Commit graph

24 commits

Author SHA1 Message Date
Becky Bruce
31d8267224 PPC: Create and use CONFIG_HIGH_BATS
Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now.  Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-03 17:48:41 +02:00
TsiChung Liew
f33fca22e7 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-04-13 18:03:29 -07:00
Wolfgang Denk
32bf3d143a Fix quoting problem (preboot setting) in many board config files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-03 12:37:53 +01:00
Marian Balakowicz
5e71c51d74 [INKA4x0] NG hardware: flash support
Disabled and remove inka4x0 custom flash driver, use CFI flash
driver instead.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-15 13:37:28 +01:00
Marian Balakowicz
5fb6d7191e [INKA4x0] NG hardware: SDRAM support
Add support for three new DDR chips that may  be present on a NG
INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.

Cleanup board/inka4x0/mt48lc16m16a2-75.h file.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-15 13:29:55 +01:00
Marian Balakowicz
f23cb34c36 [INKA4x0] NG hardware: platform code update
- Cleanup compile warnings.
- Add missing '\0' in default environment.
- Increase CFG_MONITOR_LEN to 256 KiB.
- Add required CFG_USE_PPCENV.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2007-11-15 13:24:43 +01:00
Jon Loeliger
7f5c015774 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:38:02 -05:00
Jon Loeliger
1d2c6bc491 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 11:04:57 +02:00
Bartlomiej Sieka
c99512d6bd MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:53:43 +02:00
Wolfgang Denk
84e106c09d Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Wolfgang Denk
1806c75959 Update configuration for INKA4x0 board 2005-09-21 10:07:56 +02:00
wdenk
9f709b6cee Fix INKA4x0: use CS1 as gpio_wkup_6 output 2005-04-22 15:09:09 +00:00
wdenk
414eec35e3 Fix problems with SNTP support;
enable SNTP support in some boards.
2005-04-02 22:37:54 +00:00
wdenk
a0bdf49e39 INKA4x0: Allow initialization of LCD backlight dimming from
"brightness" environment variable.
2005-03-14 13:14:58 +00:00
wdenk
f4733a0764 Add port initialization for digital I/O on INKA4x0 2005-03-06 01:21:30 +00:00
wdenk
b05dcb58fe * Fix get_partition_info() parameter error in all other calls
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

* Patch by Andrew Dyer, 28 February 2005:
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0
2005-03-04 11:27:31 +00:00
wdenk
e58cf2a0cf Add support for SRAM and 2 x Quad UARTs on INKA4x0 board 2005-02-27 23:46:58 +00:00
wdenk
1968e615d4 Cleanup USB and partition defines 2005-02-24 23:23:29 +00:00
wdenk
151ab83a93 * Add support for ext2 filesystems and image timestamps to TQM5200 board
* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver
2005-02-24 22:44:16 +00:00
wdenk
436be29cad * Update CPC45 board configuration.
* Add USB and PCI support for INKA4x0 board
2005-01-31 22:09:11 +00:00
wdenk
08f272787a * Fix problems with CMC_PU2 flash driver.
* Adjust INKA 4x0 default settings
2004-12-19 21:39:27 +00:00
wdenk
ec0aee7b68 Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100 2004-12-19 09:58:11 +00:00
wdenk
138ff60c1e Add support for INKA4X0 board 2004-12-16 15:52:40 +00:00