Commit graph

85819 commits

Author SHA1 Message Date
Pali Rohár
8b88206696 mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot part
Mask macro PART_ACCESS_MASK filter out access bits of emmc register and
macro EXT_CSD_EXTRACT_BOOT_PART() extracts boot part bits of emmc register.
So use EXT_CSD_EXTRACT_BOOT_PART() when extracting boot partition.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-10 12:18:17 +09:00
Stefan Roese
8af21b094d mmc: mv_sdhci: Depend on DM_MMC
All build targets using this driver already use DM_MMC. So let's depend
this driver on this Kconfig symbol and remove the non-DM driver part.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10 12:17:58 +09:00
Stefan Roese
c06a568473 mmc: mv_sdhci: Remove CONFIG_MMC_SDHCI_IO_ACCESSORS support
CONFIG_MMC_SDHCI_IO_ACCESSORS is not supported and/or used by this
driver so let's remove these unused parts completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10 12:17:50 +09:00
Stefan Roese
46beaec835 mmc: mv_sdhci: Simplify call to sdhci_mvebu_mbus_config()
This driver already depends on CONFIG_ARCH_MVEBU, so there is no need
to have some checks for this Kconfig symbol in the driver itself. Let's
remove these superfluous checks.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10 12:17:43 +09:00
Loic Poulain
94f40b9450 test: dm: mmc: Check block erasing boundaries
Verify that erasing blocks does not impact adjacent ones.
- Write four blocks [0 1 2 3]
- Erase two blocks [ 1 2 ]
- Verify [0 1 2 3 ]

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2023-04-10 12:17:32 +09:00
Loic Poulain
67642c1254 mmc: erase: Use TRIM erase when available
The default erase command applies on erase group unit, and
simply round down to erase group size. When the start block
is not aligned to erase group size (e.g. erasing partition)
it causes unwanted erasing of the previous blocks, part of
the same erase group (e.g. owned by other logical partition,
or by the partition table itself).

To prevent this issue, a simple solution is to use TRIM as
argument of the Erase command, which is usually supported
with eMMC > 4.0, and allow to apply erase operation to write
blocks instead of erase group

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-10 12:17:24 +09:00
Loic Poulain
eeb739a6fd mmc: Check support for TRIM operations
When secure/insecure TRIM operations are supported.
When used as erase command argument it applies the
erase operation to write blocks instead of erase
groups.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10 12:17:11 +09:00
Tom Rini
7daa8dd59b Pull request for efi-2023-07-rc1
Documentation:
 
 * man-page for coninfo command
 * documentation style
 * switch settings for boot modes on AM62 SK
 
 UEFI:
 
 * avoid using deprecated HandleProtocol()
 * set static attribute for non-exported functions and variables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmQxz2YACgkQxIHbvCwF
 GsTxqw/+L3uDNDa9a5f9M2AX/HIoUtdkmhvLeIrE5NlJufV9razkPRN6uUvYpeeJ
 YJDkYxEkNZmNmliFagsVJEXjxgQGdEh/P0SLffkX89Bg5u1DhP1Rfx5vf7RcbM77
 m54+m4lRiYYi4woq/i7l3jqusSUTX4amDbO/3eIXVmSko61xiu1L4+0Mhe8lYWwo
 FTGkg2+eOtnZ/u+hmTT+6XXyXkAXCZOjcEc25SnEfA7rtlIyzaJOb2+XPXr8q2nc
 GMGg9QItTu0aDHarkunuflHpXQ/APs9AtY7Q8pj0Ko2IXvCu2OXFu+mRgquHrNKJ
 0koN69Ie2mqt7kzImInu5KtGRli5Vf1M820L5Y//BdvX+emGK3ccx4ywj9+yZQSr
 qo+ch7hup19sT/g8+wsG3cwYfn6qQyGz73rkSYB2D2ris2o5xoTgOsnyuFFHTQrv
 Zwj79/DTkgcPUvzCnUkH1sz2HKi/J3h44L5aTVM7bslrJL4AgXzlcssr4cM4ElwT
 aAUJKfX5AukrIhw2AA6f/FYrdEW5yt8oiNPfIs5x0bYNsWcooMBdE5ZYvqJPy2Mp
 2U/dDHYWNbKOFP6od3eyjCHTp4mC1BTiCcVQ9Zhp3T/E/Ehfu65vWHaf1LwcjRFL
 z44cZGny341WoMZzImgj+ciPWABzbMEWCfb7Indva3tlFVCFZ1U=
 =bYxY
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-07-rc1

Documentation:

* man-page for coninfo command
* documentation style
* switch settings for boot modes on AM62 SK

UEFI:

* avoid using deprecated HandleProtocol()
* set static attribute for non-exported functions and variables
2023-04-09 11:08:39 -04:00
Tom Rini
fa6f458c67 Merge branch 'master_regulator/fixes' of https://source.denx.de/u-boot/custodians/u-boot-sh
- Fix usage of CONFIG_IS_ENABLED and DM_REGULATOR
2023-04-08 14:19:08 -04:00
Tom Rini
187c7aba22 - fix building sandbox without SDL
- improve tegra DC driver to work with panel ops and implement
    native 180 degree panel rotation support
  - add T30 support to tegra DC driver
  - add DSI driver (based on mainline Linux one with minor
    adjustments, only T30 tested)
  - add get_display_timing ops to simple panel driver
  - extend simple panel driver to use it for MIPI DSI panels
    which do not require additional DSI commands for setup
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCZDBwUw4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXL3+AJ9EkQKAWXZtlYdAOVl4/nzJnuTCAQCfY58zkDsw
 TnAlwmMGWFl3RF6yGXY=
 =uYUp
 -----END PGP SIGNATURE-----

Merge tag 'video-20230407' of https://source.denx.de/u-boot/custodians/u-boot-video

 - fix building sandbox without SDL
 - improve tegra DC driver to work with panel ops and implement
   native 180 degree panel rotation support
 - add T30 support to tegra DC driver
 - add DSI driver (based on mainline Linux one with minor
   adjustments, only T30 tested)
 - add get_display_timing ops to simple panel driver
 - extend simple panel driver to use it for MIPI DSI panels
   which do not require additional DSI commands for setup
2023-04-08 11:20:47 -04:00
Heinrich Schuchardt
d9d07d751e cmd: consider multiplexing in coninfo
If console multiplexing in enabled (CONFIG_CONSOLE_MUX=y), the output of
the coninfo command should show the file association (stdin, stderr,
stdout) for all devices not only the default ones.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 07:50:43 +02:00
Bin Meng
6fc4fc38ac efi: loader: Make efi_runtime_mmio static
efi_runtime_mmio is only referenced in efi_boottime.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Bin Meng
207b686421 efi: loader: Make efi_mem static
efi_mem is only referenced in efi_memory.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Bin Meng
ee23830b6e efi: loader: Make efi_event_queue and efi_register_notify_events static
efi_event_queue and efi_register_notify_events are only referenced
in efi_boottime.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Bin Meng
8063c55e58 efi: selftest: Make load_file() and load_file2() static
load_file() and load_file2() are only referenced in
efi_selftest_load_file.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Bin Meng
013f9f89f8 efi: selftest: Make record static
record is only referenced in efi_selftest_exitbootservices.c

Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08 07:46:44 +02:00
Heinrich Schuchardt
199675b9d5 efi_loader: avoid using HandleProtocol in initrddump.efi
HandleProtocol() is deprecated and leaves an OpenedProtocolInformation
behind. Use OpenProtocol(GET_PROTOCOL) instead.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-08 07:45:34 +02:00
Heinrich Schuchardt
ff6ce8da97 efi_loader: avoid using HandleProtocol in helloworld.efi
HandleProtocol() is deprecated and leaves an OpenedProtocolInformation
behind. Use OpenProtocol(GET_PROTOCOL) instead.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-08 07:45:34 +02:00
Heinrich Schuchardt
5eed4a1ed7 doc: coninfo man-page
Provide a man-page for the coninfo command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-08 07:44:33 +02:00
Heinrich Schuchardt
dc3e41ec59 doc: mention usage of .readthedocs.yml
Mention that HTML pages are published at https://u-boot.readthedocs.io/
and that the file .readthedocs.yml controls the build process.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 07:44:33 +02:00
Judith Mendez
354c05f265 doc: ti: Add switch setting for boot modes on AM62 SK
List some common boot modes and their corresponding switch
settings for AM62 SK.

Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-08 07:44:33 +02:00
Heinrich Schuchardt
624faeecec doc: describe our documentation style
Provide a reference document for the U-Boot documentation style.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 07:44:33 +02:00
Marek Vasut
e3fed5ce79 video: tl070wsh30: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Marek Vasut
641c595581 video: simple-panel: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Marek Vasut
97485e3596 video: rm68200: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Marek Vasut
2d8253cc04 video: otm8009a: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Marek Vasut
6419dbabe2 mmc: npcm_sdhci: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Marek Vasut
7d39feb137 misc: ub251xb: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Tom Rini
965f74b5b3 Merge branch 'master_sh/gen4/initial' of https://source.denx.de/u-boot/custodians/u-boot-sh
- Initial R-Car Generation 4 support
2023-04-07 15:55:50 -04:00
Svyatoslav Ryhel
cc54a924cd simple_panel: support simple MIPI DSI panels
Re-use simple panel driver for MIPI DSI panels
which do not require additional DSI commands
for setup.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF700T T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:54:31 +02:00
Svyatoslav Ryhel
86cb1bdc45 simple_panel: add support for get_display_timing
Some cases may require passing display timings from
panel driver. To handle such cases support parsing
device tree panel node for timing subnode.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Google Nexus 7 2012
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:53:38 +02:00
Svyatoslav Ryhel
acbb871af5 video: tegra20: add DSI controller driver
Adds support for both DSI outputs found on Tegra. Only very
minimal functionality is implemented, so advanced features
like ganged mode won't work. Driver is heavily based on
mainline Tegra DSI and re-uses much of its features.

Only T30 is supported for now but T20 support can be added
if any supported devices will be found.

Driver is wrapped as panel driver since Tegra DC driver supports
only panel drivers calls.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:52:54 +02:00
Svyatoslav Ryhel
a8f4f9f815 video: tegra-dc: pass DC regmap to internal devices
Internal video devices like DSI and HDMI controllers
require sending commands into DC register field.
To make this available, lets create platform data,
which is restricted to pass DC regmap only to
pre-defined devices.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:47:52 +02:00
Svyatoslav Ryhel
b450c6c7e3 video: tegra-dc: add panel_set_backlight call
Tegra DC driver does not call panel_set_backlight, which can
result in absence of backlight on device. Fix this by calling
panel_set_backlight with BACKLIGHT_DEFAULT just after
panel_enable_backlight.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:47:01 +02:00
Svyatoslav Ryhel
8076cc51fb video: tegra-dc: add 180 degree panel rotation
Unlike 90 and 270 degree rotation, 180 degree rotation is more
common and does not require scaling. Implement it for correct
grouper support.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Google Nexus 7 2012
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Google Nexus 7 2012
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:46:24 +02:00
Svyatoslav Ryhel
098dbcb7ca video: tegra-dc: assign regmap directly
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:44:39 +02:00
Svyatoslav Ryhel
f67f23c5df video: tegra-dc: request timings from panel driver first
Check if panel driver has display timings and get those.
If panel driver does not pass timing, try to find timing
under rgb node for backwards compatibility.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 19:43:14 +02:00
Svyatoslav Ryhel
e114f507ec video: tegra-dc: get clocks from device tree
DISP1 clock may use PLLP, PLLC and PLLD as parents.
Instead of hardcoding, lets pass clock and its
parent from device tree. Default parent is PLLP.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 18:34:19 +02:00
Svyatoslav Ryhel
cf291babc7 video: move tegra dc driver into own folder
Move tegra dc driver to tegra20 directory and also mention
T30 in description of the driver's config option.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
[agust: add commit description]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2023-04-07 18:33:11 +02:00
Marcel Ziswiler
8dfeee651f tegra: lcd: video: integrate display driver for t30
On popular request make the display driver from T20 work on T30 as
well. Turned out to be quite straight forward. However a few notes
about some things encountered during porting: Of course the T30 device
tree was completely missing host1x as well as PWM support but it turns
out this can simply be copied from T20. The only trouble compiling the
Tegra video driver for T30 had to do with some hard-coded PWM pin
muxing for T20 which is quite ugly anyway. On T30 this gets handled by
a board specific complete pin muxing table. The older Chromium U-Boot
2011.06 which to my knowledge was the only prior attempt at enabling a
display driver for T30 for whatever reason got some clocking stuff
mixed up. Turns out at least for a single display controller T20 and
T30 can be clocked quite similar. Enjoy.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07 18:24:42 +02:00
Simon Glass
67a3646521 sandbox: video: Fix building without SDL
This is currently broken. If SDL is not installed, SANDBOX_SDL becomes
false and build errors are generated, e.g.:

   test/dm/video.c:424: undefined reference to `sandbox_sdl_set_bpp'

Fix it by making the function return an error in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-07 17:43:36 +02:00
Hai Pham
36b63c92c3 ARM: renesas: Add R8A779G0 V4H White Hawk board code
Add board code for R8A779G0 V4H White Hawk board.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Synchronize configuration symbols which are now switched to Kconfig
        Mallocate gd->bd->bi_boot_params, i.e. drop the assignment
        Sort headers, use clrbits_le32(), use BIT macros where appropriate
        Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-04-07 17:13:28 +02:00
Hai Pham
e4e242b296 ARM: renesas: Add R8A779G0 V4H Kconfig entry and PRR ID
Add Kconfig entry and PRR ID to support R8A779G0 V4H SoC.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update commit message]
2023-04-07 17:13:28 +02:00
Tho Vu
2ea98fc9f9 ARM: dts: renesas: Add R8A779G0 V4H White Hawk DTs
Add DTs for R8A779G0 V4H White Hawk CPU and BreakOut boards.

Based on Linux next 20230228 DTs up to
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync with Linux next 20230228, update commit message
        Rename DTs to match Linux, which has dash between white-hawk]
2023-04-07 17:13:28 +02:00
Hai Pham
2ed192361e ARM: dts: renesas: Add R8A779G0 V4H DT extras
Add R8A779G0 V4H DT extras for U-Boot.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update compatible string to match latest upstream]
2023-04-07 17:13:28 +02:00
Phong Hoang
2c8941659d ARM: dts: renesas: Add R8A779G0 V4H DT
Add initial DT support for R8A779G0 (R-Car V4H). Based on Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync with Linux next 20230228, update commit message]
2023-04-07 17:13:28 +02:00
Hai Pham
de4c777e3e pinctrl: renesas: Add R8A779G0 V4H PFC tables
Add pinctrl tables for R8A779G0 V4H SoC.

Based on Linux next 20230228 PFC tables tables up to
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync with Linux next 20230228, sort sh_pfc_pinconf_set voltage args]
2023-04-07 17:13:28 +02:00
Hai Pham
53f27dda29 clk: renesas: Add R8A779G0 V4H clock tables
Add clock tables for R8A779G0 V4H SoC from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

There is an adjustment to the clock tables to make them easier suitable
for U-Boot, PLL2 is not treated as GEN4 PLL type PLL2_VAR, but rather a
plain PLL2. This should be sufficient until PLL2_VAR is implemented in
the clock core.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync with Linux next 20230228 . Update from CLK to CPG core driver
        Treat PLL2 as non-PLL2_VAR for now]
2023-04-07 17:13:28 +02:00
Tho Vu
0296ec364d dt-bindings: clock: Add R8A779G0 V4H CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the
Renesas R-Car V4H (R8A779G0) SoC from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00
Tho Vu
3813c3c0a5 dt-bindings: power: Add R8A779G0 V4H SYSC power domain definitions
Add power domain indices for R-Car V4H (R8A779G0) from Linux next
commit 058f4df42121 ("Add linux-next specific files for 20230228")

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update to linux next 20230228 state]
2023-04-07 17:13:28 +02:00