Commit graph

5 commits

Author SHA1 Message Date
Dario Binacchi
ff94c15a3c video: omap: add panel driver
The previous version of am335x-fb.c contained the functionalities of two
drivers that this patch has split. It was a video type driver that used
the same registration compatible string that now registers a panel type
driver. The proof of this is that two compatible strings were referred
to within the same driver.
There are now two drivers, each with its own compatible string,
functions and API.
Furthermore, the panel driver, in addition to decoding the display
timings, is now also able to manage the backlight.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:27 +05:30
Dario Binacchi
72e0a0e1c7 arm: dts: am335x: add 'u-boot, dm-pre-reloc' to panel
Add the "u-boot,dm-pre-reloc" property to the "ti,tilcdc,panel"
compatible node. In this way the video-uclass module can allocate the
amount of memory needed to be assigned to the frame buffer.
For boards that support Linux the property is added to the *-u-boot.dtsi
file since it is a u-boot specific dt flag.

Ran building tests with CONFIG_AM335X_LCD enabled and disabled for the
following configurations:
 - brxre1_defconfig           --> success
 - am335x_guardian_defconfig  --> success
 - am335x_evm_defconfig       --> success
 - da850evm_defconfig         --> failure with CONFIG_AM335X_LCD enabled

Enabling CONFIG_AM335X_LCD in da850evm_defconfig causes building errors
even without applying the patch. The driver has never been enabled on the
da850 and must be adapted for this platform.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Felix Brack <fb@ltec.ch>
2020-03-03 13:08:14 +05:30
Hannes Schmelzer
05767707a8 dts: am335x-brsmarc1/xre1: insert phy_id again
commit 3b3e8a37d3
("arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id")

did sync with recent linux kernel and replaced therefore the 'phy_id'
property with a phy-handle pointing to the mdio.

This is OK for linux, but introduces trouble with the already running
vxWorks on this target.

So this commit here re-inerts the phy_id property beside the phy-handle
property to be compatible with both.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-12-13 13:01:12 -05:00
Grygorii Strashko
3b3e8a37d3 arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Felix Brack <fb@ltec.ch>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-11-03 09:15:46 -05:00
Hannes Schmelzer
eaba7df704 board/BuR/brxre1: convert do DM
This commit converts the brxre1 board to DM,
for this we have todo following things:

- add a devicetree-file for this board
- drop all obsolete settings from board header-file
- use dm_i2c_xxx calls for read/write to the resetcontroller
- request gpios before operate them

Serues-cc: trini@konsulko.com
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-02-19 08:55:43 -05:00