This message comes up a lot when scanning filesystems. It suggests to the
user that there is some sort of error, but in fact there is no reason to
expect that a particular partition has a btrfs filesystem. Other
filesystems don't print this error.
Turn it into a debug message.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Qu Wenruo <wqu@suse.com>
BTRFS volume consists of a number of subvolumes which can be mounted separately
from each other. The top-level subvolume always exists even if no subvolumes
were created manually. A subvolume can be denoted as the default subvolume i.e.
the subvolume which is mounted by default.
The default "default subvolume" is the top-level one, but this is far from the
common practices used in the wild. For instance, openSUSE provides an OS
snapshot/rollback feature based on BTRFS. To achieve this, the actual OS root
filesystem is located into a separate subvolume which is "default" but not
"top-level". That means that the /boot/dtb/ directory is also located inside
this default subvolume instead of top-level one.
However, the existing btrfs u-boot driver always uses the top-level subvolume
as the filesystem root. This behaviour 1) is inconsistent with
mount /dev/sda1 /target
command, which mount the default subvolume 2) leads to the issues when
/boot/dtb cannot be found properly (see the reference).
This patch uses the default subvolume as the filesystem root to overcome
mentioned issues.
Reference: https://bugzilla.suse.com/show_bug.cgi?id=1185656
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Fixes: f06bfcf54d ("fs: btrfs: Crossport open_ctree_fs_info() from btrfs-progs")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Since the ACPI-generation code makes use of UUIDs we typically need to
enabled UUID support for it to build. Add a new Kconfig condition.
Use it for BTRFS also.
Signed-off-by: Simon Glass <sjg@chromium.org>
The superblock buffer must be cache aligned, since it might be used
in DMA context, allocate it using ALLOC_CACHE_ALIGN_BUFFER() just
like it was done in btrfs_read_superblock() and read_tree_node().
This fixes this output on boot and non-working btrfs on iMX53:
CACHE: Misaligned operation at range [ced299d0, ced2a9d0]
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
There are some cases where decompressed sectors can have padding zeros.
In kernel code, we have lines to address such situation:
/*
* btrfs_getblock is doing a zero on the tail of the page too,
* but this will cover anything missing from the decompressed
* data.
*/
if (bytes < destlen)
memset(kaddr+bytes, 0, destlen-bytes);
kunmap_local(kaddr);
But not in U-boot code, thus we have some reports of U-boot failed to
read compressed files in btrfs.
Fix it by doing the same thing of the kernel, for both inline and
regular compressed extents.
Reported-by: Matwey Kornilov <matwey.kornilov@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1183717
Fixes: a26a6bedaf ("fs: btrfs: Introduce btrfs_read_extent_inline() and btrfs_read_extent_reg()")
Signed-off-by: Qu Wenruo <wqu@suse.com>
When the btrfs_read_fs_root() function is searching a ROOT_ITEM with
location key offset other than -1, it currently fails via BUG_ON.
The offset can have other value than -1, though. This can happen for
example if a subvolume is renamed:
$ btrfs subvolume create X && sync
Create subvolume './X'
$ btrfs inspect-internal dump-tree /dev/root | grep -B 2 'name: X$
location key (270 ROOT_ITEM 18446744073709551615) type DIR
transid 283 data_len 0 name_len 1
name: X
$ mv X Y && sync
$ btrfs inspect-internal dump-tree /dev/root | grep -B 2 'name: Y$
location key (270 ROOT_ITEM 0) type DIR
transid 285 data_len 0 name_len 1
name: Y
As can be seen the offset changed from -1ULL to 0.
Do not fail in this case.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>
Since commit 325dd1f642 ("fs: btrfs: Use btrfs_iter_dir() to ...")
when btrfs is listing a directory, the output is not aligned:
<SYMLINK> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr
<DIR> 0 Tue Feb 02 12:42:09 2021 @
<FILE> 108 Tue Feb 02 12:54:04 2021 1.info
Return back to how it was displayed previously, i.e.:
<SYM> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr
<DIR> 0 Tue Feb 02 12:42:09 2021 @
< > 108 Tue Feb 02 12:54:04 2021 1.info
Instead of '<FILE>', print '< >', as ext4 driver.
If an unknown directory item type is encountered, we will print the type
number left padded with spaces, enclosed by '?', instead of '<' and '>',
i.e.:
? 30? ............................. name
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: 325dd1f642 ("fs: btrfs: Use btrfs_iter_dir() to replace ...")
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Skip xattrs in directory listing. U-Boot filesystem drivers do not list
xattrs.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Since commit 565a4147d1 ("fs: btrfs: Add more checksum algorithms")
btrfs uses the sha256 checksum algorithm. But Kconfig lacks to select
it. This leads to compilation errors:
fs/built-in.o: In function `hash_sha256':
fs/btrfs/crypto/hash.c:25: undefined reference to `sha256_starts'
fs/btrfs/crypto/hash.c:26: undefined reference to `sha256_update'
fs/btrfs/crypto/hash.c:27: undefined reference to `sha256_finish'
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
At the beginning of close_ctree_fs_info() the value 0 is assigned to err
and never changed before testing it.
Let's get rid of the superfluous variable.
Fixes: f06bfcf54d ("fs: btrfs: Crossport open_ctree_fs_info() from btrfs-progs")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
In __btrfs_map_block() we do a int * int and assign it to u64.
This is not safe as the result (int * int) is still evaluated as (int)
thus it can overflow.
Convert one of the multiplier to u64 to prevent such problem.
In real world, this should not cause problem as we have device number
limit thus it won't go beyond 4G for a single stripe.
But it's harder to teach coverity about all these hidden limits, so just
fix the possible overflow.
Reported-by: Coverity CID 312957
Reported-by: Coverity CID 312948
Signed-off-by: Qu Wenruo <wqu@suse.com>
In show_dir() if we hit a ROOT_ITEM, we can exit with uninitialized
@ret.
Fix it by initializing it to 0.
Reported-by: Coverity CID 312955
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
In btrfs_lookup_path() the local variable @type should always be updated
after we hit any file/dir.
But if @filename is NULL from the very beginning, then we don't
initialize it and return it directly.
To prevent such problem from happening, we initialize @type to
BTRFS_FT_UNKNOWN.
For normal execution route, it will get updated for each filename we
resolved.
Buf if we didn't find any path, we check if the type is still FT_UNKNOWN
and ret == 0. If true we know there is something wrong, just return
-EUCLEAN to inform the caller.
Reported-by: Coverity CID 312958
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This cleans up the now unneeded code from the old btrfs implementation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch introduces a new function, list_one_subvol(), which will
resolve the path to FS_TREE of one subvolume.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch introduces a new function, get_path_in_subvolume(), which
resolves inode number into path inside a subvolume.
This function will be later used for btrfs subvolume list functionality.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This version of btrfs_file_read() has the following new features:
- Tries all mirrors
- More handling on unaligned size
- Better compressed extent handling
The old implementation doesn't handle compressed extent with offset
properly: we need to read out the whole compressed extent, then
decompress the whole extent, and only then copy the requested part.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This implements lookup_data_extent() function for the incoming
new implementation of btrfs_file_read().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
These two functions are used to do sector aligned read, which will be
later used to implement btrfs_file_read().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Rename btrfs_file_read() and its callees to avoid name conflicts with
the incoming new code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
After this the only remaining function that still utilizes
__btrfs_lookup_path() is btrfs_read().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Use extent buffer based infrastructure to re-implement btrfs_readdir().
Along this rework, some small corner cases fixed:
- Subvolume tree mtime
Mtime of a subvolume tree is recorded in its root item, since there is
no INODE_ITEM for it.
This needs extra search from tree root.
- Output the unknown type
If the DIR_ITEM is corrupted, at least don't try to access the memory
out of boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This is the extent buffer based path lookup routine.
To implement this, btrfs_lookup_dir_item() is crossported from
btrfs-progs, and implements btrfs_lookup_path() from scratch.
Unlike the existing __btrfs_lookup_path(), since btrfs_read_fs_root()
will check whether a root is a orphan at read time, there is no need to
check root backref, this makes the code a little easier to read.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
All existing next_length() caller handles return value > BTRFS_NAME_LEN,
so there is no need to do BTRFS_NAME_LEN check in next_length().
But still, we want to exit early if we're beyond BTRFS_NAME_LEN, so this
patch makes next_length() exit as soon as we're beyond BTRFS_NAME_LEN.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
The existing __btrfs_readlink() can be easily re-implemented using the
extent buffer based btrfs_readlink().
This is the first step to re-implement U-Boot's btrfs code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Since the old code is using __btrfs_path/__btrfs_root which is different
from the regular extent buffer based one, we add "__" prefix for the old
implementation to avoid name conflicts for the incoming crossport.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
open_ctree_fs_info() is the main entry point to open btrfs.
This version is a simplfied version of __open_ctree_fd() of btrfs-progs,
the main differences are:
- Parameters on how to specify a block device
Instead of @fd and @path, U-Boot uses blk_desc and disk_partition_t.
- Remove open_ctree flags
There won't be multiple open ctree modes in U-Boot.
Otherwise functions structures are all kept the same.
With open_ctree_fs_info() implemented, also introduce the global
current_fs_info pointer to show the current opened btrfs.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
These two functions play a big role in btrfs bootstrap.
The following function is removed:
- Seed device support
Although in theory we can still support multiple devices, we don't have
a facility in U-Boot to do device scan without opening them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch copies the core function, btrfs_search_slot(), from
btrfs-progs.
This version has the following functionality removed:
- The ability to COW tree block
Related code is commented out, and can be enabled in the future.
- The readahead functionality
This is abused in kernel. Remove it completely.
With the core function in place, btrfs developers should feel at home now.
This also crossports supporting code like btrfs_previous_item() to
ctree.[ch].
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Crossport struct btrfs_root to ctree.h from btrfs-progs, with write
related members deleted.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This is to avoid naming conflicts between extent buffer based
btrfs_root.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
To avoid name conflicting between the extent buffer based btrfs_path
from btrfs-progs, rename struct btrfs_path to struct __btrfs_path.
Also rename btrfs_free_path() to __btrfs_free_path() to avoid conflicts.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This is the one of the basic stone function for btrfs, which:
- Resolves the chunk mappings
- Reads data from disk
- Does various sanity check
With read_tree_block(), we can finally crossport needed btrfs btree
operations to U-Boot.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch crossports volumes.[ch] from btrfs-progs, including:
- btrfs_map_block()
The core mechanism to map btrfs logical address to physical address.
This version includes multi-device support, along with RAID56 support.
- btrfs_scan_one_device()
This is the function to register one btrfs device to the list.
This is the main part of the multi-device btrfs assembling process.
Although we're not going to support multiple devices until U-Boot
allows us to scan one device without actually opening it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
[trini: Use %zu in a debug print to avoid warning]
Signed-off-by: Tom Rini <trini@konsulko.com>
This brings all structure accessors from btrfs-progs/ctree.h, as in
kernel's ctree.h.
All these accessors handle the endian convert at runtime, and since all
of them are defined as static inline functions, those which aren't used
won't take space in resulting binary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This brings the extent_io_tree infrastructure, with which we can finally
bring in proper btrfs_fs_info structure to ctree.h.
With read/write_extent_buffer() implemented we also backport
read/write_eb_member() to ctree.h.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch implements an infrastructure to insert/search/merge an extent
range (with variable length).
This provides the basis for later extent buffer cache used in btrfs.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This patch uses generic code from btrfs-progs to read one super block
from block device.
To support the btrfs-progs coding style, the following is also
crossported:
- BTRFS_SETGET_FUNC for btrfs_super_block
- btrfs_check_super() function
- Move btrfs_read_superblock() to disk-io.[ch]
Since super.c only contains pretty small amount of code, and
the extra check will be covered in later root read patches.
Differences between this implementation and btrfs-progs:
- No sbflags/sb_bytenr support
Since we only need to read the primary super block (like kernel),
sbflags/sb_bytenr used by super block recovery is not needed.
This also changes the following behavior of U-Boot btrfs:
- Only reads the primary super block
The old implementation reads all 3 super blocks, and also one
non-existing backup.
This is not correct, especially if there is another filesystem created
on the device but old superblocks are not rewritten.
Just like kernel, we only check the primary super block.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
[trini: Change error to be a define in compat.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
This mostly crossports crypto/hash.[ch] from btrfs-progs.
The differences are:
- No blake2 support
No blake2 related library in U-Boot yet.
- Use uboot xxhash/sha256 directly
No need to implement the code as U-Boot has already provided the
interface.
This adds the support for the following csums:
- SHA256
- XXHASH
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
This version includes all needed on-disk format from kernel.
Only need to modify the include headers for U-Boot, everything else is
untouched.
Also, since U-Boot btrfs is using a different endian convert timing (at
tree block read time), it needs some forced type conversion before
proper crossport.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.
Signed-off-by: Simon Glass <sjg@chromium.org>
