Commit graph

19 commits

Author SHA1 Message Date
Eric Nelson
e153333eeb i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
The pad settings for DISP0_DATA02 and DISP0_DAT10 were not
set in the same way as DISP0_DAT00-23, causing much flicker
in parallel RGB displays on Dual-Lite and Solo processors.

These settings now match the i.MX6 Dual and Quad core versions.

Note that this fixes a regression in commit b47abc3 and that
this is the second time we've had a regression on these two
pads (See commit e654ddf).

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2014-07-10 15:23:56 +02:00
Andy Ng
da781c60e5 imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
Signed-off-by: Andy Ng <andreas2025@gmail.com>
2014-02-19 10:57:25 +01:00
Eric Nelson
b47abc36aa i.MX6 (DQ/DLS): use macros for mux and pad declarations
This allows the use of either or both declarations from
the files mx6q_pins.h and mx6dl_pins.h.

All board files should include <asm/arch/mx6-pins.h>
with one of the following defined in boards.cfg
    MX6Q   - for boards targeting i.MX6Q or i.MX6D
    MX6DL  - for boards targeting i.MX6DL
    MX6S   - for boards targeting i.MX6S
    MX6QDL - for boards that support any of the above with
             run-time detection

Pad declarations will be MX6_PAD_x for single-variant boards
and MX6Q_PAD_x and MX6DL_PAD_x for boards supporting both
processor classes.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-12-17 17:12:34 +01:00
Eric Nelson
a31d3efae1 i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-11-13 10:19:51 +01:00
Eric Nelson
38d8219801 i.MX6DQ/DLS: remove unused pad declarations
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-11-13 10:19:51 +01:00
Eric Nelson
066b2d68a0 i.MX6DQ/DLS: remove useless mux/pad declarations
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-11-13 10:19:50 +01:00
Eric Nelson
10fda48779 i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-11-13 10:19:50 +01:00
Otavio Salvador
0029bc47ad mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin
This removes the PAD_CTL_DSE_120ohm as done for i.MX6Q's IPU1_DI0_PIN4
pin definition and makes it aligned with 3.0.35-4.1.0 and 3.12
mainline kernel.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-10-31 17:54:23 +01:00
Eric Nelson
ce7a7f5e6b i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
This patch adds the pad to i.MX6DQ and changes the i.MX6DLS
declaration to match the Linux kernel declaration.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Marek Vasut <marex@denx.de>
2013-09-27 13:53:35 +02:00
Eric Nelson
e654ddf7b3 i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
This patch fixes a regression introduced by commit 87d720e0.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-09-20 17:55:37 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Pierre Aubert
87d720e0c2 imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
CC: Stefano Babic <sbabic@denx.de>
2013-06-26 16:47:30 +02:00
Otavio Salvador
5ed15738d9 wandboard: Add support for Carrier Board MicroSD card
Allow use of the carrier board MicroSD card available in the
Wandboard; this allow for loading alternative system from the other
card for testing or upgrade proposes.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25 21:34:28 +02:00
Otavio Salvador
08f32f7d25 wandboard: Add card detection for SOM MicroSD card
This add support to identify if the card is connected or not; so it
does not try to communicate with the controller if no card is
available.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-04-25 21:34:02 +02:00
Fabio Estevam
dc88403e6c iomux-v3: Place pad control definitions into common file
Instead of having the same PAD control definition in each MX6 variant pin file,
place it into a common location.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-04-22 09:56:20 +02:00
Fabio Estevam
e2d282a1b4 Add initial support for Wandboard dual lite and solo.
Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-03-20 11:47:37 +01:00
Eric Nelson
828bd14c10 i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-07 16:43:46 +01:00
Eric Nelson
cfb8b9d335 i.MX6: consolidate pad names for multi-CPU boards
Rename all i.MX6 pad declarations to MX6_PAD_x, so a board
may support either i.MX6Quad/Dual (MX6Q) or i.MX6Dual-Lite/Solo
(MX6DL) by including the proper header.

Boards mx6qarm2, mx6qsabreauto, mx6qsabrelite, and mx6qsabresd
only support MX6Q, so they include mx6q_pins.h.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-03-07 16:43:46 +01:00
Troy Kisky
34275d70fe arch-mx6: add mx6dl_pins.h
Only the values used in the sabrelite board are
added currently. Add more as other boards use them.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-11-10 08:15:40 +01:00