This does not work at present, since the current algorithm assumes that
either there are no nodes or all nodes have an offset. If a node is new,
but an old node is still in the tree, then syncing fails due to this
assumption.
Fix it and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present if we see 'ranges' property (with no value) we assume it is a
boolean, as per the devicetree spec.
But another node may define 'ranges' with a value, forcing us to widen it
to an int array. At present this is not supported and causes an error.
Fix this and add some test cases.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
An int array can hold a single int so we should not need to do anything
in the widening operation. However due to a quirk in the code, an int[3]
widened with an int produced an int[4]. Fix this and add a test.
Fix a comment typo while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
The current name is confusing because the logic is actually backwards from
what you might expect. Rename it to needs_widening() and update the
comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a few more internal checks to make sure offsets are correct, before
updating the dtb.
To make this easier, update the functions which add a property to return
that property,.
Signed-off-by: Simon Glass <sjg@chromium.org>
So far we have only needed to add subnodes to empty notds, so have not
had to deal with ordering. However this feature is needed for binman's
expanded nodes, since there may be another node in the same section.
While libfdt adds new properties after existing properties, it adds new
subnodes before existing subnodes. This means that we must reorder the
nodes in the cached version, so that the ordering remains consistent.
Update the sync implementation to sync existing subnodes first, then
add new ones, then tidy up the ordering in the cached version. Update the
test to cover this behaviour.
Also improve the comment about property syncing while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Once the tree has been synced, thus potentially moving things around in the
fdt, we set _cached_offsets to False so that a refresh will happen next
time a property is accessed.
This 'lazy' refresh doesn't really save much time, since refresh is a very
fast operation, just a single walk of the tree. Also, having the refresh
happen in the bowels of property access it makes it harder to figure out
what is going on.
Simplify the code by always doing a refresh before and after a sync. Set
_cached_offsets to True immediately after this, in the Refresh() function,
since this makes more sense than doing it in the caller.
Signed-off-by: Simon Glass <sjg@chromium.org>
If a property does not yet have an offset, then that means it exists in
the cache'd fdt but has not yet been synced back to the flat tree. Use
the dirty flag for this so we don't need to check the offset too. Improve
the comments for Prop and Node to make it clear what an offset of None
means.
Also clear the dirty flag after the property is synced.
Signed-off-by: Simon Glass <sjg@chromium.org>
When packing files it is sometimes useful to align the start of each file,
e.g. if the flash driver can only access 32-bit-aligned data. Provides a
new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful anymore, since we always want to call chr() in Python 3.
Drop it and adjust callers to use chr().
Also drop ToChars() which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use an Enum instead of the current ad-hoc constants, so that there is a
data type associated with each 'type' value.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present an integer is converted to bytes incorrectly. The whole 32-bit
integer is inserted as the first element of the byte array, and the other
three bytes are skipped. This was not noticed because the unit test did
not check it, and the functional test was checking for wrong values.
Update the code to handle this as a special case. Add one more test to
cover all code paths.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a method for adding a property containing arbitrary bytes. Make sure
that the tree can expand as needed in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a method for adding a property containing arbitrary bytes. Make sure
that the tree can expand as needed in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present patman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.
Move patman to use absolute imports. This requires changes in tools which
use the patman libraries (which is most of them).
Signed-off-by: Simon Glass <sjg@chromium.org>
Since the state module holds references to all the device trees used by
binman, it must be updated when the device trees are updated. Add support
for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function currently fails if the root node is requested. Requesting
the root node is sometimes useful, so fix the bug.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is confusing when something goes wrong with a device tree which was
created from data rather than a file, since there is no identifying
filename. Add an option to provide this. Use the filename as the name,
where available
Signed-off-by: Simon Glass <sjg@chromium.org>
At present a Python exception is raised which does not show the node
information. Add a more helpful exception in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update this class to work correctly on Python 3 and to pass its unit
tests. The only required change is to deal with a difference in the
behaviour of sorting with a None value.
Signed-off-by: Simon Glass <sjg@chromium.org>
In Python 3 bytes and str are separate types. Use bytes to ensure that
the code functions correctly with Python 3.
Signed-off-by: Simon Glass <sjg@chromium.org>
The difference between the bytes and str types in Python 3 requires a
number of minor changes to this function. Update it to handle the input
data using the 'bytes' type. Create two useful helper functions which can
be used by other modules too.
Signed-off-by: Simon Glass <sjg@chromium.org>
This method does not actually use any members of the Prop class. Move it
out of the class so that it is easier to add unit tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a few more functions which allow creating and modifying property
values. If only we could do this so easily in the real world.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we require the caller to manually update the device tree using
individual calls to libfdt functions. This is not ideal. It would be
better if we could make changes using the Python structure and then call a
Sync() function to write them back.
Add this feature to the Fdt class. Update binman and the tests to match.
Signed-off-by: Simon Glass <sjg@chromium.org>
The enhanced pylibfdt support in U-Boot needed for binman was a
placeholder while upstreaming of this work continued. This is now
complete, so bring in the changes and update the tools as needed.
There are quite a few changes since we decided to split the
implementation into three fdt classes instead of two.
The Fdt.del_node() method was unfortunately missed in this process and
will be dealt with later. It exists in U-Boot but not upstream.
Further syncing of libfdt probably needs to wait until we assess the
code-size impact of all the new checking code on SPL and possibly provide
a way to disable it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a function which can decode a property containing a list of phandles.
This is useful for finding nodes linked to a property. Also provide a way
to look up a single phandle and get the Fdt object from a Node.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the algortihm is not correct since it will return the root node
if the requested node is not found and there are no slashes in the
requested node name. Fix this and add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the Fdt class does not keep track of property offsets if they
change due to removal of properties. Update the code to handle this, and
add a test.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present only some of the fdt functionality is tested. Add more tests to
cover the rest of it. Also turn on test coverage, which is now 100% with
a small exclusion for a Python 3 feature.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the Fdt class has its own copy of the device tree. This is
confusing an unnecessary now that pylibfdt has its own. Drop it and
provide access functions to the buffer.
This allows us to move the rest of the implementation to use pylibfdt
methods instead of directly calling libfdt stubs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that pylibfdt supports a fuller API we don't need to directly call
the libfdt stubs. Update the code to use the Fdt methods instead.
Some other cases remain which will be tidied up in a later commit, since
they need larger changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this module is tested via the dtoc tests. This is a bit painful
since the tests are at a higher level and so failures are more difficult
to diagnose.
Add some tests that exercise the fdt module directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
