Commit graph

50322 commits

Author SHA1 Message Date
Lukasz Majewski
afa9609eca bootcount: spl: Enable bootcount support in SPL
New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been
added to allow drivers/bootcount code re-usage in SPL.

This code is necessary to use and setup bootcount in SPL in the case of
falcon boot mode.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-10 20:37:05 -04:00
Marcel Ziswiler
71cb3d7c78 apalis_t30: fix optional pcie port reset for reliable pcie operation
Allow optionally bringing up the Apalis type specific 4 lane PCIe port
as well as the PCIe switch as found on the Apalis Evaluation board. In
order to avoid violating the PCIe reset timing do this by overriding the
tegra_pcie_board_port_reset() function. Note however that both the
Apalis type specific 4 lane PCIe port as well as the regular Apalis PCIe
port are also left disabled in the device tree by default.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:30 -07:00
Marcel Ziswiler
b4f9010428 apalis_t30: fix pcie port 0 and 1 pin muxing
Fix optional Apalis type specific 4 lane PCIe port 0 and Apalis PCIe
port 1 pin muxing.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:30 -07:00
Marcel Ziswiler
6ab8a2b0ee apalis_t30: describe pcie ports
Add some more comments describing the various PCIe ports available.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:30 -07:00
Marcel Ziswiler
f1333417e8 apalis-tk1: fix pcie reset for reliable gigabit ethernet operation
It turns out that the current PCIe reset implementation in the PCIe
board init function is not quite working reliably due to PCIe reset
timing violations. Fix this by overriding the
tegra_pcie_board_port_reset() function.

Also allow optionally bringing up the PCIe switch as found on the Apalis
Evaluation board. Note however that the Apalis PCIe port is also left
disabled in the device tree by default.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Marcel Ziswiler
de42975141 power: as3722: add as3722_ldo_set_voltage signature to header file
Just like the already present as3722_sd_set_voltage() add the currently
missing signature of the as3722_ldo_set_voltage() function to its header
file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Marcel Ziswiler
355560d588 pci: tegra: introduce weak tegra_pcie_board_port_reset() function
Introduce a weak tegra_pcie_board_port_reset() function by default
calling the existing tegra_pcie_port_reset() function. Additionally add
a tegra_pcie_port_index_of_port() function to retrieve the specific PCIe
port index if required. This allows overriding the PCIe port reset
functionality from board specific code as e.g. required for Apalis T30
and Apalis TK1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Marcel Ziswiler
4616e33b6a power: as3722: fix ldo_get/set_enable for ldo index bigger than 7
Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an
index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL
registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use
of both. While at it also actually use the enable parameter of the
ldo_set_enable() function which now truly allows disabling as opposed to
only enabling LDOs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:20 -07:00
Marcel Ziswiler
c0cb8c8e86 apalis-tk1: add missing as3722 gpio0 configuration
As the AS3722 GPIO0 is also a not connected on our Apalis TK1 module
explicitly configure it to high-impedance as well.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:20 -07:00
Sanchayan Maity
1c1238f1e1 configs: apalis-tk1: fix boot failure using ext4 rootfs
Trying to boot from an ext4 rootfs fails due to us defaulting to ext3.
While the downstream T20/T30 L4T kernel has issues with ext4 later TK1
L4T should work just fine with it. Hence enable ext4 for sdboot and
usbboot on TK1.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:20 -07:00
Marcel Ziswiler
51cd5a147d configs: colibri_t20: enable mtd
Enable CONFIG_MTD as well to make sure UCLASS_MTD is available

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:10 -07:00
Marcel Ziswiler
fa91fda8c3 configs: harmony: enable live tree, mtd and ubi
U-Boot on Harmony recently got broken by ongoing driver model resp. live
tree migration work:

U-Boot 2018.03-rc3 (Feb 21 2018 - 15:43:08 +0100)

TEGRA20
Model: NVIDIA Tegra20 Harmony evaluation board
Board: NVIDIA Harmony
DRAM:  1 GiB
Video device 'dc@54200000' cannot allocate frame buffer memory -ensure
the device is set up before relocation
Error binding driver 'tegra_lcd': -28
Some drivers failed to bind
Error binding driver 'generic_simple_bus': -28
Some drivers failed to bind
initcall sequence 3ffa86d0 failed at call 00121dc0 (err=-28)

This commit fixes this by enabling live tree, MTD and UBI for Harmony as
well.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:10 -07:00
Marcel Ziswiler
4b11a6296a mtd: nand: tegra: convert to driver model and live tree
The Tegra NAND driver recently got broken by ongoing driver model resp.
live tree migration work:

NAND:  Could not decode nand-flash in device tree
Tegra NAND init failed
0 MiB

A patch for NAND uclass support was proposed about a year ago:
https://patchwork.ozlabs.org/patch/722282/

It was not merged and I do not see on-going work for this.

This commit just provides a driver model probe hook to retrieve further
configuration from the live device tree. As there is no NAND ulass as of
yet (ab)using UCLASS_MTD. Once UCLASS_NAND is supported, it would be
possible to migrate to it.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:10 -07:00
Tom Rini
da342f06b3 Merge git://git.denx.de/u-boot-ubi 2018-05-10 07:17:14 -04:00
Tom Rini
e8f80a5a58 Merge git://git.denx.de/u-boot-sunxi 2018-05-09 12:58:06 -04:00
Yogesh Gaur
a6f2a6eafe driver: net: fsl-mc: updated copyright info
Updated copyright info for the issues reported after running
check-legal test.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Jagdish Gediya
e8c669a3e6 mtd: nand: fsl_ifc: Fix nand waitfunc return value
As per the IFC hardware manual, Most significant byte in nand_fsr
register is the outcome of NAND READ STATUS command.

So status value need to be shifted as per the nand framework
requirement.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Hou Zhiqiang
8b40f22900 armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust
Mask HRESET_B after cleared the the RCW_SRC, because in the workaround
we override the RCW_SRC and if HRESET_B is issued after the override
then SoC cannot find valid RCW as the RCW_SRC was overwritten and
result in hang. So we need to mask HRESET_B in case user asserts it,
and the PORESET_B should be asserted which leads to resampling of
cfg_rcw_src pins and loading of correct RCW_SRC.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Hou Zhiqiang
945fad57be armv8/fsl-lsch2: correct QMAN clock
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Sumit Garg
8044900a5b armv8: sec_firmware: Add support for multiple loadables
Enable support for multiple loadable images in SEC firmware FIT image.
Also add example "sec_firmware_ppa.its" file.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Takuma Ueba
6a265aba30 powerpc: mpc85xx: Improve Work-around for Erratum A005125
Work-around for Erratum A005125 must be applied to all cores.

Signed-off-by: Yoshihisa Morizumi <yoshi.morizumi@jp.fujitsu.com>
Signed-off-by: Takuma Ueba <ueba.takuma@jp.fujitsu.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ashish Kumar
7d3a532d5d armv8: ls1088: Update 1900MT/s DDR timing to bring consistency
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ashish Kumar
11d5f7d895 armv8: ls1088aqds: Enable mdio commands on u-boot prompt
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ruchika Gupta
b6bb93de75 armv8: sec_firmware: Remove JR3 from device tree node in all cases
JR3 was getting removed from device tree only if random number
generation was successful. However, if SEC firmware is present,
JR3 should be removed from device tree node irrespective of the
random seed generation as SEC firmware reserves it for it's use.
Not removing it in case of random number generation failure causes
the kernel to crash.

Random number generation was being called twice. This is not
required. If SEC firmware is running, SIP call can be made to the SEC
firmware to get the random number. This call itself would return
failure if function is not supported. Duplicate calling of random
number generation function has been removed.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ashish Kumar
1cb551cf6a armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Sriram Dash
bda33d3c6c armv8: layerscape: Avoid code duplication for TZASC Instantiation
TZASC controller configurations are similar. Put them in a macro and
avoid code duplication.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Jagdish Gediya
f195fad178 mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
Number of ECC status registers i.e. (ECCSTATx) has been increased in
IFC version 2.0.0 due to increase in SRAM size. This is causing
eccstat array to over flow.

So, replace eccstat array with u32 variable to make it fail-safe and
independent of number of ECC status registers or SRAM size.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Rajat Srivastava
1f55356411 spi: fsl_qspi: Introduce is_controller_busy function
Some SoCs have different endianness of QSPI IP if compared
to endianness of core. The function is_controller_busy()
checks if the QSPI controller is busy or not, considering
the endianness of the QSPI IP.

Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Patrice Chotard
87deefeccc ubifs: avoid assert failed in ubifs.c
This patch solves assert failed displayed in the console during a boot.
The root cause is that the ubifs_inode is not already allocated when
ubifs_printdir and ubifs_finddir functions are called.

Trace showing the issue:
feed 'boot.scr.uimg', ino 94, new f_pos 0x17b40ece
dent->ch.sqnum '7132', creat_sqnum 3886945402880
UBIFS assert failed in ubifs_finddir at 436
INODE ALLOCATION: creat_sqnum '7129'
Found U-Boot script /boot.scr.uimg

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-09 11:53:55 +02:00
Tom Rini
cc95535867 bootm.c: Correct the flush_len used in bootm_load_os()
In do_bootm_states when doing BOOTM_STATE_LOADOS we use load_end
uninitialized and Coverity notes this now.  This however leads down
another interesting path.  We pass this pointer to bootm_load_os and
that in turn uses this uninitialized value immediately to calculate the
flush length, and is wrong.  We do not know what load_end will be until
after bootm_decomp_image is called, so we must only set flush_len after
that.  All of this also makes it clear that the only reason we pass a
pointer for load_end to bootm_load_os is so that we can call lmb_reserve
on success.  Rather than initialize load_end to 0 in do_bootm_states we
can just call lmb_reserve ourself.

Reported-by: Coverity (CID: 175572)
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08 18:50:24 -04:00
Clément Péron
71412d7231 image: fit: Show signatures and hashes for configurations
The signature/hash information are displayed for images but nor for
configurations.

Add subnodes printing in fit_conf_print() like it's done in fit_image_print()

Signed-off-by: Clément Péron <peron.clem@gmail.com>
[trini: Add guards around fit_conf_print to avoid warnings]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-08 18:50:24 -04:00
Grygorii Strashko
218ac107c5 arm: bitops: fix find_next_zero_bit() for case size < 32
find_next_zero_bit() incorrectly handles cases when:
- total bitmap size < 32
- rest of bits to process

static inline int find_next_zero_bit(void *addr, int size, int offset)
{
	unsigned long *p = ((unsigned long *)addr) + (offset >> 5);
	unsigned long result = offset & ~31UL;
	unsigned long tmp;

	if (offset >= size)
		return size;
	size -= result;
	offset &= 31UL;
	if (offset) {
		tmp = *(p++);
		tmp |= ~0UL >> (32-offset);
		if (size < 32)
[1]
			goto found_first;
		if (~tmp)
			goto found_middle;
		size -= 32;
		result += 32;
	}
	while (size & ~31UL) {
		tmp = *(p++);
		if (~tmp)
			goto found_middle;
		result += 32;
		size -= 32;
	}
[2]
	if (!size)
		return result;
	tmp = *p;

found_first:
[3]  tmp |= ~0UL >> size;

^^^ algo can reach above line from from points:
 [1] offset > 0 and size < 32, tmp[offset-1..0] bits set to 1
 [2] size < 32 - rest of bits to process
 in both cases bits to search are tmp[size-1..0], but line [3] will simply
 set all tmp[31-size..0] bits to 1 and ffz(tmp) below will fail.

example: bitmap size = 16, offset = 0, bitmap is empty.
 code will go through the point [2], tmp = 0x0
 after line [3] => tmp = 0xFFFF and ffz(tmp) will return 16.

found_middle:
	return result + ffz(tmp);
}

Fix it by correctly seting tmp[31..size] bits to 1 in the above case [3].

Fixes: 81e9fe5a29 ("arm: implement find_next_zero_bit function")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-05-08 18:50:23 -04:00
Neil Armstrong
051ebe3228 cmd: add ADC cli commands
Add an 'adc' cli command to get information from adc devices and to read
"single shot" data.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08 18:50:23 -04:00
Mario Six
e097ce4304 pci: Don't use pci_indirect when DM is active
Declaration of indirect PCI bridges is not compatible with DM: Both
define PCI operations, but in different ways. Hence, don't use indirect
bridges if DM is active.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08 18:50:23 -04:00
Mario Six
86da8c12ef gdsys: drivers: Add gdsys_rxaui_ctrl driver
Add a driver for RXAUI control on IHS FPGAs.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08 18:50:23 -04:00
Mario Six
f0bcbe6c18 clk: Add ICS8N3QV01 driver
Add a driver for the ICS8N3QV01 Quad-Frequency Programmable VCXO.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:23 -04:00
Mario Six
9a519dfe8a ihs_mdio: Make DM-compatible
Make the ihs_mdio driver DM-compatible, while retaining the old
functionality for not-yet-converted boards.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:23 -04:00
Mario Six
9139ac9d49 ihs_mdio: Encapsulate register access
To prepare for DM conversion, encapsulate all register accesses in
function calls.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:22 -04:00
Ramon Fried
707e6ef964 db410c: set clk node to be probed before relocation
The clock node is used by the serial driver and it's needed
before relocation.
This patch ensures that the msm-serial driver can actually
use the clock node.

Signed-off-by: Ramon Fried <ramon.fried@linaro.org>
2018-05-08 18:50:22 -04:00
Patrice Chotard
da33b0a1ca ARM: dts: sti: Add stih410-b2260-u-boot.dtsi
STiH410 has 2 PHYs wired on the DWC3 IP, USB2 and USB3 PHYs.
As currently no U-boot driver is available for the USB3 PHY and to avoid
issue during DWC3 drive probe, we use DWC3 IP with only USB2 PHY
using stih410-b2260-u-boot.dtsi file.

Fixes: 2fd4242cc5 ("ubs: xhci-dwc3: Enable USB3 PHY when available")

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08 18:50:22 -04:00
Sam Protsenko
c90a760ffd arm: ti: boot: Extract PARTS_DEFAULT to boot.h
Eliminate code duplication: the same PARTS_DEFAULT was defined in
am57xx_evm.h and in dra7xx_evm.h. Extract it to environment/boot.h and
use in all OMAP5-based boards.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-05-08 18:50:22 -04:00
Marek Vasut
792557d111 spl: socfpga: Generate Arria10 SFP header V1
Generate SoCFPGA boot header version 1 instead of version 0 for Arria10.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
2018-05-08 21:08:42 +02:00
Marek Vasut
cece78fafe tools: socfpga: Add SFP image V1 support
Add support for the SoCFPGA header v1 , which is used on Arria 10.
Thus far the mkimage-socfpga image only supported header format v0
used on Cyclone V and Arria V, but is not supported on Arria 10.
The layout of the v0 and v1 header is similar, yet there are a few
differences, see the patch body for details.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
2018-05-08 21:08:42 +02:00
Marek Vasut
9f0021a50b tools: socfpga: Stop using global struct socfpga_image
The structure is passed around correctly, create local instances
where necessary and zap the global struct socfpga_image instance.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
2018-05-08 21:08:42 +02:00
Marek Vasut
662abc4fc5 image: socfpga: Add SFP image version 1 definition
Add support for the SoCFPGA header v1, which is used on Arria 10.
The layout of the v0 and v1 header is similar, yet there are a few
differences which make it incompatible with previous v0 header, so
add a new entry.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
2018-05-08 21:08:42 +02:00
Marek Vasut
34fc2a6edf ARM: socfpga: Add boot trampoline for Arria10
The Arria10 uses slightly different boot image header than the Gen5 SoCs,
in particular the header itself contains an offset from the start of the
header to which the Arria10 jumps. This offset must not be negative, yet
the header is placed at offset 0x40 of the bootable binary. Therefore, to
jump into U-Boot, add a trampoline just past the Arria10 boot header and
point to this trampoline at fixed offset from the header generated using
the mkimage -T socfpgaimage_v1 . Note that it is not needed to jump back
to offset 0x0 of the image, it is possible to jump directly at the reset
label and save processing two instructions.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Chin Liang See <chin.liang.see@intel.com>
2018-05-08 21:08:42 +02:00
Tom Rini
14249635b6 Merge git://git.denx.de/u-boot-mmc 2018-05-08 13:47:39 -04:00
Tom Rini
1ccd3f14ca Merge git://git.denx.de/u-boot-uniphier 2018-05-08 13:47:26 -04:00
Tom Rini
6417572efa lib/Kconfig: Mark OF_LIBFDT_OVERLAY as depending on OF_LIBFDT
The overlay code is only useful when OF_LIBFDT is set, so mark it as
depending on that first.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-08 09:07:41 -04:00
Neil Armstrong
59beb238d5 adc: add Amlogic Meson SAR ADC driver
This patch adds the driver for the Amlogic Meson Successive Approximation
Register (SAR) A/D Converter based on the Linux IIO driver thanks to the
great work of Martin Blumenstingl.
The driver has been adapted to U-Boot and the ADC UClass.

This patch depends on the regmap "regmap: add regmap_update_bits() helper"
patch and has been tested using the newly introducted "adc" CLI command
in the "cmd: add ADC cli commands" patch.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08 09:07:40 -04:00