Commit graph

2032 commits

Author SHA1 Message Date
Grygorii Strashko
79d8127168 driver: net: ti: keystone_net: switch to use common mdio lib
Update TI Keystone 2 driver to re-use common mdio lib.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:01 -06:00
Grygorii Strashko
4f41cd9a95 driver: net: ti: cpsw: switch to use common mdio lib
Update TI CPSW driver to re-use common mdio lib

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:01 -06:00
Grygorii Strashko
6c4bbccc6e driver: net: ti: introduce common mdio support library
All existing TI SoCs network HW have similar MDIO implementation, so
introduce common mdio support library which can be reused by TI networking
drivers.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:42:00 -06:00
Grygorii Strashko
cbec53b434 driver: net: ti: cpsw: update to use SPDX identifier
Update to use SPDX license identifier.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:00 -06:00
Grygorii Strashko
af0cf2178b drivers: net: keystone_net: drop non dm code
Networking support for all TI K2 boards converted to use DM model and
CONFIG_DM_ETH enabled in all corresponding defconfig files, hence drop
unused non DM K2 networking code.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:00 -06:00
Grygorii Strashko
6a256a8ed4 configs: net: convert DRIVER_TI_KEYSTONE_NET kconfig
Convert DRIVER_TI_KEYSTONE_NET to Kconfig.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:41:59 -06:00
Grygorii Strashko
ffad5fa0cd driver: net: consolidate ti's code in separate folder
Add drivers/net/ti/ folder and move all TI's code in this folder for better
maintenance.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:41:59 -06:00
Quentin Schulz
05bbd676a7 net: phy: mscc: add support for VSC8574 PHY
The VSC8574 PHY is a 4-port PHY that is 10/100/1000BASE-T, 100BASE-FX,
1000BASE-X and triple-speed copper SFP capable, can communicate with
the MAC via SGMII, QSGMII or 1000BASE-X, supports WOL, downshifting and
can set the blinking pattern of each of its 4 LEDs, supports SyncE as
well as HP Auto-MDIX detection.

This adds support for 10/100/1000BASE-T and SGMII/QSGMII link with the
MAC.

The VSC8574 has also an internal Intel 8051 microcontroller whose
firmware needs to be patched when the PHY is reset. If the 8051's
firmware has the expected CRC, its patching can be skipped. The
microcontroller can be accessed from any port of the PHY, though the CRC
function can only be done through the PHY that is the base PHY of the
package (internal address 0) due to a limitation of the firmware.

The GPIO register bank is a set of registers that are common to all PHYs
in the package. So any modification in any register of this bank affects
all PHYs of the package.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:59 -06:00
Quentin Schulz
b5bca65e19 net: phy: mscc: factorize part of config function for VSC8584
Part of the config is common between the VSC8584 and the VSC8574, so to
prepare for the upcoming support of VSC8574, use the phy_device.priv
pointer that will keep the function that holds code that is PHY-specific
and that should be called during config function.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:58 -06:00
Quentin Schulz
04087fc494 net: phy: mscc: add support for VSC8584 PHY
The VSC8584 PHY is a 4-port PHY that is 10/100/1000BASE-T, 100BASE-FX,
1000BASE-X and triple-speed copper SFP capable, can communicate with the
MAC via SGMII, QSGMII or 1000BASE-X, supports downshifting and can set
the blinking pattern of each of its 4 LEDs, supports hardware offloading
of MACsec and supports SyncE as well as HP Auto-MDIX detection.

This adds support for 10/100/1000BASE-T and SGMII/QSGMII link with the
MAC.

The VSC8584 has also an internal Intel 8051 microcontroller whose
firmware needs to be patched when the PHY is reset. If the 8051's
firmware has the expected CRC, its patching can be skipped. The
microcontroller can be accessed from any port of the PHY, though the CRC
function can only be done through the PHY that is the base PHY of the
package (internal address 0) due to a limitation of the firmware.

The GPIO register bank is a set of registers that are common to all PHYs
in the package. So any modification in any register of this bank affects
all PHYs of the package.

The revA of the VSC8584 PHY (which is not and will not be publicly
released) should NOT patch the firmware of the microcontroller or it'll
make things worse, the easiest way is just to not support it.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:58 -06:00
Cédric Le Goater
e6ddacc2d0 net: ftgmac100: Add support for the Aspeed SoC
The Faraday ftgmac100 MAC controllers as found on the Aspeed SoCs have
some slight differences in the HW interface (End-Of-Rx/Tx-Ring bits).

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:58 -06:00
Cédric Le Goater
1c0c61e927 net: ftgmac100: add clock support
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:57 -06:00
Cédric Le Goater
d0e0b84c66 net: ftgmac100: handle timeouts when transmitting
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:57 -06:00
Cédric Le Goater
e766849713 net: ftgmac100: convert the RX/TX descriptor arrays
Use simple arrays under the device priv structure to hold the RX and
TX descriptors and handle memory coherency by invalidating or flushing
the d-cache when required.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:57 -06:00
Cédric Le Goater
538e75d3fc net: ftgmac100: add MDIO bus and phylib support
Implement the MDIO bus read/write functions using the readl_poll_timeout()
routine, initialize the bus and scan for the PHY. RGMII and RMII mode
are supported.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:57 -06:00
Cédric Le Goater
591ffd98b0 net: ftgmac100: use setbits_le32() in the reset method
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Cédric Le Goater
f95de0bd10 net: ftgmac100: convert to driver model
The driver is based on the previous one and the code is only adapted
to fit the driver model. The support for the Faraday ftgmac100
controller is the same with MAC and MDIO bus support for RGMII/RMII
modes.

Configuration is updated to enable compile again. At this stage, the
driver compiles but is not yet functional.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Cédric Le Goater
3bd796351f net: ftgmac100: use the aligned() macro
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Cédric Le Goater
f72b4a3dde net: ftgmac100: use the BIT() macro
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Stefan Roese
c895ef4650 net: Add MT7628 ethernet driver
This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs
(e.g. MT7628 and MT7688), including a minimum setup of the integrated
switch. This driver is loosly based on the driver version included in
this MediaTek github repository:

https://github.com/MediaTek-Labs/linkit-smart-uboot.git

Tested on the MT7688 LinkIt smart-gateway and on the
Gardena-smart-gateway.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Frank Wunderlich <frankwu@gmx.de>
Cc: Weijie Gao <hackpascal@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Bin Meng
db148f2a69 powerpc: t1040: Correct RCW EC2 settings
Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2
settings.

- The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should
  be 0x04000000 (value of 1 in RCW bit [420:421])
- Value of 2/3 are reserved in RCW bit [420:421], hence there is no
  macro FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-10-29 13:19:43 -07:00
Patrick Delaunay
22929e1266 drivers: cosmetic: Convert SPDX license tags to Linux Kernel style
Complete in the drivers directory the work started with
commit 83d290c56f ("SPDX: Convert all of our single
license tags to Linux Kernel style").

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-28 09:26:39 -04:00
Anatolij Gustschin
58ec4d3342 net: fec_mxc: add support for i.MX8X
Add compatible property and enable the FEC ipg clock when probing
on i.MX8X. Add specific function for reading FEC clock rate via
clock driver when configuring MII speed register. Allow FEC_MXC
selection for i.MX8.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:38 -05:00
Baruch Siach
18593fa80b net: mvpp2: increase PHY reset pulse
The default Linux PHY reset delay is 10ms. This is also the requirement
for Marvell 88E151x PHYs, which are likely to be used with this Ethernet
MAC.

Cc: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-10-24 14:45:38 -05:00
Baruch Siach
fa14027d5c net: mvpp2: fix polarity of PHY reset signal
The dm_gpio_set_value() call sets the logical level of the GPIO signal.
That is, it takes the GPIO_ACTIVE_{LOW,HIGH} property into account. The
driver needs to assert the reset, and then deassert it. Not the other
way around.

Cc: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-10-24 14:45:38 -05:00
Martin Fuzzey
0126c641e8 net: dm: fec: Obtain the transceiver type from the DT
The DT property "phy-mode" already provides the transceiver type.
Use it so that we do not have to also set CONFIG_FEC_XCV_TYPE

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Martin Fuzzey
ad8c43cbca net: dm: fec: Support the phy-supply binding
Configure the phy regulator if defined by the "phy-supply" DT phandle.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Martin Fuzzey
331fcabe4f net: dm: fec: Fix phy-reset-duration clamping and defaults
The DT binding says:
- phy-reset-duration : Reset duration in milliseconds.  Should present
  only if property "phy-reset-gpios" is available.  Missing the property
  will have the duration be 1 millisecond.  Numbers greater than 1000 are
  invalid and 1 millisecond will be used instead.

However the current code:
 - clamps values greater than 1000ms to 1000ms rather than 1.
 - does not initialize the delay if the property does not exist
   (else clause mismatch)
 - returns an error if phy-reset-gpios is not defined

Fix all this and simplify by using dev_read_u32_default()

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Martin Fuzzey
9b8b918884 net: dm: fec: Fix time unit error in phy-reset-duration
The DT binding says that phy-reset-duration is in ms, but the driver
currently uses udelay().

Switch to mdelay() to fix this.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Jeremy Gebben
30a2c8cca8 net: phy: aquantia: autodetect if firmware needs to be loaded
If the phy reports a valid firmware version and doesn't indicate
a fault, skip loading the firmware.  This allows the same image
to be used on boards that have firmware storage and those that do not.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Jeremy Gebben
4506423ad2 net: phy: aquantia: add firmware loading support
Aquantia phys have firmware that can be loaded automatically
from storage directly attached to the phy or via MDIO commands.
Add support for loading firmware from either a file or a
raw location on an MMC device.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:37 -05:00
Jeremy Gebben
1c6501088e configs: migrate CONFIG_PHY_AQUANTIA to Kconfig
The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:36 -05:00
Michal Simek
3dc80934f4 net: gem: Do not setup any clock for Xilinx SoC Versal
Xilinx SoC Versal is using fixed clock where setting rate is not supported.
That's why workaround the driver till real clock driver is supported.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:24 +02:00
Michal Simek
ec48b6c991 arm64: versal: Add support for new Xilinx Versal ACAPs
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.

The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:21 +02:00
Tom Rini
15f22ac2ee ldpaa_eth.c: Fix warning when PHYLIB is not enabled
We need to #ifdef some variables to avoid warning about them being
unused.

Fixes: 1a048cd656 ("driver: net: fsl-mc: Add support of multiple phys for dpmac")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-12 07:41:24 -04:00
Pankaj Bansal
1a048cd656 driver: net: fsl-mc: Add support of multiple phys for dpmac
Till now we have had cases where we had one phy device per dpmac.
Now, with the upcoming products (LX2160AQDS), we have cases, where there
are sometimes two phy devices for one dpmac. One phy for TX lanes and
one phy for RX lanes. to handle such cases, add the support for multiple
phys in ethernet driver. The ethernet link is up if all the phy devices
connected to one dpmac report link up. also the link capabilities are
limited by the weakest phy device.

i.e. say if there are two phys for one dpmac. one operates at 10G without
autoneg and other operate at 1G with autoneg. Then the ethernet interface
will operate at 1G without autoneg.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:45:28 -05:00
Pankaj Bansal
1ed19a1421 driver: net: fsl-mc: initialize dpmac irrespective of phy
The dpmac initalization should not depend on phy.
As the phy is not necessary to be present for dpmac to function.
Therefore, remove dpmac initialization dependency from phy.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:45:23 -05:00
Pankaj Bansal
a3cb5340f1 driver: net: fsl-mc: Modify the dpmac link detection method
when there is no phy present for a dpmac, a dummy phy device is created.
when we move to multiple phy method, we need to create as many dummy phy
devices.

Change this method so that we don't need to create dummy phy devices.
We always report linkup if no phy is present.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:45:01 -05:00
Pankaj Bansal
f259c43d89 driver: net: fsl-mc: fix error handing in init_phy
if an error occurs during init_phy, we should free the phydev structure
which has been allocated by phy_connect.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:43:18 -05:00
Pankaj Bansal
d75e81d9e0 driver: net: fsl-mc: remove unused strcture elements
The phydev structure is present in both ldpaa_eth_priv and
wriop_dpmac_info. the phydev in wriop_dpmac_info is not being used

As the phydev is created based on phy_addr and bus members of
wriop_dpmac_info, it is appropriate to keep phydev in wriop_dpmac_info.

Also phy_regs is not being used, therefore remove it

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:36:34 -05:00
Pankaj Bansal
afd6c6b470 driver: net: fsl-mc: modify the label name
The goto label name is misspelled it should be DPMAC not DPAMC

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:30:28 -05:00
Joe Hershberger
72ff004258 test: eth: Add a test for the target being pinged
The target will respond to pings while doing other network handling.
Make sure that the response happens and is correct.

This currently corrupts the ongoing operation of the device if it
happens to be awaiting an ARP reply of its own to whatever serverip it
is attempting to communicate with. In the test, add an expectation that
the user operation (ping, in this case) will fail. A later patch will
address this problem.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:29:00 -05:00
Joe Hershberger
45988dae4c test: eth: Add a test for ARP requests
This tests that ARP requests made to this target's IP address are
responded-to by the target when it is doing other networking operations.

This currently corrupts the ongoing operation of the device if it
happens to be awaiting an ARP reply of its own to whatever serverip it
is attempting to communicate with. In the test, add an expectation that
the user operation (ping, in this case) will fail. A later patch will
address this problem.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:29:00 -05:00
Joe Hershberger
9cbe5972c3 net: sandbox: Add a priv ptr for tests to use
Tests need to be able to pass their "unit test state" to the handlers
where asserts are evaluated. Add a function that allows the tests to set
this private data on the sandbox eth device.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:59 -05:00
Joe Hershberger
c67a420781 net: sandbox: Allow fake eth to handle more than 1 packet response
Use up to the max allocated receive buffers so as to be able to test
more complex situations.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:58 -05:00
Joe Hershberger
76a503439e net: sandbox: Share the priv structure with tests
If tests want to implement tx handlers, they will likely need access to
the details in the priv structure.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:57 -05:00
Joe Hershberger
c7eb733d60 net: sandbox: Make the fake eth driver response configurable
Make the send handler registerable so tests can check for different
things.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:57 -05:00
Joe Hershberger
e95bb16110 net: sandbox: Refactor sandbox send function
Make the behavior of the send function reusable.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:56 -05:00
Joe Hershberger
e4ab9a6508 net: sandbox: Move disabled flag into priv struct
Store the per-device data with the device.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:56 -05:00
Janine Hagemann
0f347a0096 net: phy: ti: Add binding for the CLK_OUT pin muxing
The DP83867 has a muxing option for the CLK_OUT pin. It is possible
to set CLK_OUT for different channels.
Create a binding to select a specific clock for CLK_OUT pin.

Based on commit 9708fb630d19 ("net: phy: dp83867: Add binding for
the CLK_OUT pin muxing option") of mainline linux kernel.

Signed-off-by: Janine Hagemann <j.hagemann@phytec.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:28:54 -05:00