Commit graph

54 commits

Author SHA1 Message Date
Adam Ford
3f70bef1b8 Convert CONFIG_FSL_USDHC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_USDHC

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-23 16:42:38 -04:00
Yangbo Lu
e37ac717d7 Convert to use fsl_esdhc_imx for i.MX platforms
Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:18:34 +08:00
Alex Kiernan
623de3f086 Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
This converts the following to Kconfig:
   CONFIG_SUPPORT_EMMC_BOOT

As requested by Michal Simek <michal.simek@xilinx.com>, these boards
have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

  xilinx_zynqmp_zc1275_revB
  xilinx_zynqmp_zc1751_xm018_dc4
  xilinx_zynqmp_zc1751_xm019_dc5
  xilinx_zynqmp_zcu100_revC
  xilinx_zynqmp_zcu102_rev1_0
  xilinx_zynqmp_zcu102_revA
  xilinx_zynqmp_zcu102_revB
  xilinx_zynqmp_zcu104_revA
  xilinx_zynqmp_zcu104_revC
  xilinx_zynqmp_zcu106_revA
  xilinx_zynqmp_zcu111_revA

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-04 13:04:12 -04:00
Tom Rini
b4ee6daad7 Porting to DM and i.MX8
------------------------
 
 - warp7 to DM
 - kp_imx53 to DM
 - Warnings in DT
 - MX8QM support
 - colibri-imx6ull to DM
 - imx7d-pico to DM
 - ocotp for MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlzDBtoPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3UpQL/ipaUejQOOr00oOgUBQqt3JCPZ7KNu8ruih/
 nIFUDrI8nP+4psaOhRp1sEPFJUxUjdIqODeAZD8zrlEi1pXNAgPWYrFRfbz54bzw
 jLsqqMz1/djQseLydQTcqZTSz8Ys7o+8OfKH64fdsZn+y9no9tHBN5hz5qWdXexN
 kbyykkg8TJC3eUyRZqKuULOqzDV9BAdASOXu7UTa04sEekLdVvS2+zkUdB6UVZTN
 LOAzm+7xY8Tey1BZxLuZUJDpHzFEMvPvlbbQRrxeDn/feZJwNgIP6hGcMeVOwOIf
 KEwFn/m/HI2JWS4taXb5aT+v3xmiQvyCC3jNW0XTf5rq02pbfgyPsVhGQIGyU2yY
 Fj7zIN7hVCLJNBpctvXyuAd1MjOlGEPIrHNjRnIZjtr7/iA1AIRn7Hg4cGNCHw6V
 5gdza3B/xFODN+Ts6O+UVIukI61MJ6mGGdNCueOnWDviNROOL82D7Jh02KfNNNxR
 q+yPsHSpo6rC1MGXv4SOReZtgpng/w==
 =CzWQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx

Porting to DM and i.MX8
------------------------

- warp7 to DM
- kp_imx53 to DM
- Warnings in DT
- MX8QM support
- colibri-imx6ull to DM
- imx7d-pico to DM
- ocotp for MX8
2019-05-01 07:25:51 -04:00
Tom Rini
d168bcb6fe configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 21:41:40 -04:00
Pierre-Jean Texier
6b503f9e65 warp7: Switch to DM USB
This commit switches to DM USB for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:21:00 +02:00
Pierre-Jean Texier
0710726d04 warp7: Switch to DM Serial
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:20:32 +02:00
Tom Rini
7ae2729401 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-07 14:53:03 -05:00
Bryan O'Donoghue
8ba377321c arm: imx7s-warp: Convert to DM PMIC
This patch converts the warp7 and warp7_bl33 board ports over to using the
DM PMIC model.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
ce36f56aca warp7: defconfig: Switch to DM for I2C
This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
4b319237ad warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
Switches on the IMX7 pinctrl driver for the warp7 and warp7_bl33 ports,
necessary to convert over to DM for this board.

It is necessary to switch on pinctrl and GPIO in one go.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
764d94736c arm: imx7s-warp: Convert to DM MMC initialization
Converts from fixed initialization of MMC to DM initialization of MMC.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Bryan O'Donoghue
a627f43868 arm: imx7s-warp: Add DT file hooks
This patch adds DT file hooks for imx7s-warp.dtb to the warp7 and
warp7_bl33 builds.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-28 20:55:46 +01:00
Philipp Tomsich
2acc24fc28 Kconfig: Migrate BOUNCE_BUFFER
The bounce buffer is used by a few drivers (most of the MMC drivers)
to overcome limitations in their respective DMA implementation.

This moves the configuration to Kconfig and makes it user-selectable
(even though it will be a required feature to make those drivers
work): the expected usage is for drivers depending on this to 'select'
it unconditionally from their respective Kconfig (see follow-up
patches).

This commit includes a full migration using moveconfig.py to ensure
that each commit compiles.  To ensure bisectability we update
dependencies of various drivers to now select BOUNCE_BUFFER when needed.

[trini: Squash all patches to ensure bisectability]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br> [dw_mmc portion]
Reviewed-by: Fabio Estevam <festevam@gmail.com> [mxsmmc portion]
Reviewed-by: Simon Glass <sjg@chromium.org> [tegra portion]
2019-01-19 09:49:26 -05:00
Pierre-Jean Texier
7f4269b24a warp7: configs: add CONFIG_FIT option
This enable FIT image support.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2018-12-17 10:46:04 +01:00
Tom Rini
4114a2614b configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-13 19:44:53 -05:00
Rui Miguel Silva
c7b3a7ee53 optee: adjust dependencies and default values for dram
We may have, the not yet considered, scenario where OPTEE is loaded before
u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted
Firmware (ATF), where in the 32bit flow is:
BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33)

In this case we need still to reserve the memory used by optee, to avoid
for example to realocate ourself to the same address at the end of DRAM.
So, we change here the dependencies on the OPTEE lib and we set the default
size and base of TZRAM to zero.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: u-boot@lists.denx.de
2018-10-22 14:37:28 +02:00
Tom Rini
86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00
Tom Rini
e966471562 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-07 21:40:14 -04:00
Tom Rini
358b6a20e4 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 11:57:37 -04:00
Bryan O'Donoghue
e426e19353 warp7: defconfig: Fix CAAM on boot with tip-of-tree
Booting the following image with tip-of-tree we get a CAAM DECO error (and
subsequent crash due to a kernel bug in 4.1).

http://freescale.github.io/#download -> BoardsWaRPboard community - WaRP -
Wearable Reference PlatformFSL Community BSP 2.3fsl-image-multimediawayland

Image: fsl-image-multimedia-imx7s-warp-20180323-90.rootfs.sdcard

Error:
caam 30900000.caam: Entropy delay = 3200
caam 30900000.caam: failed to acquire DECO 0
<snip>
caam 30900000.caam: failed to acquire DECO 0
caam 30900000.caam: Entropy delay = 12400
caam 30900000.caam: failed to acquire DECO 0
caam 30900000.caam: failed to instantiate RNG
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at
/home/jenkins/workspace/fsl-community-bsp-pyro_xwayland_2/build/tmp/work-shared/imx7s-warp/kernel-source/mm/vmalloc.c:1465
caam_remove+0x6)
Trying to vfree() nonexistent vm area (88047000)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.1.36-4.1-1.0.x-imx-warp7+ga543d1b #1
Hardware name: Freescale i.MX7 Dual (Device Tree)
[<80015d54>] (unwind_backtrace) from [<80012688>] (show_stack+0x10/0x14)
[<80012688>] (show_stack) from [<8076e810>] (dump_stack+0x78/0x8c)
[<8076e810>] (dump_stack) from [<800346a0>]
(warn_slowpath_common+0x80/0xb0)
[<800346a0>] (warn_slowpath_common) from [<80034700>]
(warn_slowpath_fmt+0x30/0x40)
[<80034700>] (warn_slowpath_fmt) from [<8054c278>] (caam_remove+0x6c/0x3f4)
[<8054c278>] (caam_remove) from [<8054ce74>] (caam_probe+0x874/0xfa8)
[<8054ce74>] (caam_probe) from [<80382a7c>] (platform_drv_probe+0x48/0xa4)
[<80382a7c>] (platform_drv_probe) from [<80381328>]
(driver_probe_device+0x174/0x2a8)
[<80381328>] (driver_probe_device) from [<8038152c>]
(__driver_attach+0x8c/0x90)
[<8038152c>] (__driver_attach) from [<8037f9d4>]
(bus_for_each_dev+0x68/0x9c)
[<8037f9d4>] (bus_for_each_dev) from [<80380a68>]
(bus_add_driver+0xf4/0x1e8)
[<80380a68>] (bus_add_driver) from [<80381b38>] (driver_register+0x78/0xf4)
[<80381b38>] (driver_register) from [<80009738>]
(do_one_initcall+0x8c/0x1d0)
[<80009738>] (do_one_initcall) from [<80a66dac>]
(kernel_init_freeable+0x140/0x1d0)
[<80a66dac>] (kernel_init_freeable) from [<8076aa38>]
(kernel_init+0x8/0xe8)
[<8076aa38>] (kernel_init) from [<8000f468>] (ret_from_fork+0x14/0x2c)
---[ end trace d5f941204ed8cb28 ]---
caam: probe of 30900000.caam failed with error -11
Unable to handle kernel NULL pointer dereference at virtual address
00000004
pgd = 80004000
[00000004] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
<snip>
[<8055cdf8>] (caam_sm_startup) from [<80aa83c8>] (caam_sm_init+0x50/0x58)
[<80aa83c8>] (caam_sm_init) from [<80009738>] (do_one_initcall+0x8c/0x1d0)
[<80009738>] (do_one_initcall) from [<80a66dac>]
(kernel_init_freeable+0x140/0x1d0)
[<80a66dac>] (kernel_init_freeable) from [<8076aa38>]
(kernel_init+0x8/0xe8)
[<8076aa38>] (kernel_init) from [<8000f468>] (ret_from_fork+0x14/0x2c)
Code: e59d300c e2832010 e5843008 e5834068 (e58a2004)
---[ end trace d5f941204ed8cb29 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fix: Enable the CAAM correctly by setting CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
in the upstream defconfig.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
2018-04-26 09:32:25 +02:00
Bryan O'Donoghue
baea5ecd26 warp7: defconfig: Enable CMD_SETEXPR
setexpr allows us to do arithmetic for env variables - something that is
both useful and required when doing HAB authentication without hard-coding
HAB load addresses.

This patch enables CMD_SETEXPR for the WaRP7 defconfig.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26 08:54:02 +02:00
Bryan O'Donoghue
42fcabdb26 warp7: defconfig: Enable CONFIG_BOOTM_TEE
This patch enables CONFIG_BOOTM_TEE. Once enabled its possible to
chain-load Linux through OPTEE.

Loading kernel to 0x80800000
=> run loadimage

Load FDT to 0x83000000
=> run loadfdt

Load OPTEE to 0x84000000
=> fatload mmc 0:5 0x84000000 /lib/firmware/uTee.optee

Then chain-load to the kernel via OPTEE

=> bootm 0x84000000 - 0x83000000

   Image Name:
   Image Type:   ARM Trusted Execution Environment Kernel Image (uncompressed)
   Data Size:    249844 Bytes = 244 KiB
   Load Address: 9dffffe4
   Entry Point:  9e000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26 08:53:22 +02:00
Bryan O'Donoghue
9fb2c1faa1 warp7: defconfig: Enable CONFIG_SECURE_BOOT
Various function associated with booting the WaRP7 in High Assurance Boot
(HAB) mode are enabled by switching on CONFIG_SECURE_BOOT.

This patch enables CONFIG_SECURE_BOOT for the WaRP7 defconfig.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26 08:53:22 +02:00
Bryan O'Donoghue
4bcbfcf458 warp7: Specify CONFIG_OPTEE_LOAD_ADDR
In order to sign images with the IMX code-signing-tool (CST) we need to
know the load address of a given image. The best way to derive this load
address is to make it into a define - so that u-boot.cfg contains the
address - which we can then parse when generating the IMX CST headers.

This patch makes the OPTEE_LOAD_ADDR available via u-boot.cfg for further
parsing by external tools.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26 08:52:51 +02:00
Bryan O'Donoghue
c727bba74a warp7: defconfig: Enable OPTEE for WaRP7
Requires setting CONFIG_OPTEE=y and setting an OPTEE TrustZone DRAM base in
include/configs/warp7.h.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-26 08:52:51 +02:00
Pierre-Jean TEXIER
0803bcf8a9 warp7: configs: enable CONFIG_CMD_FS_GENERIC
This enable generic file system commands (load, ls).

Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-04-26 08:51:36 +02:00
Mario Six
07dea2e737 treewide: Migrate CONFIG_FSL_ESDHC to Kconfig
Migrate the CONFIG_FSL_ESDHC option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 18:31:05 -04:00
Tom Rini
278b90ce78 configs: Migrate CONFIG_SYS_TEXT_BASE
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set.  This is a strict migration of the current
values into the defconfig and removing them from the headers.

I did not attempt to add more default values in and for now will leave
that to maintainers.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11 09:30:09 -05:00
Tuomas Tynkkynen
ad12dc1844 cmd: Toggle the default value of CONFIG_CMD_IMLS
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:

../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
   i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10 17:51:04 -04:00
Maxime Ripard
a95aee6af7 usb: gadget: Make g_dnl USB settings common
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.

Make them common by renaming them, and convert all the users.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
d2f0f4af4b usb: gadget: usb_ether: Move the interfaces to Kconfig
We need to select an interface for the usb_ether gadget, and they haven't
been converted to Kconfig yet. Add a choice to make sure we have an option
selected, and convert all the users.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
3f33d3c8f4 usb: gadget: Convert USB_ETHER to Kconfig
The USB Ethernet gadget option has not yet been moved to Kconfig, let's
deal with that.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Maxime Ripard
c163668a4a usb: gadget: Move USBNET_HOST_ADDR to Kconfig
While the USB Ethernet device address is already defined in Kconfig, the
host address isn't. Convert it.

Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:04 +02:00
Tom Rini
88663126a0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 20:00:40 -04:00
Simon Glass
218257b01a Convert CONFIG_CMD_BMODE to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_BMODE

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Make this default y and depend on mx5/6/7]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30 10:30:06 -04:00
Patrick Delaunay
b331cd6204 cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT
We convert CONFIG_PARTITION_UUIDS to Kconfig first.  But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28 08:48:03 -05:00
Tom Rini
e5ec48152a Kconfig: Migrate BOARD_LATE_INIT to a select
This option should not really be user selectable.  Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-24 10:35:54 -05:00
Jagan Teki
3788b451e3 config: Move CONFIG_BOARD_LATE_INIT to defconfigs
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 15:12:33 -05:00
Kevin Hilman
25aaebdb12 ARM: imx7s-warp: enable USB gadget ethernet
Enable USB gadget ethernet by default to have networking capabilities.

Tested using DHCP and TFTP to transfer kernel, DT, ramdisk.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-02 17:11:10 +01:00
Tom Rini
6828e602b7 dfu: Migrate to Kconfig
Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
CMD_DFU (as we must have the DFU command enabled to do anything DFU).
Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
options for all of the back end choices that DFU can make use of.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-27 10:46:45 -04:00
Tom Rini
645176d1d5 configs: Migrate CONFIG_USB_STORAGE
In some cases we were missing CONFIG_USB=y so enable that when needed.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09 14:59:35 -04:00
Tom Rini
aca5cd27db configs: Resync with savedefconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09 09:51:28 -04:00
Breno Lima
71813dcb56 warp7: Move some USB configuration options to defconfig
Currently it's recommended to move some configuration options to the
defconfig file.

Move some USB related options to the defconfig file.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-07-28 13:27:20 +02:00
Stefan Agner
be1a17ff68 mx7_common: use Kconfig for ARMv7 non-secure mode
Use existing Kconfig symbols to let the user configure whether to
build a U-Boot with non-secure mode support or not. This also allows
to enable virtualization extension easily.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:15 +02:00
Stefan Agner
c4483093f3 usb: ehci-mx6: introduce config for high active power pin
Add a new config CONFIG_MXC_USB_OTG_HACTIVE which configures the
OTG Power Pin to be high active. Low active is the reset value
of the affected configuration register, hence the config option
is named by the non-reset configuration.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:14 +02:00
Stefan Agner
2deebe2481 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
Create an entry for "config USB_EHCI_MX7" in Kconfig and
switch over to it for all boards.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:14 +02:00
Breno Lima
4beba06688 warp7: Remove CONFIG_BOOTDELAY variable
It's not necessary anymore to declare the CONFIG_BOOTDELAY variable,
it's already set by default as 2 seconds.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-19 19:52:13 +02:00
Tom Rini
7802ce910b configs: Re-sync BOOTDELAY changes
With updated moveconfig.py and an better default, re-generate
the migration of BOOTDELAY to the defconfig.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-17 09:34:49 -04:00
Fabio Estevam
e8bd2a0bf6 warp7: Fix boot by selecting CONFIG_OF_LIBFDT
CONFIG_OF_LIBFDT needs to be selected to avoid the following
boot problem:

reading zImage
6346216 bytes read in 118 ms (51.3 MiB/s)
Booting from mmc ...
reading imx7d-warp.dtb
32593 bytes read in 11 ms (2.8 MiB/s)
Kernel image @ 0x80800000 [ 0x000000 - 0x60d5e8 ]
FDT and ATAGS support not compiled in - hanging
### ERROR ### Please RESET the board ###

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-05-10 14:54:11 -04:00