Commit graph

10 commits

Author SHA1 Message Date
Bartosz Golaszewski
cef443c166 arm: davinci: remove leftover code for dm* SoCs
The support for DaVinci DM* SoCs has been dropped a while ago. There's
still a lot of leftover code in mach-davinci though. Entirely remove
certain files and modify the common code to no longer reference
unsupported chips.

Note: all DaVinci platforms supported in u-boot now define SOC_DA8XX
but not all define SOC_DA850 (e.g. omapl138). We can safely remove
all ifdefs for the former, but let's leave the ones for the latter.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04 13:04:10 -04:00
Bartosz Golaszewski
0c56542592 arm: davinci: remove dead code for PHYs used by DaVinci DM* boards
The support for DaVinci DM* boards has been dropped a while ago. The
code for all those PHYs is no longer used and they have their own
proper PHY drivers in drivers/net/phy anyway. Remove all dead code.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-04 13:04:06 -04:00
Adam Ford
ff83e4c368 ARM: davinci: Remove unused functions from header
There are a few functions defined in the header file, but they are
not referenced by any Davinci code.  In order to make a general
function in the future with static function declarations, this
patch will remove the references all together.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03 17:14:49 +02:00
Keerthy
0f3cf2b3e5 gpio: da8xx: Push generic defines of gpio.h out of mach-davinci
Push generic defines of gpio.h out of mach-davinci to drivers/gpio
now that non-davinci architectures are beginning to use this IP.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix calimain build]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-10 13:35:03 -04:00
Adam Ford
8e51c0f254 dm: gpio: Add DM compatibility to GPIO driver for Davinci
This adds DM_GPIO support for the davinici GPIO driver with
DT support.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-18 14:43:12 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Simon Glass
89f5eaa1ee common: arm: davinci: Move header file out of common
We should not have an arch-specific header file in common.h. Instead, use
the asm/hardware.h header to provide the required declarations, and drop
the common.h changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 12:31:23 -04:00
Fabien Parent
c0fa385c9b davinci: spl: use bootcfg to select boot device
Right now the SPL is trying to load u-boot based on defines, i.e. one
has to define CONFIG_SPL_NAND_SIMPLE to boot from NAND,
or CONFIG_SPL_SPI_LOAD to boot from SPI FLASH, etc...
This prevent us from having a single SPL image that is able to boot from
all media, and one need to build an image for each medium. This
commit is replacing the #ifdef that select the boot medium by reading
the value of the boot pins (via the BOOTCFG register).

Now a single SPL image will be able to read from the boot pin to know
which device should be used to load u-boot.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-14 16:47:16 -05:00
David Lechner
2ac07f75d1 arm: Add support for LEGO MINDSTORMS EV3
This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EEPROM.

The EV3 itself initally boots from write-protected EEPROM, so no
u-boot SPL is needed.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:40 -04:00
Masahiro Yamada
3d357619a5 ARM: davinci: move SoC headers to mach-davinci/include/mach
Move arch/arm/include/asm/arch-davinci/*
  -> arch/arm/mach-davinci/include/mach/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
2015-02-21 08:23:52 -05:00