Commit graph

13399 commits

Author SHA1 Message Date
Wolfgang Denk
3cfe695489 Revert "post, memory test: add memory_post_test() to include file"
This reverts commit f18714dd61
which cuases compile errors on a number of boards.

Signed-off-by:  Wolfgang Denk <wd@denx.de>
2011-07-26 13:53:35 +02:00
Jens Scharsig
39c6e039a0 Fix: if using crc32 command watchdog timed out
* Fix: if using crc32 command watchdog timed out
* change function call crc32(..) to the watchdog-safe variant
  crc_32_wd(..) to support watchdog reset

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
2011-07-26 00:40:50 +02:00
Matthias Weisser
b038db852b memcpy/memmove: Do not copy to same address
In some cases (e.g. bootm with a elf payload which is already at the right
position) there is a in place copy of data to the same address. Catching this
saves some ms while booting.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-26 00:28:44 +02:00
Rob Herring
942e31437d scsi/ahci: add support for non-PCI controllers
Add support for AHCI controllers that are not PCI based.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Wolfgang Denk <wd@denx.de>
2011-07-26 00:06:58 +02:00
Rob Herring
e5a6c79d42 scsi/ahci: ata id little endian fix
The ata id string always needs swapping, not just on BE machines.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-07-26 00:06:08 +02:00
Heiko Schocher
f18714dd61 post, memory test: add memory_post_test() to include file
This include is needed, if this memory test is used "outside"
from post code, for example booting with nand_spl, and using
this memory test before copying u-boot code to RAM and jumping
to it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2011-07-25 23:43:35 +02:00
Macpaul Lin
fafc245401 andes_spi: add andes_spi interface
andes_spi is an spi interface developed by Andes Tech.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-25 23:40:11 +02:00
Jason Hobbs
370d1e3e58 cosmetic, main: correct indentation/spacing issues
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-07-25 23:28:05 +02:00
Jason Hobbs
3c766dccb3 cosmetic, main: clean up declarations of abortboot
Remove an unneeded prototype declaration from the top of main.c,
and use plain inline instead of __inline__ to please checkpatch.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-07-25 23:27:43 +02:00
Mike Frysinger
f0ece9e934 net: designware: fix uninitialized phy_addr usage
When CONFIG_DW_SEARCH_PHY is disabled, the local phy_addr variable
never gets initialized which causes random behavior at runtime and a
gcc warning.  So set it by default to the stored phy address.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>

Fix commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-07-25 22:20:10 +02:00
Mike Frysinger
ee7f5bfd12 net: designware: fix unused warning when CONFIG_DW_AUTONEG is enabled
The ctrl variable is only used when autoneg support is disabled, so only
declare it under those conditions to avoid an unused variable warning.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>
2011-07-25 22:19:40 +02:00
Mike Frysinger
67d668bf92 autostart: unify duplicated logic into the bootm code
Rather than having a bunch of random commands handle autostart behavior,
unify the logic in a single place.  This also fixes building of these

different commands when bootm is disabled.

Acked-by: Matthew McClintock <msm@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-25 22:18:26 +02:00
Becky Bruce
51f924e5ce board/tqm85xx: Create and tear down TLB for get_ram_size()
We need a TLB entry to call get_ram_size(); the common code doesn't create
one until *after* fixed_sdram() has determined the size.  So we set up tlbs
for the max possible size and tear them down once we're done with
get_ram_size(); the common 85xx code will then set up a final set of tlb
entries for the *actual* detected size of ddr.

This prevents us from having TLB entries that are larger than DDR sitting
around for very long, which is not a recommended scenario.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22 03:07:47 -05:00
Becky Bruce
9cdfe28106 powerpc/mpc85xx: Add clear_ddr_tlbs function
This is useful when we just want to wipe out the TLBs.  There's currently
a function that resets the ddr tlbs to a different value; it is changed to
utilize this function.  The new function can be used in conjunction with
setup_ddr_tlbs() for a board to temporarily map/unmap the DDR address
range as needed.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22 03:07:47 -05:00
Timur Tabi
ffadc441bc fman: insert the Fman firmware into the device tree
The Fman device tree node binding allows for the entire Fman firmware binary
data to be embedded in the device tree.  This eliminates the need to have
NOR flash mapped to Linux just so that the Fman driver can see the firmware.

The location of the Fman firmware is taken from the 'fman_ucode' environment
variable.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22 03:07:43 -05:00
Timur Tabi
e4e7e42803 powerpc/85xx: add support the ePAPR "phandle" property
The ePAPR specification says that phandle properties should be called
"phandle", and not "linux,phandle".  To facilitate the migration from
"linux,phandle" to "phandle", we update fdt_qportal() to use the new
function, fdt_create_phandle().  This function abstracts the creation of
phandle properties.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22 01:49:39 -05:00
Wolfgang Denk
74fac70084 Merge branch 'master' of git://git.denx.de/u-boot-mmc
* 'master' of git://git.denx.de/u-boot-mmc:
  mmc: rescan fails on empty slot
  AT91:mmc:fix multiple read/write error
  mmc: Access mode validation for eMMC cards > 2 GiB
  mmc: sh_mmcif: add support for Renesas MMCIF
  mmc: fix the condition for MMC version 4
  MMC: add marvell sdhci driver
  MMC: add sdhci generic framework
  MMC: add erase function to both mmc and sd
  MMC: unify mmc read and write operation
  mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony
  mmc: Tegra2: SD/MMC driver for Seaboard - eMMC on SDMMC4, SDIO on SDMMC3
2011-07-19 22:27:07 +02:00
Matthew McClintock
1bb5e9071f Fix typo from 'mb_alloc' -> 'lmb_alloc'
Signed-off-by: Matthew McClintock <msm@freescale.com>
2011-07-19 10:38:33 +02:00
Wolfgang Denk
cdf1a2328a Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM: MX5: Fix broken leftover TO-2 errata workaround
  MX31: Cleanup clock function
  scb9328: Add ARM relocation support
  am3517evm: change console device from ttyS2 to ttyO2
  Remove volatile qualifier in get_ram_size() calls
  TI: TNETV107X Fix Build Error
  ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7
  arm: add CONFIG_MACH_TYPE setting and documentation
  arm: add __ilog2 function
  Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
  EfikaMX: Enable EXT2 booting
  EfikaMX: Add missing CONFIG_SYS_TEXT_BASE
  EfikaMX: Use correct imximage.cfg
  MX27: Update to autogenerated asm-offsets.h
  MX5: Update to autogenerated asm-offsets.h
  imx: Add support for zmx25 board
  imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
  imx: Add auto generation of asm-offsets.h for imx25
  imx: Add support for USB EHCI on imx25
  imx: Use correct imx25 reset.c
  imx: Add get_tbclk() function for imx25
  ARM: Update maintainer of board scb9328
  mx27: Make the UART port number explicit
  build: Add targets for auto gen of asm-offsets.h and use it in imx35
  mx31pdk: cosmetic: Fix line over 80 characters
2011-07-18 21:04:56 +02:00
Wolfgang Denk
1c6d00c2b5 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/p2041rdb: Add p2041rdb board support
  powerpc/85xx: Fix detection of P1017E
  powerpc/mpc8548cds: Remove incorrect DDR_MSYNC_IN erratum define
2011-07-18 21:03:08 +02:00
David Jander
6e25b6ce5d ARM: MX5: Fix broken leftover TO-2 errata workaround
This check was broken. r3 does not contain the silicon revision anymore, so
we need to reload it. Also, this errata only applies to i.MX51.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-07-18 14:41:48 +02:00
Stefano Babic
9f008bb47d MX31: Cleanup clock function
The patch provide the same API used with other i.MX
processors and get rid of mx31_ functions.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-07-18 14:41:48 +02:00
Torsten Koschorrek
386393c680 scb9328: Add ARM relocation support
This patch fixes compiler errors due to missing definitions of
CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR.

It also does some cleanup: CONFIG_SYS_TEXT_BASE was moved to scb9328.h,
obsolete config.mk was removed. The scb9328 board has 1 DRAM bank, so don't
ask for more banks. CONFIG_NR_DRAM_BANKS will ever be 1.

Signed-off-by: Torsten Koschorrek <koschorrek@synertronixx.de>
2011-07-18 14:41:48 +02:00
Yegor Yefremov
49473adabf am3517evm: change console device from ttyS2 to ttyO2
the serial device names have been changed from ttySx to ttyOx, so the
console device name should be also changed to support the latest kernel
versions.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Vaibhav Hiremath<hvaibhav@ti.com>
2011-07-18 12:35:52 +02:00
Mingkai Hu
4f1d1b7d1e powerpc/p2041rdb: Add p2041rdb board support
P2041RDB Specification:
-----------------------
Memory subsystem:
 * 4Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
 * 128 Mbyte NOR flash single-chip memory
 * 256 Kbit M24256 I2C EEPROM
 * 16 Mbyte SPI memory
 * SD connector to interface with the SD memory card

Ethernet:
 * dTSEC1: connected to the Vitesse SGMII PHY (VSC8221)
 * dTSEC2: connected to the Vitesse SGMII PHY (VSC8221)
 * dTSEC3: connected to the Vitesse SGMII PHY (VSC8221)
 * dTSEC4: connected to the Vitesse RGMII PHY (VSC8641)
 * dTSEC5: connected to the Vitesse RGMII PHY (VSC8641)

PCIe:
 * Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1
 * Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2

SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors

USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces

I2C:
 * I2C1: Real time clock, Temperature sensor, Memory module
 * I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM, PCIe slot1/2

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-17 11:03:36 -05:00
Kumar Gala
c518fc0281 powerpc/85xx: Fix detection of P1017E
Had a typo such that P1017E would not be detected correctly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-17 10:33:05 -05:00
Albert ARIBAUD
a55d23ccf6 Remove volatile qualifier in get_ram_size() calls
Checkpatch.pl complains about the volatile qualifier in calls to
get_ram_size(). Remove this qualifier in the prototype and in the
calls where it is useless, and leave it only in the function body
where it is needed.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-07-17 17:11:53 +02:00
Chan-Taek Park
930f335592 TI: TNETV107X Fix Build Error
This patch provides SDRAM base address and initial stack address to fix
build errors.

Signed-off-by: Chan-Taek Park <c-park@ti.com>
2011-07-17 17:01:32 +02:00
Rob Herring
22193540c1 ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7
cpu_init_crit can be skipped, but the code is still enabled requiring a
platform to supply lowlevel_init.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Albert ARIBAUD <albert.aribaud@free.fr>
2011-07-17 11:24:35 +02:00
Igor Grinberg
7eb29398c0 arm: add CONFIG_MACH_TYPE setting and documentation
CONFIG_MACH_TYPE is used to set the machine type number in the
common arm code instead of setting it in the board code.
Boards with dynamically discoverable machine types can still set the
machine type number in the board code.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-07-17 11:07:01 +02:00
David A. Long
a28afca57d Add uboot "fdt_high" enviroment variable
Add a new "fdt_high" enviroment variable. This can be used to control (or prevent) the
relocation of the flattened device tree on boot. It can be used to prevent relocation
of the fdt into highmem.  The variable behaves similarly to the existing "initrd_high"
variable.

Signed-off-by: David A. Long <dave.long@linaro.org>
2011-07-16 11:58:30 -04:00
Rob Herring
0b9bc73711 arm: add __ilog2 function
Add __ilog2 function for ARM. Needed for ahci.c

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Albert ARIBAUD <albert.aribaud@free.fr>
2011-07-16 13:00:11 +02:00
Graeme Russ
a60d1e5b8e Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-07-16 11:55:00 +02:00
Michael Jones
8fd01b8f6b mmc: rescan fails on empty slot
Fail in 'mmc rescan' if mmc_init() returns error

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:22 -05:00
elen.song
c310fc8404 AT91:mmc:fix multiple read/write error
According to datasheet,set block count before multiple read/write.

Signed-off-by: elen.song <elen.song@atmel.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:21 -05:00
Łukasz Majewski
b1f1e821d3 mmc: Access mode validation for eMMC cards > 2 GiB
This patch provides handling of the two way handshake when SEND_OP_COND
(CMD1) is send to mmc card. It is necessary to inform eMMC card if the
host can work with high capacity cards (Jedec JESD84-A441, point 7.4.3).

The extra flag MMC_MODE_HC (high capacity) is added to indicate if the
host is capable of handling the high capacity eMMC cards.

Since this change is added to the generic mmc framework, then it requires
other boards to indicate if their mmc controllers can handle high capacity
cards. As it is now - the old behaviour of the framework is preserved.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:21 -05:00
Yoshihiro Shimoda
afb35666da mmc: sh_mmcif: add support for Renesas MMCIF
Some Renesas SuperH have MMCIF module. This driver supports it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:21 -05:00
Yoshihiro Shimoda
639b7827d1 mmc: fix the condition for MMC version 4
Fix the problem that if we use the chip of MMC version 4 and
the capacity is smaller than 2GB or equal, the mmc->capacity is
invalid. According to the JEDEC Standard, the value of ext_csd's
capacity is valid if the value is more than 2GB.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:20 -05:00
Lei Wen
e75787d903 MMC: add marvell sdhci driver
This could support both armada100 and pantheon serial in the mainline,
while this driver also be tested to support upcoming mg, mmp2 and mmp3
hardware.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:19 -05:00
Lei Wen
af62a55785 MMC: add sdhci generic framework
Nowdays, there are plenty of mmc driver in uboot adopt the sd standard
host design, aka as sdhci. It is better to centralize the common logic
together to better maintenance.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:18 -05:00
Lei Wen
e6f99a5611 MMC: add erase function to both mmc and sd
Erase is a very basic function since the begin of sd specification is
announced. Although we could write a bulk of full 0xff memory to the
range to take place of erase, it is more convenient and safe to
implement the erase function itself.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-15 20:29:17 -05:00
Lei Wen
6be95ccf9f MMC: unify mmc read and write operation
mmc read and write command has so many in common, unfiy those two to
force consistency across the those two.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:00 -05:00
Tom Warren
83800959a8 mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:28:59 -05:00
Tom Warren
21ef6a109c mmc: Tegra2: SD/MMC driver for Seaboard - eMMC on SDMMC4, SDIO on SDMMC3
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:28:56 -05:00
Gerald Van Baren
a8d2a75d72 fdt: introduce fdt_create_phandle()
The ePAPR specification says that phandle properties should be called
"phandle", and not "linux,phandle".  To facilitate the migration from
"linux,phandle" to "phandle", introduce function fdt_create_phandle(),
which creates a phandle in a given node.  For now, we create both the
"phandle" and "linux,phandle" properties.  A later version of this
function will remove support for "linux,phandle".

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-07-14 21:43:45 -04:00
Timur Tabi
b3606f141e fdt: add prototype for fdt_increase_size()
Add a prototype for fdt_increase_size() so that anyone can call it.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-07-14 21:43:40 -04:00
Timur Tabi
bb682001f1 fdt: introduce fdt_verify_alias_address() and fdt_get_base_address()
Introduce two functions, fdt_verify_alias_address() and
fdt_get_base_address(), which can be used to verify the physical address
of a device in a device tree.

fdt_get_base_address() returns the base address of an SOC or PCI node.

fdt_verify_alias_address() prints a message if the address of a node
specified by an alias does not match the given physical address.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-07-14 21:43:36 -04:00
David Gibson
d1c6314887 libfdt: Implement property iteration functions
For ages, we've been talking about adding functions to libfdt to allow
iteration through properties.  So, finally, here are some.

I got bogged down on this for a long time because I didn't want to
expose offsets directly to properties to the callers.  But without
that, attempting to make reasonable iteration functions just became
horrible.  So eventually, I settled on an interface which does now
expose property offsets.  fdt_first_property_offset() and
fdt_next_property_offset() are used to step through the offsets of the
properties starting from a particularly node offset.  The details of
the property at each offset can then be retrieved with either
fdt_get_property_by_offset() or fdt_getprop_by_offset() which have
interfaces similar to fdt_get_property() and fdt_getprop()
respectively.

No explicit testcases are included, but we do use the new functions to
reimplement the existing fdt_get_property() function.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This was extracted from the DTC commit:
73dca9ae0b9abe6924ba640164ecce9f8df69c5a Mon Sep 17 00:00:00 2001

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2011-07-14 21:10:34 -04:00
David Gibson
05a22ba096 Support ePAPR compliant phandle properties
Currently, the Linux kernel, libfdt and dtc, when using flattened
device trees encode a node's phandle into a property named
"linux,phandle".  The ePAPR specification, however - aiming as it is
to not be a Linux specific spec - requires that phandles be encoded in
a property named simply "phandle".

This patch adds support for this newer approach to dtc and libfdt.
Specifically:

	- fdt_get_phandle() will now return the correct phandle if it
          is supplied in either of these properties

	- fdt_node_offset_by_phandle() will correctly find a node with
          the given phandle encoded in either property.

	- By default, when auto-generating phandles, dtc will encode
          it into both properties for maximum compatibility.  A new -H
          option allows either only old-style or only new-style
          properties to be generated.

	- If phandle properties are explicitly supplied in the dts
	  file, dtc will not auto-generate ones in the alternate format.

	- If both properties are supplied, dtc will check that they
          have the same value.

	- Some existing testcases are updated to use a mix of old and
          new-style phandles, partially testing the changes.

	- A new phandle_format test further tests the libfdt support,
          and the -H option.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

This was extracted from the DTC commit:
d75b33af676d0beac8398651a7f09037555a550b Mon Sep 17 00:00:00 2001

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2011-07-14 21:03:53 -04:00
Marek Vasut
4e0499ebb0 EfikaMX: Enable EXT2 booting
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-07-14 15:41:25 +02:00