Commit graph

114 commits

Author SHA1 Message Date
Thomas Chou
d52ebf1022 mmc: add generic mmc spi driver
This patch supports mmc/sd card with spi interface. It is based on
the generic mmc framework. It works with SDHC and supports multi
blocks read/write.

The crc checksum on data packet is enabled with the def,

There is a subcomamnd "mmc_spi" to setup spi bus and cs at run time.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-04-13 06:35:22 -05:00
Sandeep Paulraj
57418d2139 Davinci MMCSD Support
Added support for MMC/SD cards for Davinci.  This feature is enabled by
CONFIG_DAVINCI_MMC and is dependant on CONFIG_MMC and CONFIG_GENERIC_MMC
options. This is tested on DM355 and DM365 EVMs with both the available mmc
controllers.

Signed-off-by: Alagu Sankar <alagusankar@embwise.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-02-02 00:54:44 +01:00
Jerry Huang
4a6ee172c3 fsl_esdhc: Use mmc_set_clock to set initial speed
After booting the u-boot, and first using some SD card (such as Sandisk 2G SD
card), because the field 'clock' of struct mmc is zero, this will cause
the read transfer is always active and SDHC DATA line is always active,
therefore, driver can't handle the next command.

Therefore, we use mmc_set_clock to setup both the data structure and HW
to the initial clock speed of 400000Hz.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-12-18 23:15:21 +01:00
Reinhard Meyer
1592ef8596 AT91: MCI: add SD/MMC driver using mmc framework
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-09-03 11:19:01 +02:00
Steve Sakoman
89716964d9 mmc: add function prototype for mmc_set_dev in mmc.h
this eliminates compiler warnings when cmd_mmc.c is built with CONFIG_SYS_MMC_SET_DEV

the mmc_set_dev implementation in omap3_mmc.c is also tweaked to match
the new prototype in parameter naming and type

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-07-05 20:00:32 -04:00
Stefano Babic
11fdade294 MMC: add weak function to detect MMC/SD card
Most controllers can check if there is a card in the slot.
However, they require pins that could be not available because
required by other functions and the detection of a card must
be performed in another way. This patch adds a weak function
that a board can implement to add its internal custom way
to check the presence of a MMC/SD card.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-03-07 12:36:36 -06:00
Albin Tonnerre
79b91de958 include/mmc.h: Fix typo in IS_SD() macro
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2009-08-23 22:11:30 +02:00
Rabin Vincent
0b453ffe28 mmc: fix response decoding on little endian
The mmc code defines the response as an array of chars.  However, it
access the response bytes both as (i) an array of four uints (with
casts) and (ii) as individual chars.  The former case is used more
often, including by the driver when it assigns the response.

The char-wise accesses are broken on little endian systems because they
assume that the bytes in the uints are in big endian byte order.

This patch fixes this by changing the response to be an array of four
uints and replacing the char-wise accesses with equivalent uint-wise
accesses.

Signed-off-by: Rabin Vincent <rabin@rab.in>
2009-06-02 17:18:57 -05:00
Andy Fleming
272cc70b21 Add MMC Framework
Here's a new framework (based roughly off the linux one) for managing
MMC controllers.  It handles all of the standard SD/MMC transactions,
leaving the host drivers to implement only what is necessary to
deal with their specific hardware.

This also hooks the infrastructure into the PowerPC board code
(similar to how the ethernet infrastructure now hooks in)

Some of this code was contributed by Dave Liu <daveliu@freescale.com>

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:41 -06:00
Andy Fleming
1de97f9856 Eliminated arch-specific mmc header requirement
The current MMC infrastructure relies on the existence of an
arch-specific header file.  This isn't necessary, and a couple
drivers were forced to implement dummy files to meet this requirement.
Instead, we move the stuff in those header files into a more appropriate
place, and eliminate the stubs and the #include of asm/arch/mmc.h

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:41 -06:00
Andy Fleming
abb5466ccf Convert mmc_init to mmc_legacy_init
This is to get it out of the way of incoming MMC framework

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:40 -06:00
Andy Fleming
b2e2ed0233 Eliminate support for using MMC as memory
MMC cards are not memory, so we stop treating them that way.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:40 -06:00
Haavard Skinnemoen
341188b9cc MMC: Consolidate MMC/SD command definitions
This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.

There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.

Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-28 22:40:15 +02:00
wdenk
71f9511803 * Fix CONFIG_NET_MULTI support in include/net.h
* Patches by Kyle Harris, 13 Mar 2003:
  - Add FAT partition support
  - Add command support for FAT
  - Add command support for MMC
  ----
  - Add Intel PXA support for video
  - Add Intel PXA support for MMC
  ----
  - Enable MMC and FAT for lubbock board
  - Other misc changes for lubbock board
2003-06-15 22:40:42 +00:00