Commit graph

9 commits

Author SHA1 Message Date
Simon Glass
bd768264fb dm: exynos: dts: Set the offset length for cros_ec
The EC has no concept of offset, so use a value of 0.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:01 -07:00
Simon Glass
6f755eb66b dm: exynos: dts: Use GPIO bank phandles for GPIOs
U-Boot now supports using GPIOs using bank phandles instead of global
numbers. Update the exynos device tree files to use this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2015-01-29 17:09:53 -07:00
Sjoerd Simons
9332274989 cros-ec-keyboard: Synchronize DT binding from linux
The ChromeOS EC keyboard is used by various different chromebooks. Peach
pi being the third board in the u-boot tree to use it (snow and peach
pit the other two). Rather then embedding the same big DT node in the
peach-pi DT again, copy the dtsi snippit & bindings documentation from
linux and include it in all 3 boards.

This slightly changes the dt bindings in u-boot:
  * google,key-rows becomes keypad,num-rows
  * google,key-colums becomes keypad,num-colums
  * google,repeat-delay-ms and google,repeat-rate-ms are no longer used
    and replaced by hardcoded values (similar to tegra kbc)

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-01-05 17:45:16 -07:00
Sjoerd Simons
c2056157f8 exynos: dts: Correct USB vbus-gpio numbering for Snow
The current vbus GPIOs on snow make very little sense, their number is
far above the maximum. As a result, USB doesn't work on snow.

Correct the GPIO numbering so they match the current scheme for exynos5.
Tested both EHCI and XHCI to correctly work after this change.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:12:30 +09:00
Simon Glass
73186c9460 dm: exynos: Convert SPI to driver model
Move the exynos SPI driver over to driver model. This removes quite a bit
of boilerplate from the driver, although it adds some for driver model.

A few device tree additions are needed to make the SPI flash available.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:49 -06:00
Simon Glass
2fdd7d9e1a dm: exynos: dts: Convert /include/ to #include
We should be consistent about this. The kernel has moved to #include
which breaks error reporting to some extent but does allow us to include
binding files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:34:00 -06:00
Simon Glass
14ccc30b34 exynos: dts: Enable LCD for snow
Enable LCD for snow. This is a 1366 x 768 panel.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-28 10:58:19 +09:00
Simon Glass
63e62674fb exynos: dts: Correct EC interrupt GPIO
Now that the GPIO numbering series has been applied, we can use the correct
GPIO for the EC interrupt.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-28 10:58:18 +09:00
Masahiro Yamada
5ab502cb89 dts: move device tree sources to arch/$(ARCH)/dts/
Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.

I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.

For example, before this commit, board/xilinx/dts directory
had both Microblaze dts (microblaze-generic.dts) and
ARM dts (zynq-*.dts), which are totally unrelated.

This commit moves *.dts to arch/$(ARCH)/dts/ directories,
allowing us to describe nicely mutiple DTBs generation in the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:05 -05:00
Renamed from board/samsung/dts/exynos5250-snow.dts (Browse further)