Commit graph

75 commits

Author SHA1 Message Date
Stefan Roese
e9609dc38b mips: octeon: use mips_mach_early_init() to copy to L2 cache
This patch adds the code to copy itself from bootrom location to a
different location (TEXT_BASE) to the Octeon platform. Its used in
this case to copy the complete U-Boot image into L2 cache, which
greatly improves the bootup time - especially in regard to the
very long and complex DDR4 init code.

The Kconfig symbol CONFIG_MIPS_MACH_EARLY_INIT is enabled with this
patch for Octeon.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Aaron Williams
0dc4ab9c43 mips: octeon: Initial minimal support for the Marvell Octeon SoC
This patch adds very basic support for the Octeon III SoCs. Only
CFI parallel NOR flash and UART is supported for now.

Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches
later. To still use U-Boot on with this port, the L2 cache (4MiB on
Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the
prompt on such boards.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Stefan Roese
de34a61642 mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code
This patch adds the optional call to mips_mach_early_init() to start.S
at a very early stage. Its disabled per default. It can be used for
very early machine / platform specific init code.  Its called very
early and at this stage the PC is allowed to differ from the linking
address (CONFIG_TEXT_BASE) as no absolute jump has been performed until
this call.

It will be used by thje Octeon platform.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
57bfb1aed6 mips: add config options for generic cache setup code
Add an own Kconfig symbol for the initial disabling of caches
invoked from generic start code.

Also add an own Kconfig symbols for the initialization of caches
invoked from generic start code.

Until now both code paths could only be disabled with
CONFIG_SKIP_LOWLEVEL_INIT. But this is not flexible enough for
RAM boot scenarios like EJTAG or SPL payload or for machines
which don't require cache initialization or which want to
provide their own cache implementation.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Weijie Gao
7a4b6964b5 mips: mtmips: add SPL support
This patch adds SPL support for mtmips platform. The lowlevel architecture
is split into SPL and the rest parts are built into a memory loadable
u-boot image. Optional SPL_DM and OF_CONTROL are also supported.

The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are
not enabled and the memory bootable u-boot (u-boot.img) is generated
automatically so there is not need to add a separate config for it.

A lzma compressed payload (u-boot-lzma.img) is also generated and it will
be combined with u-boot-spl.bin to form the unified ROM bootable binary
u-boot-mtmips.bin.

A spl loader is added to support uncompress the payload.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:12 +02:00
Weijie Gao
c95c3ec025 mips: add a option to support not reserving malloc space on initial stack
The initial stack on some platforms is too small to hold a large malloc
space. This patch adds a option to allow these platforms not reserving the
malloc space on initial stack. These platforms should set the malloc base
after DRAM is usable.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
2434f58c78 mips: add an option to support initialize SRAM for initial stack
Currently CONFIG_MIPS_INIT_STACK_IN_SRAM assumes the memory space for the
initial stack can be used directly. However on some platform the SRAM needs
initialization, e.g. lock cache.

This patch adds an option to allow a new function mips_sram_init() being
called before setup_stack_gd.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
814a8916a9 mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds
u_boot_list is not only used by DM, but also by some SPL image load methods
such as spl_nor.c.

This patch adds an option CONFIG_SPL_LOADER_SUPPORT in conjunction with
CONFIG_SPL_DM surrounding the u_boot_list section to make sure SPL image
loaders can be correctly built into u-boot SPL without DM enabled.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
71059736b8 mips: add support to restore exception vector base before booting linux
In U-Boot the exception vector base will be moved to top of memory, to be
used to display register dump when exception occurs.

But some old linux kernel does not honor the base set in CP0_EBASE. A
modified exception vector base will cause kernel crash.

This patch adds an option to enable reset exception vector base to its
previous value, or a user configured value before booting linux kernel.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Daniel Schwierzeck
2a250ae9b6 MIPS: remove Micronas VCT boards
The deadline for migration to CONFIG_DM is v2020.01. The VCT
baords would need an almost complete rewrite of all drivers to
support driver model.

Unless someone has access to the hardware and volunteers to do the migration,
the board should be scheduled for removal.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
2019-11-29 16:18:35 +01:00
Weijie Gao
3f851c992d mips: mtmips: select essential drivers in Kconfig
Some drivers (clk, pinctrl, reset, ...) are necessary for reset of the
system, they should be always selected.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Ramon Fried
22247c63ac MIPS: add compile time definition of L2 cache size
If configuration is set to skip low level init, automatic
probe of L2 cache size is not performed and the size is set to 0.
Flushing or invalidating the L2 cache will fail in this case.

Add a static configuration (SYS_DCACHE_LINE_SIZE) with default set to 0.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
2019-10-25 17:20:43 +02:00
Stefan Roese
9814fb272f mips: mt76xx: Implement new d-cache fix in last_stage_init()
With commit 06985289d4 ("watchdog: Implement generic watchdog_reset()
version") the init sequence has changed in arch_misc_init(), resulting
in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena).
When this happens, the first (or sometimes later ones as well) TFTP
command hangs and does not complete correctly. This leads to the
assumption that the d-cache is not in a clean state once the ethernet
driver is called (d-cache is used here for the buffers). The old work-
around with the cache flush somehow does not work any more now with
the new code change.

Unfortunately adding CONFIG_SYS_MALLOC_CLEAR_ON_INIT also did not fix
this issue. With v2019.07-rc3 it shows again. The time of accessing
the data seems to be very important here. It needs to be "very late"
in the boot process.

Testing has shown, that copying a 64KiB area in DDR at a very late
bootup time, directly before calling into the prompt, fixes this issue.
Flushing of the complete d-cache does not seem to necessary, as this
copy alone seems to fix this problem.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-07-05 17:12:27 +02:00
Stefan Roese
f913eab9b9 mips: mt76xx: Remove cache workaround and select SYS_MALLOC_CLEAR_ON_INIT
With commit 06985289d4 ("watchdog: Implement generic watchdog_reset()
version") the init sequence has changed in arch_misc_init(), resulting
in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena).
When this happens, the first (or sometimes later ones as well) TFTP
command hangs and does not complete correctly. This leads to the
assumption that the d-cache is not in a clean state once the ethernet
driver is called (d-cache is used here for the buffers). The old work-
around with the cache flush somehow does not work any more now with
the new code change.

To fix this issue, this patch now removes the old workaround and selects
CONFIG_SYS_MALLOC_CLEAR_ON_INIT for ARCH_MTMIPS. With this option the
complete malloc area is initialized with zeros (cache lines are touched).
Testing has shown that this also fixes the issue on the MT7688 boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-05-24 15:55:17 +02:00
Weijie Gao
16b94903e2 mips: rename mach-mt7620 to mach-mtmips
Currently mach-mt7620 contains only support for mt7628. To avoid confusion,
rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms.
MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628
because they do not share the same lowlevel codes.

Dependencies of four drivers are changed to SOC_MT7628 as these drivers
are only used by MT7628.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-05-03 16:43:11 +02:00
Paul Burton
cd71b1d5d2 mips: jz47xx: Add JZ4780 SoC support
Add initial support for the Ingenic JZ47xx MIPS SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
dd1033e4e0 MSCC: add support for Ocelot SoCs
This family of SoCs are found in the Microsemi Switches solution and have
already a support in the linux kernel.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Stefan Roese
a5f50e0114 mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issues
It has been noticed, that sometimes the d-cache is not in a
"clean-state" when U-Boot is running on MT7688. This was detected when
using the ethernet driver (which uses d-cache) and a TFTP command does
not complete. Flushing the complete d-cache (again?) here seems to fix
this issue.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19 15:23:01 +01:00
Stefan Roese
4ff942b059 mips: mt76xx: Enable watchdog support
This patch enables and starts the watchdog on the MT7620 platform.
Currently the WD timeout is configured to 60 seconds.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
[fixed build error due to missing function prototype arch_misc_init]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18 16:02:22 +01:00
Stefan Roese
b4a6a1bb3f mips: mt76xx: Kconfig: Add ethernet and GPIO support
Imply DM_ETH and DM_GPIO for ARCH_MT7620, as this platform now supports
ethernet and GPIO as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18 16:02:22 +01:00
Daniel Schwierzeck
9630146411 MIPS: make size of relocation table fixed but configurable
Currently the size of the relocation table will be shrunk
to the actual size needed. Although this gives a maximal
space saving, it messes up the _end symbol. This breaks
features like appended DTBs because the _end symbol doesn't
point to the real end of the U-Boot binary.

Remove the size shrinking and make the size of the relocation
table fixed but configurable. This follows the Linux approach
and the user can adjust the size to his needs.

Also rename the relocation table section from .rel to .data.reloc
to follow the Linux approach and to avoid ambiguities with the
.rel.* sections added by the linker.

Reported-by: Lars Povlsen <lars.povlsen@microsemi.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-02 22:39:07 +01:00
Stefan Roese
41f6e6eb64 mips: mt76xx: Add sysreset support
This patch adds the necessary sysreset DT node and enables the required
drivers via Kconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-23 14:27:51 +02:00
Stefan Roese
4c835a607b mips: Add basic MediaTek MT7620/88 support
This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of
the code is copied from the MediaTek GitHub repository:

https://github.com/MediaTek-Labs/linkit-smart-uboot.git

The mt7628a.dtsi file is imported from Linux v4.17.

Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway
both based on the MT7688 will be added in further patches.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 21:18:33 +02:00
Daniel Schwierzeck
5ef337a037 MIPS: cache: make index base address configurable
The index base address used for the cache initialisation is currently
hard-coded to CKSEG0. Make this value configurable if a MIPS system
needs to have a different address (e.g. in SRAM or ScratchPad RAM).

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 21:02:03 +02:00
Daniel Schwierzeck
d1c3d8bdfa MIPS: start.S: make boot config at offset 0x10 configurable
Some MIPS systems store some board-specific boot configuration
in the U-Boot binary at offset 0x10. This is used by Malta boards
and by Lantiq/Intel SoC's when booting from parallel NOR flash.

Convert the hard-coded values to Kconfig options to remove such
board-specific stuff out of the generic start.S code. This also
deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 20:59:22 +02:00
Tom Rini
481ea2e39d mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform.  As pb1x00 had no listed
maintainer I am assuming that it is also orphaned.  Remove this platform
and then remove the unused SoC support.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:34:27 +02:00
Tom Rini
215b4fae51 mips: dbau1x00: Remove this board
This platform has been marked as orphan since June of 2016 and should
have been removed some time ago.  Do so now.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:33:51 +02:00
Michal Simek
08a00cba06 dm: Change CMD_DM enabling
CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kconfig. Unfortunately this is in the tree for quite a long time
that's why solution is to use imply DM for all targets which are
enabling DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Michal Simek
5ed063d10f Kconfig: Sort bool, default, select and imply options
Fix Kconfig bool, default, select and imply options to be
alphabetically sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-30 07:18:48 -04:00
Simon Glass
c1c3fe2307 env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:01 -04:00
Simon Glass
85fc970d74 Convert CONFIG_ENV_IS_IN_FLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_FLASH

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-25 21:20:02 -04:00
Simon Glass
2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00
Paul Burton
d2b12a5767 boston: Setup memory ranges in FDT provided to Linux
The boston memory map isn't suited to the simple "all memory starting
from 0" approach that the MIPS arch_fixup_fdt() implementation takes.
Instead we need to indicate the first 256MiB of DDR from 0 and the rest
from 0x90000000. Implement ft_board_setup to do that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Paul Burton
ed048e7c76 boston: Move CM GCRs away from flash
Move the MIPS Coherence Manager (CM) Global Configuration Registers
(GCRs) away from the region of the physical address space which the
Boston board's parallel flash is found in, such that we can access all
of flash without clobbering GCRs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Paul Burton
939a255a67 MIPS: Make CM GCR base configurable
Without adding a prompt for CONFIG_MIPS_CM_BASE, Kconfig doesn't allow
defconfigs to set it. Provide the prompt in order to allow for that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Álvaro Fernández Rojas
ee422142f4 MIPS: add initial infrastructure for Broadcom MIPS SoCs
CFE checks CPU Thread in a different way (using register $22):
mfc0	t1, C0_BCM_CONFIG, 3 # $22
li	t2, CP0_CMT_TPID # (1 << 31)
and	t1, t2
bnez	t1, 2f	# if we are running on thread 1, skip init
nop

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Daniel Schwierzeck
924ad86638 MIPS: add possibility to setup initial stack and global data in SRAM
This adds a new Kconfig option CONFIG_MIPS_INIT_STACK_IN_SRAM which
a SoC can select if it supports some kind of SRAM. Together with
CONFIG_SYS_INIT_SP_ADDR the initial stack and global data can be
set up in that SRAM. This can be used to provide a C environment
also for lowlevel_init().

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
af3971f81a MIPS: make inclusion of ROM exception vectors configurable
This adds a compile time option to include code for static
exception vectors. Static exception vectors are only needed,
when the U-Boot entry point is equal to the CPU reset exception
vector address. For instance this is the case when U-Boot is
used as ROM in Qemu or booted from parallel NOR flash. When
U-Boot is booted from RAM (e.g. loaded there by SPL), the
exception vectors need to be setup dynamically, which is done
in follow-up commits.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:07:17 +01:00
Paul Burton
ad8783cb1c boston: Introduce support for the MIPS Boston development board
This patch introduces support for building U-Boot to run on the MIPS
Boston development board. This is a board built around an FPGA & an
Intel EG20T Platform Controller Hub, used largely as part of the
development of new CPUs and their software support. It is essentially
the successor to the older MIPS Malta board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 16:24:36 +02:00
Paul Burton
566ce04de4 MIPS: Malta: Enable CM & L2 support
Enable support for the MIPS Coherence Manager & L2 caches on the MIPS
Malta board, removing the need for us to attempt to bypass the L2 during
boot (which would fail with recent CPUs that expose L2 config via the CM
anyway).

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Paul Burton
4baa0ab67d MIPS: L2 cache support
This patch adds support for initialising & maintaining L2 caches on MIPS
systems. The L2 cache configuration may be advertised through either
coprocessor 0 or the MIPS Coherence Manager depending upon the system,
and support for both is included.

If the L2 can be bypassed then we bypass it early in boot & initialise
the L1 caches first, such that we can start making use of the L1
instruction cache as early as possible. Otherwise we initialise the L2
first such that the L1s have no opportunity to generate access to the
uninitialised L2.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Paul Burton
b2b135d980 MIPS: Map CM Global Control Registers
Map the Global Control Registers (GCRs) provided by the MIPS Coherence
Manager (CM) in preparation for using some of them in later patches.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Zubair Lutfullah Kakakhel
ebf2b9e3df mips: Add MIPSfpga platform support
MIPSfpga is an FPGA based dev platform.

In a nutshell, its a microAptiv cpu core with lots of Xilinx IP blocks

The FPGA dev board used is the Nexys4DDR board by Digilent.

For more information, check the Readme file in board/imgtec/xilfpga

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-09-21 14:55:14 +02:00
Paul Burton
4b7b0a0f06 MIPS: Make CONFIG_SYS_DCACHE_LINE_SIZE int, not hex
For consistency with the other cache-related Kconfig entries & the
values actually set by boards, make CONFIG_SYS_DCACHE_LINE_SIZE an int
entry instead of a hex entry.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 372286217f ("MIPS: Split I & D cache line size config")
2016-06-10 12:27:37 +02:00
Paul Burton
372286217f MIPS: Split I & D cache line size config
Allow L1 Icache & L1 Dcache line size to be specified separately, since
there's no architectural mandate that they be the same. The
[id]cache_line_size functions are tidied up to take advantage of the
fact that the Kconfig entries are always present to simply check them
for zero rather than needing to #ifdef on their presence.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[removed CONFIG_SYS_CACHELINE_SIZE in include/configs/pic32mzdask.h]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-31 09:44:24 +02:00
Paul Burton
ace3be4f15 MIPS: Move cache sizes to Kconfig
Move details of the L1 cache line sizes & total sizes into Kconfig,
defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is
introduced to allow platforms to select auto-detection of cache sizes,
and it defaults to being enabled if none of the cache sizes are set by
the configuration (ie. sizes are all the default 0), and code is
adjusted to #ifdef on that rather than on the definition of the sizes
(which will always be defined even if 0).

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31 09:44:24 +02:00
Daniel Schwierzeck
5f9cc363ed MIPS: add tune for MIPS 34kc
Add tune Kconfig option for MIPS 34kc.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-31 09:38:11 +02:00
Paul Burton
0f832b9cdc malta: Allow MIPS64 builds
Both real Malta boards & emulators that mimic Malta (eg. QEMU) can
support MIPS64 CPUs. Allow MIPS64 builds of U-Boot for such boards,
which enables the user to make use of the whole 64 bit address space.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31 09:38:11 +02:00
Paul Burton
6242aa1374 malta: Use device model & tree for UART
Make use of device model & device tree to probe the UART driver. This is
the initial step in bringing Malta up to date with driver model, and
allows for cleaner handling of the different I/O addresses for different
system controllers by specifying the ISA bus address instead of a
translated memory address.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-26 01:34:13 +02:00
Paul Burton
40ba13c986 malta: Support MIPS32r6 configurations
Both real Malta boards & QEMU's Malta emulation can feature MIPS32r6
CPUs. Allow building U-Boot for such systems by selecting
CONFIG_SUPPORTS_CPU_MIPS32_R6 for Malta.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-21 01:36:39 +02:00