Commit graph

3224 commits

Author SHA1 Message Date
Marek Vasut
cf8c836788 watchdog: designware: Convert to DM and DT probing
Convert the designware watchdog timer driver to DM and add DT probing
support. Perform minor coding style clean up, like drop superfluous
braces. These ought to be no functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
2020-02-05 03:01:57 +01:00
Kuldeep Singh
e5720648e6 arm: dts: lx2160a: Add FSPI node properties
Align flexspi node properties with linux device-tree properties
Tested on LX2160A-RDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Kuldeep Singh
5e2fb3eaa0 arm: dts: ls1028a: Add FSPI node properties
Align flexspi node properties with linux device-tree properties
Tested on LS1028A-RDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Michael Walle
3ffe090d4e arm: dts: ls1028a: fix interrupt properties
Sync the interrupt properties with the ones from Linux. Also use the
constants provided by the dt-bindings header. Please note, that there
are actual changes/fixes in the irq flags. U-Boot won't use the
interrupt properties anyway. It's just to be consistent with the Linux
device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Michael Walle
922ac0f661 arm: ls1028a: use the new flexspi driver
Also align the fspi node with the kernel one.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Faiz Abbas
16217edd03 arm: dts: k3-j721e-main: Add Support for gpio0
Add the main_gpio0 node.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
b6427783a8 arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPL
IO expanders are required to power cycle SD card. So enable the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
18402a104e arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander
Add I2C GPIO expander required to power cycle MMC/SD

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
01ec6a5ae1 arm: dts: k3-j721e: Add I2C nodes
J721e SoC has 2 I2C instances in MCU domain and 7 I2C instances in main
domain. Add DT nodes for the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
b070f58b44 arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral mode
Enable USB0 in peripheral mode so that it be used for DFU

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Kever Yang
a7eb9ae349 rockchip: rk3308: add alias for emmc/sdmmc
Add alias for mmc/sdmmc so that we can have a fix mmc number for emmc.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-30 11:44:02 +08:00
YouMin Chen
4082a68142 ram: rk3328: update lpddr3 setting
update lpddr3 setting for fix init fail about "col error".

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
YouMin Chen
c7df6483c2 ram: rk3328: add support ddr4 init
Add rk3328-sdram-ddr4-666.dtsi for support ddr4 init.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
79030a4861 rockchip: Add Single boot image (with binman, pad_cat)
All rockchip platforms support TPL or SPL-based bootloader
in mainline with U-Boot proper as final stage. For each
stage we need to burn the image on to flash with respective
offsets.

This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
- pad_cat, for arm64 rockchip platforms.

This would help users to get rid of burning different
boot stage images.

The new image called 'u-boot-rockchip.bin'
which can burn into flash like:

₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64

This would support all rockchip platforms, except rk3128
since it doesn't support for SPL yet.

Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Cc: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
a1b75cf941 arm: dts: rk3188: Add rk3188-u-boot.dtsi
Add U-Boot specific dtsi file for rk3188 SoC. This
would help to add U-Boot specific dts nodes, properties
which are common across rk3188.

Right now, the file is empty, will add required changes
in future patches.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
f48299a883 arm: dts: rk3036: Add rk3036-u-boot.dtsi
Add U-Boot specific dtsi file for rk3036 SoC. This
would help to add U-Boot specific dts nodes, properties
which are common across rk3036.

Right now, the file is empty, will add required changes
in future patches.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
1c37f60c28 rockpro-rk3399: Enable SPI Flash
Enable winbond SPI flash for ROC-PC-RK3399 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
3d11196c80 roc-pc-rk3399: Enable SPI Flash
Enable winbond SPI flash for ROC-PC-RK3399 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
c8b1684a8c rockchip: dts: Sync ROC-RK3399-PC changes from Linux
Sync the ROC-RK3399-PC device tree changes from Linux
with below commit details:

commit <c36308abe4110e4db362d5e2ae3797834a7b1192> ("arm64: dts:
rockchip: Enable MTD Flash on rk3399-roc-pc")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Tom Rini
3e12744a90 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsung
- Various exynos fixes
2020-01-28 21:10:32 -05:00
Tom Rini
0b23b0d9f9 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai)
- Allwinner R40 Ethernet, usb phy enablement (Andre Przywara)
- Sunxi auto load from 128KB MMC offset (Andre Przywara)
- Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26 12:05:11 -05:00
mingming lee
7d017d607e usb: musb-new: mt85xx: add musb-new gadget driver.
Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25 12:04:36 -05:00
Andre Przywara
69d06935de sunxi: dts: R40: Update Bananapi M2 Berry .dts
Update the .dts file from the kernel, which carries much more nodes,
some of them we need to enable USB and Ethernet support for the board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:50 +05:30
Chen-Yu Tsai
b5fe523bbc sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
Sync the device tree files and device tree header files from upstream
Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo

    98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next

which is also part of next-20200108.

Changes brought in include:

  - cleanup of pinmux node names
  - addition of Security ID, MBUS, CSI, crypto engine, video codec,
    pmu, and thermal sensor device nodes for both SoCs
  - addition of deinterlacing engine device node on H3
  - cleanup of RTC device node and addition of its clocks
  - various board cleanups and improvements
    - removal of pinmux node for GPIO lines
    - cpufreq / DVFS
    - HDMI output
    - UART-based Bluetooth
    - audio codec
    - USB ports
  - new boards

Most of the changes don't concern U-boot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:49 +05:30
Philippe Reynes
645b7ec52c bcm968360bg: add initial support
This add the initial support of the broadcom reference
board bcm968360bg with a bcm68360 SoC.

This board has 512 MB of RAM, 256 MB of flash (nand),
2 USB port, 1 UART, and 4 ethernet ports.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23 07:29:58 -05:00
Philippe Reynes
6454e95f4f bcm68360: add initial support
This add the initial support of the broadcom bcm68360 SoC family.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23 07:29:58 -05:00
Marek Szyprowski
da63b5da61 arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card)
Use MMC0 for eMMC and MMC2 for SD-card as other Exynos-based boards do.
This allows to use common code to get MMC device id based on the XOM[7:5]
pins.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:43:10 +09:00
Marek Szyprowski
1bca28a5d9 arm: dts: exynos: Fix card-detect polarity for SD card on Odroid U3/X2
Card detect line for SD-card on Odroid U3/X2 boards are active low, so
add cd-inverted property to indicate this, as u-boot's GPIO driver doesn't
support specifying line polarity. This restores S5P_SDHCI driver operation
on Odroid U3/X2 boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:43:10 +09:00
Marek Szyprowski
a6ee3fe19d arm: dts: exynos: Extend board description
u-boot uses the same DTS for the all Odroid XU3-based boards, so list
them in the model description to let user know that those boards are
supported.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:41:49 +09:00
Stephan Gerhold
43d28855d8 board: Add new Samsung "stemmy" board based on ST-Ericsson U8500
The ST-Ericsson U8500 SoC has been used in mass-production for
some Android smartphones released around 2012.
In particular, Samsung has released more than 5 different
smartphones based on U8500, e.g.

  - Samsung Galaxy S III mini (GT-I8190) "golden"
  - Samsung Galaxy S Advance (GT-I9070)  "janice"
  - Samsung Galaxy Xcover 2 (GT-S7710)   "skomer"

and a few others.

Mainline Linux has great support for the Ux500 SoC, so these
smartphones can also run Linux mainline quite well.

Unfortunately, the original Samsung bootloader used on these devices
has limitations that prevent booting Linux mainline directly.
It keeps the L2 cache enabled, which causes Linux to crash very early,
shortly after decompressing the kernel.

Using U-Boot allows to circumvent these limitations. We can let the
Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache
before booting into Linux. U-Boot has several other advantages
- it supports device-trees directly and we are no longer limited to
flashing Android boot images through Samsung's proprietary download
mode.

The Samsung "stemmy" board covers all Samsung devices based on U8500.
Add minimal support for "stemmy". For now only UART is supported but
this will be extended later.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Stephan Gerhold
689088f9da arm: Add support for ST-Ericsson U8500 SoC
The NovaThor U8500 SoC was released by ST-Ericsson in 2011.
It was used for some development boards like the CALAO Systems
Snowball SBC, but mass production was primarily for Android
smartphones like the Samsung Galaxy S III mini.

Previous support for U8500 was removed in
commit 68282f55b8 ("arm: Remove unused ST-Ericsson u8500 arch")
since none of the boards were converted to generic boards
before the deadline.

The new code does not have much in common with the previous code.
I have completely rewritten everything, embracing the Driver Model
and device trees wherever possible.

The U8500 support is a bit more minimal for now - my primary
use case is to use U-Boot as alternative bootloader for some of the
U8500 Samsung smartphones. At the moment U-Boot is chain-loaded from
the original Samsung bootloader. A side effect of this is that we
can (temporarily) get away without implementing some functionality
- e.g. all clocks are already enabled by the original bootloader.

More functionality will be added in future patches.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: John Rigby <john.rigby@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Stephan Gerhold
f13dc8cbd9 arm: dts: Import device tree for ST-Ericsson Ux500
from https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git/
tag "ux500-armsoc-v5.6-2"
commit 224bf0fe7292 ("ARM: dts: ux500: samsung-golden: Add Bluetooth")

(queued for merge in Linux 5.6)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Tom Rini
75dd53055a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Clearfog: Add run-time board detection with TLV EEPROM support
  (Baruch)
2020-01-21 18:10:28 -05:00
Baruch Siach
ae7ba525a5 ARM: mvebu: clearfog: add EEPROM devices
Add device-tree description for the EEPROM devices on Armada 388 SOM rev
2.1.

Another EEPROM is now on Clearfog Pro carrier rev 2.2, and Clearfog Base
rev 1.3.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21 15:55:46 +01:00
Tom Rini
ad647690b1 ---------------------------------
imx8: cleanup, fix warnings
 imx6ull: add VisionSOM SoM and EVK
 mx7ulp: fix warning due network, cleanup
 mx7dsabre: Fix dm probe pmic
 imx6: fixed for vining2000
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4m+D4PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3hz0L/Rm48j733TNi7ZokndEr0+caMqk6PmJWE0Dy
 Uq4MwhhCkbPWP+uLQUY6yq64HXdx1fNaQnRzPiiaX2Ng9E/E9piOaYOKtKKs1j4q
 W+RiWfrGebgMemb8f2j4cot23KMUVk5/rv+EFn+oJkX7HD4ou/ikB4269/7b75Dg
 1HsrsjWQq7Wsi4baVZZcfs92xTXltpkGEzgKFURt1tqU1TT1I+PX92aM/Df+qUYu
 ++DQTMr0kZ/yMlzxTvUJYN0KRkMnn6W07X/qQyU1YwioQmC1ZJ7zYBNZfoAG1XFs
 0g6+XqfgLsDrTIeqz4/b98exXPdQqFNgRlUFnbVa0hZcehwxFUsb8J9edPl60k3r
 SYTOaIB8KuKstaNnaWJZm678THDrAXwpxSH9/ORRLX9tCnGBOY1Uy9Q+TJtpQ4K+
 YGEeoKhMTMFcWxxZvpT75tvJMtcRdUw9rT+a5yuyD56NdYUmwiEw5c8hBa3vc26X
 C9P5jBxXbZIQQW67wMt0fFT1QdU5RA==
 =qKsO
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200121' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------

imx8: cleanup, fix warnings
imx6ull: add VisionSOM SoM and EVK
mx7ulp: fix warning due network, cleanup
mx7dsabre: Fix dm probe pmic
imx6: fixed for vining2000

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21 08:36:50 -05:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Jorge Ramirez-Ortiz
4cd1f979b2 arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is
no need to repeat it in the PAD configuration value (more over since
this information will be masked out when the configuration value is
applied).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20 15:38:16 +01:00
Anatolij Gustschin
68b49056e6 arm: dts: i.mx8x: add #cooling-cells properties
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0])

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20 15:38:16 +01:00
Arkadiusz Karas
5b6f8f3083 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support.
The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier
board has Ethernet, USB host port, USB OTG port.

Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-01-20 15:38:16 +01:00
Vignesh Raghavendra
60120071da arm: dts: k3-am654-base-board: enable USB1
Add pinmux for USB1 and enable it as a peripheral port in U-Boot
specific dtsi since U-Boot does not support OTG.
Disable USB0 as its not available on the baseboard.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Vignesh Raghavendra
a1ac85dad2 arm: dts: k3-am65-main: add USB support
Add support for USB0 and USB1 instances on the AM6 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Adam Ford
e36c70e86b ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb
None of these boards boot, but the solution appears to be the same.
All the boards have SPL that is too large.  With a few defconfig
options removed, these corresponding options can be removed from
their respective SPL dtb files.

This patch unifies the DM37/OMAP35 boards' -u-boot.dtsi files
to remove gpio's, i2c, bandgap, thermal zones, unneeded uarts, and
unneeded MMC nodes.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Lokesh Vutla
57a088a0f0 arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0
wkup_vtm populates only 1 power-domain cell in it's node. But the
power-domain cell are defined as 2. Due to this the following warning
comes during build:

arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property):
/interconnect@100000/interconnect@28380000/interconnect@42040000/
wkup_vtm@42050000:power-domains: property size (8) too small for cell size 2

Fix this by updating the power-domain cells.

Fixes: cfa6bd549c ("arm: dts: k3-am654-r5-base-board: Add VTM node")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Andreas Dannenberg
c44fb27af8 arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use
Make the wkup_i2c0 module usable across all stages of U-Boot by adding
the needed definitions including the associated pinmux definitions.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Jason Kridner
a84189464c board: ti: beagleboneai: add dts file
BeagleBoard.org BeagleBone AI is an open source hardware single board
computer based on the Texas Instruments AM5729 SoC featuring dual-core
1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal
processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4
processors, dual programmable realtime unit industrial control
subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB
HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz,
Bluetooth, and BeagleBone expansion headers.

For more information, refer to:
https://beaglebone.ai

The corresponding patch against the mainline linux kernel can be found
at: https://patchwork.kernel.org/patch/11254903/

This patch introduces the BeagleBone AI device tree.

Note that the device use the "ti,tpd12s016" component which is software
compatible with "ti,tpd12s015". Thus we only use the latter driver.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Caleb Robey <c-robey@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
ccc855e9d9 arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card
Add pinmux for sdhci1 node connected to the SD card.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
2e6e3a4e8c arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from sdhci nodes
voltage-ranges properties are NOP. Remove them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
fe0e30c7ba mmc: am654_sdhci: Get Xin clock by name
Get clk_xin by name instead of by index to avoid having to put clocks in
the same order in all devices.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Adam Ford
d2a67e362f ARM: dts: da850-lcdk: Update DTS files for SPL device tree support
Currently, the da850-lcdk uses SPL_OF_PLATDATA and manually loads
the necessary source code instead of using the auto-generated,
because the drivers don't properly autogenerate the code.

This patch simply enables the various device tree options to
mimic the da850-evm which doesn't need or use OF_PLATDATA for
device tree support.  It does not disable OF_PLATDATA.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Vignesh Raghavendra
5aeab3bf5e arm: dts: k3-j721e: Add DT nodes for USB
J721e has two instances of Cadence USB3 controller. Add DT nodes for the
same. USB0 is configured to device mode and USB1 is configured to host
mode. For now only high speed mode is supported.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Marek Vasut
db48e11b1e ARM: dts: stm32: Add missing ETHCK clock to ethernet node
Add missing 'eth-ck' clock to the ethernet node. These clock are used to
generate external clock signal for the PHY in case 'st,eth_ref_clk_sel'
is specified.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17 16:26:42 +01:00
Patrick Delaunay
846254888e stm32mp1: split board and SOC support for STM32MP15x family
Split the board and SOC support for STM32MP15x family and
prepare the introduction of new boards with STM32MP15x.

This path define the 2 configurations:
- STM32MP15x: STM32MP15x soc support (new)
- TARGET_ST_STM32MP15x: STMicroelectronics board support (choice)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17 13:58:27 +01:00
Tom Rini
92329e2413 Xilinx/FPGA changes for v2020.04
ARM64:
 - Add INIT_SPL_RELATIVE dependency
 
 SPL:
 - FIT image fix
 - Enable customization of bl2_plat_get_bl31_params()
 
 Pytest:
 - Add test for octal/hex conversions
 
 Microblaze:
 - Fix manual relocation for one SPI instance
 
 Nand:
 - Convert zynq/zynqmp drivers to DM
 
 Xilinx:
 - Enable boot script location via Kconfig
 - Support OF_SEPARATE in board FDT selection
 - Remove low level uart setup it is done later by code
 - Add support for DEVICE_TREE variable passing for SPL
 
 Zynq:
 - Enable jtag boot mode via distro boot
 - Removing unused baseaddresses from hardware.h
 - DT fixups
 
 ZynqMP:
 - Fix emmc boot sequence
 - Simplify spl logic around bss and board_init_r()
 - Support psu_post_config_data() calling
 - Tune mini-nand DTS
 - Fix psu wiring for a2197 boards
 - Add runtime MMC device boot order filling in spl
 - Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
 - Add support u-boot.its generation
 - Use single image configuration for all platforms
 - Enable PANIC_HANG via Kconfig
 - DT fixups
 - Firmware fixes
 - Add support for zcu208 and zcu1285
 
 Versal:
 - Fix emmc boot sequence
 - Enable board_late_init() by default
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXiAK2AAKCRDKSWXLKUoM
 IX3VAJ41GJXBwP7Z9hX9RFhsqOu0M+NdegCdFvMUaCQ1bSvgAMOnDL+JeB21+Qo=
 =qSbv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default
2020-01-16 09:45:40 -05:00
Sam Shih
098c063765 arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
This patch move u-boot properties to -u-boot.dtsi file.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
c7fbc62082 Add support for MT7622 reference board
This adds a general board file based on MT7622 SoCs from MediaTek.
This commit is adding the basic boot support for the MT7622 rfb.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16 09:39:45 -05:00
Sam Shih
ac57e2b013 ARM: MediaTek: Add support for MediaTek MT7622 SoC
Add support for MediaTek MT7622 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
b9bf3cbfd6 ARM: MediaTek: add basic support for MT8512 boards
This adds a general board file based on MT8512 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8512 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
953bb4c3ce ARM: MediaTek: Add support for MediaTek MT8512 SoC
Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Tom Rini
fb537657d9 -----------------------------------
- imx8:
 	add capricorn giedi deneb boards
 - imx6:
 	fixed fow wandboard
 - imx7: DM_ETHER for pico-imx7d
 - fsl_esdhc_imx: add broken-cd property
 - New SOC: IMXRT10xx
 
 Travis:
 	https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4fDV8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3rIoMAJpEFx8ModHg3Xx69zQDcjHgzQn+dPatKgZc
 btSMCuAU3Toxifxj+/QR1NNNNYLBFG4BneqahbKV/c3seIbQjPJLxqTf4ceAJY6o
 MdsbcYSm8KwkLv2UWHV0CHTKtVJzNAxprPoW5ZxrULDORPyl56hdUWOKiDnKPx0z
 /vUeF7R3jglIMZ84rEDLSOew0xiYxhicMXfZB4oc2Jj8lXrpSHYf4adFitk9zG1j
 dumCkYSfDVyqeZytbkDa0CEZdJrXuy+tat2nTc30Asb4g/HoAuuST33cO29IMwqC
 foz3SMRFYgpHahYhVyNW8X+qLPxXGvIWi9md3fm9dNc44MRjVdj0dIq+vVY5lbct
 FWkayqmeMZLHLzzlbziIOsgDSo4n12MtAfcA8fLDN6OcxJL13A2xfR6E6BoaCgwY
 a7SRJWvr9AnVayOAH07rCCMvJNtppD5fi54a65LEKs7cUgeUY030ebhhqvzcDosH
 n++s1ukmD44yoX6vxruDQz2yWcmW3Q==
 =v3rf
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200115' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

-----------------------------------
- imx8:
	add capricorn giedi deneb boards
- imx6:
	fixed fow wandboard
- imx7: DM_ETHER for pico-imx7d
- fsl_esdhc_imx: add broken-cd property
- New SOC: IMXRT10xx

Travis:
	https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
2020-01-15 09:22:15 -05:00
Giulio Benetti
8d9c0762a8 imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:54:00 +01:00
Giulio Benetti
e12b737e93 ARM: dts: imxrt1050: add dtsi file
Add dtsi file for i.MXRT1050.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:53:59 +01:00
Anatolij Gustschin
85d89b9399 imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2
IPG clock description is missing for I2C0 and I2C2 busses,
add it. Otherwise we see -ENODATA error when trying to get
I2C clock for these busses.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-01-14 22:49:05 +01:00
Fabio Estevam
80d37c7959 ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property
imx6ul-14x14-evk does not have a GPIO dedicated for reading the card
detect pin on the eSDHC2 port. In such cases the "broken-cd" property
must be passed, otherwise the card cannot be detected.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14 22:48:10 +01:00
Anatolij Gustschin
eb79cafea2 imx: add imx8x based deneb board
Add support for Capricorn Deneb SoM variant.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Anatolij Gustschin
7b5b934313 imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.

Supported interfaces: GPIO, ENET, eMMC, I2C, UART.

Console output:

  U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
  Trying to boot from MMC1
  Load image from MMC/SD 0x3e400

  U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07

  CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C

  Model: Siemens Giedi
  Board: Capricorn
  Boot:  MMC0
  DRAM:  1022 MiB
  MMC:   FSL_SDHC: 0
  Loading Environment from MMC... OK
  In:    serial@5a080000
  Out:   serial@5a080000
  Err:   serial@5a080000
  Net:   eth1: ethernet@5b050000 [PRIME]
  Autobooting in 1 seconds, press "<Esc><Esc>" to stop

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Stephen Warren
fddfe87359 tegra: fdt: Add tegra186-u-boot.dtsi
All Tegra chips except Tegra186 have a tegraNNN-u-boot.dtsi. Duplicate
Tegra210's copy of this file for Tegra186. This ensures that a /binman node
exists in U-Boot's control DT. Subsequent to 3c10dc95bd ("binman: Add a
library to access binman entries") this appears to be required. I haven't
really investigated why all this is necessary or how it works, but simply
observed the boot failure listed below, bisected it, noticed the
inconsistency in DT files, and found that fixing it resolved the boot
issue.

    U-Boot 2020.01-rc4-00256-g3c10dc95bdd0 (Jan 07 2020 - 10:25:00 -0700)

    SoC: tegra186
    Model: NVIDIA P2771-0000-500
    Board: NVIDIA P2771-0000
    DRAM:  7.8 GiB
    initcall sequence 00000000fffb7858 failed at call 00000000800955a8 (err=-22)
    ### ERROR ### Please RESET the board ###

Fixes: 3c10dc95bd ("binman: Add a library to access binman entries")
Fixes: f2faffecb0 ("binman: tegra: Convert to use binman")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14 10:35:19 -07:00
Zumeng Chen
d12c8ccdc4 ARM: dts: zynq: enablement of coresight topology
This patch is to build the coresight topology structure of zynq-7000
series according to the docs of coresight and userguide of zynq-7000.

Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
b0f36d5ec1 arm64: zynqmp: Sync gem clock nodes with mainline Linux
Just fixing indentation and update year in Copyright.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
b94a3c2ebe arm64: zynqmp: Sync gpio-controller name location
Sync location with mainline kernel.
Added by Linux kernel commit 75926f07baae
("arm64: dts: zynqmp: Add missing gpio-controller to ps gpio").

Fixes: 0b33e0b156 ("arm64: zynqmp: Add missing gpio property to dtsi")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Sudeep Holla
ad967af6bd arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.

This patch replaces the legacy properties with the unified
"wakeup-source" property introduced by:
"Input: gpio_keys - switch to using generic device properties"
(sha1: 700a38b27eefc582099fdf69effacfad0ad738a4)

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Jan Kiszka
85eeaae3cc arm64: dts: zcu100-revC: Give wifi some time after power-on
Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
096d7f5b3e arm64: dts: zynqmp: Fix node names which contain "_"
s/_/-/ for node names.

It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...

Issues reported by make dtbs W=12

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Rob Herring
8e3501ec90 arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string
The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.

This fixes warnings generated by the DT schema.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-14 09:05:55 +01:00
Michal Simek
32da535b89 arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up
zcu102-revB/up are not removing phy from revA properly because of incorrect
name.

Fixes: 2975a42b42 ("arm64: zynqmp: Use ethernet-phy as node name for ethernet phys")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
4ed9732471 arm64: zynqmp: Add support for zcu1285 revA board
zcu1285 is the same as zcu1275 but it is using Avnet FMC
http://www.ultrazed.org/product/network-fmc-module

Unfortunately not everything is connected now that's why this is only
describing system which Xilinx is using.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
cecf7f4958 arm64: zynqmp: Switch zcu100 revC to use firmware clock driver
There is no issue with using firmware based driver instead of fixed clock
one.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
T Karthik Reddy
166fb46ad3 zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodes
Removed no-1-8-v property from zynqmp sdhci devicetree nodes to
allow UHS-I capable SD cards to work in SD3.0 UHS modes.

Boards that does not have level shifter for SD, does not support 1.8v.
so no-1-8-v property to sdhci dt nodes should be present in zcu102 Rev-A,B,
zcu104 Rev-A,C, zcu100, zcu1275 Rev-B boards.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
a81186fd9f arm64: zynqmp: Add support for zcu208
The board is very similar to zcu216 with zu49dr device.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
4cd8bf47ed ARM: zynq: Add missing nand/smcc nodes
Add missing nand/smcc description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Raviteja Narayanam
268695dbd1 arm64: zynqmp: Correct the type of eeprom for zcu216 boards
Corrected the type of eeprom in device tree for zcu216 boards according
to schematic.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
50e45b7c6e arm64: zynqmp: Fix ina226 shunt resistor value
Fix shunt resistor value for ina226 vccint_ams and vccint_io_bram_ps.
2mOhm shunt was only in early board revision schematics but never got to
real revA board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
bc12dec017 arm64: zynqmp: Remove nand partition description from mini-nand
There shouldn't be a need to use any partition description because it
can be used for writing data anywhere.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:53 +01:00
Tom Rini
21aede21b0 UniPhier SoC updates for v2020.04
- add pinmux nodes for I2C ch5, ch6
 
 - enable SPI driver and command
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl4WDlkeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG/tAP/3V1E52ESaMjqjSn
 eU2jrXMJFTWcvkVUfLzWnXuApPPx5Xm7nGVVlJory3z8PI6KJFuZJTejeS2tOtU3
 5JjQ56GyldXwyGQp8WsQL8RhGCMovlbUNXuGSR4MNoN0U+81Y1RGYuaNP+qwXfnK
 BVtQBdtnAuH4RxywNNVsxwGoCra7b30cKdmiowc6cb6u4RSnDv42EpgHan2JCgYx
 pui7+hLK7ZdN/ssgc6LquuwIW6IICAdlLosMjsmVty53yLrcXRZtiVHEZskgLC+O
 L84fqDSShgoNnaJJFC2kebuf6iFzw4ZPmSU2tEW4mGvXLC7OEqwvOZqrs0GVsFhz
 48CnkqXYCbfm696minmikXDSVSy1A2ZlRV8bJID0vFjUNot5bor9VSRpe9UV9hqv
 PsevZWPfTuravk7TUBzdn2/dAEtDuzUHSt6v5AJI+08Sph1qYVyGOizpAOJUkv7E
 p0dBM3hhSeGE3kNPwWOB1bHjEmyIc1dXeH5ZNYf0mb1tIEOVSzJMJIoluBJHO6BA
 56F9eBi2rC9gL9R5qV9guugdidYeLE7tys7Q6P3NFyxiouENB/Dcd0e2TSc474Uj
 FaDSUONYNbMP0wr8ShCPQ0RGw8dyCvYBPEdSqYVdNLZZ2TQMX/cgjz+0bDxhFq3r
 9Ol9Tlf9qPGLRDLmmA9d+xFEjyS7
 =3xuH
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.04

- add pinmux nodes for I2C ch5, ch6

- enable SPI driver and command
2020-01-08 15:25:13 -05:00
Tom Rini
deb287b561 ---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
 Update README for i.MX8MN EVK and fix mmc env
 Add pca9450 driver
 --------------------------------------------------------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4WDPkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30w0L/RGSJLeO460ULkMQMGEkbMLODzWinIuVSUUe
 wEGikQZwI4AiDWX1NA57Dpx7uVF/ADa/NT2x9YLZL8VPHgzuU7RDp57pdBymU0Wk
 k/kDqSPVkIA0CX8iF/l092vOOIKecIpxpEXblRYs+Az7Vusrwm6SxQ3hjSn6KgpY
 gtu/VB+XizejiYmE5hJhu8cvMpAeCrJ0a+qPJC+hVsvFC2wV3NoqJspMOIUt+rPm
 UCv4uSisSWf2MgR2rEYbX9IDgu7S3hcj/8Ml4f9aqQQBciS4X/Af+iUjZL/mXY2K
 ZerDGQhC92TRmTj9Ir6mf8CEAdt0scsNgTVvteN/evP85K25s2l7yrYWjyp5H/vm
 tao0H/Lr8gKlLKgMSgdLixoV8eaMHPE4I/BD+DGVIK1rOQ35zzYTJRd2PIxg7GiP
 7orW29rJrPMAMDBbeEi657u/zUS7ZUzkrLWnIIoFurUfZ83pjlqlxcT1zfZ0juJk
 z8iQKU4oKdN4gL5zQPbyqCHcCdlDJw==
 =YoPF
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
Update README for i.MX8MN EVK and fix mmc env
Add pca9450 driver
--------------------------------------------------------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08 15:24:50 -05:00
Tom Rini
ce022f2857 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-01-08 15:23:49 -05:00
Tom Rini
9af51fb3a5 - Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
 - Unnecessary header includes drop into video/meson
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl4V0PgACgkQd9zb2sjI
 SdEuPw//c0APhovWXXCsRckccBF8SK3WRsVcj5M36g7WXVdUo+MXaPzDUEyDAMfU
 xS51FaN7lJJ7ntxEvJ3loFDYh0WrYoanCW+9KxMnJ0GVTdWg6nL0u4yq4exD9f4d
 N9Tv8NaN0y2Jn97Y3L70qlutVJjTzUd1oRKWmGDESvXj3+WrJdffEL0uBrCcbmF/
 kyEQ3RiDuGhfNrC/mSdhQFG2kmeQc43+Fb1OYq8Wm28zwtYvZuJpdn7FTtwGQk0+
 iCjIUN0RKcD+HedJVxHmSnOOTehydk6xQX9215ebo/tTz+WtoqXrFPjEr1mgAhRV
 ojEdJcEKAFGwTYuRDmeO6lwAv+k0fkF4drGi7uAOQa3JwD90aKgR0Ig80CzVq1vW
 m79WDHFbaQnpIGf94kONF8X0M9nWN9/XYmpJe6KuQaO7YEsIIBsbFP657pJp1J1m
 xfwzl2xlx7yaDeR8xv4/N67REuSF/ILeJA0tykkm7NEWkkBrz1d+dXiOaTceY/Wu
 z7s3QGpHINMOzuxMZKEZazt+0KQ4UlbAxYRQU3oNRkW3WaCoGimpbjC9FJa4FpoA
 Cx2PBRunzx8rK87ZS/X7VUa2v454MSkCGwpmqP+PrekoL2rsRNx/3gWHpzb+Z7E/
 nAd0uukYy/WSlzv6bfpRdemQi27gSvDnERf4dj/4kiAiMoKkeiA=
 =rkHZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
- Unnecessary header includes drop into video/meson
2020-01-08 15:23:37 -05:00
Masahiro Yamada
49a7282d76 ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6
The next generation SoC can connect on-board slave devices via
I2C ch5 and ch6.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-09 01:57:05 +09:00
Peng Fan
439321b264 imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support

U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)

CPU:   Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00
Peng Fan
c86987d067 arm: dts: freescale: Add i.MX8MP dtsi support
The i.MX8M Plus Media Applications Processor is part of the growing
mScale family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in Samsung 14LPP to achieve both
high performance and low power consumption and relies on a powerful
fully coherent core complex based on a quad core ARM Cortex-A53 cluster
and Cortex-M7 low-power coprocessor, audio digital signal processor,
machine learning and graphics accelerators.

Add the basic dtsi support for i.MX8MP.

Patch from Anson Huang for Kernel
https://patchwork.kernel.org/patch/11310915/

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Peng Fan
d857a6a697 arm: dts: add i.MX8MP pinfunc header
Add i.MX8MP pinfunc header for dts usage

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Tom Rini
d8a3f5259a New for 2020.04
---------------
 
 - New boards
 	Embedded Artists COM board
 	Xea Board
 - Switch to DM:
 	Aristainetos boards
 	Toradex colibri (DM_ETH)
 	iCubox
 	GE bx50v3
 	mx7dsabre (DM_ETH)
 	cx9020
 - New features:
 	Bootaux with elf files
 	Default SYS_THUMB_BUILD for i.MX6/7
 - Fixes:
 	DHCOM i.MX6 PDK
 	Engicam
 	i.MX8M tools (imx8m_image)
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4UhxIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3MZYMAMEttt0cNxBg0/zBjNuMSn3Bq1lpN+KKsY97
 Cme06wZQdlbdfHhXyKiVfky2vjrZa1nacUgqSQlJdzvsPQbg9TE/8zxTd13BNw6C
 Tn6IHS7godvz9Puf0HD8skoYBpVm/LQKmSEfcPAEGOSnHzZx/MrMU0Qze3PgqWu5
 0xbp8yBsyVw96/zBRZtbwXy4COuS1viFrbf82EgHAZUsmXpgvJB59i8rOewwWNR1
 TpyhPbHlq42X+0Qrwq0RGtUr+t4tI6czlxeReOBgb1/YqJGJ6rEqbGm90XROW3sA
 IeU5PY7LUk8OFRQtyfBSSYgFgFmgOYzfpXe9YSUoIxV55OvCad7ksaRctjPJnKqy
 CndINrG9JnV9T5N0LczAgVFXWT49ybPziyZRDHERDg1XosuHnNk7r0co05uacYUN
 ZFgB21mzQ8qGPAd1C3tMXG05ZA9cdRCmWxKxxF6z2/2FT15euZQ0obwAR1HsiJmZ
 wLbyPl1Hi7ZkwvTT/Wk3se0zGpNj2A==
 =vOZ+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

New for 2020.04
---------------

- New boards
	Embedded Artists COM board
	Xea Board
- Switch to DM:
	Aristainetos boards
	Toradex colibri (DM_ETH)
	iCubox
	GE bx50v3
	mx7dsabre (DM_ETH)
	cx9020
- New features:
	Bootaux with elf files
	Default SYS_THUMB_BUILD for i.MX6/7
- Fixes:
	DHCOM i.MX6 PDK
	Engicam
	i.MX8M tools (imx8m_image)

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07 08:45:43 -05:00
Ley Foon Tan
fb3862823b arm: dts: agilex: Add base dtsi and devkit dts
Add device tree files for Agilex SoC platform.

socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains
Uboot specific DT properties.

socfpga_agilex.dtsi and socfpga_agilex_socdk.dts are from Linux
(kernel/git/dinguyen/linux.git, commit 6f0bf971bacacc)

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:34 +01:00
Ley Foon Tan
dd72cbd9e9 arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes
Add u-boot,dm-pre-reloc for sysmgr and clkmgr nodes to use it in SPL.
In preparation to get base address from DT.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:33 +01:00
Christian Hewitt
b9d5480fdb ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
Import the Khadas VIM3L device-tree from [1]

[1] e42617b825f8 ("Linux 5.5-rc1")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07 11:16:53 +01:00
Michael Trimarchi
b1278a8e3e ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Jagan Teki
f838ebfe5a ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.

With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver

While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY

Similar fix has merged for i.Core MX6Q but missed to update for DL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Jagan Teki
d159b0236b ARM: dts: icorem6: Sync engicam device trees from v5.4
Sync Engicam device tree file from v5.4 linux-next.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Igor Opaniuk
45997eb6c0 ARM: dts: imx7: imx7_colibri: introduce fec node
Sync DTS with the mainline Linux and introduce fec node and
regulator configuration for rn5t567 PMU.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
f9be62a608 ARM: dts: imx6_apalis: introduce fec node
Sync DTS with the mainline Linux and introduce fec node.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
fbcd88095d ARM: dts: imx6_colibri: introduce fec node
Sync DTS with the mainline Linux and introduce fec node.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Joris Offouga
0d52bab462 mx7dsabre: Enable DM_ETH
Also sync device tree with v5.5-rc1
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-07 10:26:56 +01:00
Fabio Estevam
0417ef17ac mx7ulp: Add support for Embedded Artists COM board
The Embedded Artists COM board is based on NXP i.MX7ULP.

It has a BD70528 PMIC from Rohm with discrete DCDC powering option and
improved current observability (compared to the existing NXP i.MX7ULP EVK).

Add the initial support for the board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
ba1444eab6 imx: cx9020: migrate cx9020 to CONFIG_DM_USB
Note: gpio7_8 was never used for usb power regulator so we remove it here

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
9c2b1b0f03 imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Parthiban Nallathambi
d98929d636 imx: sync with kernel device tree for Phycore SoM
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.

Changes includes Phytec naming convention for the devicetree files.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-01-07 10:26:56 +01:00
Claudius Heine
f8420d7c0f ARM: dts: dh-imx6: add u-boot specific wdt-reboot node
The wdt-reboot node is needed for the sysreset_watchdog driver to
register a watchdog as a reset handler in case 'CONFIG_SYSRESET' is
enabled.

Signed-off-by: Claudius Heine <ch@denx.de>
2020-01-07 10:26:56 +01:00
Baruch Siach
281d5e435b arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
These DT files are copied from kernel v5.3 with no changes.

This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and
Hummingboard2 Gate/Edge.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Baruch Siach
730e6a0ca1 arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
These DT files are copied from kernel v5.3 with no changes.

This is part 1 of 2 commits. Included are DT files for the original
Cubox-i and Hummingboard Base/Pro.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
7915e150d6 board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
d494aeca46 board: ge: bx50v3: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
6388f9921a board: ge: ppd: sync device tree from Linux
Copy device tree from linux for PPD.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
8c26739859 board: ge: bx50v3: sync devicetrees from Linux
Copy device trees from linux, keeping them as separate files for
each board to ease future sync.

Update board code to use generic bx50v3 dt initially, then select
the specific dt based on board detection.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Lukasz Majewski
010e58d448 imx: Add support for i.MX28 based XEA board
This patch introduces support for i.MX28 based XEA board.

This board supports DM/DTS in U-Boot proper as well as DM aware drivers
in SPL (u-boot.sb) by using OF_PLATDATA.
More detailed information regarding usage of it can be found in
./board/liebherr/xea/README file.

U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
Trying to boot from MMC1
MMC0: Command 8 timeout (status 0xf0344020)
mmc_load_image_raw_sector: mmc block read error

U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SPI #3, master, 3V3 NOR
Model: Liebherr (LWE) XEA i.MX28 Board
DRAM:  128 MiB
MMC:   MXS MMC: 0
Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
eth0: ethernet@800f0000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
227cb30047 imx6: aristainetos: add support for rev C board
add support for revision C boards. This board has
no longer a NAND.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
c08aa77173 imx6: aristainetos: add aristainetos 2b csl
add aristainetso board version CSL.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
1204b9675e imx6: aristainetos: readd aristainetos 2b board
readd aristainetos 2b board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
ccc7595a81 imx6: aristainetos: prepare dts for other board versions
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.

Collect U-Boot specific changes in separate "*u-boot*" dts
files.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
8fb028ee20 imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model
conversions.

device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"

and added SPDX license identifier.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Tom Rini
5a8fa095cb Merge branch 'next'
Bring in the following merges:

commit 8fbbec12f7
Merge: 87f69f467a 63618e71e8
Author: Tom Rini <trini@konsulko.com>
Date:   Fri Jan 3 09:48:47 2020 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next

    - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support

commit 87f69f467a
Merge: c0912f9bbf 4466b99703
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 24 08:18:19 2019 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next

    - Enable DM driver on ppc/km boards
    - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x,
      T104x, P4080, P2041, P2020, P1020, P3041
    - Some updates in mpc85xx-ddr driver, km boards

commit c0912f9bbf
Merge: 533c9f5714 a1d6dc3f84
Author: Tom Rini <trini@konsulko.com>
Date:   Wed Dec 18 07:20:19 2019 -0500

    Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next

    - Various x86 common codes updated for TPL/SPL
    - I2C designware driver updated for PCI
    - ICH SPI driver updated to support Apollo Lake
    - Add Intel FSP2 base support
    - Intel Apollo Lake platform specific drivers support
    - Add a new board Google Chromebook Coral

commit 533c9f5714
Merge: 553cb06887 033e18b47b
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 17 07:53:08 2019 -0500

    Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next

    i2c: for next
    - misc: i2c_eeprom:
      Add partition support and add ability to query size
      of eeprom device and partitions
    - i2c common:
      add support for offset overflow in to address and add
      sandbox tests for it.

commit 553cb06887
Merge: f39abbbc53 b4f98b3b16
Author: Tom Rini <trini@konsulko.com>
Date:   Thu Dec 12 08:18:59 2019 -0500

    Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next

    buildman improvements including toolchain environment feature
    sandbox unicode support in serial
2020-01-06 17:07:49 -05:00
Lokesh Vutla
196d3e4017 arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03 09:47:10 -05:00
Tom Rini
28aa6dc29a Merge tag 'u-boot-rockchip-20191231' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02 10:28:26 -05:00
Kever Yang
fa2047c473 rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Since mmc to sram can't do dma, add patch to prevent aborts transfering
TF-A parts.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31 15:57:55 +08:00
Kever Yang
3176d47d35 rockchip: px30-firefly add standalone dts
Firefly Core-PX30-JD4 use UART2M1 while PX30 evb using UART2M0, the U-Boot
proper will use the dts setting to do the IOMUX init, and a separate dts
is needed for px30-firefly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27 14:26:13 +08:00
Vabhav Sharma
c1ead04bc4 arm64: lx2160a: dts: Fix UART node status
LX2160A PL011 UART driver fetch IP block values using
platform data from board file instead of device tree.

Modified UART nodes in device tree to disable state.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Diego Rondini
e7c15b7ab8 sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2
Orangepi Zero Plus 2 is an open-source single-board computer, available
in two Allwinner SOC variants, H3 and H5. We add support for H3 variant
here, as the H5 is already supported.

H3 Orangepi Zero Plus 2 has:
- Quad-core Cortex-A7
- 512MB DDR3
- microSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG + power supply

Sync dts from linux v5.2 commit:
"ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry"
(sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b)
Commit:
"ARM: dts: sun8i: h3: Refactor the pinctrl node names"
(sha1: a4dc791974e568a15f7f37131729b1a6912f4811)
has been avoided as it breaks U-Boot build.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-18 20:14:16 +05:30
Hannes Schmelzer
05767707a8 dts: am335x-brsmarc1/xre1: insert phy_id again
commit 3b3e8a37d3
("arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id")

did sync with recent linux kernel and replaced therefore the 'phy_id'
property with a phy-handle pointing to the mdio.

This is OK for linux, but introduces trouble with the already running
vxWorks on this target.

So this commit here re-inerts the phy_id property beside the phy-handle
property to be compatible with both.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-12-13 13:01:12 -05:00
Tom Rini
ac1ca99926 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-net 2019-12-09 13:48:22 -05:00
Vignesh Raghavendra
4886f1cb59 arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Add DT nodes related to DMA and CPSW to -u-boot.dtsi to get networking
up on J721e EVM.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09 09:47:43 -06:00
Nevo Hed
06f555274e arm: dts: armada-cp110-*dtsi: add xmdio nodes
Based on upstream-linux
See https://github.com/torvalds/linux/commit/f66b2aff.

However made the XSMI register window 0x16 (22) bytes per my reading
of the functional spec.  Similar commits in Marvels own repo bump it
to 0x200 (512) bytes but I did not see the reasoning for that.

https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/4d932b4.

Also added device-name attributes to prevent ambiguity in the `mdio`
command.

Signed-off-by: Nevo Hed <nhed+github@starry.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09 09:47:42 -06:00
Grygorii Strashko
5efb69298b arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
The AM654 SoC doesn't allow to disabling RGMII TX internal delay in CPSW2G
MAC. Hence, change CPSW2G interface mode to "rgmii-rxid" - RGMII with
internal RX delay provided by the PHY, the MAC will add an TX delay in this
case.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09 09:47:42 -06:00
Tom Rini
2f02845817 Fixes for 2020.01
-----------------
 
 - imx8qxp_mek: increase buffer sizes and args number
 - Fixes for imx7ulp
 - imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
 - colibri_imx7: reserve DDR memory for Cortex-M4
 - vining2000: fixes and convert to ethernet DM
 - imx8m: fix rom version check to unbreak some B0 chips
 - tbs2910: Disable VxWorks image booting support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3uLqsPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3YEEL/jAKMnREGNHCjvwvxkVVZ7sWHeRtqh+OXb8V
 VnZB0glptth1NDxWyHFZkcsVqjpRlUsm3/lA91xaFXcUB8EWnJMKVReHkB7v0bZW
 zHziN0rNPoTBVocRlpgPXt3zeSOR3Qg+rFesg4zmlXNIVPyvBanpDCxXDK60gdIi
 JDrAdIarP0UMK0roIFLIyvnJ+J/ib1ky1aJI8cdktXb+nSyVrMw5VDdmSBtTCp10
 6o/fJGtWfzXp59a8y9XnnVxNsU2c0URcsswub4fvWhhwJ86xiWGSEfm5Sybql6kS
 6PYjB7jGmdWJjYug7rFthl1Hnn1FULIH9qrxPePtD2ooUUjHPlDmElQqWkHoVlib
 yUAlWG87ZdjhmEMR1iSFlkcBpOD7SlmcvfYZdeedCdtzTwW0kj6lcX9fUKHE+17e
 3SJQtPxpMrVfnUDRn0ciAbwg8+1Tow6sv39j6iYi7jAITny9q16ErdRGup0wB19Y
 tZkmRdnhtjCalrfDoEaRGXZJDE15XQ==
 =L2zo
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191209' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.01
-----------------

- imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support
2019-12-09 10:32:08 -05:00
Marek Vasut
edaec53212 ARM: imx: vining2000: Repair PCIe support
Ever since the conversion to DM PCI, the board was missing the PCIe DT
nodes, hence the PCI did not really work. Fill in the DT nodes and add
missing PCIe device reset.

Moreover, bring the PCIe power domain up before booting Linux. This is
mandatory to keep old broken vendor kernels working, as they do not do
so and depend on the bootloader to bring the power domain up.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Fabio Estevam
2d4b87f867 mx7ulp: Sync the device tree related files
Sync the mx7ulp device tree related files with the one from
NXP U-Boot vendor tree (imx_v2019.04_4.19.35_1.0.0).

The mainline support for i.MX7ULP is very premature at this stage.

We should probably re-sync with mainline Linux dts when it gets
in better shape, but for now sync with the U-Boot vendor code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00
David Wu
aebd9eddb3 dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC
The Firefly ROC_RK3308_CC use ref_clock of input mode,
and rmii pins of m1 group.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
David Wu
982fab393d arm: dts: Add mac node for rk3308 at dtsi level
The rk3308 only support RMII mode, and if it is output clock
mode, better to use ref_clk pin with drive strength 12ma.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
Andy Yan
afe18f205e rockchip: px5: enable spl-fifo-mode for emmc for px5-evb
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 23:53:07 +08:00
Andy Yan
081a51c937 rockchip: rk3308: enable spl-fifo-mode for emmc
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.

And show my best respect to Heiko's work for this solution.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 23:53:07 +08:00
mingming lee
abf2c68566 ARM: MediaTek: add basic support for MT8518 boards
This adds a general board file based on MT8518 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8518 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 12:00:03 -05:00
mingming lee
485627dd5f pinctrl: add driver for MT8518
Add Pinctrl driver for MediaTek MT8518 SoC.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03 08:44:14 -05:00
mingming lee
13e89d7522 ARM: MediaTek: Add support for MediaTek MT8518 SoC
Add support for MediaTek MT8518 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03 08:44:14 -05:00
Patrick Delaunay
4d7d0e2e78 ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1.
- update slew-rate for pin configuration
- update "vqmmc-supply"
- remove "st,sig-dir"
- add mandatory "pinctrl-names"
- add "mmc-ddr-3_3v"

This patch solve the eMMC detection issue for command "mmc dev 1".

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
62d620c243 ARM: dts: stm32: DT alignment with kernel v5.4-rc4
Device tree and binding alignment with kernel v5.4-rc4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
e07a86b5e3 ARM: dts: stm32: DT alignment with kernel v5.3
Device tree and binding alignment with kernel v5.3
and converted to SPDX.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Tom Rini
4b19b89ca4 - add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
 - add support for one binary on RPi3/4
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl3a8R4SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+AfQP/iO4qiJWUsY1WgChKl0wZNnkJKViNu6v
 F7zczCIUyI7krdVb3E3PB/ZJwXY/ay1rQeY91cU/9f0Z3yOlsoiwnEfOT/HwwkmD
 KnS6nhisqL0W1yd8sK8XaLOydIFfe05Do1UvF1JhOl3061R81fdruXygkHlgFXiK
 /hrEXLb9l0Zf4XMSD9hQJZiC/K3qeUZV1KsEdSGArjjTj3kivvS++Z0XD1YZsBVs
 rsEl3ZhPeUmzAxmg26IfyJan02NjWY+MyuoSd8QW5kVGsF4WOgvDuBOY1YJ08C/7
 NhLGkub/XhqHVSaMDwiSoX9d2z7ZqTaw7+IZW38+fCMUFAEHiErqMDq+Zfk1DKCd
 WynOzMj6k+Kli+amHQMHuUqIY54XPwpXdn671C7XbQ8xWh7HhWH/sEHP7ekrSV74
 Et7dy5fcleCcrr8EDhdC5iO2fLKhswq4iT0PbnFMtha4jhPqFVHVaAZDacucJ1/V
 JpfYRkLrmEbva3G1emve80tzlDNDxjraX8G6/6trN+F0xjorcbImp64RtRjgdL62
 DwIuba15BGR18LQJY/yHSHT4h3ReEG5qF9vxX+r6vMiFACZbnBPAP/b/REDQ6LWs
 dwW01JQ343dmZiegBQOe98fRDMGhmTd52mAJ/8p60X+byIh5I4XFKCdEdUpSVBpK
 ARrdtg9vtLxv
 =4Z+A
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-boot

- add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
- add support for one binary on RPi3/4
2019-11-25 12:56:27 -05:00
Matthias Brugger
5051377a0b arm: dts: bcm283x: Rename U-Boot file
Rename the file bcm283x-uboot.dtsi so that it get
automatically include through the scripts/Makefile.lib
using $(CONFIG_SYS_SOC))-u-boot.dtsi

Without this uarts and pincontroller miss the property dm-pre-reloc
and the first call to bcm283x_mu_serial_ofdata_to_platdata() fails
as the pins are not set correctly.
As a result the U-Boot banner isn't shown on boot.

Before commmit
143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state")
we included bcm283x-uboot.dtsi directly in the device-tree file.
Which got deleted by the metioned commit.
This is a much robuster solution.

Reported-by: Tom Rini <trini@konsulko.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tom Rini <trini@konsulko.com> [RPi 3, 32b and 64b modes]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24 10:46:27 +01:00
Matthias Brugger
89e47e8eb6 fdt: fix bcm283x dm-pre-reloc definitions
In commmit
143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state")
we deleted the label for the node soc from bcm283x.dtsi

As we don't need to add the property dm-pre-reloc to the soc node,
we can delete it from bcm283x-uboot.dtsi

Tested-by: Tom Rini <trini@konsulko.com> [RPi 3, 32b and 64b modes]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24 10:46:27 +01:00
Tom Rini
9a0cbae22a Merge tag 'u-boot-rockchip-20191124' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Clean vid/pid in Kconfig and add fastboot for rk3399
- add 'u-boot, spl-fifo-mode' for mmc
- Use FIT generator for rk3229 optee and rk3368 ATF
- fan53555: add support for Silergy SYR82X and SYR83X
2019-11-23 20:50:11 -05:00
Heiko Stuebner
8019d32c47 rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb
As part of loading trustedfirmware, the SPL is required to place portions
of code into the socs sram but the mmc controllers can only do dma
transfers into the regular memory, not sram.

The results of this are not directly visible in u-boot itself, but
manifest as security-relate cpu aborts during boot of for example Linux.

There were a number of attempts to solve this elegantly but so far
discussion is still ongoing, so to make the board at least boot correctly
put both mmc controllers into fifo-mode, which also circumvents the
issue for now.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-11-23 23:41:44 +08:00
Ooi, Joyce
0c14bb5ad3 arm: socfpga: stratix10: Add alias for gmac0 in S10 dts
Add 'ethernet0' as alias for 'gmac0' in S10 device tree.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Ooi, Joyce
7dad444c76 arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver
The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA
drive strength has caused CE test to fail. This requires changes on the
pad skew for EMAC0 PHY driver. Based on several measurements done, Tx
clock does not require the extra 0.96ns delay which was needed in
Arria10.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Ley Foon Tan
9184590d9a arm: dts: Stratix10: Fix memory node address and size cells
Add #address-cells and #size-cells to memory node to fix incorrect memory
size decoding in recent Uboot version.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Tom Rini
fffb826ea0 - fix i.MX6ULL evk black screen observed while reboot stress tests
- remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree
   differences between Linux and U-Boot for stm32mp1 platform
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXdJyOg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXOmuAJ9lF7GyPpv0vZNX1V4UV2EyyOOdbwCfQzHu3Xo+
 3VWLV9ZHkVMlfnGbbx0=
 =+YuG
 -----END PGP SIGNATURE-----

Merge tag 'video-for-v2020.01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix i.MX6ULL evk black screen observed while reboot stress tests
- remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree
  differences between Linux and U-Boot for stm32mp1 platform
2019-11-18 10:48:29 -05:00
Tom Rini
d64efd920e Merge tag 'u-boot-rockchip-20191118' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip SoC: PX30, RK3308
- Add and migrate to use common dram driver: PX30, RK3328, RK3399
- Add rk3399 board Tinker-s support
- Board config update for Rock960, Rockpro64
2019-11-17 21:15:57 -05:00
Michael Trimarchi
59b01eb7a1 rockchip: dts: tinker: Add tinker-s board support
Support tinker-s board. The board is equivalent of tinker board
except of emmc.

TODO:
- support of usb current burst when the board is powered from pc

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 18:51:25 +08:00
Michael Trimarchi
b40abe3369 rockchip: dts: tinker: Move u-boot dmc initialization to specific section
dmc is used to initialize the memory controller. It's needed by
u-boot. Move it in the specific section

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 18:51:25 +08:00
Andy Yan
9ce3de1b18 rockchip: rk3308: Add dts for ROC-RK3308-CC
Add dts file for ROC-RK3308-CC from firefly.

Sync form linux rockchip for v5.5-armsoc/dts64:
"arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc"
(sha1: 4403e1237be3af0977aa23ef399e3496316317a0)

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Andy Yan
22dcd28150 arm: dts: rockchip: Add dts for rk3308 evb
Add dts for rk3308 evb, sync from the linux kernel
upstream list [0].

[0]https://patchwork.kernel.org/patch/11201555/

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
7acd030210 rockchip: rk3399: orangepi: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
4d273ff304 rockchip: rk3399: khadas-edge: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
8dda40ec51 rockchip: rk3399: rock-pi4: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
f9f68ea747 arm64: dts: rk3399-rock960: add vdd_log and its init value
Add vdd_log node according to rock960 schematic V13.
This patch affect two boards:
- Rock960 Model A
- Ficus

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-11-17 17:22:53 +08:00
Peter Robinson
267b6adf63 rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi
The u-boot specific device tree directives should be in u-boot.dtsi

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Peter Robinson
e7505d06bd rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi
The u-boot specific device tree directives should be in u-boot.dtsi

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Peter Robinson
f459e23ec0 rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi
The u-boot specific pieces in the dts files should be in u-boot.dtsi
not the main files, this allows easier sync with upstream. The
rk3399.dtsi has a mix of both so move them all for consistency.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Fix with missing pmugrf)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Soeren Moch
f210cbc1f3 arm: dts: rk3399-rockpro64: slightly increase center voltage
The rk3399 VD_CENTER voltage domain is not subject to dynamic voltage
scaling. So the regulator reset voltage of 0.9V is used on this board.
Let u-boot initialize the center voltage to 0.95V as it is done for the
VD_LOGIC domain. This avoids instability and occasional linux kernel
Opses on this board.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Soeren Moch
5824ad3453 arm: dts: rk3399-rockpro64: sync dts from linux kernel
The most important change for u-boot is the fix for the vdd-log pwm
voltage regulator to avoid overvoltage for the VD_LOGIC power domain.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Jagan Teki
37f4e531d7 arm: dts: rk3399-roc-pc: Sync latest dts changes from Linux
Few important regulator power rails fixes are available in
linux-next, so sync them same.

Here is the last commit details:
commit <9f7f9b610e1b7d2dc86c543ab0dfcf781bd42326> ("arm64: dts:
rockchip: Fix roc-rk3399-pc regulator input rails")

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Heiko Stuebner
537b1a2774 rockchip: add px30 devicetrees
Add px30 related devicetrees synced from the Linux kernel.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:23:20 +08:00
YouMin Chen
a922d0d102 ram: rk3399: migrate to use common code
For there are some structures and functions are common for all rockchip SoCs,
migrate to use the common code so that we can clean up reduandent codes.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 16:23:56 +08:00
YouMin Chen
ca93e32139 ram: rk3328: use common sdram driver
RK3328 has a similar controller and phy with PX30, so we can use the
common driver for it and remove the duplicate codes.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 16:23:56 +08:00
Baruch Siach
70bae02f71 arm: mvebu: clearfog: fix boot from SD card
Enable gpio0 in SPL to allow the sdhci driver read the SD card-detect
signal.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-11-14 08:28:39 +01:00
Patrick Delaunay
754815b854 video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support
Remove the compatible "synopsys,dw-mipi-dsi" added in U-Boot
(it don't exist in Linux kernel binding); it is only used
to bind the generic synopsys UCLASS_DSI_HOST "dw_mipi_dsi" to
the driver "stm32-display-dsi" UCLASS_VIDEO_BRIDGE

This binding is done in Linux kernel drivers without compatible
(dw_mipi_dsi_bind() is called in bind of driver, for example in
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c).

This patch does the same in U-Boot driver, the STM32 driver
calls during its bind the function device_bind_driver_to_node
to bind the generic driver "dw_mipi_dsi" at the same address.

This patch reduces the device tree differences
between Linux kernel and U-Boot for stm32mp1 platform.

Tested with v2020.01-rc1 on STM32MP157C-EV1 and STM32MP157C-DK2.

The dependency of driver is clearer and the probe order is guaranteed.

STM32MP> dm tree
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 root          0  [ + ]   root_driver           root_driver
 sysreset      0  [   ]   syscon_reboot         |-- reboot
 simple_bus    0  [ + ]   generic_simple_bus    |-- soc
 serial        0  [ + ]   serial_stm32          |   |-- serial@40010000
...
 video_brid    0  [ + ]   stm32-display-dsi     |   |-- dsi@5a000000
 dsi_host      0  [ + ]   dw_mipi_dsi           |   |   |-- dsihost
 panel         0  [ + ]   rm68200_panel         |   |   `-- panel-dsi@0
...

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-12 16:15:53 +01:00
Tom Rini
5f7ff6d63e u-boot-imx-20191105
-------------------
 i.MX8MN SoC support
 ROM API image download support
 i.MX8MM enet enabling
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3BmLkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3oVwL/2Z7kCMCjudXNjXqJFSVsCizuzaxkYvUDQCK
 g8+P7pdci/xZz8pVvVD5zmpZGRM2hu+7hFQwIlSu7anlRqdW+9cZCAJoeq/4A29c
 TkI3w99R0xTDGFlip0zM4vKlQXmC0I0LYbJPVDLjN+zNkhL6QNS3QptONw/3xPzr
 Vj5+eztasl5JOnkTFE8yZkfbkekgPbO4h43oje5XwRdRQcwzo4qEFZcxZzvucz39
 0RXyvu5qtXvSeVYApXeYcnBD3Mn4rjq26rfn2EEntkO0FbhYBHBjwx3/ozmUaOFR
 7AtNyZZSAZFe03egfX6+ODx7tuOTA0PK1LLdogMjLDrOd70px+P7wxY9QZV6hKw9
 TC4YlboZK2bjsPyOwIraTWVUvU9YjQzlPT0SYjyIono33Av1Um7RDvp+XeyG7VPC
 AYE6luZwhauYNUaGegFPexDxOSRqeAiTLx3kOOeHb4Vb4KkJu4Np7Pma2uiqI00V
 4TpWJwhqQPn7lo/N1X9ymBx6iNvt2Q==
 =sgCz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191105
-------------------
i.MX8MN SoC support
ROM API image download support
i.MX8MM enet enabling
2019-11-12 07:18:23 -05:00
Tom Rini
086e391bc4 Merge tag 'u-boot-rockchip-20191110' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip pmic rk805,rk809, rk816, rk817
- Add rk3399 board Leez support
- Fix bug in rk3328 ram driver
- Adapt SPL to support ATF bl31 with entry at 0x40000
- Fix the u8 type comparision with '-1'.
- Fix checkpatch warning for multi blank line and review signature.
2019-11-11 14:19:32 -05:00
Tom Rini
0b73ef0c02 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC.
- Few bug fixes and updates related to SPI, hwconfig, ethernet,
  fsl-layerscape, pci, icid, PSCI
2019-11-11 14:19:04 -05:00
Emmanuel Vadot
b5500b2057 rockchip: dts: rk3328: rock64: Add same-as-spl order
rk3328 can use same-as-spl option so next loaders are loaded from the same
medium.
Add the boot order in the rock64 dts otherwise booting from sdcard
will result in u-boot looking into the eMMC.

Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Andy Yan
a4bbc662fc rockchip: rk3399: Add Leez P710 support
Specification
- Rockchip RK3399
- LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply

Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1:
"arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
(sha1: 	fc702ed49a8668a17343811ee28214d845bfc5e6)

Signed-off-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Tom Rini
ee1c499851 Merge branch '2019-11-07-master-imports'
- Add Phytium Durian Board
- Assorted bugfixes
- Allow for  make ERR_PTR/PTR_ERR architecture specific
2019-11-08 07:27:45 -05:00
Mathew McBride
b50fe3fb7e armv8: dts: ls1088a: add PSCI binding for LS1088A
This allows the use of PSCI calls to trusted firmware to
initiate reset and poweroff events with CONFIG_PSCI_RESET and
CONFIG_ARM_PSCI_FW. This is desirable, for example, if the target
board has implemented a custom reset or poweroff procedure in EL3.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Adam Ford
899836c315 ARM: dts: logicpd-som-lv-37xx-devkit-u-boot: Remove unused GPIO
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.

This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Adam Ford
1e3d015a03 ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Remove unused GPIO
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.

This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Keerthy
2f71498d52 arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supply
Hook buck12_reg to vtm avs supply

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
0f63ceaf54 arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 node
Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
69eceae870 arm: dts: k3-j721e-r5-common-proc-board: Add VTM node
Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
56adc6615f arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in supplies
Link the vdd-supplies for the voltage domains under the VTM node. Also,
enable the node under SPL. This will enable the AVS class 0 support on
am65x-evm board.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
c5f73d1c9f arm: dts: k3-am654-r5-base-board: add supply rail for MPU
MPU voltage on AM65x-evm is controlled via the TPS62363 chip attached
to i2c0 bus. Add device node for this so that it can be controlled via
a regulator driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
4bbb3849aa arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for spl
Enable wkup_i2c0 as this is needed for voltage control.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
cfa6bd549c arm: dts: k3-am654-r5-base-board: Add VTM node
Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Peng Fan
bdcf3a88cc imx: imx8mm-evk: enable ethernet
add phy-reset-gpios to reset phy
Add board_phy_config to configure phy
Enable DM_ETH

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
98bcf9a5df arm: dts: imx8mm: drop assigned clocks for clk node
Drop assigned clocks for clk node, this will break boot on i.MX8MM EVK
board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
d239d9d946 imx: add i.MX8MN DDR4 board support
Support pinctrl/clk/sdhc, include ddr4 timing data.

Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)

CPU:   Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM:  2 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
dadb072f12 imx: add dtsi for i.MX8MN
Add dtsi for i.MX8MN

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
2634ba5743 arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL
is enabled. Since uclass power domain is also enabled, to make
lpuart work properly, need add u-boot,dm-spl for lpuart power domain
and its parent.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
c1a64dccc0 arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL
is enabled. Since uclass power domain is also enabled, to make
lpuart work properly, need add u-boot,dm-spl for lpuart power domain
and its parent.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
84abc8d533 imx8qm: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Tom Rini
73b6e6ad25 u-boot-imx-20191104
-------------------
 
 - i.MX NAND: nandbcb support for MX6UL / i.MX7
 - i.MX8: support for HAB
 - Convert to DM (opos6ul, mccmon6)
 - Toradex i.MX6ull colibri
 - sync DTS with kernel
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2/6YYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3qSAL/37iSxotpJEcvCcAg0x96n6na/O0SjT3NkoT
 glPaFXLkzR7hbK5yR3g2P0LuNGRGkCQbuz61Hn4wNLRySVodvIJ1pUITu9GaLnex
 graG/ssqdPMEWU0LDoatr/fgoCQo7DEKOuzRmvHAYus7LZJ6edctOyTXuiMhPZ+T
 DJ51RAUq11CleuA8nnz/iV2WCR8pw9sPS7P016lrDF+sWLIqm+/UMnwiIUV4KVhI
 og/fevJfE52vOdV1the6xgpffQGICckNUFREgXaPo3JsP67icPiUGQ4RiFhHp+ff
 rNyMdD/g6YZOoMoWda989h0l3gBwKjBQ9eGG05V8GEmyxzzkOGa5So2O9NzG90CQ
 vcOlEsC/siNZ87B5VkVkWjmrEnHcICtAFJSSntC7pLxtQMMqMbioRe5w+zmSrWeH
 GYh9cxe3ABLYBxISrT6BTfyXs0cD5tMl6D9snLaGyUzHcH2AGkVTkVabemuMSpIZ
 kBzNRFmx3+3Ync+CoaLA+G1YRXmgSw==
 =zlN+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191104' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191104
-------------------

- i.MX NAND: nandbcb support for MX6UL / i.MX7
- i.MX8: support for HAB
- Convert to DM (opos6ul, mccmon6)
- Toradex i.MX6ull colibri
- sync DTS with kernel

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04 12:57:41 -05:00
Oliver Graute
eef72440db imx: support i.MX8QM ROM 7720 a1 board
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00
Peng Fan
387c44904d arm: dts: imx8mm: sync dts from Linux Kernel
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 21:18:00 +01:00
Hannes Schmelzer
c04ac5bd40 board/BuR/brppt2: initial commit
This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03 21:17:55 +01:00
Peng Fan
8c61eba03d imx8mm: evk: enable bd71837 pmic
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for
DRAM and linux suspend voltage requirement.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b1be79b417 opos6uldev: migrate to DM_VIDEO
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Patrick Wildt
05737f3585 imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
8e64181a99 ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
f6a4df3846 imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
6b4339d312 ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Add u-boot,dm-pre-reloc properties for uart pinmux configuration
nodes, which enables UART as early as possible (before relocation).

Without this we miss almost the half of output (U-boot version,
CPU defails, Reset cause, DRAM details etc.).

Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
7d6ca12313 ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Introduce imx6ull-colibri-u-boot.dtsi for u-boot specific properties to
keep original imx6ull-colibri.dts in sync with Linux.

Move all contents of imx6ull-colibri.dts to imx6ull-colibri.dtsi +
additionally fix checkpatch warnings.

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Manivannan Sadhasivam
7f8a6a66af arm: dts: Add devicetree support for iMXQXP AI_ML board
Add devicetree support for iMXQXP AI_ML board from Einfochips.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Grygorii Strashko
3b3e8a37d3 arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Felix Brack <fb@ltec.ch>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-11-03 09:15:46 -05:00
Grygorii Strashko
b1fe4fe330 arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03 09:15:46 -05:00
Grygorii Strashko
68d875da4c arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03 09:15:46 -05:00
Tom Rini
cc64810dc6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- H6 dts(i) sync (Clément)
- H6 PIO (Icenowy)
- Fix pll1 clock calculation (Stefan)
- H6 dram, half DQ (Jernej)
- A64 OLinuXino eMMC (Sunil)
2019-10-30 09:04:52 -04:00
Tom Rini
15147dc6a9 Merge branch '2019-10-24-ti-imports'
- Enable DFU on dra7xx boards
- Further Keystone 3 platform improvements
2019-10-25 17:33:28 -04:00
Suman Anna
d0e134b909 arm: dts: k3-am65: Add R5F ranges in interconnect nodes
Add the address spaces for the R5F cores in MCU domain to the ranges
property of the cbass_mcu interconnect node so that the addresses
within the R5F nodes can be translated properly by the relevant OF
address API.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Lokesh Vutla
ec2fa9f76e arm: dts: k3-j721e: Add ddr node
Use the 3733MTs DDR configuration that is auto generated from
DDR_Regconfig tool.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2019-10-25 17:33:21 -04:00
James Doublesin
34f27b2e86 ram: k3-am654: Do not rely on default values for certain DDR register
Added the following registers to the DDR configuration:
- ACIOCR0,
- ACIOCR3,
- V2H_CTL_REG,
- DX8SLxDQSCTL.

Modified enable_dqs_pd and disable_dqs_pd to only touch the associated
bit fields for pullup and pulldown registers (to preserve slew rate and
other bits in that same register). Also update the dts files in the same
patch to maintain git bisectability.

Signed-off-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
James Doublesin
d5e08fd204 armv7r: dts: am654-base-board: Rename 1600MHz to 1600MTs in dtsi filename
The current configuration of DDR on AM654 base board is for 1600MTs but
the file name is specified as k3-am654-base-board-ddr4-1600MHz.dtsi.
Since 1600MHz is misleading, rename it to
k3-am654-base-board-ddr4-1600MTs.dtsi

Signed-off-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Faiz Abbas
6b23f53b08 ARM: dts: dra7: Add usb peripheral nodes in spl
Add usb peripheral and usb phy nodes in spl to enable SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-25 17:33:21 -04:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
c9e50bb12a Second set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdspnqAAoJEB6zHgIOrC/Ixi4IAJEEiCZPu6Z3fbkFX/Um7vCX
 eMTltJN8nz4oiSi3xdx3ejueqWdW3F8VuCkHb0j0bVAhMlUlVgwCzfd0cD+D2iwS
 jkrgzASNAr+JeYKYEdWqqfaUxOCd2qfuBu9EXlpvKQLWLt+KRfsOsHWcgR4bf095
 aGCihvd/fKhKYUvbf5cEQnsWa3UwtsKk4Web5MKjxXx3p0iVNlu4KLd/vDWfTios
 X1NqiO5ZjXNrDxyG6Aj8lgDXlE5kfeKaN/aCJU1/0U2cXm8JRu2w2dv1P/e/kU+j
 NHIGzICAG4Lk/4gQTeuohJxLyvj7K3i1H12ik9Qeh4H1/5fsyybyltGUo7H443s=
 =JYe3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2020.01 cycle

This feature set includes Eugen's work on a new tiny flexcom driver and
eeprom mac retrieval for the sam9x60-ek board.
2019-10-25 13:50:33 -04:00
Tom Rini
e382713d22 Xilinx/FPGA changes for v2020.01 part 2
common:
 - Fix manual relocation for repeatable commands
 
 arm:
 - Also clean up generated dtbos
 
 microblaze:
 - Add support for Manual relocation in crypto framework
 - Tune and align architecture bootm support
 
 zynq:
 - DT sync ups
 - Some defconfig updates
 - Remove empty board_early_init_f()
 
 zynqmp:
 - Clean firmware handing via drivers/firmware/
 - DT/defconfig name alignments
 - DT cleanups with using firmware based clock driver
 - Some defconfig updates
 - Add IIO ina226 DT description
 - Tune zynqmp_psu_init_minimalize.sh script
 - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216
 
 versal:
 - Clean firmware handing via drivers/firmware/
 - Add gpio support
 - Enable DT overlay/USB/CLK/FPGA
 - DT updates
 - Tune mini configuration
 
 spi:
 - gqspi - Remove unused headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXbKa4QAKCRDKSWXLKUoM
 ISzJAJ0YpGS7HziGFVRBlcsyRH8QlWCqOQCfb0jIWzhL8pvj9TA01CdU0Axdbwk=
 =GIpp
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01 part 2

common:
- Fix manual relocation for repeatable commands

arm:
- Also clean up generated dtbos

microblaze:
- Add support for Manual relocation in crypto framework
- Tune and align architecture bootm support

zynq:
- DT sync ups
- Some defconfig updates
- Remove empty board_early_init_f()

zynqmp:
- Clean firmware handing via drivers/firmware/
- DT/defconfig name alignments
- DT cleanups with using firmware based clock driver
- Some defconfig updates
- Add IIO ina226 DT description
- Tune zynqmp_psu_init_minimalize.sh script
- Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216

versal:
- Clean firmware handing via drivers/firmware/
- Add gpio support
- Enable DT overlay/USB/CLK/FPGA
- DT updates
- Tune mini configuration

spi:
- gqspi - Remove unused headers
2019-10-25 11:23:46 -04:00
Clément Péron
cf05b4b86c arm: dts: sync dts for Allwinner H6
Sync Kernel DTS for Allwinner H6 boards.

Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.

commit <d45331b00ddb> Linux 5.3-rc4

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 14:40:25 +05:30
Sunil Mohan Adapa
4ed293ae79 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.

The Linux kernel upstream has chosen to create and use a separate device tree
for the eMMC variants instead of adding eMMC support existing device tree. These
changes to Linux kernel are queued for Linux 5.4.

commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts:
allwinner: a64: Add A64 OlinuXino board (with eMMC)")

This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux
device-tree and a64-olinuxino_defconfig.

Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
[jagan: updated linux-next commit details]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 14:15:49 +05:30
Jagan Teki
f8cb77ffba configs: sopine-baseboard: Enable SPI-FLASH
SoPine has winbond SPI-FLASH, so enable the same in defconfig
and add aliases for spi0 in -u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Tom Rini
17fd9915a4 Merge branch '2019-10-24-UFS-support'
- Add Universal Flash Storage (UFS) support
2019-10-24 09:51:48 -04:00
Michal Simek
6bf27ed9ae arm64: zynqmp: Add support for e-a2197-00 System Controller
Add support for System Controller available on e-a2197-00 base board.
System is very similar to p-a2197-00 board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
dd7a3291cc arm64: zynqmp: Add support for zcu216
zcu104/6 defconfig was used as source. Standard features are enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
3d5c9060c5 arm64: zynqmp: Add support for m-a2197-03
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
137c4aef0c arm64: zynqmp: Add support for m-a2197-02
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
2038e46f48 arm64: zynqmp: List lpd watchdog in dtsi
There are use cases where lpd watchdog can be configured for APU use. By
design this IP should be listed in zynqmp.dtsi to make sure that node is
properly enabled by DTG.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
332996ce18 arm64: zynqmp: Use power header in zynqmp.dtsi
Use power header and add power-domains property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
b07e97b4ba arm64: zynqmp: Use reset header in zynqmp.dtsi
Wire reset-controller and use macros from reset header.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
dead6f67c7 arm64: zynqmp: Use backward compatible string for gem
Add backward compatible string for gem ("cdns,gem").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
039c740d66 arm64: zynqmp: Switch to xlnx-zynqmp-clk header
Use prepared header instead of hardcoded values.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Naga Sureshkumar Relli
c3a34b8006 arm64: zynqmp: Update nand device tree node properties
This patch updates the nand device tree node properties as per
updated driver.

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
631ed92a30 arm64: zynqmp: Fix DT style for ipi mailbox
Remove additional empty space.

Fixes: 95497afada ("arm64: zynqmp: add firmware and mailbox node to DT")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
62e3fb027b ARM: dt: Also clean dtbo files
dtbo files can be also generated that's why also clean them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
c126ba4f43 arm64: versal: Fix sdhci node address for versal-mini-emmc1
Add missing trailing 0 to mach node name address with reg property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
f5c48644ba arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
db2d622cb2 arm64: zynqmp: Turn comment to gpio-line-names
Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
003170e74d arm64: zynqmp: Add label property to all ina226 on zcu102
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
faddcbe7d7 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
26b2c68b61 arm64: zynqmp: dt: Add optional gpio phy reset properties
Add gpio phy reset via I2C expander TCA6416 on board ZCU102.
A warning call trace is observer in probe when this reset is called
from context that can sleep. Keep this commented until that is
resolved in phylib.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
631d9a9981 arm64: zynqmp: dt: Add missing DP83867 quirk
The DP83867 strap control workaround is already present in Linux kernel
mainline binding. All these Xilinx boards require this quirk.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
0ae57b34f0 arm64: zynqmp: Enable fpd_dma for zcu104 platforms
Enable fpd_dma for these boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
3d82d7167f arm64: zynqmp: Enable iio-hwmon for ina226 on zcu104
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
5c09709475 arm64: zynqmp: Add label property to all ina226 on zcu106
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
777c4d69cb arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Venkatesh Yadav Abbarapu
7e2bf38768 arm64: zynqmp: Fix the si570 clock frequency on zcu111
The si570 clock frequency should be 156.25MHz as per datasheet.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
b02ea93137 arm64: zynqmp: Add label property to all ina226 on zcu111
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
65c4c3773b arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
T Karthik Reddy
bdbc5604f2 arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0
Currently zcu102 Rev1.0 board includes RevA sdhci dt node which has
no-1-8-v property. Since Rev1.0 has level shifters delete this
property to enable support for 1.8v.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
5dc8f69df3 arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197
System controller has 2GB of memory and fixme can be removed now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
bdd368afda arm64: zynqmp: Sync si570 setup and clock names
Setup proper si570 names and default factory setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
2703d4b42d arm64: zynqmp: Fix m-a2197-01 DT based on latest schematics
Remove some FIXMEs and align it with latest schematics.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
b954e88968 arm64: zynqmp: Switch spi-flash to jedec,spi-nor on m-a2197
Mainline has done this switch and there is no reason not to switch it too.

Mainline U-Boot patch which has done that switch:
"dts: switch spi-flash to jedec, spi-nor compatible"
(sha1: ffd4c7c2ec)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
33aaa0932e arm64: zynqmp: Add label property to all ina226 on m-a2197-01
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
eaf96b1edd arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
e0c08238e9 arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revA
Trivial fix but not detected by checkpatch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Nishant Mittal
ebb28f2d30 arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boards
Added tps53679 compatible string to tps53681. They are both compatible to
each other and tps53679 has Linux driver already.

Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Nishant Mittal
74ef6207ab arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 board
tps53681 is i2c address 0x60 not 0xc0.

Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
209c04e5a9 arm64: zynqmp: Add label property to all ina226 on g-a2197-00
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
ae7677edb7 arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
2975a42b42 arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
50d9283347 arm64: zynqmp: Sync names for SC with Versal
ZynqMP based System controller is present on Versal boards. This patch is
aligning names with Versal to follow the spec.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
233750d3a1 ARM: zynq: Add missing pl353-smc node
DT binding was reviewed in Linux by commit b0b41af12a1b
("dt-bindings: memory: Add pl353 smc controller devicetree binding
information") that's why this fragment can be also added to U-Boot
repository.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Eugen Hristev
67fd5d85d1 ARM: dts: sam9x60ek: add i2c0 as flexcom0 subnode and eeprom memory
Add i2c0 bus as subnode to flx0.
Add eeprom memory as slave device to i2c0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Eugen Hristev
2d604ed852 ARM: dts: sam9x60: add flx0 node
Add node for Flexcom0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Jean-Jacques Hiblot
78830364b8 ARM: DTS: keystone: complete the description of the USB PHY devices
As the PHY driver now handles the transitions of USB power domain, we
must add this information in the node of each PHY.
Also, the phy are expected in the "phys" property, not "usb-phys".
Also add the aliases for the USB ports on boards with more than a single
port.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Vignesh Raghavendra
02e262c249 arm: dts: k3-j721e-som-p0: Add HyperFlash node
J721e SoM as a 64MB HyperFlash on board. Add pinmux and DT node for the
same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24 09:49:22 +02:00
Vignesh Raghavendra
358032f9a5 arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node
Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not
possible to use OSPI0 and HBMC simultaneously as they are muxed within
the Flash Subsystem hence disable HBMC by default as keep OSPI enabled.
Bootloader will fixup DT when it detects HyperFlash instead of OSPI.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24 09:49:16 +02:00
Faiz Abbas
991e8a5ab8 arm: dts: k3-j721e-main: Add UFS nodes
Add TI UFS glue layer and Cadence UFS Host controller DT nodes.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Neil Armstrong
21cd92faa5 ARM: dts: meson-sm1: add U-Boot specific DT for graphics
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to
match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi
to handle the U-Boot specific DT for graphics.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:40:32 +02:00
Neil Armstrong
5be4afe15f ARM: dts: Import SEI610 DT from Linux 5.4-rc2
Import the Amlogic SM1 DT and the SEI610 board DT from [1]

[1] da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:29:59 +02:00
Andreas Färber
1a87cc7891 arm: dts: Import and update DT for Khadas VIM3
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes
and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Copied from da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 11:57:00 +02:00
Neil Armstrong
ce9fa7bffc ARM: dts: meson-g12a: add U-Boot specific DT for graphics
Like the meson-gx support, add the U-Boot specific bits in DT
to support graphics on G12A SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18 11:51:22 +02:00
Tom Rini
6891152a45 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- vining_fpga updates
2019-10-14 21:00:10 -04:00
Tom Rini
6f1f28b8e1 u-boot-imx-20191014
-------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628
 
 	- logicpd pinmux
 	- i.MX7ULP: imx_ddr_size
 	- fixes Toradex i.MX6/i.MX7
 	- pico-imx7d
 	- tpc70 converted to DM
 	- New Board: meerkat96
 	- add HAB version command
 	- i.MX8 :
       		imx8: Jump from alias to OCRAM address at SPL init
       		imx8qm/qxp: Set SPL TEXT base to OCRAM base
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2kbrYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30iQL/RDCe3R1MuQPQdjBEUcb+ZXP8/vaAAbgAsv6
 MNN/ybJ8pIXGVF5qxJxzZgMcUvIq1vy8romomIwVBOr7gueoYMokpKeE95P4XK2r
 HmFM+/ZcXIXvDrHrULDquAvCG6zhOMHXdbmWcQcZLcHSCsZpkh4YuuGzFVpxTgNE
 kTJpEF+Orw49w9wMVKeqfv9z3MsYkr/vV3kH/+ISndN6cOBOjV56Qzl/hlzxiN1d
 wueTQi1pxUVjbsKWIkf76XTeSa5621bM01+YMN3CFq/AWhVMbpnaWWGB6ET4NBjD
 k/BjRgCZ+/hwjpHnbylHEmsLolNsIXn8KirE73OCmIvov/vUYaaZJ5lBzU+L2A5k
 tK6p1LOTvsRxKBsN49hQIQLJMcn/sp9RpP9ohgCs3lj7bKGAQ1HoxqylypeDGPv1
 htKGdBFGiEfoCus1Ob7NAevYAPlVM7h+mDzFSYhlr9BZnrDj2V3nwICj8KV3wkwl
 lPiUQiYMUhgvSSSiU2NJDSy1onjSXA==
 =J8jd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191014' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191014
-------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628

	- logicpd pinmux
	- i.MX7ULP: imx_ddr_size
	- fixes Toradex i.MX6/i.MX7
	- pico-imx7d
	- tpc70 converted to DM
	- New Board: meerkat96
	- add HAB version command
	- i.MX8 :
      		imx8: Jump from alias to OCRAM address at SPL init
      		imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14 13:00:51 -04:00
Yannick Fertré
aa37506bd3 ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:25 +02:00
Yannick Fertré
b49711f0c0 ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:14 +02:00
Yannick Fertré
30173bacdd ARM: dts: stm32f769: add display for STM32F769 disco board
Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:01 +02:00
Lukasz Majewski
62cef35bb0 imx: dts: Add u-boot specific set of device tree properties for tpc70
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot
specific properties for imx6q KP device.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
f1a46398f0 imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
This commit defines the TPC70 imx6q board with device tree description.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Adam Ford
2881ec544d ARM: imx6q_logic: Enable Pin muxing in SPL
With the 256KB of OCRAM available to SPL now, there should be
enough room to enable the pinmuxing in SPL from the device tree.

This patch enables SPL_PINCTRL et al and adds the serial and
usdhc pin mux references to the -u-boot.dtsi file so the pins can be
configured from the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13 22:49:11 +02:00
Soeren Moch
dc6c8fb84e ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3
Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Shawn Guo
ad61658dd6 ARM: dts: import meerkat96 board support
It imports device tree source of meerkat96 board from Linux Kernel.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-10-13 22:49:11 +02:00
Tom Rini
0c9cc5155c Merge branch '2019-10-11-master-imports'
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
2019-10-12 10:10:59 -04:00
Lokesh Vutla
fbbcb1e020 arm: dts: k3-j721e-common-proc-board: Mark main_uart0 as shared device
Main uart0 is used as debug console by both R5SPL and A72 bootloader and
Linux. So mark it as shared device so that power-domain request is
successful by both cores.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
752a45a153 board: ti: am335x-ice: Configure the CDCE913 clock synthesizer
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
9850d4e52f board: ti: am43xx-idk: Configure the CDCE913 clock synthesizer
AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
e8e683d33b board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Moses Christopher
51d4e47afa am335x, guardian: adapt guardian board to DM
- update partition table - remove env partitions
  - dts: add new interfaces (uart2, extra gpio-key)
         remove unneeded entries
         update nand timings for performance improvement
  - defconfig: adapt configurations to suit DM
               remove unneeded configs
  - am335x_guardian.h: remove mmc boot

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-11 13:31:18 -04:00
Ryder Lee
898cc1365c arm: dts: split mtk-reset.h into per-chip header
This follows the linux header rules to avoid conflict bitfields.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Ryder Lee
625137da44 arm: dts: add PCIe controller for MT7623 SoC
This adds PCIe and its PHY nodes for MT7623.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Philippe Reynes
05e93b3a13 dt: bcm968580xref: add a spi-nor device
This commit add a spi-nor device in the bcm96850xref device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-10-11 10:09:16 -04:00
Philippe Reynes
906af4a72b dt: bcm6858: add hsspi controller
This commit add a hsspi controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-10-11 10:09:16 -04:00
Kursad Oney
ce9e2eedda dt: bcm963158: add a spi-nor device
This change adds a spi nor flash device to the bcm963158 board.

Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-11 10:09:16 -04:00
Kursad Oney
b2983d1f6d dt: bcm63158: Add hsspi controller
This change adds the hsspi controller to the 63158 dtsi.

Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-11 10:09:16 -04:00
Suman Anna
35f21c3ac6 arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes
The AM65x SoCs has a single dual-core Arm Cortex-R5F processor
subsystem/cluster (MCU_R5FSS0) within the MCU domain. This cluster
can be configured at boot time to be either run in a LockStep mode
or in an Asymmetric Multi Processing (AMP) fashion in Split-mode.
This subsystem has 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in Split-mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
1b846fc24d arm: dts: k3-j721e-main: Add C71x DSP node
The J721E SoCs have a single TMS320C71x DSP Subsystem in the MAIN
voltage domain containing the next-generation C711 CPU core. The
subsystem has 32 KB of L1D configurable SRAM/Cache and 512 KB of
L2 configurable SRAM/Cache. This subsystem has a CMMU but is not
used currently. The inter-processor communication between the main
A72 cores and the C711 processor is achieved through shared memory
and a Mailbox. Add the DT node for this DSP processor sub-system
in the common k3-j721e-main.dtsi file.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
293e39780d arm: dts: k3-j721e-main: Add C66x DSP nodes
The J721E SoCs have two TMS320C66x DSP Core Subsystems (C66x CorePacs)
in the MAIN voltage domain, each with a C66x Fixed/Floating-Point DSP
Core, and 32 KB of L1P & L1D configurable SRAMs/Cache and an additional
288 KB of L2 configurable SRAM/Cache. These subsystems do not have
an MMU but contain a Region Address Translator (RAT) sub-module for
translating 32-bit processor addresses into larger bus addresses.
The inter-processor communication between the main A72 cores and
these processors is achieved through shared memory and Mailboxes.
Add the DT nodes for these DSP processor sub-systems in the common
k3-j721e-main.dtsi file.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
55f8eb3169 arm: dts: k3-j721e-main: Add MAIN domain R5F cluster nodes
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT nodes for these two MAIN domain R5F cluster/subsystems,
the two R5 cores are each added as child nodes to the corresponding
main cluster node. Configure SS0 in split mode an SS1 in lockstep mode,
with the ATCMs enabled to allow the R5 cores to execute code from DDR
with boot-strapping code from ATCM.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
b9f035e9c8 arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in LockStep mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Andreas Dannenberg
20a229676e armv7R: dts: k3: am654: Add MCU_UART0 related definitions
Although we currently use the MAIN_UART0 for R5 SPL console output there
are cases where we require access to the MCU_UART0 as well for example in
case of UART-based Y-Modem boot. To support these scenarios add related
DTS definitions to be able to use that UART early on.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11 10:07:33 -04:00
Marek Vasut
4a9f633e3d ARM: socfpga: vining_fpga: Update DT
Pick minor changes from the downstream DT, disable MMC, add GMAC0 node
and adjust PHY skew settings for GMAC1.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:54:18 +02:00
Marek Vasut
94a16b8e70 ARM: socfpga: vining_fpga: Rename VINING|FPGA
The company Samtec was merged into Softing, migrate the board over to
the new name and update copyright headers.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:54:17 +02:00
Tom Rini
44fb0d6c9f Xilinx/FPGA changes for v2020.01
FPGA:
 - Enable fpga loading on Versal
 - Minor fix
 
 Microblaze:
 - Fix LMB configurations to support initrds
 - Some other cleanups
 
 Zynq:
 - Minor config/dt changes
 - Add distro boot support for usb1 and mmc1
 - Remove Xilinx private boot commands and use only distro boot
 
 ZynqMP:
 - Kconfig cleanups, defconfig updates
 - Update some dt files
 - Add firmware driver for talking to PMUFW
 - Extend distro boot support for jtag
 - Add new IDs
 - Add system controller configurations
 - Convert code to talk firmware via mailbox or SMCs
 
 Versal:
 - Add board_late_init()
 - Add run time DT memory setup
 - Add DFU support
 - Extend distro boot support for jtag and dfu
 - Add clock driver
 - Tune mini configurations
 
 Xilinx:
 - Improve documentation (boot scripts, dt binding)
 - Enable run time initrd_high calculation
 - Define default SYS_PROMPT
 - Add zynq/zynqmp virtual defconfig
 
 Drivers:
 - Add Xilinx mailbox driver for talking to firmware
 - Clean zynq_gem for Versal
 - Move ZYNQ_HISPD_BROKEN to Kconfig
 - Wire genphy_init() in phy.c
 - Add Xilinx gii2rgmii bridge
 - Cleanup zynq_sdhci
 - dwc3 fix
 - zynq_gpio fix
 - axi_emac fix
 
 Others:
 - apalis-tk1 - clean config file
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXZ2mcwAKCRDKSWXLKUoM
 IT/KAJ4tL49YwINqCVGd7gafWvdfC4htygCcCgr9gLnJ+LjDQkxWT/r6faIcL00=
 =OnMk
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file
2019-10-09 16:22:03 -04:00
Tom Rini
eaa0bde051 u-boot-imx-20191009
-------------------
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532
 
 - MX6UL / ULZ
 - Toradex board
 - Allow to set OCRAM for MX6Q/D
 - MX7ULP
 - MX8: (container image, imx8mq_mek), SCU API
 - fix several board booting from SD/EMMC (cubox-i for example)
 - pico boards
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2dlTAPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3yfgL/1b4pKCwxswK42XkPpdHN1u/v2W/PVDanl/H
 EYxlluHVFH23bLTjLvrrgQjAnZD1VQhxWq3bwCMoJ8vb9tYQ3d9vq7XADQ0WVQV+
 EfhE33fVRPRT3rEdhDKWm+y1mL8YPvYEBnr9li7qU9n1VxiwONPXxMXMqoo9/lbM
 b6lJaG5KkuK8Ofx3cYFVQeAEdsFYIJ2aXtTqsqrV9o2sjruOuG3Ux+6Ov+9O0crY
 q8MXvW6kwWkVVNriVV7Yal0pomPZfMTqft007En9Mv2FtXqMeCWZ4Xh2LtRylR7n
 ruIbo94jkPuwuZ0p/6SeiyopoG/hU/skrkJv1s8W70DOsyaunP2BsveYXEjMV2Rb
 DomotcJit9Ws6P7rOP1oI8OvxSxVN8n6mo23UviZd8MjNAmOm49BtSxVGGB+pwmr
 ufGFG4MGQ5VpCxmzh6KrJCLXpI/mhKrkBkZy58cUbus7aPv3es/jBmmtGlU3m6ka
 NlEzHOX1hpJV/lhLvxjqRhVxuXvXOA==
 =+e3p
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191009
-------------------

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532

- MX6UL / ULZ
- Toradex board
- Allow to set OCRAM for MX6Q/D
- MX7ULP
- MX8: (container image, imx8mq_mek), SCU API
- fix several board booting from SD/EMMC (cubox-i for example)
- pico boards

[trini: display5 merged manually]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-09 11:44:45 -04:00
Joris Offouga
3a7f25b765 pico-imx7d: Remove dead code for dm_video
Since convert dm_video, unused code introduced, so remove this

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:36:37 +02:00
Peng Fan
9b15ce9193 imx: Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UART

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
d68d73df17 arm: dts: add i.MX8MM pin func
Import i.MX8MM pin func from Linux Kernel,
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
2f1723132e arm: dts: import i.MX8MM dtsi
Import i.MX8MM dtsi from Linux Kernel,
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Patrick Wildt
63927b8fc7 imx: add the i.MX8M reset controller node
This patch adds the reset controller node to the i.MX8MQ SoC
device tree.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Patrick Wildt
d08a194871 imx: add support for i.MX8MQ power domain controller
Add support for the power domain controller that's used on the
i.MX8MQ.  This will be needed to be able to power on the PCIe
controller.  Bindings taken from Linux, driver implementation
taken from the i.MX8 power domain controller and adjusted for
the i.MX8M SoC.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Parthiban Nallathambi
6745dac494 ARM: dts: pcl063: add usdhc reset pin of eMMC
pcl063 phycore SoM with eMMC also got usdhc reset pin,
add reset pin to pinmux.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08 16:36:36 +02:00
Anatolij Gustschin
e4b91f085d imx: wandboard: convert FEC support to DM_ETH
Remove CONFIG_DM_ETH conversion warning to avoid board removal.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:36:36 +02:00
Lukasz Majewski
f1e323a0a5 dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file
After this change it is possible to use imx28-<board>-u-boot.dtsi with
the imx28-u-boot.dtsi explicitly included without breaking setup from
imx28-<board>.dts file.

The problem is that the imx28.dtsi included in a wrong place overrides the
changes made in imx28-<board>.dts. As a result some devices are "disabled"
in the final DTB.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:36:36 +02:00
Lukasz Majewski
d5354f59d0 DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover,
the SYSRESET_WATCHDOG driver is used to support 'reset' command.

As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is
enabled for it. This allows the legacy SPL code to work properly.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Fabio Estevam
004eee86f1 pico-imx6: Add initial support
Add the initial support for the pico-imx6 variants.

DDR initialization is based on the TechNexion's U-Boot code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Joris Offouga
d89f0a889f configs: pico-imx7d: Convert to DM_VIDEO
This commit convert all pico-imx7d to DM_VIDEO

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08 16:35:59 +02:00
Joris Offouga
8787a70c52 ARM: dts: pico-imx7d: sync device tree with v5.3-rc6
Synchronize device tree with v5.3-rc6 label

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08 16:35:59 +02:00
Joris Offouga
a89b1feabb ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts change
This commit introduce u-boot.dtsi

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Suggested-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:59 +02:00
Peng Fan
7932b1c9fd imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi
The changes were added by following patch:
commit <9002e735e717> ("imx: mx6sabresd: fix boot hang with video")
commit <f45ec8fcfb86> ("imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes")

Let's move the U-Boot specific change to imx6qdl-u-boot.dtsi

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:58 +02:00
Troy Kisky
f8f9f79a63 nitrogen6x: migrate to using device tree
Migrate to using device tree required for further driver model
integration.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08 16:35:16 +02:00
Peng Fan
ab1c482440 arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
The gpio command currently uses equal bank names "GPIO0_"
for all existing gpio banks, i. e.:

U-Boot# gpio status -a
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...

Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
    ...

So the command is broken, it is not possible to address
a desired bank. Add gpio aliases to fix this.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:35:16 +02:00
Peng Fan
ae0760584b imx: mx6ul_14x14_evk: convert to DM_VIDEO
To support DM_VIDEO,
 Add display node for lcdif
 Drop board iomuxc settings.
 Enable DM_VIDEO

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:33:45 +02:00
Peng Fan
1d293e6804 imx: add i.MX6ULZ board
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
with i.MX6ULL. so most code of i.MX6ULL can be reused
by i.MX6ULZ.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
939a9644f0 arm: dts: import dts for i.MX6ULZ
Import kernel dts for i.MX6ULZ from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
c158381288 arm: dts: sync dts for i.MX6ULL
Sync kernel dts for i.MX6ULL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
281256c064 arm: dts: sync dts for i.MX6UL
Sync kernel dts for i.MX6UL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Ibai Erkiaga
95497afada arm64: zynqmp: add firmware and mailbox node to DT
The following patch adds a mailbox node and firmware node to following the
mainline DT.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
64eb13bfd7 arm64: zynqmp: Add a2197 memory board revA
Similar to processor board but i2c structure is completely different.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
917c57845a arm64: zynqmp: Add System Controller for a2197-g/p
Similar SCs but different wiring.

- dc_i2c is connected to X-PRC cards that's why label is required to have
  an option to hook up some devices.
- Exactly identify i2c devices on x-prc boards.
  In case of missing i2c connection devices won't be accessible.
- USB 0 should be device mode with super speed.
- USB 1 should be host mode.
- Fix i2c mux reset pin entry - commented, not verified.
- Fix i2c1 eeprom compatible string - it is an ST 128Kbit device.
  Need to use atmel fallback.
- Fix si570 I2C slave address and add corresponding part numbers.
- Enable AMS for system monitoring.
- phy reset property should be commented because it will throw a
  warning dump when called from context that can sleep.
  No support for phys property (zynqmp phy driver) with SGMII.
  Add is-internal-pcspma property required by uboot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
be972b2bd1 arm64: zynqmp: Add generic a2197 system controller config
Add generic configuration for a2197-p/-m/-g boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
b96b695f2c arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatible
Change has been done across the whole tree only zynqmp-mini-qspi hasn't
been fixed.
Origin changed done by commit ffd4c7c2ec
("dts: switch spi-flash to jedec, spi-nor compatible")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Vipul Kumar
69b67ec8c9 ARM: zynq: dts: Added alias for usb node
This patch added alias for usb node in dts file.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
a6af30908b ARM: zynq: Align model name with DT
Use model property to distinguish different configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
dd3c7b6ea1 arm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 node
This node is used by qspi driver for supporting qspi boot mode in SPL.

Similar changes have beeen done by commit a9022b017a
("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Eugen Hristev
c69ce8029a ARM: dts: at91: sam9x60ek: add onewire support
Add support for onewire memory.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
223cab5efb ARM: dts: at91: sam9x60: add onewire node
Add onewire node for w1 support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tudor Ambarus
228f9e0244 ARM: dts: at91: sam9x60ek: Enable qspi node
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Enable the qspi node together with the SST26VF064B qspi nor flash
memory. Booting from the QSPI NOR flash is now possible.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
885554360d ARM: dts: at91: sam9x60: Add macb0 Ethernet controller
Add Ethernet controller to dtsi file and enable it on sam9x60ek
platform connected with rmii.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
f99e0ad25a ARM: dts: Add dts files for sam9x60ek
add device tree files for sam9x60ek board with below changes.

- Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit)
- Add the reg property for the pinctrl node.
- Add the "u-boot,dm-pre-reloc" property to determine which nodes
  are used by the board_init_f stage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[prasanthi.chellakumar@microchip.com: fix style/whitespace issues]
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
[nicolas.ferre@microchip.com:
- fix gclk,
- fix pio/pinctrl controller definition and allow to have more
  than only PIOA for this SoC,
- removing pinctrl address]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com:
- use SAM9X60's compatible for pinctrl
- add drive strength and slew rate options for SDMMC0 pins.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com:
- u-boot,dm-pre-reloc property in dedicated file,
- fix pit len, starts from 0xFFFFFE40 and it is of len 0x10]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
4a500e4337 ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
Add node for hlcld for u-boot logo display at boot.
This is compatible with the Precision Design Associates (PDA) TM5000 screen.
Timings are compatible with simple panel from Linux, panel name is
pda_91_00156_a0

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
06e0da70ca ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi
Add node for qspi1 memory connected on the wlsom

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
58581058f9 ARM: dts: at91: sama5d2: add seq for qspi1
qspi1 does not have an alias/seq number. This is required for
SPL default SF bus booting for the boards that have this SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
44b5c40be3 board: atmel: add sama5d27_wlsom1_ek board
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip
WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tom Rini
dac51e9aaf Merge branch 'master' of git://git.denx.de/u-boot-sh
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-05 20:06:58 -04:00
Adam Ford
5ff1963da3 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and
usdhc2.  This creates the missing imx6q-logicpd-u-boot.dtsi file
which will enable these functions so SPL can properly setup UART, detect
microSD card, and startup.

Fixes: 8f4691e31a ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,
remove MMC init")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04 12:21:23 -04:00
Marek Vasut
49d5fba81c ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
This patch restores commit c49d0ac38a ("ARM: dts: rmobile: Increase off-on
delay on the SD Vcc regulator"), which was accidentally dropped during DT
resync in commit 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with
Linux 5.0").

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Fixes: 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-30 02:07:02 +02:00