Commit graph

110 commits

Author SHA1 Message Date
Liu Hui-R64343
877eb0f915 MX51EVK: UART does not print out the early information
The early bootup information is not print out due to
the UART pin iomux not set up correctly before board_init

Add the board_early_init_f function and enable the
CONFIG_BOARD_EARLY_INIT_F. Move the UART pin setting
from board_init to board_early_init_f function.

This patch also move the FEC pin iomux setup to the
board_early_init_f.

Signed-off-by: Jason Liu <r64343@freescale.com>
2011-02-02 00:54:41 +01:00
Jason Liu
a676cca41d mx51evk: savenv or env save command does not work
fix saveenv or env save command not work on mx51evk board.
with this patch, we can use savenv or env save to
store enviroments to mmc card slot 0

Signed-off-by: Jason Liu <r64343@freescale.com>
2010-11-21 18:24:10 +01:00
Shawn Guo
1ab027cbf6 mx51evk: support new relocation scheme
This patch is to fix build breakage and support new relocation
scheme for mx51evk.

- Correct IRAM base address and add size definition

  The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than
  0x1FFE8000 which is for older revision.

- Include imx-regs.h in mx51evk.h

  Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be
  referred to.

- Define CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE

  They are used to define init RAM layout.

- Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been
  buried by Wolfgang's commit below

  25ddd1fb: Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
2010-10-28 11:43:23 +02:00
Shawn Guo
06982534b6 mx51evk: consolidate env for mmcboot and netboot
This patch is to consolidate default mx51evk env for two primary
boot modes, mmcboot and netboot.

It also cleans some unused env like netdev, uboot and redundant
env like loadaddr since CONFIG_LOADADDR already defines it.

Signed-off-by: Shawn Guo <shawn.gsc@gmail.com>
2010-10-28 11:42:45 +02:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Jason Liu
ff9f475d5d MX5: rename mx51 to mx5
Rename mx51 to mx5 in order to support more mx51
like-style SOCs such as MX53 and the followings.

Signed-off-by: Jason Liu <r64343@freescale.com>
2010-10-18 10:43:19 +02:00
Stefano Babic
9f481e95ba MXC: Correct SPI_CPOL setting in SPI driver
The handling of the SPI_CPOL bit inside the SPI
driver was wrong. As reported by the manual,
the meaning of the SSPOL inside the
configuration register is the same as reported
by SPI specification (0 if low in idle, 1 is high
on idle). The driver inverts this logic.

Because this patch sets the logic as specified, it is required
to clear the CPOL bit in the configuration file to adapt
to the correct logic.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: David Jander <david.jander@protonic.nl>
2010-09-30 14:42:13 +02:00
Stefano Babic
b4377e12e9 Add SPI support to mx51evk board
The patch adds SPI devices to the mx51evk board.
The MC13892 chip (PMIC) is supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05 09:48:41 +02:00
Stefano Babic
5e1fe88fe3 Moved board specific values in config file
The lowlevel_init file contained some hard-coded values
to setup the RAM. These board related values are moved into
the board configuration file.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30 05:23:24 -05:00
Stefano Babic
c5fb70c911 Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fred Fan <fanyefeng@gmail.com>
2010-03-07 12:36:36 -06:00