Commit graph

70 commits

Author SHA1 Message Date
Neil Armstrong
adbff64af7 board: amlogic: vim3: add support for dynamic PCIe enable
The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.

This adds this dynamic switching right before booting Linux
and the configuration steps in the boards documentation.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed warning by replacing min() by min_t()]
2020-10-05 17:59:45 +02:00
Neil Armstrong
5aeecbcf81 board: amlogic: add a vim3 specific board support
The VIM3 will need a specific code to enable PCIe if enabled in the MCU,
thus add a specific board support for VIM3 & VIM3L.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Neil Armstrong
394c6b0ff1 board: s400: generate unique mac address from SoC serial
Enable unique mac address generation from SoC serial on S400 board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Christian Hewitt
8888d83773 boards: amlogic: add Odroid C4 support
Odroid C4 is an Amlogic SM1 device, the board config and board documentation
are adapted from the Odroid-N2 support from the same vendor.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: fix odroid-c4.rst typos and structure]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Pascal Vizeli
6de936b011 board: amlogic: Add Odroid-N2 board support
Add a proper Odroid-N2 board support to handle the Ethernet MAC
address stored in the in-SoC eFuses.

Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Neil Armstrong
9c55f5d112 board: amlogic: add board doc files to MAINTAINERS
Add the recently added reStructuredText board documentation in the
appropriate MAINTAINERS files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Neil Armstrong
0ce3639d6f board: amlogic: move boards doc into doc/board/amlogic
Move the natural text Amlogic board README files to doc/board/amlogic
into reStructuredText and :
- add reStructuredText markup for bash code
- fix secondary titles markup
- move board support into global support matrix

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Tom Rini
3fadc9ea2f amlogic: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

Cc: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: u-boot-amlogic@groups.io
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Jerome Brunet
e13e7c9dae arm64: dts: meson: add libretech-pc support
Add support for the Amlogic based libretech-pc platform.
This platform comes with 2 variant, based on the s905d or s912 SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: update board/amlogic/q200/MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Christian Hewitt
9c84c21009 boards: amlogic: add Khadas VIM3L support
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07 14:50:28 +01:00
Guillaume La Roque
be2ffa1656 configs: sei610: Add config file to fix userdata size
Add separate config file to handle the different eMMC size on
the sei610 board.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:54:37 +02:00
Neil Armstrong
b8ada582cf boards: amlogic: add SEI610 support
Add support for the customer board SEI610 manufactured by SEI Robotics
with the following specifications:
 - Amlogic S905X3 ARM Cortex-A55 quad-core SoC
 - 2GB DDR4 SDRAM
 - 10/100 Ethernet (Internal PHY)
 - 1 x USB 3.0 Host
 - 1 x USB Type-C DRD
 - 1 x FTDI USB Serial Debug Interface
 - eMMC
 - SDcard
 - Infrared receiver
 - SDIO WiFi Module

Like it's SEI510 counterpart, the boot flow is designed to boot
Android AOSP built for the Yukawa Android device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:47:00 +02:00
Andreas Färber
30b8c2b6cf configs: Add Khadas VIM3 defconfig
Derived from odroid-n2_defconfig and README.odroid-n2.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 11:59:44 +02:00
Daniel Drake
4ae9747804 board: amlogic: document alternative libretech-cc installation methods
As already documented in this README, several binaries must be
glued together in order to boot the device.

Extend the documentation to cover the prebuilt binaries
(saving you the hassle of installing ancient cross-compilers),
and also mention the open source replacements for the encryption
tool (which is especially useful if you want to avoid requiring
32-bit x86 binaries in your build system).

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 10:46:08 +02:00
Tom Rini
60f38d82c4 - amlogic: add support for the SEI Robotic SEI510
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl1RU+gACgkQd9zb2sjI
 SdE/OBAAgytrPuru4s5bBwIqBpMk2IbmNsuAOG6FY6plXpUyaYRsn+wUZikPkkif
 Wv9f/iB2Zv7wHtKnMbM8dafCViaMmU7m5mF71GS2Xt7dEfZZQWN/RWwKe5UfTVxF
 7hI5RU6OQMN8kwEB/AJIoFzhxzND9I2E5gocAafGn+dakmxoNR54rr//7DGlULNM
 kOYucXV5oYwDxc14nUXkYP13UrKds0bN0iWk+s367uPUcUuzEprD+/LV0NYTqLMp
 udCE0RLEvA8b3TxZeR9skjPWwBFc7crzWRsVDBdKujmTEvsZdEoBo0FbqEn6nr1u
 m5Q2dMYn2TvRHL4t7fppeqAryjE6JPmyuHUE4F+umvIs3QOjijgTPmG3pC0Trb1Z
 +iXrcoBbv+/zCbt5TQpPqYwW9wp3VSHGZlY9NZKS+Lwo/+Kj+JEXjzmzpASO8ruU
 5NCQE1mNZtb/i2UDN649NptoNSxV+jP5qjh9rJZuQMF5oL6e3UMrfz/d7EeWOvSY
 MKRZIGm+HEPXwR7dOleHAuHDHBZ5ztWGlYyNMjtgTvgHk499tvvZYQ00LrHU1Uze
 wKeK3uN5UQujcJf14wM2AhHZhB22ZUy4onshY8rI4lUq1oRpc8nZ+31R+xXmuC/o
 wt+KmyTdD4Eva1batGmM1zpl3bSgDndyBo5FNlWH1xY5jZU/6Ro=
 =M0sg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190812' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- amlogic: add support for the SEI Robotic SEI510
2019-08-12 23:03:35 -04:00
Jerome Brunet
0998367515 boards: meson: add g12a sei510
The SEI510 board is based on the Amlogic S905X2 SoC
from the Amlogic G12A SoC family.

The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module

The board default behaviour is for booting Android and triggers
fastboot on recovery or reboot mode.

USB vendor ID (used by fastboot) is 0x18d1 (Google) for
default udev rules for existing android users work out of the box.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12 10:04:03 +02:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Neil Armstrong
b160fac9f7 board: amlogic: add support for Odroid-N2
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd
with the following specifications:

 - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
 - 4GB DDR4 SDRAM
 - Gigabit Ethernet
 - HDMI 2.1 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 3.0 Host, 1 x USB OTG
 - eMMC, microSD
 - Infrared receiver

The board directory is W400, the name of the Amlogic Reference Design
of Amlogic G12B with Gigabit boards, which will be used for similar
boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31 12:10:58 +02:00
Tom Rini
0b7f1a95df - fix khadas-vim README
- add support for unique generated MAC adresses from SoC serial,
   limited to Amlogic GXL/GXM boards for now
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdHgg6AAoJEHfc29rIyEnRjVkP/RmwsBgIdn/0LnuU5JQIcmNI
 S8fOV2u5YY4q4hX/5qgg6uN7/yONtiZjw4bxLJGLCj0SUQ6Tv8KgE+Jh1vswek6P
 ceOsIBfyg3ZX6INkH/moHH8/yl1NpirYjNGxw1Bg9ctBHPR9smQdh50pMyDy67mG
 E2Dja/TtOuggF6N98WSu1jB8UBA55CbEEBj1PkQt7K9bXJs9cEGSrpyZLEJvsRmL
 Pot1l1A9XKhRS3PylgoxmXWNXFD8wAk8LHEACUsxnybiWoIW5Dfao/4PSmPigXAp
 n9V3tU/OQECar0CKOtCod5pS5z8TVPuuaay/Y/+ijLlCktJBwkSaGWIhf9ILOjOW
 UTlcsFDR4KDqaEFKNDoOtOGYpczFrduU0b1hq1qu4hLV7YIxg738DoRr30JM5Lwa
 gJbUCHkPRnxVB3UztsctmQwZwfKmAdvd1CrzKqFBvemrQrf2AwfBweiAv8/AUzqq
 c7o0K0WdP/03CkmBU8KbyFn2N1X2VT1KlqgEVfRTq7UWTiLnS4j9AAiwNapGOb4M
 Ox7eODLbLw3UyZYjDuBHyPYa8uPhtVDpuFCPn2JnwFdbnT4kfE535pCKT/vbasYd
 0UQkgUPoIHm0VGhxv0hkjmrjqgv5CLQyAYhJVGATTH0Nc9dYGFKF/Gm6YIUpjUuW
 nhSh5HHVCg4dkogiMJ7u
 =BL1s
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190704' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- fix khadas-vim README
- add support for unique generated MAC adresses from SoC serial,
  limited to Amlogic GXL/GXM boards for now
2019-07-08 16:02:19 -04:00
Neil Armstrong
1f83431f00 board: amlogic: add mailing-list to MAINTAINERS
Add missing mailing-list to the amlogic boards MAINTAINERS file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 11:36:52 -04:00
Neil Armstrong
3f1f9f08eb board: amlogic: Generate unique MAC address for Q200 and P212 based boards
Enable unique MAC address generation for boards usins SoCs having
a known functional and valid unique serial number.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Andreas Färber
aca71d6927 board: amlogic: vim: Fix README
Unlike the BayLibre repos Khadas' repo defaults to using native gcc,
so specify the CROSS_COMPILE setting matching the prescribed toolchain.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Neil Armstrong
7336cf34d1 boards: amlogic-g200: remove phy reset
The PHY reset is now handled by the MAC driver, remove this leftover.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31 10:04:15 +02:00
Neil Armstrong
c6e4e8f99c board: amlogic-q200: fix Khadas VIM2 README
The vendor U-boot branch and defconfig was wrong for the
Khadas VIM2, fix this.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:59 +02:00
Jerome Brunet
b050a30016 boards: meson: add g12a u200
The Amlogic U200 board is based on the Amlogic S905D2 SoC
from the Amlogic G12A SoC family.

The board has the following specifications :
 - Amlogic S905D2 ARM Cortex-A53 quad-core SoC
 - XGB DDR4 SDRAM
 - 10/100 Ethernet (Internal PHY)
 - 1 x USB 3.0 Host
 - eMMC
 - SDcard
 - Infrared receiver
 - SDIO WiFi Module
 - MIPI DSI Connector
 - Audio HAT Connector
 - PCI-E M.2 Connector

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00
Neil Armstrong
4a327e8329 boards: Amlogic: Add support for Libretech-AC
LibreTech AC is a single board computer manufactured by Libre Technology
with the following specifications:

 - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz
 - ARM Mali 450 GPU
 - 512MiB DDR4 SDRAM
 - 10/100 Ethernet
 - HDMI 2.0 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 2.0 Host
 - eMMC, SPI NOR Flash
 - Infrared receiver

The u-boot specific code is the same as the P212 support,
so use the P212 board support code with a distinct defconfig
and config include files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:50:46 +02:00
Mohammad Rasim
ead6b40695 ARM: board: meson: add p201 board
This adds support for p201 reference boards

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Mohammad Rasim
edee72b8bc ARM: board: meson: add p200 board
This adds the defconfig and README files for p200 board

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Mohammad Rasim
4778afcbe7 ARM: board: meson: rename odroid-c2 to p200
This renames the odroid-c2 to p200 and set it as the default GXBB board
Other boards (odroid-c2 and nanopi-k2) will inherit from p200

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:48:31 +02:00
Tom Rini
93e72ac472 Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
 - net: designware: add meson meson compatibles
 - Amlogic Meson cleanup for AXG SoC support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb/AwoAAoJEHfc29rIyEnR2dMQANCsuWQzKASCLgUzeL/KWhQ8
 gj1YEVGbS0meQ35hNo0hL6qfN4VkjazawyWnb40HVVADBjil42QuxN9rncovg69Q
 ZvPEo4XYNCkDzOU3UmoR2rjxxGICVFY6GCOuNbqzvB2x4gWJmoUeByqewKW2g2Zp
 jyjbzYvJ+r8wLtUFbdqaGvsHHC8hiIkjyeaqdXUc6NHJrGYasRuOsCO92bEioYC1
 XPh76c2ABAnbzJy7GArdlBbDOQrQxoEskVeP47ZjiPywXxGCkgHaRSXaUKzpz30G
 8MrA5AciL6pmurmsM0APlgvJwL7qaX1P6NxiJ+12prWWfAk1ZC2/MEKVZY+gO/CF
 vUAyzhus1oJ5JjccCngy/1ftkIReueSbUrzGYFvqhihs9g4QyRpi7F5MDKX0MvP2
 uk+XXStXs+rOZ2YdMFlV8l6G12TijcViZVmVHdh8qdl4t8WFlv7gENVUM+0mhyu2
 x5OsoYz5w2h9hCh/CB3oIZfyJBe5VZVHZ2fWIRZJ72J7toUGMewlKYQq2LOv7A9q
 w6vRGnza3fSPUZgYenznohaeo9vXG/WX7cNSPQiNBoiGeC+Y2ko5NHe2MIEnUD4c
 amp21KA6rWnWeHHvDbwo5DJ+NhCd6uMgkiZDLCuiTtns1/a03l0V6kgOvQLIBjhK
 KxBWBn6+rDPq1wJxhxab
 =Oo1g
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic

Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
- net: designware: add meson meson compatibles
- Amlogic Meson cleanup for AXG SoC support
2018-11-29 15:16:58 -05:00
Jerome Brunet
b890acc743 ARM: meson: factorize common code out amlogic's boards
Now we have moved all the Amlogic board support to common generic board code,
we can move the identical board_init() and ft_board_setup() functions to
weak functions into the board-common mach-meson file.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Neil Armstrong
b72794e37e board: amlogic: add support for S400 board
The S400 board is the Amlogic AXG SoC reference board including :
 - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz
 - 1GB DDR4 SDRAM
 - 10/100 Ethernet
 - 2 x USB 2.0 Host
 - eMMC
 - Infrared receiver
 - SDIO WiFi Module
 - MIPI DSI Connector
 - Audio HAT Connector
 - PCI-E M.2 Connectors

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Jerome Brunet
33e3378091 ARM: meson: rework soc arch file to prepare for new SoC
We are about to add support for the Amlogic AXG SoC. While very close to
the Gx SoC family, we will need to handle a few thing which are different
in this SoC. Rework the meson arch directory to prepare for this.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Jerome Brunet
96a739b460 ARM: rework amlogic configuration
Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving
the board Kconfig into the mach-meson Kconfig to make it easier to add
new boards for a SoC architecture and add a custom config header or custom
board handler for a platform.

This drops the board CONFIGs and the duplicate boards configs headers in
favor of a single meson64.h config header.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:52 +01:00
Jerome Brunet
d54e03b612 board: amlogic: factorise gxbb boards
The nanopi-k2 and the odroid-c2 are similar enough to be supported
by the same u-boot board. This change use odroid-c2 u-boot board
for the nanopi-k2 as well. Dedicated defconfig are kept to customize
the names and device tree.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Neil Armstrong
302987b6c5 board: amlogic: move khadas-vim2 as q200 ref board
The Khadas vim2 derive from amlogic s912 reference design (Q200).

This patch moves the khadas-vim2 board support to a generic Q200 board,
while keeping a dedicated defconfig to customize the names and device tree.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Jerome Brunet
8bbfb40e57 board: amlogic: remove p212 derivatives
The Khadas vim and the libretech aml-s905x-cc (aka Potato) derive
from amlogic s905x reference design (P212).

All the code in these board is a copy/paste from the p212, which is
tedious to maintain. This change use p212 u-boot board for all these
boards, while keeping a dedicated defconfig to customize the names
and device tree.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:40:51 +01:00
Loic Devulder
8afd4ea5b9 ARM: meson: Add Khadas VIM2 board support
This adds platform code for the Khadas VIM2 board based on a
Meson GXM (S912) SoC with the Meson GXM configuration.

This initial submission supports UART, MMC/SDCard and Ethernet.
USB is partially supported.

All the code is from Neil Armstrong! I just rebased the code, do
some cleanup and tested on my board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Loic Devulder <ldevulder@suse.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10 13:32:40 -04:00
Jasper kcoding
a92e52137d amlogic: board p212: Fix Ethernet PHY init
Without this patch the Ethernet PHY on the p212 board does not get
fully configured.
When this happens Ethernet does not function.

The similar libretech-cc and khadas-vim boards have this code already.
That's why the Ethernet on these boards do work.

Signed-off-by: Jasper Kcoding <jasperkcoding@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-05 16:02:34 -04:00
Beniamino Galvani
0b600918d5 boards: amlogic: remove ethernet gpio reset code from boards
The reset is already handled by the designware driver using
information from device tree.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-08-24 13:19:53 -04:00
Loic Devulder
f0fd307951 Fix README for Khadas VIM board
Explicitly add 'python' call for 'acs_tool.pyc', to avoid failed
execution on some OSes.

Signed-off-by: Loic Devulder <ldevulder@suse.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-20 15:55:10 -04:00
Neil Armstrong
c95848cdec boards: amlogic: Fix boards README
Fix typos and update the supported devices for all Amlogic boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19 16:31:36 -04:00
Thomas McKahan
eee45b4f54 boards: amlogic: Add FriendlyElec NanoPi K2 board support
This adds platform code for the FriendlyElec NanoPi K2 board based on a
Meson GXBB (S905) SoC with the Meson GXBB configuration.

This initial submission only supports:
- UART
- MMC/SDCard
- Ethernet
- Reset Controller
- Clock controller

Cc: Yuefei Tan <yftan@friendlyarm.com>
Signed-off-by: Thomas McKahan <tonymckahan@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19 16:17:58 -04:00
Beniamino Galvani
2e668af553 meson: use the clock driver
Use the clk framework to initialize clocks from drivers that need them
instead of having hardcoded frequencies and initializations from board
code.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-19 07:31:47 -04:00
Neil Armstrong
f0f3762cb7 ARM: meson: rename GXBB to GX
Taking into account the Amlogic Family name starts with GX, including
the GXBB, GXL and GXM SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08 09:07:34 -04:00