This uses ARRAY_SIZE() but does not include the header file which declares
it. Fix this, so that command.h can be included without common.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Support booting ChromiumOS on ARM devices using FIT. Add an entry into the
boot implementation which does not require a command line. This can be
expanded over time as the bootm code is refactored.
Signed-off-by: Simon Glass <sjg@chromium.org>
On the arm64 architecture booti_setup() is called for EFI FIT images.
This function call fails because EFI images typically do not have a
kernel signature.
Check that the operating system property "os" of the image is "linux"
before invoking booti_setup().
Fixes: 487b5fa6de ("bootm: Handle kernel_noload on arm64")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Enable the support for boot image header version 3 and 4
using abootimg command.
In order to use version 3 or 4:
1- Vendor boot image address should be given to abootimg cmd.
abootimg addr $1 $vendor_boot_load_addr
2- "ramdisk_addr_r" env variable (ramdisk address) should be set to host
the ramdisk : generic ramdisk + vendor ramdisk
Replace "struct andr_boot_img_hdr_v0*" by "void *" in
some functions since v3 and v4 are now supported as well.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce vendor boot image for version 3 and 4 of boot image header.
The vendor boot image will hold extra information about kernel, dtb
and ramdisk.
This is done to prepare for boot image version 3 and 4 support.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
This converts 2 usages of this option to the non-SPL form, since there is
no SPL_CMD_FDT defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
This converts 2 usages of this option to the non-SPL form, since there is
no SPL_CMD_BOOTM_PRE_LOAD defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_CMD_BOOTI defined in Kconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
As there are no more non-DM_ETH cases for networking, remove this legacy
file and update the Makefile to match current usage.
Signed-off-by: Tom Rini <trini@konsulko.com>
At present when bootm fails, it says:
subcommand not supported
and then prints help for the bootm command. This is not very useful, since
generally the error is related to something else, such as fixups failing.
It is quite confusing to see this in a test run.
Change the error and show the error code.
We could update the OS functions to return -ENOSYS when they do not
support the bootm subcommand. But this involves some thought since this is
arch-specific code and proper errno error codes are not always returned.
Also, with the code as is, all required subcommands are of course
supported - a problem would only come if someone added a new one or
removed support for one from an existing OS. Therefore it seems better to
leave that sort of effort for when our bootm tests are improved.
Note: v1 of this patch generated a discussion[1] about printing error
strings automatically using printf(). That is outside the scope of this
patch but will be dealt with separately.
[1] https://patchwork.ozlabs.org/project/uboot/patch/20220909151801.336551-3-sjg@chromium.org/
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
FTD blob can be put immediately after the OS image.
So use strict inequality for start address check.
Fixes: fbde7589ce ("common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
fit_image_get_comp() should not set value -1 in case it can't read
the compression node. Instead, leave the value untouched in that case
as it can be absent and a default value previously defined by the
caller of fit_image_get_comp() should be used.
As a result the warning message
WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file!
no longer shows if the compression node is actually absent.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Change variable name 'imape_comp' to the supposedly intended name
'image_comp'.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This converts the following to Kconfig:
CONFIG_SYS_BOOTM_LEN
As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().
Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Linux determines its console based on several sources:
1. the console command line parameter
2. device tree (e.g. /chosen/stdout-path)
3. various other board- and arch-specific sources
If the console parameter specifies a real console (e.g. ttyS0) then that is
used as /dev/console. However, if it does not specify a real console (e.g.
ttyDoesntExist) then *nothing* will be used as /dev/console.
Reading/writing it will return ENODEV. Additionally, no other source will
be used as a console source.
Linux commit ab4af56ae250 ("printk/console: Allow to disable console output
by using console="" or console=null") recently changed the semantics of the
parameter. Previously, specifying console="" would be treated like
specifying some other bad console. This commit changed things so that it
added /dev/ttynull as a console (if available). However, it also allows
for other console sources. If the device tree specifies a console (such as
if U-Boot and Linux share a device tree), then it will be used in addition
to /dev/ttynull. This can result in a non-silent console.
To avoid this, explicitly set ttynull as the console. This will disable
other console sources. If CONFIG_NULL_TTY is disabled, then this will have
the same behavior as in the past (no output, and writing /dev/console
returns ENODEV).
[1] and [2] have additional background on this kernel change.
[1] https://lore.kernel.org/all/20201006025935.GA597@jagdpanzerIV.localdomain/
[2] https://lore.kernel.org/all/20201111135450.11214-1-pmladek@suse.com/
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Add a stage pre-load to the command bootm.
Right now, this stage may be used to read a
header and check the signature of the full
image.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.
Most files with 'boot' or 'image' in them are moved, except:
- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c which relates to U-Boot timing
Drop the removal of boot* files from the output directory, since this
interfers with the symlinks created by tools and there does not appear
to be any such file from my brief testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Artem Lapkin <email2tema@gmail.com>
Tested-by: Artem Lapkin <email2tema@gmail.com>
