Commit graph

266 commits

Author SHA1 Message Date
Michal Simek
e6a9ed04e7 ARM64: zynqmp: Add SPL support support
Support RAM and MMC boot mode in SPL also with SPL_FIT images.

In MMC boot mode two boot options are available:
1) Boot flow with ATF(EL3) and full U-Boot(EL2):
 aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
 mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000
 -d bl31.bin atf.ub
 cp spl/boot.bin <sdcard fat partition>
 cp atf.ub <sdcard fat partition>
 cp u-boot.bin <sdcard fat partition>

2) Boot flow with full U-Boot(EL3):
 cp spl/boot.bin <sdcard>
 cp u-boot*.img <sdcard>

3) emmc boot mode
 dd if=/dev/zero of=sd.img bs=1024 count=1024
 parted sd.img mktable msdos
 parted sd.img mkpart p fat32 0% 100%
 kpartx -a sd.img
 mkfs.vfat /dev/mapper/loop0p1
 mount /dev/mapper/loop0p1 /mnt/
 cp spl/boot.bin /mnt
 cp u-boot.img /mnt
 cp u-boot.bin /mnt
 cp atf.ub /mnt
 umount /dev/mapper/loop0p1
 kpartx -d sd.img
 cp sd.img /tftpboot/

 and program it via u-boot
 tftpb 10000 sd.img
 mmcinfo
 mmc write 10000 0 $filesize
 mmc rescan
 mmc part
 ls mmc 0

psu_init() function contains low level SoC setup generated for every HW
design by Xilinx design tools. xil_io.h is only supporting file to fix
all dependencies from tools. The same solution was used on Xilinx Zynq.

The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which
stays at the same location all the time.
Bootrom expects starting address to be at 0xfffc0000 that's why this
address is SPL_TEXT_BASE.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Peter Griffin
cd593ed699 ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Currently only the serial pl01x driver is using DT,
and the other drivers still use platform data but
as more DT lands in the upstream kernel the aim is
to migrate the other drivers over to DT as well to
have a fully DT configured hikey u-boot.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:10:34 -04:00
Tom Rini
541c9be880 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-04-13 12:53:11 -04:00
Siva Durga Prasad Paladugu
2978ae23fa gpio: Kconfig: Enable Zynq GPIO driver using kconfig
Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board
config file.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Michal Simek
885581a56b ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
There are mini configurations which need to be fit to OCM that's why
these options shouldn't be enabled by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Hans de Goede
88bb800ddf sunxi: Enable CMD_GPIO on all sunxi boards
We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
its Kconfig conversion it has ended up missing on some recently
added boards.

Simply select it for ARCH_SUNXI, so that we get it on all
sunxi boards for both a consistent user experience and simpler
defconfig files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12 08:58:03 +02:00
Stefan Roese
606576d54b arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
This patch adds basic support for the Marvell A375 eval board. Tested
are the following interfaces:
- I2C
- SPI
- SPI NOR
- Ethernet (mvpp2), port 0 & 1

Currently the A375 SerDes and DDR3 init code is not intergrated. So
the SPL U-Boot is not fully functional.

Right now, this A375 mainline U-Boot can only be used by chainloading
it via the original Marvell U-Boot. This can be done via this
command:

=> tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-04-04 11:22:10 +02:00
Mateusz Kulikowski
085921368b arm: Add support for Qualcomm Snapdragon family
First supported chip is APQ8016 (that is compatible with MSM8916).
Drivers in SoC code:
- Reset controller (PSHOLD)
- Clock controller (very simple clock configuration for MMC and UART)

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:26 -04:00
Alexander Graf
8434f03576 sunxi: Depend SPL configs on SUPPORT_SPL
We currently depend SPL config options on specific machine types which doesn't
scale. Fortunately there's already a kconfig variable that tells us whether we
want to build SPL code at all, so just depend them on this.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:28 +02:00
Lokesh Vutla
37217f0e0a ARM: asm: types: Introduce DMA_ADDR_T_64BIT
dma_addr_t holds any valid DMA address. If the DMA API only uses 32-bit
addresses, dma_addr_t need only be 32 bits wide.  Bus addresses, e.g., PCI BARs,
may be wider than 32 bits, but drivers do memory-mapped I/O to ioremapped
kernel virtual addresses, so they don't care about the size of the actual
bus addresses.
Also 32 bit ARM systems with LPAE enabled can use 64bit address space, but
DMA still use 32bit address like in case of DRA7 and Keystone platforms.

This is inspired from the Linux kernel types implementation[1]

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/include/linux/types.h#n142

Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27 09:13:03 -04:00
Vasily Khoruzhick
f19eb15426 zipitz2: restore board support
zipitz2 was dropped in 49d8899ba9

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27 09:12:55 -04:00
Hans de Goede
d75111a79b sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig
Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
all our defconfigs. This also fixes it missing from some recently
added defconfigs.

This commit also modifies our ft_board_setup() to not cause warnings
when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
build it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Tom Rini
534bc70e35 ARM: keystone2: Switch to using the poweroff command
Now that we have a standard way to power off the hardware, switch to
using that rather than our own command.

Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-16 15:03:32 -04:00
Nishanth Menon
5f8bb93b23 ti: AM437x: Use generic EEPROM detection logic
Now that we have a generic TI eeprom logic which can be reused across
platforms, reuse the same.

This revision also includes fixes identified by Dave Gerlach
<d-gerlach@ti.com>

Cc: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:34 -04:00
Nishanth Menon
770e68c0a3 ti: AM335x: Use generic EEPROM detection logic
Use the generic EEPROM detection logic instead of duplicating the AM
eeprom logic.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:33 -04:00
Masahiro Yamada
fe5ea57bdb ARM: uniphier: prepare directory structure for ARMv8 SoC support
Before adding ARMv8 support, this commit refactors the directory
structure.  Move ARMv7 specific files to arch/arm/mach-uniphier/arm32
to avoid a mess by mixture of ARMv7 and ARMv8 code.  Also move the
"select CPU_V7" to the lower-level menu because we will have to
select ARM64 instead of CPU_V7 for ARMv8 SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-01 00:33:24 +09:00
Masahiro Yamada
4aceb3f8d4 ARM: uniphier: enable UniPhier SD/MMC host driver
Enable the driver in all UniPhier defconfig files and add some
needed defines to the common files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
b800cbde4f ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
This allows to use the "gpio" command.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
48264d9beb clk: uniphier: add Media I/O clock driver for UniPhier SoCs
This is the initial commit for the UniPhier clock drivers.
Currently, only the Media I/O clock is supported.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:13 +09:00
Michal Simek
eb04ab3492 ARM: zynq: Do not select options if SPL is not enabled
Zynq setups some default options for SPL but not all targets are
enabling SPL.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Vikas Manocha
0a61ee880c stm32: move stm32 specific code to mach-stm32
This patch moves stm32 sources at one place, with this armv7m now contains
only generic stuff.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-01-20 10:19:41 -05:00
Sergey Temerkhanov
746f985add armv8: cavium: Add ThunderX 88xx board definition
This commit adds basic Cavium ThunderX 88xx board definitions and support.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
[trini: Drop CONFIG_SYS_GENERIC_BOARD define]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 22:25:56 +00:00
Tom Rini
f46c25583a Merge git://www.denx.de/git/u-boot-marvell
Conflicts:
	arch/arm/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-14 11:23:05 -05:00
Stefan Roese
b322c83aa4 arm: mvebu: Consolidate board Kconfig options into one file
Merging all the board specific Kconfig options into the main Kconfig file
for mach-mvebu makes things easier to maintain.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Stefan Roese
0299c90f39 arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
This patch adds basic support for the SolidRun ClearFog Armada 38x based
board to mainline U-Boot. Supported interfaces / devices are:
- DDR3
- UART
- MMC
- Ethernet port 0 (connected to dedicated PHY)
- I2C

The included DT source was taken from Russell King's ftp server:
http://www.home.arm.linux.org.uk/~rmk/clearfog/

With only minor modifications, like the addition of some aliases and the
"u-boot,dm-pre-reloc" property.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Stefan Roese
e3b9c98a23 net: mvneta: Convert to driver model
Update this driver to support driver model. As all MVEBU boards using
this driver are converted with this patch, the non-driver-model code
can be removed completely. This is also the reason why this patch
is quite big and includes a) the driver change and b) the
platform change. As its not git-bisect save otherwise.

With this conversion, some parameters are now extracted from the
DT instread of using the config header defines. The supported
properties right now are:

PHY-mode ("phy-mode") and PHY-address ("reg").

The base addresses for the ethernet controllers can be removed from
the header files as well.

Please note that this patch also removes the E1000 network driver
from some MVEBU config headers. This is necessary, as with DM_ETH
configured and the e1000 driver enabled, the PCI driver also needs
to support DM. But the MVEBU PCI(e) driver still needs to get
ported to DM. When this is done, the E1000 driver can be enabled
again.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
2016-01-14 14:08:59 +01:00
Stefan Roese
09a54c009e arm: mvebu: Add SPI driver model support
This patch enables the DM support for the SPI driver and the
SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so
adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed
here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
2016-01-14 14:08:59 +01:00
Stefan Roese
6451223a8d arm: mvebu: Add DM and OF_CONTROL support to SPL
This patch adds full DM support to the SPL on MVEBU. Currently
only serial is supported. Other drivers will follow.

This patch also adds the necessary config values for the DEBUG UART
to the MVEBU defconfig files. This came in handy while implementing
this DM support.

Additionally, the mvebu specific SPL linker script is removed and
this common one is used instead:

   arch/arm/cpu/u-boot-spl.lds

This common linker script already handles all special cases. No need
to reinvent the wheel for MVEBU here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
2016-01-14 14:08:59 +01:00
Nathan Rossi
47c0d79edc arm: mvebu: Select SPL_DM_SEQ_ALIAS
Select SPL_DM_SEQ_ALIAS which is required for certain uclasses,
specifically SPI Flash.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 13:20:03 +01:00
Hans de Goede
211d57a45f sunxi: Select DM_KEYBOARD
We need to select DM_KEYBOARD now that the usb-kbd code has been converted
to this, otherwise usb keyboards do not work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-21 20:37:52 +01:00
Kamil Lulko
665624149a stm32: Convert serial driver to DM
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-12 15:56:08 -05:00
Hans de Goede
6edf6a2179 sunxi: select SYS_NS16550 from Kconfig
Select SYS_NS16550 from Kconfig instead of setting it in all our
defconfig files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-10 15:45:48 +01:00
Michal Simek
d9ae52c8f0 zynq: sdhci: Move driver to DM
Move driver to DM

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:29 +01:00
Michal Simek
6889ca7198 net: gem: Move driver to DM
- Enable DM_ETH by default for Zynq and ZynqMP
- Remove board_eth_init code
- Change miiphy_read function to return value instead of error code
  based on DM requirement
- Do not enable EMIO DT support by default

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-07 10:14:22 +01:00
Tom Rini
1670c8c219 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2015-11-30 15:18:30 -05:00
Shaohui Xie
02b5d2ed86 armv8/ls1043aqds: add LS1043AQDS board support
LS1043AQDS Specification:
-------------------------
Memory subsystem:
 * 2GByte DDR4 DIMM
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 16 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * Two RGMII ports
 * XFI 10G port
 * SGMII
 * QSGMII with 4x 1G ports

PCIe: supports Gen 1 and Gen 2

SATA 3.0: one SATA 3.0 port

USB 3.0: two micro AB connector and one type A connector

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
[York Sun: Add CONFIG_SYS_NS16550=y in defconfig]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 09:11:10 -08:00
Prabhakar Kushwaha
449372148f armv8: LS2080A: Rename LS2085A to reflect LS2080A
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-30 08:53:04 -08:00
Minkyu Kang
225f5eeccd arm: s5pc1xx: move SoC to mach-s5pc1xx
move arm/arm/cpu/armv7/s5pc1xx to arch/arm/mach-s5pc1xx

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-30 17:17:01 +09:00
Simon Glass
1fa4bfde18 dm: cros_ec: Convert cros_ec keyboard driver to driver model
Adjust the cros_ec keyboard driver to support driver model. Make this the
default for all Exynos boards so that those that use a keyboard will build
correctly with this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:40 -07:00
Albert ARIBAUD
62e92077a8 arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
When building a Thumb-1-only target with CONFIG_SYS_THUMB_BUILD,
some files fail to build, most of the time because they include
mcr instructions, which only exist for Thumb-2.

This patch introduces a Kconfig option CONFIG_THUMB2 and uses
it to select between Thumb-2 and ARM mode for the aforementioned
files.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-10 15:03:48 +01:00
Simon Glass
42800ffa79 arm: zynq: Move serial driver to driver model
Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Michal Simek
c2490bf546 ARM: zynqmp: Enable DM and OF binding
SPI requires DM and OF that's why enable DM for ZynqMP
and start to use configuration based on embedded OF.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-04 14:49:53 +01:00
Simon Glass
71556fbcbf dm: arm: zynq: Enable device tree control in SPL
Move to using device tree control in SPL so that we can use the same driver
code in both SPL and U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Hou Zhiqiang
831c068fcf armv8/ls1043a: Enable secondary cores
After the secondary cores enter U-Boot, use CONFIG_ARMV8_MULTIENTRY to
make secondary cores excute in spin loop.

Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:02 -07:00
Gong Qianyu
3ad4472923 armv8/ls1043ardb: Add nand boot support
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:01 -07:00
Mingkai Hu
f3a8e2b7d4 armv8/ls1043ardb: Add LS1043ARDB board support
LS1043ARDB Specification:
-------------------------
Memory subsystem:
 * 2GByte DDR4 SDRAM (32bit bus)
 * 128 Mbyte NOR flash single-chip memory
 * 512 Mbyte NAND flash
 * 16 Mbyte high-speed SPI flash
 * SD connector to interface with the SD memory card

Ethernet:
 * XFI 10G port
 * QSGMII with 4x 1G ports
 * Two RGMII ports

PCIe:
 * PCIe2 (Lanes C) to mini-PCIe slot
 * PCIe3 (Lanes D) to PCIe slot

USB 3.0: two super speed USB 3.0 type A ports

UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
2015-10-29 10:34:01 -07:00
Tom Rini
e8d124fae0 Merge git://git.denx.de/u-boot-marvell 2015-10-20 21:59:40 -04:00
Stefan Roese
1d51ea1913 arm: mvebu: Enable DM_SERIAL on AXP / A38x boards
This patch enables DM_SERIAL for all ARCH_MVEBU boards (AXP & A38x).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-21 02:25:01 +02:00
Stefan Roese
9cffb2335c arm: mvebu: Add DM (driver model) support
This patch adds driver model support for some Marvell MVEBU SoC's. Including
Armada XP and 38x. All 3 currently mainlined boards are converted. DM is now
selected automatically for MVEBU platforms.

With this DM support now available for MVEBU, hardcoding the base addresses
and other information is not necessary any more. Probing should be done
by using the values provided via the device tree now instead. For this
the driver also need to be converted to DM. Patches for some of the drivers
will follow.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-21 02:25:01 +02:00
Hans de Goede
6d0bdfdde5 sunxi: Switch to using malloc_simple for the spl
common/dlmalloc.c is quite big, both in .text and .data usage. E.g. for a
Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94 bytes,
and .data from 0x54c to 0x144 bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-20 18:40:27 +02:00