Commit graph

17 commits

Author SHA1 Message Date
Paul Gortmaker
1667013ddf MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC
These boards were meaning to deploy this value:

  #define LCRR_DBYP        0x80000000

but were missing a zero, and hence toggling a bit that
lands in an area marked as reserved in the 8548 reference
manual.

According to the documentation, LCRR_DBYP should be used as:

   PLL bypass. This bit should be set when using low bus
   clock frequencies if the PLL is unable to lock.  When in
   PLL bypass mode, incoming data is captured in the middle
   of the bus clock cycle.  It is recommended that PLL bypass
   mode be used at frequencies of 83 MHz or less.

So the impact would most likely be undefined behaviour for
LBC peripherals on boards that were running below 83MHz LBC.
Looking at the actual u-boot code, the missing DBYP bit was
meant to be deployed as follows:

      Between 66 and 133, the DLL is enabled with an
      override workaround.

In the future, we'll convert all boards to use the symbolic
DBYP constant to avoid these "count the zeros" problems, but
for now, just fix the impacted boards.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-11 13:57:56 -06:00
chenhui zhao
568336ecc7 powerpc/mpc85xxcds: Fix PCI speed
The CDS uses PCICLK as SYSCLK. The PCICLK should be 33333333Hz or 66666666Hz.

Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 08:52:14 -05:00
Becky Bruce
7ea3871e06 MPC8xxx DDR: align informational prints
Add spaces to cause the informational prints to line up with
the ones from init_func_ram() in board.c.  Output now looks like
this:

....
DRAM:  Detected 4096 MB of memory
       This U-Boot only supports < 4G of DDR
       You could rebuild it with CONFIG_PHYS_64BIT
       DDR: 2 GiB (DDR2, 64-bit, CL=5, ECC off)
....

The prints from lbc_sdram_init() have also been modified to line
line up and changed to start with "LBC SDRAM" instead of the
confusing "SDRAM".

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:19 -06:00
Becky Bruce
70961ba414 mpc85xx: rename sdram_init() lbc_sdram_init()
sdram_init() is used to initialize sdram on the lbc.  Rename it
accordingly.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:19 -06:00
Becky Bruce
38dba0c2ff mpc85xx boards: initdram() cleanup/bugfix
Correct initdram to use phys_size_t to represent the size of
dram; instead of changing this all over the place, and correcting
all the other random errors I've noticed, create a
common initdram that is used by all non-corenet 85xx parts.  Most
of the initdram() functions were identical, with 2 common differences:

1) DDR tlbs for the fixed_sdram case were set up in initdram() on
some boards, and were part of the tlb_table on others.  I have
changed them all over to the initdram() method - we shouldn't
be accessing dram before this point so they don't need to be
done sooner, and this seems cleaner.

2) Parts that require the DDR11 erratum workaround had different
implementations - I have adopted the version from the Freescale
errata document.  It also looks like some of the versions were
buggy, and, depending on timing, could have resulted in the
DDR controller being disabled.  This seems bad.

The xpedite boards had a common/fsl_8xxx_ddr.c; with this
change only the 517 board uses this so I have moved the ddr code
into that board's directory in xpedite517x.c

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-14 01:32:19 -06:00
Peter Tyser
8ca78f2c89 fsl: Clean up printing of PCI boot info
Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup.  This
patch unifies the style to look like:

...
NAND:  1024 MiB
PCIE1: connected as Root Complex
           Scanning PCI bus 01
        04  01  8086  1010  0200  00
        04  01  8086  1010  0200  00
        03  00  10b5  8112  0604  00
        02  01  10b5  8518  0604  00
        02  02  10b5  8518  0604  00
        08  00  1957  0040  0b20  00
        07  00  10b5  8518  0604  00
        09  00  10b5  8112  0604  00
        07  01  10b5  8518  0604  00
        07  02  10b5  8518  0604  00
        06  00  10b5  8518  0604  00
        02  03  10b5  8518  0604  00
        01  00  10b5  8518  0604  00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
           Scanning PCI bus 0d
        0d  00  1957  0040  0b20  00
PCIE2: Bus 0c - 0d
In:    serial
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org
2010-11-14 23:46:42 +01:00
Becky Bruce
f51cdaf191 83xx/85xx/86xx: LBC register cleanup
Currently, 83xx, 86xx, and 85xx have a lot of duplicated code
dedicated to defining and manipulating the LBC registers.  Merge
this into a single spot.

To do this, we have to decide on a common name for the data structure
that holds the lbc registers - it will now be known as fsl_lbc_t, and we
adopt a common name for the immap layouts that include the lbc - this was
previously known as either im_lbc or lbus; use the former.

In addition, create accessors for the BR/OR regs that use in/out_be32
and use those instead of the mismash of access methods currently in play.

I have done a successful ppc build all and tested a board or two from
each processor family.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-16 10:55:09 -05:00
Kumar Gala
b0fe93eda6 85xx: Use common LSDMR defines from asm/fsl_lbc.h
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-30 13:33:49 -05:00
Trent Piepho
a5d212a263 mpc8xxx: LCRR[CLKDIV] is sometimes five bits
On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
instead of four.

In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
should be safe as the fifth bit was defined as reserved and set to 0.

Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-12-19 18:20:25 -06:00
Wolfgang Denk
8ed44d91c8 Cleanup: fix "MHz" spelling
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:39 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jon Loeliger
2b40edb10d FSL DDR: Convert MPC8555ADS to new DDR code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:49 -05:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Kumar Gala
ddde74a159 85xx: remove dummy board_early_init_f
A number of board ports have empty version of board_early_init_f
for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:36:02 -05:00
Kumar Gala
978e81604c 85xx: Remove unused and unconfigured memory test code.
Remove unused and unconfigured DDR test code from FSL 85xx boards.
Besides, other common code exists.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:35:52 -05:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Kumar Gala
415a613bab Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
Minor path corrections needed to ensure buildability.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Renamed from board/cds/mpc8555cds/mpc8555cds.c (Browse further)