Commit graph

616 commits

Author SHA1 Message Date
Wolfgang Denk
f4d9f2da2a 4xx_enet.c: fix GCC 4.6 build warnings
Fix:
4xx_enet.c: In function 'enet_rcv':
4xx_enet.c:1772:21: warning: variable 'ef_ptr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
2011-11-03 20:40:00 +01:00
Wolfgang Denk
3d458d2dfb drivers/net/eepro100.c: fix GCC 4.6 build warnings
Fix:
eepro100.c: In function 'read_hw_addr':
eepro100.c:926:6: warning: variable 'eeprom' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:39:35 +01:00
Wolfgang Denk
675b46bbac drivers/net/ns8382x.c: fix GCC 4.6 build warnings
Fix:
ns8382x.c: In function 'ns8382x_check_duplex':
ns8382x.c:704:6: warning: variable 'hun' set but not used
[-Wunused-but-set-variable]

To fix this, we get rid of the NS8382X_DEBUG code and use standard
debug() instead.

This will now trigger a so far undetected warning:
ns8382x.c:780:2: warning: format '%X' expects argument of type
'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat]

Fix that, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:38:49 +01:00
Wolfgang Denk
7a34106611 e1000: fix bugs from recent commits
Commit 114d7fc0 "e1000: Rewrite EEPROM checksum error to give more
information" failed to initialize the checksum variable which should
result in random results. Fix that.

Commit 2326a94d caused a ton of "unused variable 'x'" warnings.
Fix these.  While we are at it, remove some bogus parens.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-11-03 20:33:19 +01:00
Kyle Moffett
ce5207e191 e1000: Allow direct access to the E1000 SPI EEPROM device
As a part of the manufacturing process for some of our custom hardware,
we are programming the EEPROMs attached to our Intel 82571EB controllers
from software using U-Boot and Linux.

This code provides several conditionally-compiled features to assist in
our manufacturing process:

  CONFIG_CMD_E1000:
    This is a basic "e1000" command which allows querying the controller
    and (if other config options are set) performing EEPROM programming.
    In particular, with CONFIG_E1000_SPI this allows you to display a
    hex-dump of the EEPROM, copy to/from main memory, and verify/update
    the software checksum.

  CONFIG_E1000_SPI_GENERIC:
    Build a generic SPI driver providing the standard U-Boot SPI driver
    interface.  This allows commands such as "sspi" to access the bus
    attached to the E1000 controller.  Additionally, some E1000 chipsets
    can support user data in a reserved space in the E1000 EEPROM which
    could be used for U-Boot environment storage.

  CONFIG_E1000_SPI:
    The core SPI access code used by the above interfaces.

For example, the following commands allow you to program the EEPROM from
a USB device (assumes CONFIG_E1000_SPI and CONFIG_CMD_E1000 are enabled):
  usb start
  fatload usb 0 $loadaddr 82571EB_No_Mgmt_Discrete-LOM.bin
  e1000 0 spi program $loadaddr 0 1024
  e1000 0 spi checksum update

Please keep in mind that the Intel-provided .eep files are organized as
16-bit words.  When converting them to binary form for programming you
must byteswap each 16-bit word so that it is in little-endian form.

This means that when reading and writing words to the SPI EEPROM, the
bit ordering for each word looks like this on the wire:

  Time >>>
------------------------------------------------------------------
  ... [7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8], ...
------------------------------------------------------------------
  (MSB is 15, LSB is 0).

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:37:01 +02:00
Kyle Moffett
2326a94db1 e1000: Export core EEPROM access functions for SPI support
A followup patch will be adding a configurable feature to enable
programming of E1000 EEPROMs from the command line or via the generic
U-Boot SPI interface.

In order for it to work it needs access to certain E1000-internal
functions, so export those in the e1000.h header file.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:35:26 +02:00
Kyle Moffett
114d7fc053 e1000: Rewrite EEPROM checksum error to give more information
As an aide to debugging, we should print out the expected value of the
EEPROM checksum in addition to just saying that it is wrong.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:35:08 +02:00
Kyle Moffett
d60626f8c1 e1000: Restructure and streamline PCI device probing
By allocating the e1000 device structures much earlier, we can easily
generate better error messages and siginficantly clean things up.

The only user-visable change (aside from reworded error messages) is
that a detected e1000 device which fails to initialize due to software
or hardware error will still be allocated a device number.

As one example, consider a system with 2 e1000 PCI devices where the
first controller has a corrupted EEPROM.  Using the old code the
second controller would be "e1000#0", while with this change it would be
"e1000#1".

This change should hopefully make such EEPROM errors much more
straightforward to handle correctly in boot scripts and the like.

It is also necessary for a followup patch which allows SPI programming
of an e1000 controller's EEPROM even if the checksum is invalid.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-10-28 00:34:40 +02:00
Kyle Moffett
987b43a1d7 e1000: Clean up handling of dual-port NICs and support 82571
Consolidate the test for a dual-port NIC to one location for easy
modification, then fix support for the dual-port 82571.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-10-28 00:34:25 +02:00
Wolfgang Denk
87a5d60103 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
2011-10-28 00:15:19 +02:00
Marek Vasut
eda959f340 GCC4.6: Squash warnings in fec_mxc.c
fec_mxc.c: In function 'fec_mii_setspeed':
fec_mxc.c:112:2: warning: format '%#lx' expects type 'long unsigned int', but
argument 2 has type 'u32'
fec_mxc.c: In function 'fec_recv':
fec_mxc.c:632:2: warning: format '%x' expects type 'unsigned int', but argument
2 has type 'long unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:08 +02:00
Marek Vasut
99724a2d91 GCC4.6: Squash warnings in ks8695eth.c
ks8695eth.c:199:2: warning: format '%x' expects type 'unsigned int', but
argument 4 has type 'volatile void *'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:07 +02:00
Marek Vasut
c97e74afcb GCC4.6: Squash warnings in 4xx_enet.c
4xx_enet.c: In function 'ppc_4xx_eth_init':
4xx_enet.c:1352: warning: format '%08x' expects type 'unsigned int', but
argument 2 has type 'volatile struct mal_desc_t *'
4xx_enet.c:1352: warning: format '%08x' expects type 'unsigned int', but
argument 3 has type 'volatile struct mal_desc_t *'
4xx_enet.c:1365: warning: format '%08lx' expects type 'long unsigned int', but
argument 3 has type 'unsigned int'
4xx_enet.c:1376: warning: format '%08lx' expects type 'long unsigned int', but
argument 3 has type 'unsigned int'

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:04 +02:00
Manjunath Hadli
fb1d6332b5 davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
remove macro CONFIG_EMAC_MDIO_PHY_NUM and depending macro EMAC_MDIO_PHY_NUM
as they are no longer needed with the support for more than 1 PHYs in davinci
emac driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Manjunath Hadli
062fe7d332 davinci: emac: add support for more than 1 PHYs
add support for more than 1 PHYs. Many of the davinci platforms have more
than 1 PHYs on thier board. This patch extends support in davinci emac
driver for upto 3 PHYs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Manjunath Hadli
cc4bd47f4f davinci: emac: add new features to autonegotiate for EMAC
add more features like DUPLEX, 100MB link speed etc to auto negotiate
in EMAC driver. EMAC controller autonegotiates for these features with
PHYs which are on the board.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:36 +02:00
Lei Wen
a7efd719f4 ARM: kirkwood: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the
platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the
definition in the platform definition files.

Include the platform definition file in the config file, so that it
would decouple the dependence for the driver files.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Joachim Foerster
70d52f9a4e altera_tse: Fix return of eth_device's recv() callback
It seems to be good practice to return the number of received bytes in the
eth_device's recv() callback, here: tse_eth_rx().

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:29:08 +02:00
Joachim Foerster
15eb106966 altera_tse: m88e1111s: Honor device flags regarding PHY interface mode
Note: This is kind of guess work. The current code is preserved for
all RGMII related modes. It is different for flags=0 (GMII) and flags=5
(SGMII). The last case, SGMII, is successfully tested on
Altera's Terasic DE4.

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:28:18 +02:00
Joachim Foerster
b962ac794a altera_tse: Add support for dedicated descriptor memory
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:27:37 +02:00
Joachim Foerster
29095f1a5c altera_tse: Fix SGDMA reset triggering
The SW_RESET needs to be set instead of being masked out!

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:26:48 +02:00
Joachim Foerster
337aff53f6 altera_tse: Clear SGDMA's RUN bit in async transfer, like in sync case
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26 21:25:42 +02:00
Mike Frysinger
5de78b17f0 net: sc589: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
c1761eeab0 net: s3c4510b_eth: drop unused !NET_MULTI driver
No boards appear to use this driver, and it doesn't support NET_MULTI,
so punt the old driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
8b710b163b net: ns9750: drop !NET_MULTI driver
Only one board uses this driver (ns9750dev), but the board doesn't seem
to have an entry to actually build it in the Makefile/boards.cfg, so just
delete net support from its board config.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Mike Frysinger
ae6edb54c0 net: enc28j60_lpc2292: drop unused !NET_MULTI driver
Everyone seems to have converted to the new enc28j60 driver, so drop
this older one which isn't used and doesn't support NET_MULTI.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:34:20 +02:00
Michal Simek
c1044a1ec1 net: emaclite: Move RX/TX ping pong initialization to
Init RX/TX ping pong directly from board not in the driver.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23 23:32:44 +02:00
Michal Simek
9b94755af9 net: emaclite: Use unsigned long for baseaddr
Baseaddr should be unsigned long.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23 23:32:44 +02:00
Anatolij Gustschin
c4c9fbebae consolidate mdelay by providing a common function for all users
There are several mdelay() definitions in the driver and
board code. Remove them all and provide a common mdelay()
in lib/time.c.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:16:08 +02:00
Linus Walleij
df6a36fbef net: dc2114x: check for apropriate command
The code had two paths depending on whether the card was to be
accessed from plain memory or the IO region. However the error
path checks whether IO region was obtained - twice. Fix up the
error path according to the probable intention.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-22 00:37:49 +02:00
Macpaul Lin
55b438a919 ftgmac100: reset fix when supports wake on lan
This patch move the reset function from initialization to
driver register procedure.

Some embedded system supports wake on lan nowadays. On this kind of system,
the ftgmac100 will be still supplied power after the system has been
shut-down by Linux. Hence the register used by linux won't be clear
when the system has been powered-off.

The origin ftgmac100 driver in u-boot will only register
driver and functions to network stack and won't reset the ftgmac100
hardware if the network won't be used during boot-up.
This will lead ftgmac100 continue receiving packets and then might corrupt
linux kernel when booting up.

So we reorder the hardware reset function earlier to force the hardware
to be reset whether it will be used or not.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22 00:36:12 +02:00
Timur Tabi
a836626cc4 powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
The work-around for P4080 erratum SERDES9 says that the SERDES receiver
lanes should be reset after the XAUI starts tranmitting alignment signals.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-20 16:01:37 -05:00
Kumar Gala
f5b9e73641 fm: Don't allow disabling of FM1-DTSEC1
The MDIO controller to talk to external PHYs is on FM1-DTSEC1 so don't
allow disabling.  If we disable it we end up powering the block down in
the SoC and thus can't communicate to any external PHYs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18 00:36:15 -05:00
Kumar Gala
e81c0aba9a fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
FM1-DTSEC1's MAC was being marked as disabled if the port was not
configured based on the SoC configuration.  However we utilize the MAC
interface for MDIO and thus should NOT mark it disabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18 00:36:15 -05:00
Jason Jin
5c1d082b14 DM9000:Add a byte swap macro for dm9000 io operation.
commit a45dde2293 changed the dm9000
direct register access to standard IO. This should work
on the ColdFire platform as there are corresponding macros for
the LE devices. But the hardware settings on some ColdFire boards had
swapped the byte order which make the original macros such as out_le16
cannot work. To avoid changing the common io access code on ColdFire
platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use
__raw* IO access on some ColdFire boards.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2011-10-17 22:25:33 +02:00
Michal Simek
4f1ec4c176 net: axi_ethernet: Add driver to u-boot
Add axi_ethernet driver for little-endian Microblaze.

RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs.
Only one MAC can work in one time.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-15 22:12:05 +02:00
Michal Simek
5ac83801f9 net: emaclite: Fix coding style
Coding style should follow linux coding style.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:09:43 +02:00
Michal Simek
8043925204 net: emaclite: Use PKTSIZE directly
Do not setup additional ENET_MAX_MTU macro.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:09:27 +02:00
Michal Simek
947324b9ca net: emaclite: Setup RX/TX ping pong for every instance
Setup RX/TX ping-pong buffer for every emaclite IP separately.
The next patch move initialization directly to board code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-15 22:06:38 +02:00
Timur Tabi
2339e4972f phylib: wait for TN2020 to achieve SERDES lane alignment at startup
Before the Teranetics TN2020 PHY can be used, the SERDES lanes need to be
aligned, so wait for lane alignment before completing the startup sequence.

Note that this process can take up to three seconds.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-13 23:38:11 -05:00
Timur Tabi
7f92c3a275 powerpc/p3060: remove all references to RCW bits EC1_EXT, EC2_EXT, and EC3
The EC1_EXT, EC2_EXT, and EC3 bits in the RCW don't officially exist on the
P3060 and should always be set to zero.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-13 23:38:10 -05:00
Timur Tabi
3038171628 powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHY
Function dtsec_configure_serdes() needs to know where the TBI PHY registers
are in order to configure SGMII for proper SerDes operation.

During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs'
when it called init_dtsec(), because it was believed that phyregs was not
used.  In fact, it is used by dtsec_configure_serdes() to configure the TBI
PHY registers.

We also need to define the PHY registers in struct fm_mdio.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-09 17:57:53 -05:00
Andy Fleming
ebfdacb42b phylib: Work around bug in Teranetics PHY
The Teranetics PHY does not properly report the link state
for fiber connections. The new PHY code actually checked the link,
and so the FM driver would refuse to talk over a linkless PHY.

But the link may actually be up, so now we always report it as up
for fiber connections on the tn2020.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-10-09 17:57:53 -05:00
Wolfgang Denk
bf513c2d75 drivers/net/smc91111.c: fix warning: variable ... set but not used
Fix:
smc91111.c: In function 'smc_phy_configure':
smc91111.c:1194:6: warning: variable 'failed' set but not used [-Wunused-but-set-variable]
smc91111.c:1190:7: warning: variable 'phyaddr' set but not used [-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-09 23:24:49 +02:00
Michael Walle
1a9845b4f0 netconsole: support packets longer than 512 bytes
Esp. while printing the environment the output is usually longer than 512
bytes. Instead of cutting the message, send multiple 512 bytes packets.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-09 23:24:48 +02:00
Mike Frysinger
e2a53458a7 net: drop !NET_MULTI code
This is long over due.  All but two net drivers have been converted, but
those have now been dropped.

The only thing left to do is actually delete all references to NET_MULTI
and code that is compiled when that is not defined.  So here we scrub the
core code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Mike Frysinger
d90f0c107b net: drop !NET_MULTI ns7520 driver
This driver was never converted to NET_MULTI, and no board uses it.
So punt it and be done.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:15 +02:00
Mike Frysinger
029cf6b4b2 net: drop !NET_MULTI bcm570x/tigon3 drivers
These drivers have never been converted to NET_MULTI, and they are only
used by one board (BMW).  So drop the drivers until someone feels like
rewriting them for NET_MULTI support.

Rather than punting the BMW board completely, just disable net support
in its board config.  Seems to build fine without it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:15 +02:00
Wolfgang Denk
1fed668b3f Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/p3060: Add SoC related support for P3060 platform
  powerpc/85xx: Add support for setting up RAID engine liodns on P5020
  powerpc/85xx: Refactor some defines out of corenet_ds.h
  fm-eth: Add ability for board code to disable a port
  powerpc/mpc8548: Add workaround for erratum NMG_LBC103
  powerpc/mpc8548: Add workaround for erratum NMG_DDR120
  powerpc/mpc85xxcds: Fix PCI speed
  powerpc/mpc8548cds: Fix booting message
  powerpc/p4080: Add support for secure boot flow
  powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH
  powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
  powerpc/p2041rdb: remove watch dog related codes
  powerpc/p2041rdb: updated description of cpld command
  powerpc/p2041rdb: add more ddr frequencies support
  powerpc/p2041rdb: set sysclk according to status of physical switch SW1
  powerpc/p2041rdb: update cpld reset command according to CPLD 2.0
  powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc8xxx: Add DDR2 to unified DDR driver
  powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
  powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
  powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
  powerpc/85xx: Refactor P2041RDB to use common p_corenet files
  powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
  powerpc/85xx: Enable CMD_REGINFO on corenet boards
  powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
  powerpc/85xx: Fix USB protocol definitions for P1020RDB
  powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
  powerpc/mpc8xxx: Move DDR RCW overriding to common code
  powerpc/mpc8xxx: Extend CWL table
  powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
  powerpc/85xx: Cleanup extern in corenet_ds board code
  powerpc/p2041rdb: Add ethernet support on P2041RDB board
  powerpc/85xx: Add networking support to P1023RDS
  powerpc/hydra: Add ethernet support on P5020/P3041 DS boards
  powerpc/85xx: Add FMan ethernet support to P4080DS
  powerpc/85xx: Add support for FMan ethernet in Independent mode
  powerpc/mpc8548cds: Cleanup mpc8548cds.c
  powerpc/mp: add support for discontiguous cores
  powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries
  fdt: Add new fdt_create_phandle helper
  fdt: Rename fdt_create_phandle to fdt_set_phandle
  powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set
  fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
  powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC)
  fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010)
  powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M
  powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
  nand: Freescale Integrated Flash Controller NAND support
  powerpc/85xx: Add basic support for P1010RDB
  powerpc/85xx: Add support for new P102x/P2020 RDB style boards
  powerpc/85xx: relocate CCSR before creating the initial RAM area
  powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
  powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0
  powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
2011-10-04 22:08:13 +02:00
Shengzhou Liu
6d7b061af1 powerpc/p3060: Add SoC related support for P3060 platform
Add P3060 SoC specific information:cores setup, LIODN setup, etc

The P3060 SoC combines six e500mc Power Architecture processor cores with
high-performance datapath acceleration architecture(DPAA), CoreNet fabric
infrastructure, as well as network and peripheral interfaces.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 09:36:28 -05:00
Kumar Gala
69a8524258 fm-eth: Add ability for board code to disable a port
The SoC configuration may have more ports enabled than a given board
actually can utilize.  Add a routinue that allows the board code to
disable a port that it knows isn't being used.

fm_disable_port() needs to be called before cpu_eth_init().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 08:52:15 -05:00
Michal Simek
773cfa8d08 net: emaclite: Use dynamic allocation
Every emaclite instance use own setting.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-03 08:04:14 +02:00
Michal Simek
8d95ddbb5e net: emaclite: Remove baseaddress from xemaclite
Use dev->iobase instead of baseaddress.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:04:14 +02:00
Michal Simek
28ae02e5af net: emaclite: Use calloc instead of malloc
Simplify driver logic and clear eth_device structure
in one command.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:04:14 +02:00
Michal Simek
be98696741 net: emaclite: Remove deviceid property
Cleanup structure.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:04:13 +02:00
Michal Simek
25a025518b net: emaclite: Change driver name and add address
Current xilinx emaclite use net multi registration
but doesn't support several emaclites interfaces.
Changing driver name with adding address to name
is the first step how to distiguish several drivers.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:04:13 +02:00
Marek Vasut
8edcc6f221 FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:03 +02:00
Marek Vasut
17fb268cf7 FEC: Squish "got MAC from fuse" message, make it debug()
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:02 +02:00
Marek Vasut
e382fb4873 FEC: Add timeout for chip reset
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:02 +02:00
Marek Vasut
2e5f44213f FEC: Allow registering MII postconfiguration callback
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:02 +02:00
Marek Vasut
9e27e9dca1 FEC: Allow multiple FECes
This patch allows user to register multiple FEC controllers. To preserve
compatibility with older boards, the mxcfec_register() call is still in place.
To use multiple controllers, new macro is in place, the mxcfec_register_multi(),
which takes more arguments. The syntax is:

mxcfec_register_multi(bd, FEC ID, FEC PHY ID on the MII bus, base address);

To disable the fecmxc_register() compatibility stuff, define the macro
CONFIG_FEC_MXC_MULTI. This will remove the requirement for defining IMX_FEC_BASE
and CONFIG_FEC_MXC_PHYADDR.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
d133b881b9 FEC: Abstract access to fec->eth in MII operations
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
392b850233 FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
The default is MII100, which was hardcoded previously in the driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
a50a90c90e FEC: Add RMII mode support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
9eb3770b7b FEC: Kill mode select FIXME's
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
77dbd6ab7f FEC: Use defined constant instead of magic number
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Marek Vasut
879cf26130 FEC: Use proper accessor to read register in debug call
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:01 +02:00
Heiko Schocher
19fdf9a1c3 net, davinci_emac: let the EMAC detect the PHYs
Once the MDIO state machine has been initialized and enabled, it
starts polling all 32 PHY addresses on the MDIO bus, looking for
an active PHY. Add a 5 ms delay, so all PHYs are for sure detected.

This problem was detected on the cmc board with a KSZ8864 switch.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-30 22:00:57 +02:00
Heiko Schocher
c3b4a475d7 net, davinci_emac: make less verbose - turn printf() into debug()
The PHY driver was too verbose and corrupted the boot message display
like this:

...
Net:   Ethernet PHY: KSZ8873 @ 0x02
DaVinci-EMAC
...

Turn printf() into debug() so we get the expected output again:

...
Net:   DaVinci-EMAC
...

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Paulraj Sandeep <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-30 22:00:56 +02:00
Heiko Schocher
4f3c42aca4 net, davinci_emac: add KSZ8864 switch
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Paulraj Sandeep <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-30 22:00:56 +02:00
Ajay Bhargav
79788bb19a net: Adds Fast Ethernet Controller driver for Armada100
This patch adds support for Fast Ethernet Controller driver for
Armada100 series.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2011-09-30 22:00:53 +02:00
Kumar Gala
c916d7c914 powerpc/85xx: Add support for FMan ethernet in Independent mode
The Frame Manager (FMan) on QorIQ SoCs with DPAA (datapath acceleration
architecture) is the ethernet contoller block.  Normally it is utilized
via Queue Manager (Qman) and Buffer Manager (Bman).  However for boot
usage the FMan supports a mode similar to QE or CPM ethernet collers
called Independent mode.

Additionally the FMan block supports multiple 1g and 10g interfaces as a
single entity in the system rather than each controller being managed
uniquely.  This means we have to initialize all of Fman regardless of
the number of interfaces we utilize.

Different SoCs support different combinations of the number of FMan as
well as the number of 1g & 10g interfaces support per Fman.

We add support for the following SoCs:
 * P1023 - 1 Fman, 2x1g
 * P4080 - 2 Fman, each Fman has 4x1g and 1x10g
 * P204x/P3041/P5020 - 1 Fman, 5x1g, 1x10g

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com>
Signed-off-by: Lei Xu <B33228@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-29 19:01:05 -05:00
Wolfgang Denk
0dcfb0fcb8 Revert "phylib: remove a couple of redundant code lines"
This reverts commit 041c542219.

The lines removed by this commit weren't redundant. The logic is (and
probably should be better commented):

Find the intersection of the advertised capabilities of both sides of
the link (lpa).
From that intersection, find the highest capability we can run at
(that will be the negotiated link).

Now imagine that the intersection (lpa) is (LPA_100HALF | LPA_10FULL).

The code will now set phydev->speed to 100, and phydev->duplex to 1,
but this link does not support 100FULL.

Kudos to Andy Fleming <afleming@gmail.com> for binging this to
attention and for the explanation.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-28 21:02:43 +02:00
Greg Ungerer
1e8ff7145c KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type
driver.

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
2011-09-10 16:10:34 +02:00
Vladimir Zapolskiy
041c542219 phylib: remove a couple of redundant code lines
This change slightly improves readability of the phydev speed/duplex
assignment logic.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-09-10 00:08:26 +02:00
Vladimir Zapolskiy
e3a77218a2 phylib: reset mii bus only if reset handler is registered
This change allows to cope with a mii bus device registered using
miiphy_register(), which doesn't assign a default reset handler.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-09-10 00:07:55 +02:00
Wolfgang Denk
24e1664472 smc911x: Fix build warnings
Commit 6af1d41 "smc911x MII made available" was missing a few "const"
qualifiers.  Fix the resulting in build warnings:

smc911x.c: In function 'smc911x_initialize':
smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type
smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Helmut Raiger <helmut.raiger@hale.at>
2011-09-09 23:57:24 +02:00
Helmut Raiger
6af1d41a46 smc911x MII made available
The driver already had the MII functions, but they have not been
registered using miiphy_register().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
2011-09-07 23:49:58 +02:00
Nagabhushana Netagunte
ba511f779a da850: fix the channel number for EMAC teardown init
TX and RX channel numbers programmed as '1' during EMAC
teardown initialization is wrong. This patch fixes the
same by setting channel number to '0' which is used by U-boot.

Signed-off-by: Sugumar Natarajan <sugumar@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-04 11:36:19 +02:00
Wolfgang Denk
b91a9d9d4d phy.c: make less verbose - turn printf() into debug()
The PHY driver was too verbose and corrupted the boot message display
like this:

	...
	Net:   TSEC0 connected to Marvell 88E1111S
	TSEC1 connected to Marvell 88E1111S
	TSEC0, TSEC1
	...

Turn printf() into debug() so we het the expected output again:

	...
	Net:   TSEC0, TSEC1
	...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
2011-08-31 22:35:27 +02:00
Simon Glass
7616e78508 Add Ethernet hardware MAC address framework to usbnet
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).

This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
2011-08-08 21:05:23 +02:00
Wolfgang Denk
0886eef9ba Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
* 'master' of git://git.denx.de/u-boot-ppc4xx:
  net/4xx: Install interrupt handler after driver registration
2011-08-02 21:52:21 +02:00
Mike Williams
1626308797 cleanup: Fix typos and misspellings in various files.
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address

Signed-off-by: Mike Williams <mike@mikebwilliams.com>
2011-07-28 21:27:36 +02:00
Stefan Roese
3ce04d9bba net/4xx: Install interrupt handler after driver registration
Only install der 4xx-EMAC interrupt handlers *after* the core
network driver is registered.

This problem was noticed on the APM Taishan 440GX board, where
the board hung upon bootup after displaying "Net:".

Signed-off-by: Stefan Roese <sr@denx.de>
2011-07-28 19:16:16 +02:00
Phil Edworthy
af5de5d772 net: Add SMSC89128 support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
2011-07-27 23:27:43 +02:00
Andy Fleming
ee8fa20f54 phylib: Detect link on 10G devices correctly
gen10g_startup() had 2 bugs:

1) It had a boolean logic error in checking the MMD mask, and
always checked all of them.

2) It checked devices which don't actually report link state, which
meant that it would never believe the link was fully up.

Fix the boolean logic, and then mask the MMD mask so only link-reporting
devices are checked.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2011-07-27 23:21:25 +02:00
Mike Frysinger
f0ece9e934 net: designware: fix uninitialized phy_addr usage
When CONFIG_DW_SEARCH_PHY is disabled, the local phy_addr variable
never gets initialized which causes random behavior at runtime and a
gcc warning.  So set it by default to the stored phy address.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>

Fix commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-07-25 22:20:10 +02:00
Mike Frysinger
ee7f5bfd12 net: designware: fix unused warning when CONFIG_DW_AUTONEG is enabled
The ctrl variable is only used when autoneg support is disabled, so only
declare it under those conditions to avoid an unused variable warning.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Vipin Kumar <vipin.kumar@st.com>
2011-07-25 22:19:40 +02:00
Graeme Russ
a60d1e5b8e Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-07-16 11:55:00 +02:00
andreas.devel@googlemail.com
6c169c12d7 macb: fix compile warning
This patch fixes following compile warning:

---8<---
macb.c: In function 'macb_write_hwaddr':
macb.c:525:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-21 22:26:22 +02:00
andreas.devel@googlemail.com
2321bfe425 at91_emac: fix compile warning
This patch removes the warning

---8<---
at91_emac.c: In function 'at91emac_write_hwaddr':
at91_emac.c:487:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-21 22:26:22 +02:00
Jens Scharsig
8073399444 update arm/at91rm9200 work with rework rework110202
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
 * Fix: timer.c compile error io.h not found with arm/at91rm9200
 * update arm920t/at91 to ATMEL_xxx name scheme
 * update arm920t/at91 soc lib
 * update at91_emac driver

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Tested-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-21 22:26:21 +02:00
Valentin Longchamp
d3920144e1 mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
This allows this configuration to be defined differently for some
boards that request it.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>
2011-05-31 19:46:14 +02:00
Wolfgang Denk
cd6881b519 Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19 22:22:44 +02:00
Reinhard Meyer
329f0f52fa ATMEL: fix related common atmel driver files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18 07:56:51 +02:00
Michal Simek
95efa79d08 net: xilinx emaclite: Fix return values
Fix return values for initialize/init/recv/send functions

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-05-12 22:29:28 +02:00
Luca Ceresoli
03eb129f8a NET: pass source IP address to packet handlers
This is needed for the upcoming TFTP server implementation.

This also simplifies PingHandler() and fixes rxhand_f documentation.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-05-12 19:38:19 +02:00
Andy Fleming
063c12633d tsec: Convert tsec to use PHY Lib
This converts tsec to use the new PHY Lib.  All of the old PHY support
is ripped out.  The old MDIO driver is split off, and placed in
fsl_mdio.c.  The initialization is modified to initialize the MDIO
driver as well.  The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:34 -05:00
Andy Fleming
9082eeac5d phylib: Add a bunch of PHY drivers from tsec
The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.

While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible).  Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:34 -05:00
Andy Fleming
5f184715ec Create PHY Lib for U-Boot
Extends the mii_dev structure to participate in a full-blown MDIO and
PHY driver scheme.  The mii_dev structure and miiphy calls are modified
in such a way to allow the original mii command and miiphy
infrastructure to work as before, but also to support a new set of APIs
which allow (among other things) sharing of PHY driver code and 10G support

The mii command will continue to support normal PHY management functions
(Clause 22 of 802.3), but will not be changed to support 10G
(Clause 45).

The basic design is similar to PHY Lib from Linux, but simplified for
U-Boot's network and driver infrastructure.

We now have MDIO drivers and PHY drivers

An MDIO driver provides:
read
write
reset

A PHY driver provides:
(optionally): probe
config - initial setup, starting of auto-negotiation
startup - waiting for AN, and reading link state
shutdown - any cleanup needed

The ethernet drivers interact with the PHY Lib using these functions:
phy_connect()
phy_config()
phy_startup()
phy_shutdown()

Each PHY driver can be configured separately, or all at once using
config_phylib_all_drivers.h (added in the patch which adds the drivers)

We also provide generic drivers for Clause 22 (10/100/1000), and
Clause 45 (10G) PHYs.

We also implement phy_reset(), and call it in phy_connect(). Because
phy_reset() is essentially the same as miiphy_reset, but:
a) must support 10G PHYs, and
b) should use the phylib primitives,

we implement miiphy_reset, using phy_reset(), but only when
CONFIG_PHYLIB is set. Otherwise, we just use the old version. In this
way, we save on compile size, even if we don't manage to save code size.

Pulled ethtool.h and mdio.h from:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
782d640afd15af7a1faf01cfe566ca4ac511319d
With many, many deletions so as to enable compilation under u-boot

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 15:09:19 -05:00
Andy Fleming
09c04c2096 Remove instances of phy_read/write
There were a few files which were already using phy_read and phy_write
for their PHY function names.  It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.

Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c

Lastly, uec_phy.c was putting a space between the phy writing
function names, and the open paren, so I fixed that

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Mingkai Hu
907519108c tsec: arrange the code to avoid useless function declaration
This is merely a rearrangement.  No changes to the code, except
to remove now-useless declarations.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Mingkai Hu
a32a6be28f tsec: use IO accessors for IO accesses
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Loïc Minier
6052cbab40 Fix misc spelling errors found by lintian
Signed-off-by: Loc Minier <loic.minier@linaro.org>
2011-04-12 22:58:31 +02:00
Roy Zang
2c2668f971 Net: Add Intel E1000 82574L PCIe card support
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-11 22:20:13 +02:00
Ben Gardiner
7d2fade7b1 ea20: fix undefined PHY_* errors
This patch fixes ea20 after 8ef583a035 where
the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_
definitions except in the RMII support for davinci_emac. Probably also due to
the merge path of changes in 2010.12.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
CC: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:28:44 +02:00
Li Yang
19d68d2027 tsec: add AR8021 PHY support
Signed-off-by: Li Yang <leoli@freescale.com>
2011-04-04 09:24:43 -05:00
Po-Yu Chuang
8d8fd5b696 net: ftmac100: update get_timer() usages
Use get_timer() the same way as drivers/net/ftgmac100.c

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Reviewed-by: Macpaul Lin <macpaul@gmail.com>
Tested-by: Macpaul Lin <macpaul@gmail.com>
2011-03-21 22:54:23 +01:00
Po-Yu Chuang
6f6e6e09b2 net: ftmac100: remove unnecessary volatiles
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Reviewed-by: Macpaul Lin <macpaul@gmail.com>
Tested-by: Macpaul Lin <macpaul@gmail.com>
2011-03-21 22:53:30 +01:00
Yoshihiro Shimoda
903de461e4 net: sh_eth: add support for SH7757's ETHER
SH7757 has ETHER and GETHER. This patch supports EHTER only.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-03-16 10:16:34 +09:00
Nobuhiro Iwamatsu
327f55c6da net: ne2000: Add spport RTL-8019AS
Add infomation of RTL-8016AS to hw_info.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2011-02-15 21:55:41 +01:00
Wolfgang Denk
4bfa18fb99 Merge branch 'master' of git://git.denx.de/u-boot-sh 2011-02-04 20:38:27 +01:00
Yoshihiro Shimoda
68260aab93 net: sh_eth: add cache handling
Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Sandeep Paulraj
840f8923a0 DaVinci DM6467: Added ET1011C (LSI) PHY support
Added arch/arm/cpu/arm926ejs/davinci/et1011c.c for handling
ET1011C gigabit phy. which overrides get_link_speed function
from default implementation. This enables output of 125 MHz
reference clock on SYS_CLK pin.

Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-02-02 00:54:44 +01:00
Sandeep Paulraj
2a7d603f37 DaVinci EMAC: Add name to Ethernet device
Adds "DaVinci-EMAC" as the name of the device so that
it gets printed as "Using DaVinci-EMAC device"
during network access (dhcp, tftp) instead of empty name
in "Using" statement.This name also gets
reflected in 'ethact' env variable.


Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-02-02 00:54:44 +01:00
Sandeep Paulraj
4b9b9e7c66 DaVinci EMAC: Fix davinci_eth_gigabit_enable
Enabling the gigabit was overwriting the
previous configuration by setting up only GIGAFORCE and
GIG bits of MAC control register.
Modified to retain previous configuration while
gigabit enabling.

Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-02-02 00:54:44 +01:00
Liu Hui-R64343
96912453fe fec_mxc: add support for MX53 processor
This patch add FEC support for Freescale MX53 processor

Signed-off-by: Jason Liu <r64343@freescale.com>
2011-02-02 00:54:41 +01:00
Yanjun Yang
16721715b9 NET: lan91c96: Correct chip detect logic
The lan91c96_detect_chip routine is not correct according
to the manual.

Signed-off-by: YanJun Yang <yangyj.ee@gmail.com>
2011-01-18 23:58:35 +01:00
Yanjun Yang
0e7790d450 LAN91C*: Change chip names to fit the eth_device struct size
The eth_device.name field length is limited by NAMESIZE,
which is 16 defined in include/net.h. Unfortunately, two
of the names in lan91c96.c are beyond that.

Signed-off-by: YanJun Yang <yangyj.ee@gmail.com>
2011-01-10 22:38:36 +01:00
Macpaul Lin
b3dbf4a51f ftgmac100: support of gigabit eth ftgmac100
Add Faraday's ftgmac100 (gigabit ethernet)
MAC controller's driver.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-01-09 22:16:51 +01:00
Mike Frysinger
8ef583a035 miiphy: convert to linux/mii.h
The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-09 18:06:50 +01:00
Wolfgang Denk
006915fbb0 Merge branch 'master' of ../master into next 2010-12-16 23:00:53 +01:00
Kumar Gala
72c96a6802 tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII
The following commit:

commit 46e91674fb
Author: Peter Tyser <ptyser@xes-inc.com>
Date:   Tue Nov 3 17:52:07 2009 -0600

    tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode

Removed setting Auto-Neg by default, however this is believed to be
proper default configuration for initialization of the TBI interface.

Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
Auto-Neg to be disabled to function properly.

This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
with an SGMII riser card.  We also remove setting
CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
default setting is sufficient for them.

Additionally, we clean up the code a bit to remove an unnecessary second
define.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
2010-12-13 09:32:15 -06:00
Wolfgang Denk
ac8983bcba Merge branch 'master' of git://git.denx.de/u-boot-imx 2010-12-09 20:52:44 +01:00
Sudhakar Rajashekhara
d26074012b da850: Add RMII support for EMAC
This patch is a port of the work by Sudhakar Rajeshekhara in commit
ab3effbcad8851cc65dc5241a01c064d2030a3b2 of
git://arago-project.org/git/people/sandeep/u-boot-davinci.git.

The da850 UI board has on it an RMII PHY which can be used if the MDC line
to the MII PHY on the baseboard is disabled and the RMII PHY is enabled by
configuring the values of some GPIO pins on the IO expander of the UI board.
This patch implements disabling that line via GPIO2[6], configuring the UI
board's IO expander and setting only the pinmux settings that are needed for
RMII operation.

Tested on da850evm by adding a define for CONFIG_DRIVER_TI_EMAC_USE_RMII.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Sandeep Paulraj <s-paulraj@ti.com>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Mike Frysinger <vapier@gentoo.org>
CC: Sughosh Ganu <urwithsughosh@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-11-30 11:27:44 -05:00
Wolfgang Denk
de550d6b34 824x: Cleanup for partial linking and --gc-sections
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2010-11-27 23:35:12 +01:00
Wolfgang Denk
8aa858cbc0 e1000: fix compile warning
Get rid of compiler warning:
e1000.c: In function 'e1000_transmit':
e1000.c:5028: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2010-11-26 22:08:18 +01:00
Liu Hui-R64343
565e39c577 imx: Get fec mac address from fuse
The patch is to support getting FEC MAC address from fuse bank.

Signed-off-by: Jason Liu <r64343@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2010-11-21 18:24:20 +01:00
Daniel Hellstrom
6439466047 GRETH: removed space in network driver device name.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:25 +01:00
Daniel Hellstrom
ed52d121d3 GRETH: fixed 2 decriptor table typos
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:25 +01:00
Daniel Hellstrom
533b67d4bf GRETH: Added extra RESET, this is needed if GRETH was stopped during an ethernet frame reception.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:25 +01:00
Daniel Hellstrom
e780d82b96 GRETH: Added autodetection of PHY address, or let BSP hardcode it.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:25 +01:00
Daniel Hellstrom
6644c19573 GRETH: made debug printouts use common debug() macro.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:24 +01:00
Daniel Hellstrom
e3ce686c6e GRETH: removed unneccesary register write and one clean up.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-11-18 08:33:24 +01:00
Matthew McClintock
f7ac99fdd9 net: e1000: typo using wrong argument to sizeof
Typo from 4b29bdb0ed

Signed-off-by: Matthew McClintock <msm@freescale.com>
2010-11-17 22:05:11 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Kumar Gala
4b29bdb0ed net: e1000: Add initialized eth_device & e1000_hw structure
nic and hw structures are allocated via malloc i.e. return memory
is not zero initialized. Because of this few structure member like
"function pointers" are initialized with garbage values.

It may cause problem. for eg. during eth_initialize, dev->write_hwaddr
is used.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Fixed typo.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-11-14 23:24:37 +01:00
Nobuhiro Iwamatsu
fe7f1883b7 net: uli526x: Add initialized eth_device structure
uli526x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:46 +01:00
Nobuhiro Iwamatsu
7faeb9976a net: tsi108_eth: Add initialized eth_device structure
tsi108_eth driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:46 +01:00
Nobuhiro Iwamatsu
5ed0eeca38 net: pcnet: Add initialized eth_device structure
pcnet driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:45 +01:00
Nobuhiro Iwamatsu
9a07e8094c net: ns8382x: Add initialized eth_device structure
ns8382x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:44 +01:00
Nobuhiro Iwamatsu
a9bc6d7ccf net: natsemi: Add initialized eth_device structure
natsemi driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:43 +01:00
Nobuhiro Iwamatsu
de0b95762a net: fec_mxc: Add initialized eth_device structure
This prevents access to the member of eth_device which is not initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:42 +01:00
Nobuhiro Iwamatsu
72c4c33e98 net: eepro100: Add initialized eth_device structure
eepro100 driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:41 +01:00
Nobuhiro Iwamatsu
be44f75887 net: dc2114x: Add initialized eth_device structure
dc2114x driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:40 +01:00
Nobuhiro Iwamatsu
986f72789d net: rtl8139: Add initialized eth_device structure
rtl8139 driver does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:39 +01:00
Nobuhiro Iwamatsu
f4eaef7b2e net: rtl8169: Add initialized eth_device structure
rtl8169 does not have write_hwaddr function.
However, eth stuff executes write_hwaddr function
because eth_device structure has not been initialized.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-11-14 23:17:37 +01:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Kumar Gala
0ef911934f Fix compile warning in uli526x driver
uli526x.c: In function 'uli526x_init_one':
uli526x.c:314:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
uli526x.c:314:2: warning: dereferencing type-punned pointer will break strict-aliasing rules

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20 02:38:41 -05:00
John Rigby
e9319f111d drivers/net/fec_mxc.c: write mac address in init
Call fec_set_hwaddr in init routine to setup MAC address so when ethaddr is set
late via setenv the change will propagate to the hw.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-10-19 23:27:19 +02:00