Commit graph

93 commits

Author SHA1 Message Date
Christian Hewitt
506fd30740 doc: boards: amlogic: update for Radxa Zero
Add documentation bits for the Radxa Zero

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: updated u200 MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:46 +02:00
Christian Hewitt
e294f64b71 boards: amlogic: add Radxa Zero defconfig
Add a defconfig for the Radxa Zero SBC, using an Amlogic S905Y2 chip.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: updated u200 MAINTAINERS & add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:46 +02:00
Vyacheslav Bocharov
de19baef68 ARM: amlogic: add JetHub D1/H1 device support
Add support for new home automation devices.

JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting case
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB DDR3
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE

JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- Square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB DDR3
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB with serial console

Patches from:
- JetHub H1
  https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in
  https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607
- JetHub D1
  https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in
  https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed unused variable value]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
fe8b4c1080 ARM: amlogic: add Banana Pi M5
Banana Pi BPI-M5 is a credit card format SBC with the following features:
- Amlogic S905X3 quad core Cortex-A55
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
- 2x LEDS
- SDCard
- 2.5mm Jack with Stereo Audio + CVBS
- Infrared Received
- ADC Button
- GPIO Button
- 40 pins header + 3pins debug header

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
2c9269b14b ARM: meson: add Beelink GS-King X board
The Beelink GS-King X is a variant of the GS King boards but with an internal
USB to SATA bridge and advanced audio features.

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:32 +02:00
Neil Armstrong
a4b553e31b ARM: amlogic: add support for Odroid-HC4 device
The Odroid-HC4 is a variant of the Odroid-C4 board but with a PCIe-SATA bridge
instead of the USB3 ports.

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:28 +02:00
Tom Rini
aba3fa1d3f - odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
 - use Android BCB mechanism for reboot reason instead of HW reboot flag
 - Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmESPjcACgkQd9zb2sjI
 SdFabg/+K/5kH01N6etPpPgNH3DTns3Z7Uv16rawGaFJVj4V2O/Ak2vmhvjJA4df
 KvLJL3AVolMOfD4xTABRDyLKt3maCgIYkamdBWBV/xKCTKL7fvvqj8V1U5iUsGKm
 Wl2KbbDj+dGNF+IYO9V4T1D/JaRjAUk4YeztFEDaNdP3P1N+01v2FyfkadBL5un3
 dqwHb3DMNS2SyjnE3glTAs3g/+3nmrHhAHiVVZQlJHsijuup6f93e8huKQ4v1oFX
 xsNzeI9j6jGBvVI6hRsHNLOZzhj8/ZcSntdlL+b4FbY++KzrKidMgVECc486cc8t
 IEq/iJHggYhwRtw3EAYblmMVFiQeo07hgSbbSP8mIJWARtqh439tLUyKxW3y/5UT
 UlGLHcsSSwv/5NhY8ugGAYeaGGXNpMMc5ISbssnn5FB6VHSox4nRZai5U9jKoyc2
 iBNNdyLiLi/Fz9YMWj8SAibajT8bchWu1qW2n85nFb3xWQpXcbjzlglnLY6bX3TQ
 1d5ehInNK8deptHNh2eGBsPKOUJ/gDTvEey+6J517hbJ59My96v+dvmbtG7kH9Z8
 157KQzjvHH4X9MDW8wYb381TV8kcNi3b16QPP2RKxuK1Zrve0RLPhOAz/YeSkTDN
 mavHlaY7JvUXjAct0K5VXHvA9U6DBrvc3eb7KoXL4b4+SHr/4UQ=
 =RZ8+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210810' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
- use Android BCB mechanism for reboot reason instead of HW reboot flag
- Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support
2021-08-11 08:31:13 -04:00
Christian Hewitt
480aeb0aa7 board: amlogic: odroid-n2: fix fdtfile suffix for n2-plus
The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so
correct the suffix provided in the board file. Also align the
board ident string shown during boot to match.

Fixes: 8bc780106c ("board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-08-10 10:43:40 +02:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Artem Lapkin
4f038ee6dc board: amlogic: vim3: fix phy-names property setup
phy-names was improperly implemented resulting in an inoperable USB-OTG
port.

- phy-names = "usb2-phy0\0\0usb2-phy1\0";
+ phy-names = "usb2-phy0\0usb2-phy1";

Signed-off-by: Artem Lapkin <art@khadas.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27 10:29:31 +02:00
Artem Lapkin
786c514946 VIM3: mmc_get_env_dev correct non emmc boot sources
need return -1 if boot source is not EMMC or SD ( for example it will be
useful if we have multy env sources configuration and device was booted
from SPI flash and env need read from SPI not from mmc )

Signed-off-by: Artem Lapkin <art@khadas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27 10:28:41 +02:00
Neil Armstrong
2fbd37001c arm: meson: remove static ethernet link setup
The static ethernet link type config code is no more needed because now handled by
the meson8b glue driver, delete it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Marek Szyprowski
8bc780106c board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants
Use the ADC channel 1 to check the hardware revision of the board and
detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use
different dtb file, so adjust fdtfile environment variable to the
detected variant.

The ADC min/max values for each variant are taken from the vendor code,
adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit
mode).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-10 10:00:51 +01:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Artem Lapkin
6bfa331a6e board: amlogic: vim3: fix setup ethernet mac from efuse
Fix reading built-in ethernet MAC address from efuse

NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset

if mac from efuse not valid we use meson_generate_serial_ethaddr

NOTE: remake odroid-n2.c from Neil Armstrong <narmstrong@baylibre.com>

Signed-off-by: Artem Lapkin <art@khadas.com>
[narmstrong: remove MAC print & spurious new endline]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-12 14:25:55 +01:00
Marek Szyprowski
aa3c7912cb board: amlogic: add MMC boot device detection for environment load
Detect eMMC or SD card boot on Odroid-C4/N2 and Khadas VIM3(l) boards and
report proper MMC device for the environment loading code. This allows to
automatically load and store environment variables on the FAT partition
or RAW offset of the MMC device without the need to use different
configurations on eMMC and SD card.

To use this feature with environment stored on FAT partition, one has to
specify an empty device part (i.e. ":1" for the first partition) in
CONFIG_ENV_FAT_DEVICE_AND_PART to let the code to set the device to the
value returned by mmc_get_env_dev() function.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:55 +01:00
Christian Hewitt
b3be2ee656 boards: amlogic: add Beelink S922X board family support
Copied from Odroid N2. Add myself as maintainer.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Marek Szyprowski
d10037e976 board: amlogic: vim3: read ethernet MAC address from efuse
Add the board specific code for reading built-in ethernet MAC address
from efuse.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Christian Hewitt
d412a6015e boards: amlogic: update documentation for WeTek Core2
Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: added wetek-core2.rst to q200 MAINTAINERS and added blank lines to fix build]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Christian Hewitt
ed430519cf boards: amlogic: add WeTek Core2 support
Add a config for the WeTek Core2, largely based on the VIM2 config.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: added wetek-core2_defconfig to q200 MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Pascal Vizeli
d42e7964d9 meson: Add soc_rev to environment
Add SoC revision to environment. This can be useful to select the
correct device tree at runtime (N2/N2+).

Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Jerome Brunet
ade0100a91 arm64: meson: add support for libretech-cc v2
Add support for the Amlogic based libretech cc version 2.
As version 1, it is based on the s905x SoC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: Fixed libretech-cc.rst bullet points]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Neil Armstrong
adbff64af7 board: amlogic: vim3: add support for dynamic PCIe enable
The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.

This adds this dynamic switching right before booting Linux
and the configuration steps in the boards documentation.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed warning by replacing min() by min_t()]
2020-10-05 17:59:45 +02:00
Neil Armstrong
5aeecbcf81 board: amlogic: add a vim3 specific board support
The VIM3 will need a specific code to enable PCIe if enabled in the MCU,
thus add a specific board support for VIM3 & VIM3L.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Neil Armstrong
394c6b0ff1 board: s400: generate unique mac address from SoC serial
Enable unique mac address generation from SoC serial on S400 board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Christian Hewitt
8888d83773 boards: amlogic: add Odroid C4 support
Odroid C4 is an Amlogic SM1 device, the board config and board documentation
are adapted from the Odroid-N2 support from the same vendor.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: fix odroid-c4.rst typos and structure]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Pascal Vizeli
6de936b011 board: amlogic: Add Odroid-N2 board support
Add a proper Odroid-N2 board support to handle the Ethernet MAC
address stored in the in-SoC eFuses.

Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Neil Armstrong
9c55f5d112 board: amlogic: add board doc files to MAINTAINERS
Add the recently added reStructuredText board documentation in the
appropriate MAINTAINERS files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Neil Armstrong
0ce3639d6f board: amlogic: move boards doc into doc/board/amlogic
Move the natural text Amlogic board README files to doc/board/amlogic
into reStructuredText and :
- add reStructuredText markup for bash code
- fix secondary titles markup
- move board support into global support matrix

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Tom Rini
3fadc9ea2f amlogic: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

Cc: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: u-boot-amlogic@groups.io
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Jerome Brunet
e13e7c9dae arm64: dts: meson: add libretech-pc support
Add support for the Amlogic based libretech-pc platform.
This platform comes with 2 variant, based on the s905d or s912 SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: update board/amlogic/q200/MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Christian Hewitt
9c84c21009 boards: amlogic: add Khadas VIM3L support
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip
instead of A311D. Board config is derived from khadas-vim3_defconfig and
sei610_defconfig. README is based on README.khadas-vim3; the difference
is that VIM3L uses FIP files from the g12a folder in vendor sources not
the g12b folder.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07 14:50:28 +01:00
Guillaume La Roque
be2ffa1656 configs: sei610: Add config file to fix userdata size
Add separate config file to handle the different eMMC size on
the sei610 board.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:54:37 +02:00
Neil Armstrong
b8ada582cf boards: amlogic: add SEI610 support
Add support for the customer board SEI610 manufactured by SEI Robotics
with the following specifications:
 - Amlogic S905X3 ARM Cortex-A55 quad-core SoC
 - 2GB DDR4 SDRAM
 - 10/100 Ethernet (Internal PHY)
 - 1 x USB 3.0 Host
 - 1 x USB Type-C DRD
 - 1 x FTDI USB Serial Debug Interface
 - eMMC
 - SDcard
 - Infrared receiver
 - SDIO WiFi Module

Like it's SEI510 counterpart, the boot flow is designed to boot
Android AOSP built for the Yukawa Android device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:47:00 +02:00
Andreas Färber
30b8c2b6cf configs: Add Khadas VIM3 defconfig
Derived from odroid-n2_defconfig and README.odroid-n2.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 11:59:44 +02:00
Daniel Drake
4ae9747804 board: amlogic: document alternative libretech-cc installation methods
As already documented in this README, several binaries must be
glued together in order to boot the device.

Extend the documentation to cover the prebuilt binaries
(saving you the hassle of installing ancient cross-compilers),
and also mention the open source replacements for the encryption
tool (which is especially useful if you want to avoid requiring
32-bit x86 binaries in your build system).

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 10:46:08 +02:00
Tom Rini
60f38d82c4 - amlogic: add support for the SEI Robotic SEI510
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl1RU+gACgkQd9zb2sjI
 SdE/OBAAgytrPuru4s5bBwIqBpMk2IbmNsuAOG6FY6plXpUyaYRsn+wUZikPkkif
 Wv9f/iB2Zv7wHtKnMbM8dafCViaMmU7m5mF71GS2Xt7dEfZZQWN/RWwKe5UfTVxF
 7hI5RU6OQMN8kwEB/AJIoFzhxzND9I2E5gocAafGn+dakmxoNR54rr//7DGlULNM
 kOYucXV5oYwDxc14nUXkYP13UrKds0bN0iWk+s367uPUcUuzEprD+/LV0NYTqLMp
 udCE0RLEvA8b3TxZeR9skjPWwBFc7crzWRsVDBdKujmTEvsZdEoBo0FbqEn6nr1u
 m5Q2dMYn2TvRHL4t7fppeqAryjE6JPmyuHUE4F+umvIs3QOjijgTPmG3pC0Trb1Z
 +iXrcoBbv+/zCbt5TQpPqYwW9wp3VSHGZlY9NZKS+Lwo/+Kj+JEXjzmzpASO8ruU
 5NCQE1mNZtb/i2UDN649NptoNSxV+jP5qjh9rJZuQMF5oL6e3UMrfz/d7EeWOvSY
 MKRZIGm+HEPXwR7dOleHAuHDHBZ5ztWGlYyNMjtgTvgHk499tvvZYQ00LrHU1Uze
 wKeK3uN5UQujcJf14wM2AhHZhB22ZUy4onshY8rI4lUq1oRpc8nZ+31R+xXmuC/o
 wt+KmyTdD4Eva1batGmM1zpl3bSgDndyBo5FNlWH1xY5jZU/6Ro=
 =M0sg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190812' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- amlogic: add support for the SEI Robotic SEI510
2019-08-12 23:03:35 -04:00
Jerome Brunet
0998367515 boards: meson: add g12a sei510
The SEI510 board is based on the Amlogic S905X2 SoC
from the Amlogic G12A SoC family.

The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module

The board default behaviour is for booting Android and triggers
fastboot on recovery or reboot mode.

USB vendor ID (used by fastboot) is 0x18d1 (Google) for
default udev rules for existing android users work out of the box.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12 10:04:03 +02:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Neil Armstrong
b160fac9f7 board: amlogic: add support for Odroid-N2
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd
with the following specifications:

 - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
 - 4GB DDR4 SDRAM
 - Gigabit Ethernet
 - HDMI 2.1 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 3.0 Host, 1 x USB OTG
 - eMMC, microSD
 - Infrared receiver

The board directory is W400, the name of the Amlogic Reference Design
of Amlogic G12B with Gigabit boards, which will be used for similar
boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31 12:10:58 +02:00
Tom Rini
0b7f1a95df - fix khadas-vim README
- add support for unique generated MAC adresses from SoC serial,
   limited to Amlogic GXL/GXM boards for now
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdHgg6AAoJEHfc29rIyEnRjVkP/RmwsBgIdn/0LnuU5JQIcmNI
 S8fOV2u5YY4q4hX/5qgg6uN7/yONtiZjw4bxLJGLCj0SUQ6Tv8KgE+Jh1vswek6P
 ceOsIBfyg3ZX6INkH/moHH8/yl1NpirYjNGxw1Bg9ctBHPR9smQdh50pMyDy67mG
 E2Dja/TtOuggF6N98WSu1jB8UBA55CbEEBj1PkQt7K9bXJs9cEGSrpyZLEJvsRmL
 Pot1l1A9XKhRS3PylgoxmXWNXFD8wAk8LHEACUsxnybiWoIW5Dfao/4PSmPigXAp
 n9V3tU/OQECar0CKOtCod5pS5z8TVPuuaay/Y/+ijLlCktJBwkSaGWIhf9ILOjOW
 UTlcsFDR4KDqaEFKNDoOtOGYpczFrduU0b1hq1qu4hLV7YIxg738DoRr30JM5Lwa
 gJbUCHkPRnxVB3UztsctmQwZwfKmAdvd1CrzKqFBvemrQrf2AwfBweiAv8/AUzqq
 c7o0K0WdP/03CkmBU8KbyFn2N1X2VT1KlqgEVfRTq7UWTiLnS4j9AAiwNapGOb4M
 Ox7eODLbLw3UyZYjDuBHyPYa8uPhtVDpuFCPn2JnwFdbnT4kfE535pCKT/vbasYd
 0UQkgUPoIHm0VGhxv0hkjmrjqgv5CLQyAYhJVGATTH0Nc9dYGFKF/Gm6YIUpjUuW
 nhSh5HHVCg4dkogiMJ7u
 =BL1s
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190704' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- fix khadas-vim README
- add support for unique generated MAC adresses from SoC serial,
  limited to Amlogic GXL/GXM boards for now
2019-07-08 16:02:19 -04:00
Neil Armstrong
1f83431f00 board: amlogic: add mailing-list to MAINTAINERS
Add missing mailing-list to the amlogic boards MAINTAINERS file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 11:36:52 -04:00
Neil Armstrong
3f1f9f08eb board: amlogic: Generate unique MAC address for Q200 and P212 based boards
Enable unique MAC address generation for boards usins SoCs having
a known functional and valid unique serial number.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00
Andreas Färber
aca71d6927 board: amlogic: vim: Fix README
Unlike the BayLibre repos Khadas' repo defaults to using native gcc,
so specify the CROSS_COMPILE setting matching the prescribed toolchain.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04 16:04:59 +02:00