Commit graph

19 commits

Author SHA1 Message Date
Simon Glass
c0f87dd4ff sf: Use spi_flash_alloc() in each SPI flash driver
Rather than each device having its own way to allocate a SPI flash
structure, use the new allocation function everywhere. This will make it
easier to extend the interface without breaking devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:36 -07:00
Mike Frysinger
41e1713425 sf: unify status register writing (and thus block unlocking)
The only two drivers to write the status register do it in the same
way, so unify the implementations.  This also makes the block unlock
logic the same.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:18:17 -05:00
Mike Frysinger
7a6d2a7ec1 sf: sst: inline duplicate write enable helper funcs
The local sst enable/disable write funcs don't really add anything
over the common API, so just inline the common calls directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:12:23 -05:00
Mike Frysinger
c4e932ce73 sf: unify erase commands
Analysis of the flash drivers shows that they all use 0x20 if the erase
size is 4KiB, or 0xd8 if it's larger.  So with this info in hand, we can
unify all the erase functionality in one place.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 22:35:50 -05:00
Mike Frysinger
b4c87d658c sf: drop unused/duplicate command defines
In an effort to unify the spi flash drivers further, drop all the
unused and/or duplicate command defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-20 00:41:36 -04:00
Mike Frysinger
8875bdb341 sf: sst: support newer standardized flashes
Newer SST flashes have dropped the Auto Address Increment (AAI) word
programming (WP) modes in favor of the standard page programming mode
that most flashes now support.  So add a flags field to the different
flashes to support both modes with new and old styles.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:32:59 +02:00
Mike Frysinger
66ecb7cdb0 sf: unify write disable commands
Every spi flash uses the same write disable command, so unify this in
the common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fixed commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-07-26 16:32:15 +02:00
Mike Frysinger
2744a4e688 sf: unify write enable commands
Every spi flash uses the same write enable command, so unify this in
the common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:28:21 +02:00
James Kosin
1c091f59a0 sf: sst: add support for SST25VF064C
Signed-off-by: James Kosin <jkosin@intcomgrp.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 15:39:08 -04:00
Mike Frysinger
f8f0757dcb sf: localize erase funcs
No need for these to be exported as they are only accessed indirectly
via function pointers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:56 -04:00
Mike Frysinger
c5910874ba sf: sst: setup read func
The previous unification patch missed setting up the sst read func.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:54 -04:00
Richard Retanubun
4e6a515899 sf: add struct spi_flash.sector_size parameter
This patch adds a new member to struct spi_flash (u16 sector_size)
and updates the spi flash drivers to start populating it.

This parameter can be used by spi flash commands that need to round
up units of operation to the flash's sector_size.

Having this number in one place also allows duplicated code to be
further collapsed into one common location (such as erase parameter
and the detected message).

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:37 -04:00
Mike Frysinger
a4c3b40b33 sf: unify read functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:55 +02:00
Mike Frysinger
e7b44eddbe sf: unify erase functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:54 +02:00
Mike Frysinger
6163045bcd sf: unify status polling for ready bit
All of the spi flash drivers implement the status register polling for
detecting the device ready state, so unify them all in a new helper
function -- spi_flash_wait_ready.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:53 +02:00
Mike Frysinger
b376bbb49f sf: move useful messages from debug to printf
At the moment, the default SPI flash subsystem is quite terse.  Errors and
successes both result in a generic message.  So move the useful errors and
useful successes to printf output by default.

While we're here, also convert the messages to use print_size().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Mike Frysinger
dd54126715 sf: sst: add sst25vf###b ids
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-06 18:46:20 -04:00
Mike Frysinger
7d907f0ea9 sf: sst: fix sector size
Looks like when I was encoding the sector sizes, I forgot to divide by 8
(due to the stupid marketing driven process that declares all sizes in
useless megabits and not megabytes).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-06 18:46:20 -04:00
Mike Frysinger
1c5874374e sf: add driver for SST flashes
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:49:58 -04:00