Commit graph

8 commits

Author SHA1 Message Date
Marek Vasut
cd07358c04 ARM: rmobile: Reset ethernet PHY
Toggle the PHY reset GPIO to bring the ethernet PHY out of reset properly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
NOTE: This should be moved to the SH ethernet driver, but it's quite
      late in the cycle, so this is something to be done in 2018.05.
2018-02-17 21:59:21 +01:00
Marek Vasut
7ee37d0e0c ARM: rmobile: Convert Porter to SPL
Due to size limitations of the MERAM, switch U-Boot to SPL.
The SPL is loaded by the SPI_LOADER into MERAM and then loads
U-Boot proper into DRAM. This way U-Boot can freely grow in
size in DRAM, as there is plenty of it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
NOTE: To update U-Boot, first install u-boot.img to 0x140000 in SPI NOR,
      then use the Minimon to flash u-boot-spl.srec using ls,2,e6304000.
      To generate u-boot-spl.srec, use objcopy:
        arm-linux-gnueabi-objcopy -O srec spl/u-boot-spl u-boot-spl.srec
2018-02-16 16:43:11 +01:00
Marek Vasut
789edf694c ARM: rmobile: Convert R8A7791 Porter board to DM and DT
Convert the R8A7791 Porter board to DM and DT. This implies mostly
enabling the necessary configuration options and plucking out the
ad-hoc configuration from the board file. Moreover, the pre-reloc
malloc size was increased to allow the clock driver to start up
early without running out of malloc space and the early stack was
moved further up in the DRAM to avoid rewriting U-Boot itself.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27 20:38:54 +01:00
Simon Glass
35affd7a2f env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()
Rename this function for consistency with env_get().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:44 -04:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Nobuhiro Iwamatsu
a7da6f8c3d ARM: rmobile: Move rcar-gen2-common to rcar-common
To common use of rcar-gen2-common directory in the R-Car SoCs, and change from
rcar-gen2-common to rcar-common.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
1cc95f6e1b ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:34 +09:00
Vladimir Barinov
60c0467a94 arm: rmobile: Add Porter board support
Porter is an entry level development board based on R-Car M2 SoC (R8A7791)

This commit supports the following peripherals:
- SCIF, I2C, Ethernet, QSPI, SD, USB Host

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-02-25 14:17:49 +09:00