Commit graph

24 commits

Author SHA1 Message Date
Kunihiko Hayashi
051451ad83 ARM: dts: uniphier: Sync DT with Linux v6.2
Synchronize devicetree sources with Linux v6.2.

- Use GIC interrupt definitions
- Add reg properties in USB-glue and SoC-glue node
- Fix node names to follow the generic names list in DT specification
- Add L2 cache and AHCI nodes
- Update nand and pcie nodes
- And some trivial fixes

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2023-03-06 17:05:40 -05:00
Kunihiko Hayashi
e800263d56 ARM: dts: uniphier: Switch USB node to the original
UniPhier DT applies its own USB node for U-Boot due to the USB driver
constrains. After solving this issue, u-boot allows the original USB node.

After switching USB node, synchronization of USB node with Linux becomes
possible.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2023-03-06 17:05:40 -05:00
Kunihiko Hayashi
dd8c3136aa ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins
UniPhier LD20, PXs2 and PXs3 boards have ethernet phy that has RX/TX delays
of RGMII interface using pull-ups on the RXDLY and TXDLY pins.

So should set the phy-mode to "rgmii-id" to show that RX/TX delays are
enabled.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Ramon  Fried <rfried.dev@gmail.com>
2022-08-08 11:37:57 -04:00
Masahiro Yamada
65282edbdf ARM: dts: uniphier: resync DT with Linux 5.9-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-08-18 02:01:14 +09:00
Masahiro Yamada
0852033309 ARM: uniphier: sync with Linux 5.8-rc4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-11 21:30:21 +09:00
Masahiro Yamada
5ad159623f ARM: dts: uniphier: add reset-names to NAND controller node
Import Linux commits:

37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node")
e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node")

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29 14:11:36 +09:00
Masahiro Yamada
44ebaa8e13 ARM: dts: uniphier: rename DT nodes to follow json-schema
Import the nodename changes I made in Linux for avoiding dt-schama
warnings. This follows the $nodename patterns in the dt-schema.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29 14:10:54 +09:00
Masahiro Yamada
47eb8add27 arm64: dts: uniphier: add reserved-memory for secure memory
[ Linux commit aa38571246c6ac279ebebd141157297bcb959d76 ]

The memory regions specified by /memreserve/ are passed to
early_init_dt_reserve_memory_arch() with nomap=false, so it is
not suitable for reserving memory for Trusted Firmware-A etc.

Use the more robust /reserved-memory node with the no-map property
to prevent the kernel from mapping it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:50 +09:00
Masahiro Yamada
cd33feda6b ARM: dts: uniphier: sync with Linux 5.1-rc4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-17 07:22:23 +09:00
Masahiro Yamada
2001a81cba ARM: uniphier: dts: sync with Linux 4.20
Currently, the DWC3 USB node is out of sync because the bindings
for the UniPhier DWC3 PHY diverged between Linux and U-Boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:50:30 +09:00
Masahiro Yamada
c3ab1e118f mmc: uniphier-sd: sync with Linux
Sync with the driver code and the binding recently merged in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-11 20:37:18 +09:00
Masahiro Yamada
33aae6b5ed ARM: dts: uniphier: sync DT with Linux 4.19-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-11 20:37:16 +09:00
Masahiro Yamada
e885c5a602 ARM: dts: uniphier: sync DT with Linux 4.18-rc1
Now that the clock-frequency information has been moved to the
driver, more DT sync is possible.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-23 01:28:16 +09:00
Masahiro Yamada
c3d3e2a1ef ARM: dts: uniphier: sync with Linux 4.17-rc6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-23 00:32:39 +09:00
Kunihiko Hayashi
3c0fa6ce13 ARM: dts: uniphier: add clock-names and reset-names to ethernet node
Add clock-names and reset-names because this node recognizes multiple
clocks and resets.  ("ether", and so on, for each)

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-23 00:32:39 +09:00
Kunihiko Hayashi
69b3d4e930 ARM: dts: uniphier: add syscon-phy-mode property to each ethernet node
Add syscon-phy-mode property specifying a phandle of system controller
to each ethernet node.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-23 00:32:39 +09:00
Masahiro Yamada
3e98fc1236 ARM: dts: uniphier: sync DT with Linux 4.17-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-18 23:34:36 +09:00
Masahiro Yamada
46820e3f67 ARM: dts: uniphier: sync with Linux 4.16-rc5
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15 22:43:47 +09:00
Masahiro Yamada
b443fb4210 ARM: dts: uniphier: Sync with Linux 4.15-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:29:00 +09:00
Masahiro Yamada
0f72b74b32 ARM: dts: uniphier: update GPIO nodes
Switch to the single node design.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Masahiro Yamada
31c86aa7fd ARM: dts: uniphier: update PXs3 SoC/board DT
Support PXs3 SoC and its reference development board.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30 09:07:04 +09:00
Masahiro Yamada
abb6ac25da ARM: dts: uniphier: sync DT with Linux
Fix the following DTC warnings:
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format error, expected "0"
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/uart@000b0000 simple-bus unit address format error, expected "b0000"
Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-17 21:51:04 +09:00
Masahiro Yamada
7ad79c1291 ARM: dts: uniphier: fix no unit name warnings
Fix warnings reported when built with W=1, by DTC 1.4.2 or later:
  Node /memory has a reg or ranges property, but no unit name

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-14 04:15:24 +09:00
Masahiro Yamada
61e6cc0aa1 ARM: dts: uniphier: add PXs3 SoC/board support
Initial commit for the PXs3 SoC DT.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 16:49:34 +09:00