Commit graph

240 commits

Author SHA1 Message Date
Kory Maincent
95300f203f pytest: add sandbox test for "extension" command
This commit extends the sandbox to implement a dummy
extension_board_scan() function and enables the extension command in
the sandbox configuration. It then adds a test that checks the proper
functionality of the extension command by applying two Device Tree
overlays to the sandbox Device Tree.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[trini: Limit to running on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-13 13:09:09 -04:00
Dario Binacchi
a47abd7bf4 Revert "fdt: translate address if #size-cells = <0>"
This reverts commit d64b9cdcd4.

As pointed by [1] and [2], the reverted patch made every DT 'reg'
property translatable. What the patch was trying to fix was fixed in a
different way from previously submitted patches which instead of
correcting the generic address translation function fixed the issue with
appropriate platform code.

[1] https://patchwork.ozlabs.org/project/uboot/patch/1614324949-61314-1-git-send-email-bmeng.cn@gmail.com/
[2] https://lore.kernel.org/linux-clk/20210402192054.7934-1-dariobin@libero.it/T/

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-12 16:27:57 +05:30
Rasmus Villemoes
8c72842af5 sandbox: add test of CONFIG_ENV_IMPORT_FDT
Check that a variable defined in /config/environment is found in the
run-time environment, and that clearing fdt_env_path from within that
node works.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: Conditionalize the test being linked in]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-04 12:52:30 -04:00
Sean Anderson
1cbfed8d3e test: Add gpio-sysinfo test
This adds a test for the gpio-sysinfo driver.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-04 07:57:18 -04:00
Neil Armstrong
bdfe6907e5 test: reset: Extend base reset test to catch error
With this extended test, we get the following failure :

=> ut dm reset_base
Test: dm_test_reset_base: reset.c
test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2)
Test: dm_test_reset_base: reset.c (flat tree)
test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2)
Failures: 2

A fix is needed in reset_get_by_index_nodev() when introduced in [1].

[1] ea9dc35aab ("reset: Get the RESET by index without device")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-27 08:07:05 -04:00
Tom Rini
2fbc804715 Merge tag 'ti-v2021.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Support for pinmux status command on beaglebone
- Updates for MMC speed modes for J721e-evm
- Fix MMC booting on omap35_logic_somlv board
2021-04-18 08:46:39 -04:00
Bin Meng
534c69b09a test: dm: Add a case to test ofnode_phy_is_fixed_link()
This adds a test case to test the new ofnode_phy_is_fixed_link() API.
Both the new and old DT bindings are covered.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Claudiu Manoil
ff98da0667 sandbox: Add a DSA sandbox driver and unit test
The DSA sandbox driver is used for unit testing the DSA class code.
It implements a simple 2 port switch plus 1 CPU port, and uses a
very simple tag to identify the ports.

The DSA sandbox device is connected via CPU port to a regular Ethernet
sandbox device, called 'dsa-test-eth, managed by the existing eth
sandbox driver.  The 'dsa-test-eth' is not intended for testing the
eth class code however, but it is used to emulate traffic through the
'lan0' and 'lan1' front pannel switch ports.  To achieve this the dsa
sandbox driver registers a tx handler for the 'dsa-test-eth' device.
The switch ports, labeled as 'lan0' and 'lan1', are also registered
as eth devices by the dsa class code this time.  So pinging through
these switch ports is as easy as:

=> setenv ethact lan0
=> ping 1.2.3.5

Unit tests for the dsa class code were also added.  The 'dsa_probe'
test exercises most API functions from dsa.h.  The 'dsa' unit test
simply exercises ARP/ICMP traffic through the two switch ports,
including tag injection and extraction, with the help of the dsa
sandbox driver.

I took care to minimize the impact on the existing eth unit tests,
though some adjustments needed to be made with the addition of
extra eth interfaces used by the dsa unit tests. The additional eth
interfaces also require MAC addresses, these have been added to the
sandbox default environment.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20210216224804.3355044-5-olteanv@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Etienne Carriere
0124218b8b firmware: scmi: sandbox test for voltage regulator
Implement sandbox regulator devices for SCMI voltage domains
and test them in DM scmi tests.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12 17:17:11 -04:00
Dario Binacchi
5532262d46 test: pinmux: add test for 'pinctrl-single' driver
The test adds two pinmux nodes to the device tree, one to test when a
register changes only one pin's mux (pinctrl-single,pins), and the other
to test when more than one pin's mux is changed (pinctrl-single,bits).
This required replacing the controller's register access functions when
the driver is used on sandbox.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 11:17:15 +05:30
Vincent Stehlé
619a81516d sandbox: dtsi: add rng
Having an rng in the sandbox is useful not only for tests but also for e.g.
UEFI. Therefore, copy the rng node from test.dts to sandbox.dtsi.

In the case of UEFI, it can then be verified with `efidebug dh' that a
"Random Number Generator" protocol is indeed present.

This also fixes the following `bootefi' error:

  Missing RNG device for EFI_RNG_PROTOCOL

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Simon Glass <sjg@chromium.org>
2021-03-27 13:59:36 +13:00
Simon Glass
3a825d3fa7 Revert "sandbox: Disable I2C emulators in SPL"
With recent changes this can be supported again. Add it back.

This reverts commit d85f2c4f29.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
8813986dfd clk: sandbox: Create a special fixed-rate driver
Create a version of this driver for sandbox so that it can use the
of-platdata struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
c4085d733b sandbox: i2c: Rename driver names to work with of-platdata
Some of these do not follow the rules. Make sure the driver name matches
the compatible string in all cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Simon Glass
23f40a3abf sandbox: Make sandbox,emul more conventional
At present this property is a phandle but does not have a #xxx-cells
property to match it. Add one so that is works the same as gpio and clock
phandles.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Heinrich Schuchardt
4a2a78ca5c sandbox: enable cros-ec-keyb in test.dtb
Currently keyboard input fails in the GUI window opened by

    ./u-boot -T -l

Add the missing include to test.dts.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:26 +13:00
Tom Rini
8f7a16aac3 - adds adc-keys button driver
- fix meson-saradc driver to get reference voltage
 - add adc-keys test for sandbox
 - enable adc-keys for VIM3 & VIM3L boards
 - fix button.h build
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmAzv0gACgkQd9zb2sjI
 SdGUaw//ZeWLd5uVOIb7lWW/LyEM8gjll3SGm40YMvxucBkb3tYyQzWpInUDAua0
 +rOpXptlCZ6WMfTJ2PhB0e30aZexgN3XsvHYEMEV7MGmk1HoUfqGHiDWcI1pDLD0
 p8cmoNoDYWDUqj1J1ibUUOjK+SrAXjezp+kxSjP0ttpXX2RxhXEZrFwzSK6uqUZk
 acqLwg+dOZZLtYZb1gYiDu2NHxnLEqRGqoG/D5emKjZQ3Ofquw+/TFawWpZH5qZf
 cRWCtEo8b9QMdgkI9wvgTHPfPGIP3mkRfQpGrhUmtDsX15s3VVIsEDtjmLluXn6P
 TjVocElz2BrsYENFLo7vt/V7A7MQ6n/276y3H6hyzPwM/LMPLWUsSowiYPVgfXzy
 td8f5NgH8996LN79ia8ZlVYeV3XJu1w26l7kSfBpybS1HVXNTSCsHy5a9y2vjl1B
 YH2O8i7yLxwld/ce0oQtu+6SiFaKWBUdc1FQXOvXeYy89VsRqvaS7RMI2yF3GCcb
 Ov38QVkq2hWIyz4CfpyKtXGSr/H7tOtQdEi9eAMeJwbBprMh/fjpeI8M0QAGdAW0
 F5jUFHK4+BFlqOFphTb00SYLFPCBRfK4kwg2azfQs4589ShlcLaY1RkGRsezLCj2
 bqwITNC+bLup5MSseBr/CgMaXR7JMxbYOuYlLupzRyo5yI0MWvo=
 =/PJV
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210222' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- adds adc-keys button driver
- fix meson-saradc driver to get reference voltage
- add adc-keys test for sandbox
- enable adc-keys for VIM3 & VIM3L boards
- fix button.h build
2021-02-22 12:37:02 -05:00
Nicolas Saenz Julienne
e88018769c dm: test: Add test case for dev->dma_offset
Add test to validate dev->dma_offset is properly set on devices.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:25 +01:00
Nicolas Saenz Julienne
283628c412 dm: test: Add test case for dev_get_dma_ranges()
Introduce some new nodes in sandbox's test device-tree and dm tests in
order to validate dev_get_dma_range().

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:25 +01:00
Marek Szyprowski
289d0ead28 test: add a simple test for the adc-keys button driver
Add adc-keys device to the sandbox/test.dts and connect it to the channel
#3 of the sandbox_adc driver. The default values sampled by sandbox_adc
driver determines that button3 and button4 are released and button5 is
pressed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-18 11:37:26 +01:00
Simon Glass
ff5fa7d626 dm: core: Update ofnode_read_fmap_entry() to read hashes
At present this function uses the old format for reading hashes. Add
support for the current format.

Add a test while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30 14:25:42 -07:00
Simon Glass
d85f2c4f29 sandbox: Disable I2C emulators in SPL
These cannot work with of-platdata since they currently need the
devicetree at runtime. Disable the emulators and the sandbox I2C driver
that needs them. We can enable these later, if needed for testing.

Switch the of_plat_parent test over to use a simple bus instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-30 14:25:41 -07:00
Dario Binacchi
15daa4860b dm: core: add a function to decode display timings
The patch adds a function to get display timings from the device tree
node attached to the device.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:05 +05:30
Dario Binacchi
d64b9cdcd4 fdt: translate address if #size-cells = <0>
The __of_translate_address routine translates an address from the
device tree into a CPU physical address. A note in the description of
the routine explains that the crossing of any level with
since inherited from IBM. This does not happen for Texas Instruments, or
at least for the beaglebone device tree. Without this patch, in fact,
the translation into physical addresses of the registers contained in the
am33xx-clocks.dtsi nodes would not be possible. They all have a parent
with #size-cells = <0>.

The CONFIG_OF_TRANSLATE_ZERO_SIZE_CELLS symbol makes translation
possible even in the case of crossing levels with #size-cells = <0>.

The patch acts conservatively on address translation, except for
removing a check within the of_translate_one function in the
drivers/core/of_addr.c file:

+
        ranges = of_get_property(parent, rprop, &rlen);
-       if (ranges == NULL && !of_empty_ranges_quirk(parent)) {
-               debug("no ranges; cannot translate\n");
-               return 1;
-       }
        if (ranges == NULL || rlen == 0) {
                offset = of_read_number(addr, na);
                memset(addr, 0, pna * 4);
		debug("empty ranges; 1:1 translation\n");

There are two reasons:
1 The function of_empty_ranges_quirk always returns false, invalidating
  the following if statement in case of null ranges. Therefore one of
  the two checks is useless.

2 The implementation of the of_translate_one function found in the
  common/fdt_support.c file has removed this check while keeping the one
  about the 1:1 translation.

The patch adds a test and modifies a check for the correctness of an
address in the case of enabling translation also for zero size cells.
The added test checks translations of addresses generated by nodes of
a device tree similar to those you can find in the files am33xx.dtsi
and am33xx-clocks.dtsi for which the patch was created.

The patch was also tested on a beaglebone black board. The addresses
generated for the registers of the loaded drivers are those specified
by the AM335x reference manual.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:05 +05:30
Simon Glass
370746ada7 sandbox: Update dts files to reduce SPL size
At present there are require a few devices in the devicetree which are
not actually used in SPL. This will cause problems with the new
of-platdata, since it will try to instantiate devices which are not
compiled into U-Boot.

Update the devicetree to remove these devices from SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
acfb5308f5 sandbox: Drop unnecessary test node
The spl-test4 node deliberately has an invalid compatible string. This
causes a warning from dtoc and the check it does is not really necessary.
Drop it, to avoid the warning and associated confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Ovidiu Panait
1dc53ce71d sandbox: test: Add a second SPI slave on sandbox_spi bus
Place a second spi slave on the sandbox_spi bus, to be used by the
spi_claim_bus() testcase we are about to introduce. We need to make sure
that jumping between slaves calling spi_claim_bus() sets the bus speed and
mode appropriately. Use different max-hz and mode properties for this new
slave.

Also, update sandbox_spi cs_info call to allow activity on CS0/CS1 and
adapt dm_test_spi_find() testcase for this new setup.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:25 -07:00
Simon Glass
93f44e8a8c dm: test: Add a test for DM_UC_FLAG_NO_AUTO_SEQ
Check that this flag operates as expected. This patch is not earlier in
this series since is uses the new behaviour of dev_seq().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
981426e350 dm: Switch over to use new sequence number for dev_seq()
Update this function to use the new sequence number and fix up the test
that deals with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
3a8ee3df83 board: Rename uclass to sysinfo
This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.

In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.

The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.

Rename everything accordingly.

Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00
Simon Glass
fbe27a54eb dm: Add a test for of-platdata parent information
Add a simple test that we can obtain the correct parent for an I2C
device. This requires updating the driver names to match the compatible
strings, adding them to the devicetree and enabling a few options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
88280529bd dm: test: Add a test for of-platdata phandles
We have a test in dtoc for this feature, but not one in U-Boot itself.
Add a simple test that checks that the information comes through
correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Jean-Jacques Hiblot
739592ccbb test: Add tests for the multiplexer framework
Provide tests to check the behavior of the multiplexer framework.

Two sets of tests are added. One is using an emulated multiplexer driver
that can be used to test basic functionality like select, deselect, etc.
The other is using the mmio mux which adds tests specific to it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Heinrich Schuchardt
39916bb45f test: sharpen button label unit test
Using different strings for the device tree node labels and the label
property of buttons sharpens the button label unit test.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-10-14 11:16:34 -04:00
Sean Anderson
3e41c7b253 test: dm: Test for default led naming
This modifies the existing led test to check for default led naming as
added in the previous patch.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
7f0f1806e3 test: pinmux: Add test for pin muxing
This extends the pinctrl-sandbox driver to support pin muxing, and adds a
test for that behaviour. The test is done in C and not python (like the
existing tests for the pinctrl uclass) because it needs to call
pinctrl_select_state.  Another option could be to add a command that
invokes pinctrl_select_state and then test everything in
test/py/tests/test_pinmux.py.

The pinctrl-sandbox driver now mimics the way that many pinmux devices
work.  There are two groups of pins which are muxed together, as well as
four pins which are muxed individually. I have tried to test all normal
paths. However, very few error cases are explicitly checked for.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Heinrich Schuchardt
175e8322bc sandbox: avoid duplicate backslash input
When using SDL for input the SDL key codes are first converted to Linux key
codes and then to matrix entries of the cross wired keyboard.

We must not map any key code to two different places on the keyboard. So
comment out one backslash position.

Update the rest of the file from Linux 5.7.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Patrick Delaunay
cc72f3e026 test: dm: add test for phandle access functions
Add unitary test for phandle access functions
- ofnode_count_phandle_with_args
- ofnode_parse_phandle_with_args
- dev_count_phandle_with_args
- dev_read_phandle_with_args

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Etienne Carriere
c0dd177a99 firmware: smci: sandbox test for SCMI reset controllers
Add tests for SCMI reset controllers. A test device driver
sandbox-scmi_devices.c is used to get reset resources, allowing further
resets manipulation.

Change sandbox-smci_agent to emulate 1 reset controller exposed through
an agent. Add DM test scmi_resets to test this reset controller.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 11:55:24 -04:00
Etienne Carriere
87d4f277d4 firmware: scmi: sandbox test for SCMI clocks
Add tests for SCMI clocks. A test device driver sandbox-scmi_devices.c
is used to get clock resources, allowing further clock manipulation.

Change sandbox-smci_agent to emulate 3 clocks exposed through 2 agents.
Add DM test scmi_clocks to test these 3 clocks.
Update DM test sandbox_scmi_agent with load/remove test sequences
factorized by {load|remove}_sandbox_scmi_test_devices() helper functions.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 11:55:23 -04:00
Etienne Carriere
358599efd8 firmware: add SCMI agent uclass
This change introduces SCMI agent uclass to interact with a firmware
using the SCMI protocols [1].

SCMI agent uclass currently supports a single method to request
processing of the SCMI message by an identified server. A SCMI message
is made of a byte payload associated to a protocol ID and a message ID,
all defined by the SCMI specification [1]. On return from process_msg()
method, the caller gets the service response.

SCMI agent uclass defines a post bind generic sequence for all devices.
The sequence binds all the SCMI protocols listed in the FDT for that
SCMI agent device. Currently none, but later change will introduce
protocols.

This change implements a simple sandbox device for the SCMI agent uclass.
The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages.
To prepare for further test support, the sandbox exposes a architecture
function for test application to read the sandbox emulated devices state.
Currently supports 2 SCMI agents, identified by an ID in the FDT device
name. The simplistic DM test does nothing yet.

SCMI agent uclass is designed for platforms that embed a SCMI server in
a firmware hosted somewhere, for example in a companion co-processor or
in the secure world of the executing processor. SCMI protocols allow an
SCMI agent to discover and access external resources as clock, reset
controllers and more. SCMI agent and server communicate following the
SCMI specification [1]. This SCMI agent implementation complies with
the DT bindings defined in the Linux kernel source tree regarding
SCMI agent description since v5.8.

Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 11:55:23 -04:00
Jean-Jacques Hiblot
0ced26a494 test: dm: Add tests for regmap managed API and regmap fields
The tests rely on a dummy driver to allocate and initialize the regmaps
and the regmap fields using the managed API. The first test checks if
the regmap config fields like width, reg_offset_shift, range specifiers,
etc work. The second test checks if regmap fields behave properly (mask
and shift are ok) by peeking into the regmap.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 11:55:23 -04:00
Jean-Jacques Hiblot
88e6a60e4a test: gpio: Add tests for the managed API
Add a test to verify that GPIOs can be acquired/released using the managed
API. Also check that the GPIOs are released when the consumer device is
removed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-09-30 11:55:22 -04:00
Sean Anderson
7616e3687e timer: Add a test for timer_timebase_fallback
To test this function, sandbox CPU must set cpu_platdata.timebase_freq on
bind. It also needs to expose a method to set the current cpu. I also make
some most members of cpu_sandbox_ops static.

On the timer side, the device tree property
sandbox,timebase-frequency-fallback controls whether sandbox_timer_probe
falls back to time_timebase_fallback or to SANDBOX_TIMER_RATE.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 08:54:45 +08:00
Suneel Garapati
4cf56ec07f pci: pci-uclass: Add multi entry support for memory regions
Enable PCI memory regions in ranges property to be of multiple entry.
This helps to add support for SoC's like OcteonTX/TX2 where every
peripheral is on PCI bus.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-25 08:01:16 +02:00
Patrice Chotard
1f0d5885db sandbox: dts: Add compatible string for bind-test node
Usage of lists_bind_fdt() in bind command imposes to add
a compatible string for bind-test node.

Others impacts are:
  - bind-test node is binded at sandbox start, so no need to bind it
    in test_bind_unbind_with_node() test.
  - As explained just above, after sandbox start, now a phy exist.
    In test/dm/phy.c, it was verified that a third phy didn't exist,
    now we must verified that a fourth phy doesn't exist.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22 07:58:39 -06:00
Michal Simek
f692b479f0 i2c: eeprom: Use reg property instead of offset and size
Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20 09:49:20 +02:00
Philippe Reynes
a6c6f0f0c8 test/py: add tests for the button commands
Adds tests for the button commands.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28 19:30:39 -06:00
Philippe Reynes
bd3e4882c7 sandbox: dtsi: add buttons
Adds two buttons on sandbox so button framework may be tested.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28 19:30:39 -06:00
Philippe Reynes
037a56d6b1 sandbox, test: change hog gpio
Since commit 9ba84329dc ("sandbox, test: add test for GPIO_HOG
function"), the gpio_a 0,1,2 and 3 are used by hog in test.dts.
But 2 leds 'sandbox:red' and 'sandbox:green' are using gpio_a 0
and 1. As hog always request his gpios, the led command on both
led is broken:

=> led sandbox:red
LED 'sandbox:red' not found (err=-16)

The gpio is already requested by hog, so it can't be enabled
for led 'sandbox:red'.

This commit change the gpio used by hog to 10, 11, 12 and 13,
so the led command could be used again with 'sandbox:red' and
'sandbox:green'.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-28 19:30:39 -06:00