be larger.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-08-13 09:28:20 +02:00
Po-Yu Chuang
b4db4a7638 issue write command to base for JEDEC flash
For JEDEC flash, we should issue word programming command relative to
base address rather than sector base address. Original source makes
SST Flash fails to program sectors which are not on the 0x10000 boundaries.

e.g.
SST39LF040 uses addr1=0x5555 and addr2=0x2AAA, however, each sector
is 0x1000 bytes.

Thus, if we issue command to "sector base (0x41000) + offset(0x5555)",
it sends to 0x46555 and the chip fails to recognize that address.

This patch is tested with SST39LF040.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-13 11:01:31 +02:00
Wolfgang Denk
dfcd7f2160 Redundant Environment: protect full sector size
Several boards used different ways to specify the size of the
protected area when enabling flash write protection for the sectors
holding the environment variables: some used CONFIG_ENV_SIZE and
CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even
a mix of both for the "normal" and the "redundant" areas.

Normally, this makes no difference at all. However, things are
different when you have to deal with boards that can come with
different types of flash chips, which may have different sector
sizes.

Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the
biggest sector size, which may include several sectors on boards using
the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE
or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the
case that only the first of these sectors get protected, while the
following ones aren't.

This is no real problem, but it can be confusing for the user -
especially on boards that use CONFIG_ENV_SECT_SIZE to protect the
"normal" areas, while using CONFIG_ENV_SIZE_REDUND for the
"redundant" area.

To avoid such inconsistencies, I changed all sucn boards that I found
to consistently use CONFIG_ENV_SECT_SIZE for protection. This should
not cause any functional changes to the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Paul Ruhland
Cc: Pantelis Antoniou <panto@intracom.gr>
Cc: Stefan Roese <sr@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Dave Ellis <DGE@sixnetio.com>
Acked-by: Stefan Roese <sr@denx.de>
2009-06-04 00:16:16 +02:00
Ulf Samuelsson
cb82a53266 Add support for the AT91RM9200EK Board.
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Eric Schumann
3a3baf3ee6 Make flash protection work, when the environment is in EEPROM
On the pcm030 the environment is located in the onboard EEPROM. But we want
to handle flash sector protection in a safe manner. So we must read the
unlock environment variable from EEPROM instead from flash.

This patch is required as long the evironment is saved into the EEPROM.

Stefan: Additional change as suggested by Wolfgang, use bigger char array
(instead of 4).

Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-23 09:50:45 +01:00
Richard Retanubun
7a88601a34 CFI: geometry reversal for STMicro M29W320DT
Follow up to the flash_fixup_stm to fix geometry reversal
on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-19 15:00:32 +01:00
Heiko Schocher
4f975678de cfi: make flash_get_info() non static
If on your board is more than one flash, you must know
the size of every single flash, for example, for updating
the DTS before booting Linux. So make this function
flash_get_info() extern, and you can have all info
about your flashes.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-11 17:01:17 +01:00
Wolfgang Denk
f8306cb94f Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master 2009-02-07 23:51:52 +01:00
Stefan Roese
e1fb6d0d52 cfi_flash: Fix typo in cfi_flash.c
Patch "flash/cfi_flash: Use virtual sector start address, not phys"
introduced a small typo and compilation warning for systems with CFI
legacy support (e.g. hcu4). This patch fixes it.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:44:52 +01:00
Stefan Roese
ec21d5cfcb cfi_flash: Silence compilation warning
Patch "flash/cfi_flash: Use virtual sector start address, not phys"
introduced a small compilation warning. This patch fixes it.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:25:57 +01:00
Becky Bruce
09ce9921a7 flash/cfi_flash: Use virtual sector start address, not phys
include/flash.h was commented to say that the address in
flash_info->start was a physical address.  However, from u-boot's
point of view, and looking at most flash code, it makes more
sense for this to be a virtual address.  So I corrected the
comment to indicate that this was a virtual address.

The only flash driver that was actually treating the address
as physical was the mtd/cfi_flash driver.  However, this code
was using it inconsistently as it actually directly dereferenced
the "start" element, while it used map_physmem to get a
virtual address in other places.  I changed this driver so
that the code which initializes the info->start field calls
map_physmem to get a virtual address, eliminating the need for
further map_physmem calls.  The code is now consistent.

The *only* place a physical address should be used is when defining the
flash banks list that is used to initialize the flash_info struct,
usually found in the board config file.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:20:05 +01:00
Wolfgang Denk
657f2062d8 Fix compiler warning
(shows up only when DEBUG is enabled)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-04 12:09:20 +01:00
Richard Retanubun
e8eac43718 CFI: Add geometry reversal for STMicro M29W320ET
Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.

Modeled after flash_fixup_amd, this patch handles the geometry reversal
or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
Since I cannot test all STM's chips, the detection is implemented as
narrow as possible for now.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:59:48 +01:00
Jens Gehrlein
0f8e851e89 CFI: increase performance of function find_sector()
Tested on TQM5200S-BD with Samsung K8P2815UQB

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:50:13 +01:00
Jens Gehrlein
a7292871a7 CFI: avoid redundant function call in single word programming mode
The function find_sector() doesn't need to be called twice in
the case of AMD command set.
Tested on TQM5200S-BD with Samsung K8P2815UQB.

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:49:59 +01:00
Piotr Ziecik
91809ed51d cfi-mtd: Add cfi-mtd driver.
Add cfi-mtd driver, which exports CFI flash to MTD layer.
This allows CFI flash devices to be used from MTD layer.

Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
option. Initialization is done by calling cfi_mtd_init() from
flash_init().

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 11:05:25 +01:00
Piotr Ziecik
6ea808efdf cfi_flash: Add interface for flash verbosity control
Add interface for flash verbosity control. It allows
to disable output from low-level flash API. It is useful
when calling these low-level functions from context other
than flash commands (for example the MTD/CFI interface
implmentation).

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 10:55:36 +01:00
Piotr Ziecik
ebc9784ce6 cfi_flash: Export flash_sector_size() function.
Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
so that it can be used in the upcoming cfi-mtd driver.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 10:55:35 +01:00
Stefan Roese
45aa5a7f4d cfi_flash: Make all flash access functions weak
This patch defines all flash access functions as weak so that
they can be overridden by board specific versions.

This will be used by the upcoming VCTH board support where the NOR
FLASH unfortunately can't be accessed memory-mapped. Special
accessor functions are needed here.

To enable this weak functions you need to define
CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
Otherwise the "old" default functions will be used resulting
in smaller code.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-11-24 10:55:35 +01:00
Wolfgang Denk
9abda6ba73 CFI Driver: Fix "flash not ready" problem
This patch fixes a problem on systems where the NOR flash is attached
to a 64 bit bus.  The toggle bit detection in flash_toggle() is based
on the assumption that the same flash address is read twice without
any other interjacent flash accesses.  However, on 32 bit systems the
function flash_read64() [as currently implemented] does not perform
an atomic 64 bit read - instead, this is broken down into two 32 bit
read accesses on addresses "addr" and "addr + 4".  So instead of
reading a 64 bit value twice from "addr", we see a sequence of 4 32
bit reads from "addr", "addr + 4", "addr", and "addr + 4".  The
consequence is that flash_toggle() fails to work.

This patch implements a simple, but somewhat ugly solution, as it
avoids the use of flash_read64() in this critical place (by breaking
it down manually into 32 bit read operations) instead of rewriting
flash_read64() such to perform atomic 64 bit reads as one could
expect.  However, such a rewrite would require the use of floating
point load operations, which becomes pretty complex:

	save MSR;
	set Floating Point Enable bit in MSR;
	use "lfd" instruction to perform atomic 64 bit read;
	use "stfd" to store value to temporary variable on stack;
	load u64 value from temporary variable;
	restore saved MSR;
	return u64 value;

The benefit-cost ratio of such an implementation was considered too
bad to actually attempt this, especially as we can expect that such
an implementation would not only have a bigger memory footprint but
also cause a performance degradation.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-31 11:32:53 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Ed Swarthout
0d01f66d23 CFI: cfi_flash write fix for AMD legacy
The flash_unlock_seq requires a sector for AMD_LEGACY.
Fix a retcode check typeo.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-13 13:51:21 +02:00
Mike Frysinger
2215987e10 cfi_flash: do not reset flash when probe fails
The CFI flash driver starts at flash_init() which calls down into
flash_get_size().  This starts by calling flash_detect_cfi().  If said
function fails, flash_get_size() finishes by attempting to reset the
flash.  Unfortunately, it does this with an info->portwidth set to 0x10
which filters down into flash_make_cmd() and that happily smashes the
stack by sticking info->portwidth bytes into a cfiword_t variable that
lives on the stack.  On a 64bit system you probably won't notice, but
killing the last 8 bytes on a 32bit system usually leads to a corrupt
return address.  Which is what happens on a Blackfin system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-02 10:30:32 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Andrew Klossner
5251469943 Fix printf errors under -DDEBUG
Fix printf format-string/arg mismatches under -DDEBUG.

These warnings occur with DEBUG defined for a platform using
cpu/mpc85xx.  Users of other architectures can unearth similar
problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
after "CFLAGS += $(call cc-option,-fno-stack-protector)".

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-09-09 17:02:41 -05:00
Nick Spence
9e8e63cce6 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
This patch fixes a missing vendor code in the flash_real_protect() function.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-20 14:24:08 +02:00
TsiChung Liew
4e00acded2 CFI: Fix AMD Legacy sector protect
New implement sector lock and unlock or softlock commands
do not exist in AMD legacy flash. Thus, causing issue
when erasing AMD legacy flash (such as lv040)

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-20 14:21:46 +02:00
Stefan Roese
becbbc7b2a Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next 2008-08-14 08:25:13 +02:00
Jean-Christophe PLAGNIOL-VILLARD
00b1883a4c drivers/mtd: Move conditional compilation to Makefile
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:42 +02:00
Wolfgang Denk
2a112b234d CFI: allow for dynamically determined flash sizes and addresses
The CFI driver allowed only for static initializers in the
CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
several flash banks contiguously if the bank sizes were not known in
advance, which kind of violates U-Boot's design philosophy.

(will be used for example by the TQM8xxL boards)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-08 16:39:54 +02:00
Rafael Campos
bc9019e197 cfi-flash: Added support to flash_real_protect for Atmel flash devices
Some of the flash memories produced by ATMEL start in read-only mode.
We need to unprotect it. This patch allows the AT49BV6416 to work with
cfi_flash memories. Tested in the at91rm9200ek board.

Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:22:41 +02:00
Sebastian Siewior
340ccb260f cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
This got broken by commits 93c56f212c
 [cfi_flash: support of long cmd in U-boot.]

That command needs to be in little endian format on BE machines
with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
the cmdbuf in case portwidth = chipwidth = 8bit.

Cc: Alexey Korolev <akorolev@infradead.org>
Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
2008-07-17 11:42:35 +02:00
Sebastian Siewior
7288f972fc cfi_flash: make the command u32 only
This got changed by commit 93c56f212c
[cfi_flash: support of long cmd in U-boot.]

Long is the wrong type because it will behave differently on 64bit
machines in a way that is probably not expected. u32 should be
enough.

Cc: Alexey Korolev <akorolev@infradead.org>
Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
2008-07-15 21:42:04 +02:00
Stefan Roese
fb8c061ea0 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
This patch simplifies flash_toggle() (AMD commandset), which is used to
detect if a FLASH device is still busy with erase/program operations. On
800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
did not detect the busy state reliably, resulting in non erased sectors
etc. This patch now simplifies this function by "just" comparing the
complete data-word instead of ANDing it with the command-word (0x40)
before the compatison. It is done the same way in the Linux implementation
chip_ready() in cfi_cmdset_0002.c.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-19 15:08:17 +02:00
Wolfgang Denk
1859e42fbf Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash 2008-06-11 22:24:46 +02:00
Vasiliy Leoenenko
9c048b5234 cfi_flash: enable M18 flash chips family support.
Added new command set ID. Buffered write command processing is changed
in order to support M18 flash chips family.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
2008-06-03 21:02:34 +02:00
Vasiliy Leoenenko
93c56f212c cfi_flash: support of long cmd in U-boot.
Some NOR flash chips needs support of commands with length grether than max
value size of uchar. For example all M18 family chips use 0x1ff command in
buffered write mode as value of program loops count.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
2008-06-03 21:01:55 +02:00
Kumar Gala
f979690ee3 Fix warnings from gcc-4.3.0 build on a ppc host
* The cfi_flash.c memset fix actual allows the board to boot so there is
  a bit more going on here than just resolving warnings associated with
  uninitialized variables.

* include/asm/bitops.h:302: warning: '__swab32p' is static but used in
  inline function 'ext2_find_next_zero_bit' which is not static

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-03 19:52:52 +02:00
Matthias Fuchs
c63ad6325a cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
This patch adds a configurable flash auto protection list that can be used
to make U-Boot protect flash regions in flash_init().

The idea has been discussed on the u-boot mailing list starting
on Nov 18th, 2007.

Even this patch brings a new feature it is used as a bugfix for 4xx
platforms where flash_init() does not completely protect the
monitor's flash range in all situations.

U-Boot protects the flash range from CFG_MONITOR_BASE to
(CFG_MONITOR_BASE + monitor_flash_len  - 1) by default. This does not
include the reset vector at 0xfffffffc.

Example:
#define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}

This config option will auto protect the last 512k of flash that
contains the bootloader on board like APC405 and PMC405.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-04-25 15:52:14 +02:00
Guennadi Liakhovetski
96ef831f71 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
series require different addresses for buffered write commands. Define a
configuration option to support buffered writes on those chips. A more
elegant solution would be to automatically detect those chips by parsing
their CFI records, but that would require introduction of a fixup table
into the cfi_flash driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-12 08:59:09 +02:00
Daniel Hellstrom
97bf85d784 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
SPARC CPUs implement flash_read64 which calls __raw_readq.

For current SPARC architectures (LEON2 and LEON3) each read from the
FLASH must lead to a cache miss. This is because FLASH can not be set
non-cacheable since program code resides there, and alternatively disabling
cache is poor from performance view, or doing a cache flush between each
read is even poorer.

Forcing a cache miss on a SPARC is done by a special instruction "lda" -
load alternative space, the alternative space number (ASI) is processor
implementation spcific and can be found by including <asm/processor.h>.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-03-29 06:51:04 +01:00
Tor Krill
90447ecbba MTD/CFI: Add support for 16bit legacy AMD flash
Add entry for 512Kx16 AMD flash to jedec_table.
Read out 16bit device id if chipwidth is 16bit.
Fixed coding style after Stefans feedback

Signed-off-by: Tor Krill <tor@excito.com>
2008-03-28 11:44:23 +01:00
Stefan Roese
f0105727d1 CFI: Small cleanup for FLASH_SHOW_PROGRESS
With this patch we don't need that many #ifdef's in the code. It moves
the subtraction into the macro and defines a NOP-macro when
CONFIG_FLASH_SHOW_PROGRESS is not defined.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Jerry Van Baren
9a042e9ca5 Flash programming progress countdown.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Michael Schwingen
1ba639da56 CFI: Do not use uninitialized cmd_reset
Do not use uninitialized cmd_reset; issue both AMD and Intel reset
commands instead

From a short test, it looks like AMD-style flash roms treat *any* unknown
command write as a reset, at least when in CFI Query mode, so issuing the
Intel reset command to AMD-style flashs seems safe (from the small sample I
have), plus the 3-cycle magic sequence should kick the state machine into
the right state even without a reset command. Since the AMD-style flashs
require the unlock sequence for real operation, I chose to try the AMD reset
command first, so that Intel flashs do no see an invalid command prior to
the CFI query.

I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
plus Intel StrataFlash.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-02-21 17:12:19 +01:00
Michael Schwingen
8225d1e3ac CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Acked-by: Stefan Roese <sr@denx.de>
2008-01-13 15:07:26 +01:00
Stefan Roese
47cc23cbe9 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
flash chips connected to a 32bit wide port.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-02 14:05:37 +01:00
Stefan Roese
0dc80e2759 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
The check for an sufficiently erased destination was missing in the
buffered write function of the cfi flash driver (when
CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
writing to such a region will fail with the currect error message.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27 07:50:54 +01:00
Haavard Skinnemoen
467bcee11f cfi_flash: Add manufacturer-specific fixups
Run fixups based on the JEDEC manufacturer ID independent of the
command set ID.

This changes current behaviour: Previously, geometry reversal for AMD
chips were done based on the command set ID, while they are now done
based on the JEDEC manufacturer and device ID.

Also add fixup for top-boot Atmel chips. A fixup is needed for
AT49BV6416(T) too, but since u-boot currently only reads the low byte
of the device ID, there's no way to tell it apart from AT49BV642D,
which should not have this fixup. Since AT49BV642D support is
necessary to get ATNGW100 board support into mainline, I've commented
out the fixup for now.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:38 +01:00
Haavard Skinnemoen
0ddf06ddf6 cfi_flash: Add cmdset-specific init functions
Move things like reading JEDEC IDs and fixing up geometry reversal
into separate functions. The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:31 +01:00
Haavard Skinnemoen
e23741f4a6 cfi_flash: Read whole QRY structure in one go
Read out the whole CFI Standard Query structure after successful cfi
identification. This allows subsequent code to access this information
directly without having to go through flash_read_uchar() and friends.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:25 +01:00
Haavard Skinnemoen
12d30aa797 cfi_flash: Use map_physmem() and unmap_physmem()
Use map_physmem() and unmap_physmem() to convert from physical to
virtual addresses. This gives the arch a chance to provide an uncached
mapping for flash accesses.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:22 +01:00
Haavard Skinnemoen
cdbaefb5f5 cfi_flash: Introduce read and write accessors
Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
them to access the flash memory. This makes it clearer when the flash
is actually being accessed; merely dereferencing a volatile pointer
looks just like any other kind of access.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:11 +01:00
Haavard Skinnemoen
be60a9021c cfi_flash: Reorder functions and eliminate extra prototypes
Reorder the functions in cfi_flash.c so that each function only uses
functions that have been defined before it. This allows the static
prototype declarations near the top to be eliminated and might allow
gcc to do a better job inlining functions.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:14:55 +01:00
Haavard Skinnemoen
3055793bcb cfi_flash: Make some needlessly global functions static
Make functions not declared in any header file static.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:12:46 +01:00
Haavard Skinnemoen
7e5b9b4715 cfi_flash: Break long lines
This patch tries to keep all lines in the cfi_flash driver below 80
columns. There are a few lines left which don't fit this requirement
because I couldn't find any trivial way to break them (i.e. it would
take some restructuring, which I intend to do in a later patch.)

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:11:45 +01:00
Bartlomiej Sieka
42026c9cb3 CFI: synchronize command offsets with Linux CFI driver
Fixes non-working CFI Flash on the Inka4x0 board.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-12-13 12:00:37 +01:00
Michael Schwingen
81b20ccc2d CFI: support JEDEC flash roms in CFI-flash framework
The following patch adds support for non-CFI flash ROMS, by hooking into the
CFI flash code and using most of its code, as recently discussed here in the
thread "Mixing CFI and non-CFI flashs".

Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08 08:16:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
59829cc189 drivers/mtd : move mtd drivers to drivers/mtd
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:52 +01:00
Renamed from drivers/cfi_flash.c (Browse further)