Commit graph

18113 commits

Author SHA1 Message Date
Marek Vasut
97b24d3d51 common: Add symbol handling for generic lists into Makefile
This patch adds essential components for generation of the contents of
the linker section that is used by the linker-generated array. All of
the contents is held in a separate file, u-boot.lst, which is generated
at runtime just before U-Boot is linked.

The purpose of this code is to especially generate the appropriate
boundary symbols around each subsection in the section carrying the
linker-generated arrays. Obviously, the interim linker code for actual
placement of the variables into the section is generated too. The
generated file, u-boot.lst, is included into u-boot.lds via the linker
INCLUDE directive in u-boot.lds .

Adjustments are made in the Makefile and spl/Makefile so that the
u-boot.lds and u-boot-spl.lds depend on their respective .lst files.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-22 08:29:29 -07:00
Shengzhou Liu
047cea3655 powerpc/usb: fix bug of CPU hang when missing USB PHY clock
when missing USB PHY clock, u-boot will hang during USB
initialization when issuing "usb start". We should check
USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case.

Due to controller issue of PHY_CLK_VALID in ULPI mode, we set
USB_EN before checking PHY_CLK_VALID, otherwise PHY_CLK_VALID
doesn't work.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-22 08:25:12 +02:00
Vincent Palatin
8b8d779dac usb: fallback safely when a configuration descriptor is too large
When a USB configuration descriptor was larger than our USB buffer
(512 bytes), we were skipping the full descriptor reading but then we
were still parsing and using it, triggering memory corruptions.
Now in that case, it just skips this device enumeration and displays the
appropriate message to the user, so he can fix the buffer if he wants.

This bug was triggered by some UVC webcams which have very large
configuration descriptors (e.g. a couple of kB) describing all their
supported video encodings.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2012-10-22 08:25:07 +02:00
Gabe Black
e81e79ede1 usb: Support the CONFIG_SYS_64BIT_LBA option
usb_storage wouldn't compile when the CONFIG_SYS_64BIT_LBA option is
turned on because the used fixed size data types in their exported
functions when they should have used lbaint_t for the block count
parameter. That meant that when the sizes happened to be the same, when
using a 28 bit LBA, the driver would build, but when it wasn't, a 48 bit
LBA, things broke.

This change adjusts the signatures to use the right type and makes small
adjustments in the affected functions.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-22 08:25:07 +02:00
Tom Rini
99070db0dc Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/serial/serial_lh7a40x.c

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 18:23:38 -07:00
Albert ARIBAUD
7f14f30a6d patman: force git log commands to not use color
Colored logs confuse patman when analyzing logs.
Add --no-color option in git log commands in case
the default config has color.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:46 -07:00
Simon Glass
eeaec258b7 sandbox: Change global data baudrate to int
This doesn't need to be a long, so change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:46 -07:00
Simon Glass
55f97c1bfb x86: Change global data baudrate to int
This doesn't need to be a long, so change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:46 -07:00
Simon Glass
a25356d771 nds32: Change global data baudrate to int
This doesn't need to be a long, so change it.

Also adjust bi_baudrate to be unsigned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:46 -07:00
Simon Glass
8dc22b00ac mips: Change global data baudrate to int
This doesn't need to be a long, so change it.

Also adjust bi_baudrate to be unsigned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
5e84e5a7d4 blackfin: Change global data baudrate to int
This doesn't need to be a long, so change it.

Also adjust bi_baudrate to be unsigned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
e46e31a83a arm: Change global data baudrate to int
This does not need to be a long, so change it.

Also adjust bi_baudrate to be unsigned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
a8f1f1cd97 sparc: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
a7e5ee9ebb powerpc: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
7a68e330d0 openrisc: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:45 -07:00
Simon Glass
7fffe2fac8 nios2: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Simon Glass
74e8456bc1 microblaze: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Simon Glass
f5a5b3c5ee m68k: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Simon Glass
15dc95d48a avr32: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Simon Glass
ecd4551f14 sh: Change bi_baudrate and global data baudrate to int
These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Hung-Te Lin
44abe47deb input: Add ANSI 3.64 escape sequence generation.
To support Non-ASCII keys (ex, Fn, PgUp/Dn, arrow keys, ...), we need to
translate key code into escape sequence.

(Updated by sjg@chromium.org to move away from a function to store
keycodes, so we can easily record how many were sent. We now need to
return this from input_send_keycodes() so we know whether keys were
generated.)

Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Marc Jones
59a1b72ced input: Fix i8042 keyboard reset
The i8042 keyboard reset was not checking the results of the output
buffer after the reset command. This can jam up some KBC/keyboards.
Also, remove a write to the wrong register and the CONFIG setting
around the incorrect write.

Signed-off-by: Marc Jones <marc.jones@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Louis Yung-Chieh Lo
45fe668f5f input: i8042: Provide feature to disable keyboard before booting kernel
The BIOS leaves the keyboard enabled during boot time so that any
keystroke would interfere kernel driver initialization.

Add a way to disable the keyboard to make sure no scancode will be
generated during the boot time. Note that the keyboard will be
re-enabled again after the kernel driver is up.

This code can be called from the board functions.
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>

Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Gabe Black
48edb304d0 input: Provide a board specific mechanism to decide whether to skip i8042 init
This change adds a board overridable function which can be used to decide
whether or not to initialize the i8042 keyboard controller. On systems where
it isn't actually connected to anything, this can save a significant amount of
boot time.

On Stumpy, this saves about 200ms on boot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Gabe Black
ef94f7fa64 input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty
On x86, the i8042 keyboard controller driver frequently waits for the keyboard
input buffer to be empty to make sure the controller has had a chance to
process the data it was given. The way the delay loop was structured, if the
controller hadn't cleared the corresponding status bit immediately, it would
wait 1ms before checking again. If the keyboard responded quickly but not
instantly, the driver would still wait a full 1ms when perhaps 1us would have
been sufficient. Because udelay is a busy wait anyway, this change decreases
the delay between checks to 1us.

Also, this change gets rid of a hardcoded 250ms delay.

On Stumpy, this saves 100-150ms during boot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Joe Hershberger
ddd8418f7f env: cosmetic: Consilidate the default env definition
There used to be a huge structure duplicated 3 times in the source.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Stephen Warren
6ab6a650a4 disk: initialize name/part fields when returning a whole disk
When get_device_and_partition() finds a disk without a partition table,
under some conditions, it "returns" a disk_partition_t that describes
the entire raw disk. Make sure to initialize all fields in the partition
descriptor in that case.

The value chosen for name is just some arbitrary descriptive string.

The value chosen for info matches the check at the end of
get_device_and_partition(). However, it's probably not that important;
it's not obvious that the value is really used.

Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 13:42:33 -07:00
Simon Glass
39826f0997 arm: fdt: Relocate fdt along with other data
Rather than leave the fdt down next to the code/data, we really should
relocate it along with everything else. For CONFIG_OF_EMBED this happens
automatically, but for CONFIG_OF_SEPARATE it does not.

Add code to copy the fdt and point to the new copy after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 21:38:27 +02:00
Alison Wang
39c7a26352 ColdFire: uart: fix build failure for missing header files
The following commit introduces some build failures for ColdFire
platform.

commit abaef69fbe
Author: Marek Vasut <marex@denx.de>
Date:   Thu Sep 13 16:51:38 2012 +0200

Add the missed header files.

Sign-off-by: Alison Wang <b18965@freescale.com>
2012-10-19 23:52:16 +08:00
Jason Jin
87c9b18687 ColdFire: Fix the build error for Freescale m5282evb board.
Clean up the lds file and fix the environment build error.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-19 23:52:09 +08:00
Jason Jin
fa862dd7ce ColdFire: Fix build error for astro mcf53731 board.
Fix the  build error by clean up the lds file.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-19 23:52:04 +08:00
Marek Vasut
2b758cad8d m68k: net: Fix unused variable in mcfmii.c
The following warning was produced, fix it:

mcfmii.c: In function 'mcffec_miiphy_write':
mcfmii.c:318:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Marek Vasut
c59ac903f2 m68k: Fix unused variable in board.c
The following warning was produced, fix it:

board.c: In function 'board_init_r':
board.c:390:8: warning: unused variable 's' [-Wunused-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Marek Vasut
c1568ca545 m68k: Fix unused variable warning in speed.c
The following warning was produced, fix it:

speed.c: In function 'get_clocks':
speed.c:94:15: warning: variable 'bPci' set but not used [-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Marek Vasut
2b05593da6 m68k: Fix unused variable warning
The fbcs variable was unused, producing the following warning:

cpu_init.c: In function 'cpu_init_f':
cpu_init.c:52:10: warning: unused variable 'fbcs' [-Wunused-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Marek Vasut
37d6cc3176 m68k: Fix wrong assembler instruction in start.S
The jmp _fault generated the following error message, thus change it
to bra _fault:

start.S: Assembler messages:
start.S:310: Error: Conversion of PC relative displacement to absolute

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Philippe De Muyter
2ca7406c64 m68k: Fix relocation errors in start.S
When the environment sectors in the flash are big, one get those errors :

 mcf547x_8x/start.S:173: relocation truncated to fit: R_68K_PC16 against
  symbol `cpu_init_f' defined in .text section in libmcf547x_8x.a(cpu_init.o)
 mcf547x_8x/start.S:174: relocation truncated to fit: R_68K_PC16 against
  symbol `board_init_f' defined in .text section in libm68k.a(board.o)

Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Tom Rini
1fb187b3b8 actux[123]: Update linker script for ELDK 4.2
With ELDK4.2 libserial.o is too large to fit in the area before the
environment.  Swap in libinput instead which is a little smaller.

Cc: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-18 23:15:34 +02:00
402jagan@gmail.com
de1f9ac854 versatile: board configs: Use buffered writes on flash
This patch provides a support to use buffered writes on flash
for versatile and vexpress boards.

This will certainly increase the flash writes.

Signed-off-by: Jagannadha Sutradharudu Teki <402jagan@gmail.com>
2012-10-18 15:59:55 +02:00
Marek Vasut
fb24ffc086 dm: Move s3c24xx USB driver to a proper place
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David Müller <d.mueller@elsoft.ch>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
2012-10-18 06:54:18 +02:00
Marek Vasut
d731282e7c dm: wdt: arm: Move tnetv107x into drivers/watchdog/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Oliver Brown <obrown@adventnetworks.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
2012-10-18 06:52:02 +02:00
Paul Gortmaker
12c79a9578 powerpc: delete Wind River SBC8560/8540 support
The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-17 09:39:16 -07:00
Tom Rini
953cfd2878 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2012-10-17 09:03:59 -07:00
Tom Rini
d1ff690612 Merge branch 'master' of git://git.denx.de/u-boot-mips 2012-10-17 08:57:13 -07:00
Marek Vasut
ff04f6d122 fs: fat: Fix mkcksum() function parameters
The mkcksum() function now takes one parameter, the pointer to
11-byte wide character array, which it then operates on.

Currently, the function is wrongly passed (dir_entry)->name, which
is only 8-byte wide character array. Though by further inspecting
the dir_entry structure, it can be noticed that the name[8] entry
is immediatelly followed by ext[3] entry. Thus, name[8] and ext[3]
in the dir_entry structure actually work as this 11-byte wide array
since they're placed right next to each other by current compiler
behavior.

Depending on this is obviously wrong, thus fix this by correctly
passing both (dir_entry)->name and (dir_entry)->ext to the mkcksum()
function and adjust the function appropriately.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:59:11 -07:00
Stephen Warren
e2e9b37898 disk: part_dos: print partition UUID in partition list
This information may be useful to compare against command "part uuid",
or if you want to manually paste the information into the kernel
command-line.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
[trini: print_one_part / print_part_dos output strings didn't quite
match before the changes]
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-17 07:59:11 -07:00
Stephen Warren
304b571130 disk: part_dos: checkpatch cleanups
Minor cleanups required so later patches don't trigger checkpatch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 07:59:11 -07:00
Stephen Warren
b4414f4a4a disk: part_efi: set bootable flag in partition objects
A partition is considered bootable if it either has the "legacy BIOS
bootable" flag set, or if the partition type UUID matches the standard
"system" type.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 07:59:10 -07:00
Stephen Warren
13bf2f55d9 disk: part_efi: print raw partition attributes
When printing the EFI partition table, print the raw attributes. Convert
struct gpt_entry_attributes to a union to allow raw access.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 07:59:10 -07:00
Stephen Warren
1c8346ab38 disk: part_efi: add new partition attribute definitions
Add no_block_io_protocol and legacy_bios_bootable attribute definitions.
These are sourced from UEFI Spec 2.3, page 105, table 19. Credits to the
libparted source for the specification pointer.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 07:59:10 -07:00