Commit graph

113 commits

Author SHA1 Message Date
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Tim Harvey
34b080b79c imx: ventana: add fdt fixup to enable UHS-I support on selected boards
UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. For backwards compatibility to not break users
who have old bootloaders and newer kernels the device-tree on boards with
microSD disables UHS-I support by default by defining the no-1-8-v property
in the esdhc controller node. For models/revisions that support switchable
1.8V/3.3V I/O which is detectable by the presence of a pull-down on the
SD3_VSELECT pin we remove that property to enable support in the kernel.

Additionally we add SD3_VSELECT to the pinmux for clarity (even though U-Boot
does not currently support UHS-I modes requiring 1.8V I/O).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:27 +02:00
Tim Harvey
385575bcb6 imx: ventana: add GW553x support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:12 +02:00
Tim Harvey
fe63fcb6ca imx: ventana: remove several EEPROM config bit dependence
Removed several EEPROM bit dependencies:
 - for dt aliases that don't exist and thus don't ever do anything
   (pcie,lvds1,uart*,vpu,csi*,hdmi_in,hdmi_out,cvbs_in,cvbs_out,gps)
 - for features that don't effect bus ordering or have no detrimental affect
   if erroneously enabled when not present (ahci,nand,i2c*)
 - for features that have little to no impact on being erroneously enabled
   but high impact if erroneously disabled (can*, spi*)
 - for features that have an high adverse affect of not being set when they
   should and no adverse affect of being set when they
   shouldn't (ipu*).

Removing these means the following:
 - these no longer are supported with the econfig command
 - these no longer affect the device-tree in any way

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:26:00 +02:00
Tim Harvey
5c55572ff7 imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
The MSATA feature is a board-specific feature on Gateworks Ventana boards.

In most cases a 2:1 mux will steer either PCIe or SATA to a miniPCIe socket
through an MSATA_EN gpio. In these such cases assign the gpio in the board
specific struct and use its presence to determine if we default the GPIO to
PCIe and if we later steer it according to hwconfig.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:47 +02:00
Tim Harvey
f17a9af846 imx: ventana: enable pwm device-tree property based on hwconfig
Most Ventana boards have a connector with off-board digital-I/O signals
including some that can be pinmuxed as either a PWM or a GPIO. The hwconfig
env variable is used to configure these and they will be pinmuxed according
to this configuration in the bootloader.

This patch adds a device-tree fixup that will enable the pwm controller
nodes appropriately for digital-I/O's that are configured as pwm via hwconfig
so that the pin can be used with the Linux kernel /sys/class/pwm API.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:31 +02:00
Tim Harvey
83e00f193e imx: ventana: fix invalid dio configuration for pwm mode
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:16 +02:00
Tim Harvey
7853262330 imx: ventana: export backlight gpio after gpio driver is available
Calling request_gpio to register bklt_gpio with the GPIO driver had no effect
in setup_display called from early board init (although pinmuxing it and
configuring it as output-low does do what it should). Therefore move the
request_gpio later in enable_lvds so that its registered for use by the
gpio command if LVDS is actually enabled.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:25:02 +02:00
Tim Harvey
ca628b74c9 imx: ventana: gsc: show board temp on boot
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:46 +02:00
Tim Harvey
82a17e75da imx: ventana: gsc: fix negative temperature readings
The GSC Temperature sensor is a 2's complement value - adjust accordingly
for negative temperatures.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:30 +02:00
Tim Harvey
efa7ed7236 imx: ventana: gsc: add gsc sleep command
The Gateworks System Controller on Ventana boards has the ability to
disable the board's primary power supply until the RTC hits a specific
time. When sleeping a button-down event on the GSC user pushbutton will
wake the board before it's wake time has been reached. This feature is
referred to as GSC sleep.

Add a command to invoke sleep mode for a specified number of seconds.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:15 +02:00
Tim Harvey
6052b1c6f4 imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM config
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:24:00 +02:00
Tim Harvey
1b99103fba imx: ventana: SPL: only disable boot watchdog if Falcon mode
If not booting Falcon mode, leave the boot watchdog enabled as a work-around
for other non-resolved bootloader hangs.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:23:46 +02:00
Robert P. J. Day
7ffe3cd62e Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT:

  config OF_BOARD_SETUP
          bool "Set up board-specific details in device tree before boot"
          depends on OF_LIBFDT
          ...

remove superfluous tests of CONFIG_OF_LIBFDT when testing for
CONFIG_OF_BOARD_SETUP.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
[trini: Typo fix: s/ifdefi/ifdef/]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:16 -04:00
Tim Harvey
3c0fd17f61 imx: ventana: use EEPROM register for falcon boot mode
NAND+MMC env support costs 12KB in the SPL which is fairly expensive just
for the ability to specify whether or not to boot to uboot or directly
to linux. The Ventana boards have plenty of EEPROM storage so we will use
a byte there to signify if we should boot to the bootloader or to the OS.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
a419352daf imx: ventana: gsc: remove dependence on env
remove dependence on getenv() by using global board info struct for model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Marek Vasut
18e02ffe5e arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
The following patch changed the PFUZE100 swbst register bit definitions
and broke PMIC configuration on multiple boards, at least on the novena
and gw_ventana. This patch fixes it.

commit 8fa46350a4
Author: Peng Fan <Peng.Fan@freescale.com>
Date:   Fri Aug 7 16:43:45 2015 +0800

    power: regulator: add pfuze100 support

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-12-01 16:09:51 +01:00
Fabio Estevam
346d106d16 gw_ventana: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-11-12 17:26:34 +01:00
Peng Fan
f20562e4c4 mx6: remove SYS_SOC from board Kconfig
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-09-13 10:37:29 +02:00
Peng Fan
f2ff834365 imx: mx6: ddr init MMDC according to ddr_type
To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:34:12 +02:00
Tim Harvey
c2fd3f5704 imx: ventana: skip mtdparts fixup if no flash
This avoids an error message on NAND-less boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
fdead4be6a imx: ventana: hang if board model could not be determined
If the EEPROM could not be read or is corrupt we always want to hang.
Note that an error message will have been displayed by read_eeprom in this
case.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
80d1a3ee72 imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable
The fdt_file1 and fdt_file2 vars provide fallbacks for the fdt file loading
script. There is no need to allow the user to override these as if they
want to specify the fdt, they should do so in the first attempt which is
the fdt_file var.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
40c746758c imx: ventana: make model env var automatic and non-overridable
We want to model env var to always reflect what was in the EEPROM. There
is no point in allowing a user to override this.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
9a83a81545 imx: ventana: various board-specific GPIO config updates
- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is
  done regardless of USB being initialized in bootloader
- Added usb_sel iomux/hwconfig for GW552x
- Fixed mezzanine DIO for GW54xx
- Fixed PANLEDR# for GW54xx
- Fixed dio iomux/hwconfig for GW552x
- Fixed dio iomux for GW551x
- removed redundant #define

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
6122f0d556 imx: ventana: update README with Falcon mode documentation
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:24:18 +02:00
Tim Harvey
40e999ca71 imx: ventana: update README for micro-SD boot medium
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:21:35 +02:00
Tim Harvey
53940a5079 imx: ventana: config: enable Falcon mode
Falcon mode entails the SPL booting the OS directly instead of U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-21 19:07:17 +02:00
Tim Harvey
e06a03625d imx: ventana: add pmic_setup to SPL
We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:04:44 +02:00
Tim Harvey
af1db4a390 imx: ventana: use stack relocation
Certain features we desire require a larger stack than is available by using
iRAM (most notably for us, env_mmc). Relocate the stack to DRAM so that
we can use these features.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-15 19:25:07 +02:00
Tim Harvey
ea7a3c446b imx: ventana: add GSC boot watchdog disable to SPL
If the SPL is to be used for Falcon mode then we need to make sure the SPL
disable the GSC boot watchdog.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
c4b44d7699 imx: ventana: add gpio setup to SPL
If the SPL is to be used for Falcon mode then we need to make sure it
configures basic GPIO (iomux, padconf, and default output levels).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
2089b7be2b imx: ventana: use common uart and i2c setup functions in SPL
Now that uart and i2c setup functions have been moved to common.c we can
use these and remove code duplication.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
6d38f3a85d imx: ventana: detect pmic using i2c probe instead of board model
Avoid requiring board-model and probe pmic by its i2c address.
This is in preparation for being able to call pmic_setup() from SPL
and not need board type.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
2d833c8528 imx: ventana: move GSC boot watchdog disable function to gsc.c
Move the code that disables the GSC boot watchdog into gsc.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
e56c5791af imx: ventana: split out common functions between SPL and uboot
Move shared functions used by both SPL and U-Boot to common.c:
 - setup_iomux_uart() and uart pad config
 - gpio pad config

In the process also moved the following to common.c in preparation for
calling it from the SPL:
 - split i2c setup into a shared function
 - move pmic init to setup_pmic() function to call directly from
   power_init_board()
 - split gpio setup into early (iomux and default pin config)
   and late (output configuration based on env)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
77c5501893 imx: ventana: default msata/pci mux to pci before PCI enumeration
PCI enumeration occurs early, before we fully configure our GPIO's. Make
sure we steer the MSATA/PCI mux to PCI in board_init to ensure PCI is
selected before enumeration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
9ec3c8d4b0 imx: ventana: fix pcie reset for GW522x
The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before
the PCI subsystem calls the toggle funciton.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
d41c8c8ece imx: ventana: enable DM_SERIAL
mxc_serial supports DM so lets use it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
def6031533 imx: ventana: register gpio's with gpio_request
Prior to using a gpio a call to gpio_request() should be called to register
it with the gpio subsystem.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
06c3564d5f imx: ventana: display SPL boot device
Display what device the SPL will fetch uboot.img from

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:24 +02:00
Tim Harvey
d783c2744f imx: ventana: fix boot to SD
This fixes a regression caused by e25fbe3fe5
(gw_ventana: Move the DCD settings to spl code)

The clock gating must be setup prior to calling arch_cpu_init(). Without this
booting to SD (directly via eFuse or via bmode) will hang.

Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-05-15 19:20:48 +02:00
Pushpal Sidhu
9e2b0c2d72 imx: ventana: Update missing memory/calib handling
This commit combines catching missing memory and calibration data into
one if() block. It further prints pertinent information in determining
why the failure occurred.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Pushpal Sidhu
767d88b037 imx: ventana: Add new memory configuration
Add memory configuration for an IMX6SDL + 1GB density DRAM.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
18b3a91a8f imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A
The initial revision of the GW551x does not connect enough signals between
the HDMI receiver and the IMX6 CSI for 16bit capture mode necessary for
yuv422smp capture. Future revisions will, but for the initial rev force it
to yuv422bt656 mode which requires an 8bit video data bus.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
a2559f113c imx: ventana: use hdmiinfmt env var to override HDMI capture format
The HDMI receiver used on the GW54xx and GW551x has a 16bit video data bus
interconnect between it and the IMX6 CSI. This can be used in two different
modes, each having advantages and disadvantages. Allow the hdmiinfmt env
var to specify which format is desired (yuv422smp or yuv422bt656).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Pushpal Sidhu
e9fc6d137b imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO
The GW522x is functionally the same as a GW52xx except for PCIE_RST#
GPIO. Add a DT fixup to change this gpio upon bootup.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
ee5931d488 imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog
This adds information about the Gateworks System Controller to the gsc command
such as the firmware version, firmware CRC and status of the GSC watchdog
(if its enabled and if its tripped).

Additionally the 'gsc wd' command can be used to enable or disable the
watchdog with the following usage:
 gsc wd enable [30|60]
 gsc wd disable

Note that the GSC registers are battery-backed by the GSC coincell so once
eanbled, they remain enabled across power-cycles or until either the GSC
firmware has been updated or FLASH has been re-programmed by the Gateworks
JTAG adapter.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
4569cd561d imx: ventana: added device-tree display configuration for LVDS displays
Configure kernel device-tree for display from env var. This is useful
to specify the display present when the device-tree supports multiple
non-detectable display configurations.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00