Commit graph

22 commits

Author SHA1 Message Date
Michal Simek
52a504c5c0 ARM: zynq: Define rtc alias on zc702/zc706
Define rtc alias on zc702/zc706 boards.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/47df614929d49af9f562c103defb92900de9d3e1.1664279424.git.michal.simek@amd.com
2022-10-05 08:43:54 +02:00
Michal Simek
ce92321559 ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706
EEPROM stores identification information about board like a board name,
revision, serial number and ethernet MAC address. U-Boot is capable to read
nvmemX aliases and read/display provided information when nvmem alias link
is described.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c63bba87d0400b6bd0f5651fac21d525f12288f5.1664265311.git.michal.simek@amd.com
2022-10-05 08:43:54 +02:00
Michal Simek
0df062bf04 ARM: zynq: Wire single qspi on couple of boards
Single configuration is working fine and no issue to enable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Sai Krishna Potthuri
b9c4e8d439 ARM: zynq: Replace 'io-standard' with 'power-source' property
Replace 'io-standard' property with 'power-source' property in all
zynq dts files to be in sync with Zynq Pinctrl driver.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Luis Araneda
9896dc6558 ARM: dts: zynq: correct and improve the model property of dt files
Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:00 +01:00
Javier Martinez Canillas
a3e10642da ARM: dts: zynq: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
c78a80ad13 arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
i2c muxes should described like this.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
051a8ad7bb arm: zynq: Sync up licenses with mainline kernel
Use different location for SPDX line. Also update dates for new mainline
DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
f5e2943b8b arm: zynq: Enable cadence driver on zc706
Enable watchdog with reset-on-timeout feature.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Sai Pavan Boddu
5fad1ab3d0 arm: zynq: Add device-type property for zynq ethernet phy nodes
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:07 +01:00
Michal Simek
cc7978bef9 ARM: zynq: Remove DTC 1.4.2 warnings
DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name,
but no reg property

This patch is fixing them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:38 +01:00
Michal Simek
a95d54b490 ARM: zynq: Align spi and qspi node locations
Keep nodes alphabelitally sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13 18:29:02 +02:00
Christian Kohn
ac2c407490 ARM: zynq: zc706: Add adv7511 on i2c bus
Add missing adv7511 and configure to match Base TRD.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
936bbc5d16 ARM: zynq: Fix bootargs in board dtsi
- Sync with Linux kernel
- Remove rootfs
- Remove earlyprintk

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Nathan Rossi
cb204a69d6 ARM: zynq: Enable u-boot,dm-pre-reloc for qspi
Enable u-boot,dm-pre-reloc for qspi for zc706, zed and microzed.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:05 +01:00
Michal Simek
8647219b5c ARM: zynq: Enable u-boot,dm-pre-reloc for sdhci
Enable u-boot,dm-pre-reloc for sdhci for zc706, zed and zybo.
And create aliases for it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-18 13:15:57 +01:00
Simon Glass
035c6b271d arm: zynq: dts: Add U-Boot device tree additions
We need to mark some device tree nodes so that they are available before
relocation. This enables driver model to find these automatically. In the
case of SPL it ensures that these nodes will be retained in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Jagan Teki
e94c71c075 dts: zc706: Enable zynq qspi controller node
Enabled zynq qspi controller node for zc706 board.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-10-25 20:17:02 +05:30
Michal Simek
999667ca9c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
Syncup with the latest DT from the Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:25 +02:00
Masahiro Yamada
9f9d41bad1 zynq: add UART nodes to device tree to initialize UART with OF
Commit c9416b92 added OF UART initialization support
but aliases nodes are missing in device tree.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
Tested-by: Michal Simek <michal.simek@xilinx.com> [on ZC702 board]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:31 +02:00
Masahiro Yamada
7d34c5de72 zynq: add memory nodes to device tree to initialize DRAM with OF
Commit 9e0e37ac added OF RAM initialization support
but memory nodes are missing in device tree.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
Tested-by: Michal Simek <michal.simek@xilinx.com> [on ZC702 board]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:30 +02:00
Masahiro Yamada
5ab502cb89 dts: move device tree sources to arch/$(ARCH)/dts/
Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.

I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.

For example, before this commit, board/xilinx/dts directory
had both Microblaze dts (microblaze-generic.dts) and
ARM dts (zynq-*.dts), which are totally unrelated.

This commit moves *.dts to arch/$(ARCH)/dts/ directories,
allowing us to describe nicely mutiple DTBs generation in the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:05 -05:00
Renamed from board/xilinx/dts/zynq-zc706.dts (Browse further)