Commit graph

62 commits

Author SHA1 Message Date
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Tom Rini
7e6a6fd821 Convert CONFIG_ENV_SPI_BUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_SPI_BUS
   CONFIG_ENV_SPI_CS
   CONFIG_ENV_SPI_MAX_HZ
   CONFIG_ENV_SPI_MODE

As part of this, we use Kconfig to provide the defaults now that were
done in include/spi_flash.h.  We also in some cases change from using
CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in
use anyhow as ENV was not enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Marek Behún
a67b3719f3 mtd: spi-flash: Check for zero length in legacy spi_flash_*()
Check for zero length in the legacy spi_flash_read() /
spi_flash_write() / spi_flash_erase() functions.
On zero length, return 0 immediately, don't call the underlying method.

Rationale:
- these legacy functions call the _read(), _write() and _erase() methods
  of struct mtd
- the DM callers of these methods already check for zero length
- making all callers of these methods check for zero length makes it
  possible to remove the check from implementations of these _read(),
  _write() and _erase() methods

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-23 15:47:33 +05:30
Simon Glass
b3b60f5912 sf: Support querying write-protect
This feature was dropped from U-Boot some time ago:

   f12f96cfaf (sf: Drop spl_flash_get_sw_write_prot")

However, we do need a way to see if a flash device is write-protected,
since if it is, it may not be possible to write to do (i.e. failing to
write is expected).

I am not sure of the correct layer to implement this, so this patch is a
stab at it. If spi-flash makes sense then I will add to the 'sf' also.

Re the points mentioned in the removal commit:

    1) This kind of requirement can be achieved using existing
       flash operations and flash locking API calls instead of
       making a separate flash API.

Which uclass is this?

    2) Technically there is no real hardware user for this API to
       use in the source tree.

I do want coral (at least) to support this.

    3) Having a flash operations API for simple register read bits
       also make difficult to extend the flash operations.

This new patch only mentions write-protect being on or off, rather than
the actual mechanism.

    4) Instead of touching generic code, it is possible to have
       this functionality inside spinor operations in the form of
       flash hooks or fixups for associated flash chips.

That sounds to me like what drivers are for. But we still need some sort
of API for it to be accessible.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Heinrich Schuchardt
b09c74f66d mtd: spi_flash_free()
dfu_free_entities() invoking dfu_free_entity_sf() has let to segementation
faults due to double freeing the same device.

spi_flash_free() is not relevant for the driver model but exists only for
compatibility with old drivers.

We must not remove any device here:

* The device may still be referenced.
* We don't want to have to probe again.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-27 13:59:36 +13:00
Simon Glass
a00867b47a sf: Drop dm.h header file from spi_flash.h
This header file should not be included in other header files. Remove it
and use a forward declaration instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Lukasz Majewski
56c4046038 spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*
This change allows more fine tuning of driver model based SPI support in
SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI
support in SPL and TPL via Kconfig option.

Before this change it was necessary to use:
    /* SPI Flash Configs */
    #if defined(CONFIG_SPL_BUILD)
    #undef CONFIG_DM_SPI
    #undef CONFIG_DM_SPI_FLASH
    #undef CONFIG_SPI_FLASH_MTD
    #endif

in the ./include/configs/<board>.h, which is error prone and shall be
avoided when we strive to switch to Kconfig.

The goal of this patch:

Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL).
Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must
still support non DM driver.

Another use case is the conversion of non DM/DTS SPI driver to support
DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the
distinction is needed in Kconfig (also if SPL version of the driver
supports OF_PLATDATA).

In the end of the day one would have to support following use cases (in
single driver file - e.g. mxs_spi.c):

- U-Boot proper driver supporting DT/DTS
- U-Boot proper driver without DT/DTS support (deprecated)
- SPL driver without DT/DTS support
- SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to
  run full blown DT/DTS)
- SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained
  environment with no fitImage and OF_LIBFDT support).

Some boards do require SPI support (with DM) in SPL (TPL) and some only
have DM_SPI{_FLASH} defined to allow compiling SPL.

This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI)
and provides corresponding defines in Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[trini: Fixup a few platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29 13:34:43 -04:00
Jagan Teki
f12f96cfaf sf: Drop spl_flash_get_sw_write_prot
The get_sw_write_prot API is used to get the write-protected
bits of flash by reading the status register and other wards
it's API for reading register bits.

1) This kind of requirement can be achieved using existing
   flash operations and flash locking API calls instead of
   making a separate flash API.
2) Technically there is no real hardware user for this API to
   use in the source tree.
3) Having a flash operations API for simple register read bits
   also make difficult to extend the flash operations.
4) Instead of touching generic code, it is possible to have
   this functionality inside spinor operations in the form of
   flash hooks or fixups for associated flash chips.

Considering all these points, this patch drops the get_sw_write_prot
and associated code bases.

Cc: Simon Glass <sjg@chromium.org>
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01 17:55:24 +05:30
Simon Glass
4806fcea1a mtd: spi: Export spi_flash_std_probe()
With of-platdata we need to create drivers for particular chips, or at
least drivers that are separate from the standard code, since C structures
are created by dtoc which are private to that driver.

To avoid duplicating the probing code, export this probe function for use
by these drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:24 +08:00
Patrick Delaunay
abe66b1b5d Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:59 -04:00
Patrick Delaunay
14453fbfad Convert CONFIG_SF_DEFAULT_* to Kconfig
This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:53 -04:00
Vignesh R
c4e8862308 mtd: spi: Switch to new SPI NOR framework
Switch spi_flash_* interfaces to call into new SPI NOR framework via MTD
layer. Fix up sf_dataflash to work in legacy way. And update sandbox to
use new interfaces/definitions

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07 15:33:21 +05:30
Simon Glass
a58986ca8b sf: Add a method to obtain the block-protect setting
It is useful to obtain the block-protect setting of the SPI flash, so we
know whether it is fully open or (perhaps partially) write-protected. Add
a method for this. Update the sandbox driver to process this operation and
add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
008dcddf99 dm: spi: Update sandbox SPI emulation driver to use ofnode
Update the parameters sandbox_sf_bind_emul to support livetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-09 09:11:00 -06:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Mario Six
74ea6e82f8 spi: Remove spi_flash_probe_fdt
Commit ba45756 ("dm: x86: spi: Convert ICH SPI driver to driver model")
removed the last usage of the spi_flash_probe_fdt function, rendering it
obsolete.

This patch removes the function.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-24 12:04:07 +05:30
Simon Glass
ea022a3775 spi: Move freescale-specific code into a private header
At present there are two SPI functions only used by freescale which are
defined in the spi_flash.h header. One function name matches an existing
generic SPL function.

Move these into a private header to avoid confusion.

Arcturus looks like it does not actually support SPI, so drop the SPI code
from that board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:35 -04:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Jagan Teki
11c579bc9c sf: Remove spi_flash_remove
Use direct call to device_remove instead of exctra
spi_flash_remove defination.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-01-13 18:47:26 +05:30
Bin Meng
439fcb9b4f sf: Fix NULL pointer exception for flashes without lock methods
commit c3c016c "sf: Add SPI NOR protection mechanism" introduced
flash_lock()/flash_unlock()/flash_is_locked() methods for SPI flash,
but not every flash driver supplies these. We should test these
methods against NULL before actually calling them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-13 09:47:22 -05:00
Fabio Estevam
c3c016cf75 sf: Add SPI NOR protection mechanism
Many SPI flashes have protection bits (BP2, BP1 and BP0) in the
status register that can protect selected regions of the SPI NOR.

Take these bits into account when performing erase operations,
making sure that the protected areas are skipped.

Tested on a mx6qsabresd:

=> sf probe
SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB
=> sf protect lock  0x3f0000 0x10000
=> sf erase 0x3f0000 0x10000
offset 0x3f0000 is protected and cannot be erased
SF: 65536 bytes @ 0x3f0000 Erased: ERROR
=> sf protect unlock  0x3f0000 0x10000
=> sf erase 0x3f0000 0x10000
SF: 65536 bytes @ 0x3f0000 Erased: OK

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
[re-worked to fit the lock common to dm and non-dm]
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 16:47:06 -05:00
Jagan Teki
baaaa7539c sf: Add FSR support to spi_flash_cmd_wait_ready
This patch adds flag status register reading support to
spi_flash_cmd_wait_ready.

Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Hou Zhiqiang <B48286@freescale.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:03 +05:30
Jagan Teki
1fabefddfc sf: Make flash->flags use for generic usage
Use the flash->flags for generic usage, not only for dm-spi-flash,
this will be used for future flag additions.

[Correct the spi flash flags detect logic]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-10-25 20:17:03 +05:30
Jagan Teki
5d69df3541 spi/sf: Minor cleanups
- Adjust tab spaces
- Add comments

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:15:03 +05:30
Bin Meng
be7be78e10 dm: sf: Save flash flags to struct spi_flash
Add a new member 'flags' in struct spi_flash to store the flash flags
during spi_flash_validate_params().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-28 13:29:54 +05:30
Pavel Machek
d15e74f16c spi flash: fix trivial problems
Fix typos and too big #ifdef.

Signed-off-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-22 16:49:51 +05:30
Simon Glass
8d987abc6a dm: sf: Add driver model read/write/erase methods
Permit use of a udevice to talk to SPI flash. Ultimately we would like
to retire the use of 'struct spi_flash' for this purpose, so create the
new API for those who want to move to it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Simon Glass
4c2dbefde5 dm: sf: Add a uclass for SPI flash
Add a driver model uclass for SPI flash which supports the common
operations (read, write, erase). Since we must keep support for the
non-dm interface, some modification of the spi_flash header is required.

CONFIG_DM_SPI_FLASH is used to enable driver model for SPI flash.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Simon Glass
ff0960f9a0 sf: Tidy up public and private header files
Since spi_flash.h is supposed to be the public API for SPI flash, move
private things to sf_internal.h. Also tidy up a few comment nits.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:50 -06:00
Nikita Kiryanov
88e34e5ff7 spl: replace CONFIG_SPL_SPI_* with CONFIG_SF_DEFAULT_*
Currently, CONFIG_SPL_SPI_* #defines are used for controlling SPI boot in
SPL. These #defines do not allow the user to select SPI mode for the SPI flash
(there's no CONFIG_SPL_SPI_MODE, so the SPI mode is hardcoded in
spi_spl_load.c), and duplicate information already provided by
CONFIG_SF_DEFAULT_* #defines.

Kill CONFIG_SPL_SPI_*, and use CONFIG_SF_DEFAULT_* instead.

Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Hannes Petermaier <hannes.petermaier@br-automation.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-24 17:40:10 +05:30
Prabhakar Kushwaha
1eaa742d85 driver: Add support of image load for MMC & SPI in SPL
Add support of loading image, binary for MMC and SPI during SPL boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:50 -07:00
Vasili Galka
801cec5907 Cosmetic: Typo fixes
Signed-off-by: Vasili Galka <vasili@visionmap.com>
2014-03-07 10:59:06 -05:00
Jagannadha Sutradharudu Teki
056fbc73d5 sf: Add dual memories support - DUAL_PARALLEL
This patch added support for accessing dual memories in
parallel connection with single chipselect line from controller.

For more info - see doc/SPI/README.dual-flash

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-12 21:40:22 +05:30
Jagannadha Sutradharudu Teki
f77f469117 sf: Add dual memories support - DUAL_STACKED
This patch added support for accessing dual memories in
stacked connection with single chipselect line from controller.

For more info - see doc/SPI/README.dual-flash

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-12 21:40:11 +05:30
Jagannadha Sutradharudu Teki
2ba863fae6 sf: Code cleanups
- comment typo's
- func args have a proper names

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-12 21:38:21 +05:30
Jagannadha Sutradharudu Teki
ff063ed480 sf: Discover read dummy_byte
Discovered the read dummy_byte based on the
configured read command.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 16:50:45 +05:30
Jagannadha Sutradharudu Teki
c4ba0d82d3 sf: Add QUAD_IO_FAST read support
This patch adds support QUAD_IO_FAST read command.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:27 +05:30
Jagannadha Sutradharudu Teki
33adfb5f9b sf: Separate the flash params table
Moved the flash params table from sf_probe.c and
placed on to sf_params.c, hence flash params file will
alter based on new addons.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:27 +05:30
Jagannadha Sutradharudu Teki
3163aaa63f sf: Add quad read/write commands support
This patch add quad commands support like
- QUAD_PAGE_PROGRAM => for write program
- QUAD_OUTPUT_FAST ->> for read program

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:11 +05:30
Jagannadha Sutradharudu Teki
4e09cc1e2c sf: Add extended read commands support
Current sf uses FAST_READ command, this patch adds support to
use the different/extended read command.

This implementation will determine the fastest command by taking
the supported commands from the flash and the controller, controller
is always been a priority.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:10:28 +05:30
Simon Glass
0efc02499f spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node
This allows us to put the SPI flash chip inside the SPI interface node,
with U-Boot finding the correct bus and chip select automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-09 12:22:12 -07:00
Wolfgang Denk
3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00
Jagannadha Sutradharudu Teki
ce22b922dd sf: Minor cleanups
- Add spaces, tabs
- Commenting.
- Rearrange code.
- Add static qualifier for missing func.
- Remove memory_map from ramtron.c
- Ramtron: spi_flash_internal.h -> sf_internal.h

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 19:34:56 +05:30
Jagannadha Sutradharudu Teki
a5e8199a13 sf: spi_flash cleanups
More cleanups on spi_flash side:
- Removed unneeded comments.
- Rearranged macros in proper location.
- Rearranged func declerations
- Renamed few function names.
- Added License headers.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:49 +05:30
Jagannadha Sutradharudu Teki
30b0ca6318 sf: Remove spi_flash_do_alloc references
Added a support for common probe, hence removed removed
spi_flash_do_alloc reference.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:49 +05:30
Jagannadha Sutradharudu Teki
7ab35d922d sf: Add proper comment style on spi_flash structure
Added proper comment style on spi_flash structure to make
more readable.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:46 +05:30
Jagannadha Sutradharudu Teki
0f6232801c sf: probe: Add support for flag status polling
From Micron, 512MB onwards, flash requires to poll flag status
instead of read status- hence added E_FSR flag on spectific
flash parts.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:45 +05:30
Jagannadha Sutradharudu Teki
f4f51a8ff8 sf: probe: Add support for erase sector selection flag
SECT_4K, SECT_32K and SECT_64K opeartions are performed to
to specific flash by adding a SECT* flag on respective
spi_flash_params.flag param.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:45 +05:30
Jagannadha Sutradharudu Teki
10ca45d005 sf: probe: Add support for SST_WP
Most of the SST flashes needs to write up using SST_WP, AAI
Word Program, so added a flag param on spi_flash_params table.

SST flashes, which supports SST_WP need to use a WP write
sst_write_wp instead of common flash write.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:44 +05:30
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00