Commit graph

752 commits

Author SHA1 Message Date
Vladimir Oltean
f27bc8afd5 net: phy: fixed: Be compatible with live OF tree
On systems that use CONFIG_OF_LIVE, the "ofnode" type is defined
as const struct device_node *np, while on the flat DT systems it
is defined as a long of_offset into gd->fdt_blob.

It is desirable that the fixed PHY driver uses the higher-level
ofnode abstraction instead of parsing gd->fdt_blob directly,
because that enables it to work on live OF systems.

The fixed PHY driver has used a nasty hack since its introduction in
commit db40c1aa1c ("drivers/net/phy: add fixed-phy /
fixed-link support"),
which is to pass the long gd->fdt_blob offset inside int phydev->addr
(a value that normally holds the MDIO bus address at which the PHY
responds). Even ignoring the fact that the types were already
mismatched leading to a potential truncation (flat OF offset was
supposed to be a long and not an int), we really cannot extend this
hack any longer, because there's no way an int will hold the other
representation of ofnode, the struct device_node *np.

So we unfortunately need to do the right thing, which is to use the
framework introduced by Grygorii Strashko in
commit eef0b8a930 ("net: phy: add ofnode node to struct phy_device").
This will populate phydev->node for the fixed PHY.

Note that phydev->node will not be valid in the probe function, since
that is called synchronously from phy_device_create and we really have
no way of passing the ofnode directly through the phy_device_create API.
So we do what other drivers do too: we move the OF parsing logic from
the .probe to the .config method of the PHY driver. The new function
will be called at phy_config() time.

I do believe I've converted all the possible call paths for creating
a PHY with PHY_FIXED_ID, so there is really no reason to maintain
compatibility with the old logic of retrieving a flat OF tree offset
from phydev->addr. We just pass 0 to phydev->addr now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210216224804.3355044-2-olteanv@gmail.com>
[bmeng: keep fixedphy_probe(); update mdio-uclass.c to handle fixed phy]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Bin Meng
33aad0b092 dm: mdio: Use ofnode_phy_is_fixed_link() API
Switch to use the ofnode_phy_is_fixed_link() API which can support
both the new and old DT bindings.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Michael Walle
714555374f net: dsa: remove master santiy check
Because we probe the master ourselves (and fail if there is no master),
it is not possible that we don't have a master device.

There is one catch though: device removal. We don't support that. It
wasn't supported neither before this patch. Because the master device
was only set in .pre_probe(), if a device was removed master_dev was a
dangling pointer and transmitting a frame cause a panic. I don't see a
good solution without having some sort of notify machanism when a
udevice is removed.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> [DSA unit tests]
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Michael Walle
108157c468 net: dsa: remove NULL check for priv and platform data
Because the uclass has the "*_auto" properties set, the driver model
will take care of allocating the private structures for us and they
can't be NULL. Drop the checks.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Michael Walle
e5d7d11928 net: dsa: probe master device
DSA needs to have the master device probed first for MAC inheritance.
Until now, it only works by chance because the only user (LS1028A SoC)
will probe the master device first. The probe order is given by the PCI
device ordering, thus it works because the master device has a "smaller"
BDF then the switch device.

Explicitly probe the master device in dsa_port_probe().

Fixes: fc054d563b ("net: Introduce DSA class for Ethernet switches")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Michael Walle
a02dcbbb5a net: dsa: return early if there is no master
It doesn't make sense to have DSA without a master port. Error out early
if there is no master port.

Fixes: fc054d563b ("net: Introduce DSA class for Ethernet switches")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:42 +05:30
Rasmus Villemoes
bdf319273b mdio-uclass.c: support fixed-link subnodes
When trying to port our mpc8309-based board to DM_ETH, on top of
Heiko's patches, I found that nothing in mdio-uclass.c seems to
support the use of a fixed-link subnode of the ethernet DT node. That
is, the ethernet node looks like

		enet0: ethernet@2000 {
			device_type = "network";
			compatible = "ucc_geth";
			...
			fixed-link {
				reg = <0xffffffff>;
				speed = <100>;
				full-duplex;
			};

but the current code expects there to be phy-handle property. Adding
that, i.e.

			phy-handle = <&enet0phy>;
			enet0phy: fixed-link {

just makes the code break a few lines later since a fixed-link node
doesn't have a reg property. Ignoring the dtc complaint and adding a
dummy reg property, we of course hit "can't find MDIO bus for node
ethernet@2000" since indeed, the parent node of the phy node does not
represent an MDIO bus. So that's obviously the wrong path.

Now, in linux, it seems that the fixed link case is treated specially;
in the of_phy_get_and_connect() which roughly corresponds to
dm_eth_connect_phy_handle() we have

    if (of_phy_is_fixed_link(np)) {
        ret = of_phy_register_fixed_link(np);
        ...
    } else {
        phy_np = of_parse_phandle(np, "phy-handle", 0);
	...
    }

    phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);

And U-Boot's phy_connect() does have support for fixed-link
subnodes. Calling phy_connect() directly with NULL bus and a dummy
address does seem to make the ethernet work.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-02-21 18:46:41 -05:00
Ramon Fried
2dddc1bb29 net: tftp: Avoid sending extra ack on completion
in tftpboot, if ack was already sent previously for this
packet, don't send again.

Fixes: cc6b87ecaa ("net: tftp: Add client support for RFC 7440")

Reported-by: Suneel Garapati <suneelglinux@gmail.com>
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Suneel Garapati <suneelglinux@gmail.com>
Tested-by: Oliver Graute <oliver.graute@kococonnector.com>
2021-02-18 08:20:34 -05:00
Claudiu Manoil
fc054d563b net: Introduce DSA class for Ethernet switches
DSA stands for Distributed Switch Architecture and it covers switches that
are connected to the CPU through an Ethernet link and generally use frame
tags to pass information about the source/destination ports to/from CPU.
Front panel ports are presented as regular ethernet devices in U-Boot and
they are expected to support the typical networking commands.
DSA switches may be cascaded, DSA class code does not currently support
this.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-02-16 11:48:20 -05:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Simon Glass
177e7f9ce7 net: Use CONFIG_IS_ENABLED() in eth_dev_get_mac_address()
This function may be used in SPL where devicetree is not available.
Use the correct macro so that the function does not try to read it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-27 17:03:16 -05:00
Yang Liu
d9506cd41c net: fix ping in netconsole
Should not init eth device when doing ping in netconsole.

Signed-off-by: Yang Liu <yliu@cybertec.com.au>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2021-01-27 08:25:31 -05:00
Tom Rini
26e85bf77a Revert "net: eth-uclass: Change uclass driver name to ethernet"
This reverts commit 1231184caa.

While the change is fine in theory, a number of tests need to be updated
to match.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-19 15:35:00 -05:00
David Wu
1231184caa net: eth-uclass: Change uclass driver name to ethernet
dev_read_alias_seq() used uc_drv->name compared to alias
stem string, Ethernet's alias stem uses "ethernet", which
does not match the eth-uclass driver name "eth", can not
get the correct index of ethernet alias namer. So it seems
change uclass driver name to match the alias stem is a more
reasonable way.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-19 09:15:02 -05:00
Matthias Brugger
ea707dc0aa net: Use NDRNG device in srand_mac()
When calling srand_mac we use a weak seed dependent on the
mac address. If present, use a RNG device instead to incerase entropy.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
2021-01-19 09:15:02 -05:00
Jorge Ramirez-Ortiz
c1ab738145 net: eth_legacy - fix build CMD_PCAP
Fix typo which would cause a build error.

Fixes: 3eaac6307d ("net: introduce packet capture support")

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
2021-01-19 09:15:02 -05:00
Harm Berntsen
beb61e13b8 net: tftp: Fix incorrect tftp_next_ack on no OACK
When the tftp server did not send any OACK, the tftp_next_ack variable
was not set to the correct value . As the server was transmitting
blocks we generated a lot of 'Received unexpected block: $n, expected
$n+1' error messages. Depending on the timeout setting the transfer
could still complete though.

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
CC: Ramon Fried <rfried.dev@gmail.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2021-01-19 09:15:02 -05:00
David Rivshin
51723c5581 net: Do not respond to ICMP_ECHO_REQUEST if we do not have an IP address
While doing DHCP the interface IP is set to 0.0.0.0. This causes the
check in net.c on dst_ip to be effectively skipped, and all IP datagrams
are accepted up the IP stack. In the case of an ICMP_ECHO_REQUEST for the
matching MAC address (regardless of destination IP), the result is that
an ICMP_ECHO_REPLY is sent. The source address of the ICMP_ECHO_REPLY is
0.0.0.0, which is an illegal source address.

This can happen in common practice with the following sequence:
DHCP (U-Boot or OS) acquires IP address 10.0.0.1
System reboots
U-Boot starts DHCP and send DHCP DISCOVER
DHCP server decides to OFFER 10.0.0.1 again
  (perhaps because of existing lease or manual configuration)
DHCP server tries to PING 10.0.0.1 to see if anyone is squatting on it
DHCP server still has our MAC address in its ARP table for 10.0.0.1
U-Boot receives PING, and responds with an illegal source address
This may further result in a the DHCP server seeing the response as
  confirmation that someone is squatting on 10.0.0.1, and picking a
  new IP address from the pool to try again

Signed-off-by: David Rivshin <drivshin@allworx.com>
2021-01-19 09:15:02 -05:00
Matthias Schiffer
fa795f4525 net: eth-uclass: avoid running start() twice without stop()
Running the start() handler twice without a stop() inbetween completely
breaks communication for some ethernet drivers like fec_mxc.

eth_halt() is called before each eth_init(). Due to the switch to
eth_is_active() in commit 68acb51f44 ("net: Only call halt on a driver
that has been init'ed"), this is not sufficient anymore when netconsole
is active: eth_init_state_only()/eth_halt_state_only() manipulate the
state check that is performed by eth_is_active() without actually
calling into the driver.

The issue can be triggered by starting a network operation (e.g. ping or
tftp) while netconsole is active.

Add an additional "running" flag that reflects the actual state of the
driver and use it to ensure that eth_halt() actually stops the device as
it is supposed to.

Fixes: 68acb51f44 ("net: Only call halt on a driver that has been init'ed")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-01-19 09:06:15 -05:00
Heinrich Schuchardt
5f59518a7b efi_loader: setting boot device
Up to now the bootefi command used the last file loaded to determine the
boot partition. This has led to errors when the fdt had been loaded from
another partition after the EFI binary.

Before setting the boot device from a loaded file check if it is a PE-COFF
image or a FIT image.

For a PE-COFF image remember address and size, boot device and path.

For a FIT image remember boot device and path.

If the PE-COFF image is overwritten by loading another file, forget it.

Do not allow to start an image via bootefi which is not the last loaded
PE-COFF image.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-13 02:38:00 +01:00
Simon Glass
f10643cf8a dm: core: Access device ofnode through functions
At present ofnode is present in the device even if it is never used. With
of-platdata this field is not used, so can be removed. In preparation for
this, change the access to go through inline functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
Simon Glass
991759196f dm: Drop the unused arg in uclass_find_device_by_seq()
Now that there is only one sequence number (rather than both requested and
assigned ones) we can simplify this function. Also update its caller to
simplify the logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
552da3357b net: Update to use new sequence numbers
Checking for seq == -1 is effectively checking that the device is
activated. The new sequence numbers are never -1 for a bound device, so
update the check.

Also drop the note about valid sequence numbers so it is accurate with the
new approach.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
8b85dfc675 dm: Avoid accessing seq directly
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Heinrich Schuchardt
e1864db60d net: sntp: remove CONFIG_TIMESTAMP constraint
CONFIG_TIMESTAMP is not related to the RTC drivers. It does not make any
sense to let the updating of the RTC by the sntp command depend on it.

Drop the CONFIG_TIMESTAMP checks.

Furthermore function dm_rtc_set() is enabled by CONFIG_DM_RTC. There is no
reason to require CONFIG_CMD_DATE when using a driver model RTC. The UEFI
sub-system can consume the RTC functions even if there is not date command.

Only check CONFIG_CMD_DATE when using a non-driver model RTC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-01 14:12:28 -05:00
Lyle Franklin
c8e251f82a Adds basic support for ProxyDHCP
- ProxyDHCP allows a second DHCP server to exist alongside your main
  DHCP server and supply additional BOOTP related options
- When u-boot sends out a DHCP request, the real DHCP server will
  respond with a normal response containing the new client IP address
  while simultaneously the ProxyDHCP server will respond with a blank
  client IP address and a `bootfile` option
- This patch adds CONFIG_SERVERIP_FROM_PROXYDHCP (default false) to
  enable this behavior and CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS
  (default 100) which tells u-boot to wait additional time after
  receiving the main DHCP response to give the ProxyDHCP response time
  to arrive
- The PXE spec for ProxyDHCP is more complicated than the solution
  added here as diagramed on page 16:
  http://www.pix.net/software/pxeboot/archive/pxespec.pdf:

```
DHCP Discover will be retried four times. The four timeouts are 4, 8, 16
and 32 seconds respectively. If a DHCPOFFER is received without an Option
timeouts in an attempt to receive a PXE response.
```

- Adding a simple delay worked for my purposes but let me know if a
  more robust solution is required

Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
2020-12-01 10:33:37 -05:00
Patrick Wildt
36ea0cab26 net: add a define for the number of packets received as batch
With a define for the magic number of packets received as batch
we can make sure that the EFI network stack caches the same amount
of packets.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-19 22:59:53 +02:00
Sean Anderson
c3f0278e29 net: Expose some errors generated in net_init
net_init does not always succeed, and there is no existing mechanism to
discover errors. This patch allows callers of net_init (such as net_init)
to handle errors. The root issue is that eth_get_dev can fail, but
net_init_loop doesn't expose that. The ideal way to fix eth_get_dev would
be to return an error with ERR_PTR, but there are a lot of callers, and all
of them just check if it's NULL. Another approach would be to change the
signature to something like

int eth_get_dev(struct udevice **pdev)

but that would require rewriting all of the many callers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:50:12 -04:00
Philippe Reynes
912ece4c3d sntp: use udp framework
This commits update the support of sntp to use
the framework udp. This change allows to remove
all the reference to sntp in the main network
file net/net.c.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 16:55:03 -04:00
Philippe Reynes
b43ea1bf18 net: add a generic udp protocol
This commit adds a generic udp protocol framework in the
network loop. So protocol based on udp may be implemented
without modifying the network loop (for example custom
wait magic packet).

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 16:55:03 -04:00
Heinrich Schuchardt
ad8959138f net: use log_err() for 'No ethernet found' message
Write the 'No ethernet found' message via the log drivers. This allows
suppressing it during output via the syslog driver.

This fixes the problem reported in:

[PATCH 0/4] log: Fix the syslog spam when running tests
https://lists.denx.de/pipermail/u-boot/2020-September/426343.html

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 16:48:18 -04:00
Ley Foon Tan
f6a158b996 net: tftp: Fix load_block offset calculation
When load the last block, the "len" might not be a block size. This cause
loading the incorrect last block data.

The fix change "len" to tftp_block_size and minus one tftp_block_size
for offset calculation.

Use same offset calculation formula as in store_block().

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-09-30 16:48:18 -04:00
Ley Foon Tan
ae0bdf09ca net: tftp: Fix store_block offset calculation
tftp_cur_block start with 1 for first block, but tftp_cur_block counter is
start with zero when block number is rollover. The existing code
"tftp_cur_block - 1" will cause the block number become -1 in store_block()
when tftp_cur_block is 0 when tftp_cur_block is rollover.

The fix pass in tftp_cur_block to store_block() and minus the
tftp_block_size when do the offset calculation.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-09-30 16:48:18 -04:00
Ley Foon Tan
6bf46367f5 net: tftp: Fix tftp_prev_block counter update
Fixes missing update to tftp_prev_block counter before increase
tftp_cur_block counter when do the tftpput operation.

tftp_prev_block counter is used in update_block_number() function to
check whether block number (sequence number) is rollover. This bug
cause the tftpput command fail to upload a large file when block
number is greater than 16-bit (0xFFFF).

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-09-30 16:48:18 -04:00
Sean Anderson
0851bd1e75 net: mdio: Fix not calling dev_dbg with a device
The name of the device we are working on is `ethdev` and not just `dev`.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:06 -04:00
Roman Kovalivskyi
2b2a771b40 fastboot: Add support for 'reboot fastboot' command
Android 10 adds support for dynamic partitions and in order to support
this userspace fastboot must be used[1]. New tool fastbootd is
included into recovery.

Userspace fastboot works from recovery and is launched if:
1) - Dynamic partitioning is enabled
2) - Boot control block has 'boot-fastboot' value into command field
The bootloader is expected to load and boot into the recovery image
upon seeing boot-fastboot in the BCB command. Recovery then parses the
BCB message and switches to fastbootd mode[2].

Please note that boot script is expected to handle 'boot-fastboot'
command in BCB and load into recovery mode.

Bootloader must support 'reboot fastboot' command which should reboot
device into userspace fastboot to accomodate those changes[3].

Another command that bootloader must support[3] is 'reboot recovery'. This
command should simply reboot device into recovery mode.

[1] - https://source.android.com/devices/bootloader/fastbootd
[2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery
[3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76
2020-09-01 14:47:43 +02:00
Marek Szyprowski
def7a5c00f net: ping: reset stored IP address
Reset the stored ping IP address before entering a netloop with different
protocol to ensure that it won't be interrupted by the received
correct ICMP_ECHO_REPLY packet.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2020-08-04 23:30:02 -04:00
Ramon Fried
cc6b87ecaa net: tftp: Add client support for RFC 7440
Add support for RFC 7440: "TFTP Windowsize Option".

This optional feature allows the client and server
to negotiate a window size of consecutive blocks to send as an
alternative for replacing the single-block lockstep schema.

windowsize can be defined statically during compilation by
setting CONFIG_TFTP_WINDOWSIZE, or defined in runtime by
setting an environment variable: "tftpwindowsize"
If not defined, the windowsize is set to 1, meaning that it
behaves as it was never defined.

Choosing the appropriate windowsize depends on the specific
network topology, underlying NIC.
You should test various windowsize scenarios and see which
best work for you.

Setting a windowsize too big can actually decreases performance.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-08-04 23:30:02 -04:00
Simon Glass
2a64ada78c net: Drop dm.h header file from phy.h
This header file should not be included in other header files. Remove it
and use other headers and C inclusions instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Adam Ford
3275f26bb6 Convert CONFIG_BOOTP_SEND_HOSTNAME to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_SEND_HOSTNAME

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Andre Przywara
f1dd05bc34 net: dm: Remove warning about EEPROM provided MAC address
Similar to patch 821fec0ceb ("net: remove scary warning about EEPROM
provided MAC address") this removes the somewhat awkward "warning" on
boards using DM_ETH:
In many parts of the computing world having a unique MAC address
sitting in some on-NIC storage is considered the normal case.

If there is a properly provided MAC address (either from ROM or from DT),
remove the warning to not scare the user unnecessarily.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-07 18:23:48 -04:00
Baruch Siach
f1d925d9c3 net: move random_port() to dns
The random_port() routine is not used anywhere else. Make it local to
dns.c to reduce code clutter, and shrink generated code a little.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-06-12 13:17:23 -04:00
Ravik Hasija
0813921042 net: tftp: fix option validation as per RFCs
RFC2348, RFC2349:
- Option string is case in-sensitive.
- Client must generate ERR pkt in case option value mismatch in server OACK
- Fix debug print for options

Signed-off-by: Ravik Hasija <rahasij@linux.microsoft.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-06-12 13:17:23 -04:00
Ravik Hasija
de5468e660 net: tftp: fix progress marker for file transfer
During packet sequence number wraparound the show_block_marker() API was
not called, as a result the progress marker doesn't stay within column
boundary. Use position in file instead of sequence number to align the
marker.

Signed-off-by: Ravik Hasija <rahasij@linux.microsoft.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-06-12 13:17:23 -04:00
Krebs, Olaf
808f13d8fc net: Fix error if some network features are disabled
If 'CONFIG_CMD_TFTPBOOT' or 'CONFIG_CMD_BOOTP' are disabled, the usage must be disabled, too!

Signed-off-by: Olaf Krebs <olaf.krebs@emh-metering.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
2020-06-12 13:17:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00