Commit graph

28 commits

Author SHA1 Message Date
Michal Simek
cc7978bef9 ARM: zynq: Remove DTC 1.4.2 warnings
DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name,
but no reg property

This patch is fixing them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:38 +01:00
Masahiro Yamada
621a93e140 ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
Commit 9f56917ab8 ("dm: core: make simple-bus compatible to
simple-mfd") made possible to import the following commit:

Linux commit: bc5ba9b98435bf76d92e0954da1784695aa449f1

The SLCR (System-Level Control Registers) block is an MFD (Multi
Function Device) rather than a bus.

"simple-mfd" seems a more suitable compatible string than "simple-bus".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Michal Simek
77bb73decb ARM: zynq: Align devcfg node
- Have compatible string as the first property
- Sync with Linux kernel dtsi
- Add missing interrupt properties

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Moritz Fischer
20fe3f1791 ARM: dts: Updated devicetree bindings for Zynq 7000 platform
Added addtional bindings required for FPGA Manager operation
of the Xilinx Zynq Devc configuration interface.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Moritz Fischer
4c987271b3 ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
58fab4cd9c ARM: zynq: Add interrupt-controller property to gpio nodes
GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.

Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
e5c343dddc ARM: zynq: Clean DTSI coding style
Fix minor indentation problems.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Simon Glass
035c6b271d arm: zynq: dts: Add U-Boot device tree additions
We need to mark some device tree nodes so that they are available before
relocation. This enables driver model to find these automatically. In the
case of SPL it ensures that these nodes will be retained in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Jagan Teki
70676cb3b5 dts: zynq: Add zynq qspi controller nodes
This patch adds zynq qspi controller nodes in zynq-7000.dtsi.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:01 +05:30
Michal Simek
d50cb3d64b ARM: zynq: DT: Add missing interrupt for L2 pl310
Add pl310 interrupt to the Zynq devicetree.

Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:26 +02:00
Michal Simek
b4e9eaf71f ARM: zynq: DT: Get rid of ps-clk-frequency
ps-clk-frequency is platform specific setting and shouldn't be the part
of DTSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:25 +02:00
Michal Simek
05e7ca63b7 ARM: zynq: DT: Update years in copyright
Trivial.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:25 +02:00
Michal Simek
461c388806 ARM: zynq: DT: Add reference to bus node
For adding OCM memory in platform DTS is necessary to have reference to
amba bus.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:24 +02:00
Michal Simek
e913ce2ad5 ARM: zynq: DT: Add pinctrl node
Add pinctrl node to DTSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:24 +02:00
Michal Simek
5ee236a3ea ARM: zynq: DT: Cleanup address-cells and size-cells
Remove unneeded address-cells form intc node because it is already setup
in parent node.
Add missing address-cells and size-cells to eth node to be shared for
every platform DTSes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:24 +02:00
Michal Simek
b346bd1d2d ARM: zynq: DT: Clean up timer device tree nodes
Separate IRQ cells from each other for easier reading.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:23 +02:00
Michal Simek
7e163363fb ARM: zynq: DT: Use the zynq binding with macb
Use the new zynq binding for macb ethernet, since it will disable half
duplex gigabit like the Zynq TRM says to do. Also allow the compatible
cadence gem binding that won't disable half duplex but works otherwise.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:23 +02:00
Michal Simek
08305feb8e ARM: zynq: DT: Fix GEM register area size
The size of the GEM's register area is only 0x1000 bytes.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:22 +02:00
Michal Simek
40b383fa84 spi: Fix zynq SPI binding
Zynq is using Cadence IP where binding is documented in the Linux kernel
and there is no reason to use different binding.
Synchronize it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:22 +02:00
Michal Simek
3ffcdc7aaf ARM: zynq: DT: Remove 222 MHz OPP
Due to dependencies between timer and CPU frequency, only changes by
powers of two are allowed. The clocksource driver prevents other
changes, but with cpufreq and its governors it can result in being
spammed with error messages constantly. Hence, remove the 222 MHz OPP.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:22 +02:00
Michal Simek
8a8c46a65d ARM: zynq: DT: Migrate UART to Cadence binding
The Zynq UART is Cadence IP and the driver has been renamed accordingly.
Migrate the DT to use the new binding for the UART driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:22 +02:00
Michal Simek
bece06ce0c ARM: zynq: DT: Add a fixed regulator for CPU voltage
To silence the warning
   cpufreq_cpu0: failed to get cpu0 regulator: -19
from the cpufreq driver regarding a missing regulator,
add a fixed regulator to the DT.
Zynq does not support voltage scaling and the CPU rail should always be
supplied with 1 V, hence it is added in the SOC-level dtsi.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:21 +02:00
Michal Simek
fb1a5061f0 ARM: zynq: DT: Add missing nodes to DTSI
Add ADC, CAN, GPIO, MC, DMA, DEVCFG, USB, Watchdog IPs to DTSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:21 +02:00
Michal Simek
a0cb47f1a1 ARM: zynq: DT: Use the right names for nodes
Based on SPEC you right names with addresses.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:21 +02:00
Jagan Teki
cdc9dd0750 spi: zynq_spi: Add fdt support in driver
Now zynq spi driver platform data is controlled by devicetree,
enable the status by saying "okay" on respective board dts to use
the devicetree generated platdata.

Ex:
&spi1 {
	status = "okay";
};

Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:15:03 +05:30
Jagan Teki
a8a8fc9cee dts: zynq: Add zynq spi controller nodes
This patch adds zynq spi controller nodes in zynq-7000.dtsi.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:15:03 +05:30
Masahiro Yamada
580a54c5d4 zynq: import zynq-7000.dtsi from Linux Kernel
Our current motivation is to use OF initialization for RAM and UART.
But adding full DTS would be helpful in future, for instance,
for OF configuration of Ethernet, MMC, USB, etc.

This commit imports arch/arm/boot/dts/zynq-7000.dtsi from Linux 3.15-rc5
and adjusts the license comment block for SPDX.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:29 +02:00
Jagannadha Sutradharudu Teki
f8f36c5dda dts: zynq: Add basic fdt support
This patch provides a basic fdt support for zynq u-boot.

zynq-7000.dtsi-> initial arch dts file
zynq-zed.dts -> initial zed board dts file
more devices should be added in subsequent patches.

u-boot build: once configuring of a board done
for building dtb with zynq-zed.dts as an input
zynq-uboot> make DEVICE_TREE=zynq-zed

Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00