Commit graph

158 commits

Author SHA1 Message Date
Stephen Warren
47b7164450 fs-test.sh: fix pre-requisite detection
In the following snippet:

if [ ! -x `which $prereq` ]; then

When $prereq does not exist, `which $prereq` evaluates to the empty string,
which results in *no* argument being passed to the -x operator, which then
evaluates to true, which is the equivalent of the prereq having been found. In
order for this to fail as expected, we must pass an empty argument, which then
causes -x to fail. Do this by wrapping the `` in quotes so there's always an
argument to -x, even if the value of the argument is zero-length.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:34 -04:00
Stephen Warren
4a28274227 test: fat: add test of non-contiguous file reads
In my patch series to replace fs/fat with "ff.c", I enhanced ff.c to
optimize file reading, so that reads of contiguous clusters are submitted
to the IO device as a single read. This test attempts to torture-test
edge-cases of that enhancement.

BTW, the only way I found to validate that this script actually does
create non-contiguous files was to manually inspect the FAT bitmap in a
hex dump of the FAT image. hdparm --fibmap doesn't work on loop-mounted
filesystems. filefrag -v -e seems to lie about files being contiguous
when they aren't.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:34 -04:00
Nishanth Menon
bfaa2d99dc test: Add basic tests for remoteproc
Use the sandbox environment for the basic tests.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:40 -04:00
Tom Rini
e8de6d7b4a test/fs/fs-test.sh: Update expected results and TC10 logic
With the changes in 7a3e70c we now get read(2) behavior so trying to
read 2MB with 1MB left in the file results in 1MB read and a warning.
We update the test logic here to make sure we read back 1MB as expected.
This change however changes the overall summary as while EXT4 continues
to not have offset support the test now fails when expected to pass
rather than fails when expected to fail (and we report that as pass).

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-11 17:12:14 -04:00
Julius Werner
027b728d4a Add support for LZ4 decompression algorithm
This patch adds support for LZ4-compressed FIT image contents. This
algorithm has a slightly worse compression ration than LZO while being
nearly twice as fast to decompress. When loading images from a fast
storage medium this usually results in a boot time win.

Sandbox-tested only since I don't have a U-Boot development system set
up right now. The code was imported unchanged from coreboot where it's
proven to work, though. I'm mostly interested in getting this recognized
by mkImage for use in a downstream project.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-11 17:12:10 -04:00
Simon Glass
cbfc2ff9da dm: test: Show the amount of leaked memory on error
Adjust the memory leak tests to show the amount of memory leaked. This can
be a useful signal as to what is wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-05 15:47:49 +01:00
Bin Meng
71d7971fac dm: test: Add a new test case for dm_test_eth_rotate
Add one more ethernet device node in the sandbox test device tree,
with name 'sbe5'. This is to support a new test case for testing
network device rotation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-09 07:48:03 -06:00
Lukasz Majewski
33a6103578 dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID
dfu-util allows filtering on USB device vendor:product ID by using
the -d flag (-d 0451:d022).
Such option is very handy when many DFU devices are connected to a single
host PC. This commit allows testing when above situation emerges.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Simon Glass <sjg@chromium.org>

Tested-by: Lukasz Majewski <l.majewski@majess.pl>
Test HW - AM335x Beagle Bone Black
NOTE: Max size of file to transfer: 2MiB
2015-09-07 13:41:03 +02:00
Stephen Warren
04812605f3 fs-test.sh: minor fixes
- Re-direct stderr into the log files, so any errors U-Boot emits are
  visible in the logs. This is relevant if the "reset" shell command
  attempts to report that it's not supported on the sandbox board.
- Fix test_fs_nonfs() to name the files it created differently for each
  invocation. Otherwise, the logs from different tests overwrite
  each-other.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Suriyan Ramasami <suriyan.r@gmail.com>
2015-08-18 13:45:59 -04:00
Masahiro Yamada
40b6f2d020 devres: add debug command to dump device resources
This new command can dump all device resources associated to
each device.  The fields in every line shows:
  - The address of the resource
  - The size of the resource
  - The name of the release function
  - The stage in which the resource has been acquired (BIND/PROBE)

Currently, there is no driver using devres, but if such drivers are
implemented, the output of this command should look like this:

=> dm devres
- root_driver
- soc
- extbus
- serial@54006800
    bfb541e8 (8 byte) devm_kmalloc_release  BIND
    bfb54440 (4 byte) devm_kmalloc_release  PROBE
    bfb54460 (4 byte) devm_kmalloc_release  PROBE
- serial@54006900
    bfb54270 (8 byte) devm_kmalloc_release  BIND
- gpio@55000000
- i2c@58780000
    bfb5bce8 (12 byte) devm_kmalloc_release  PROBE
    bfb5bd10 (4 byte) devm_kmalloc_release  PROBE
- eeprom
    bfb54418 (12 byte) devm_kmalloc_release  BIND

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-06 07:44:29 -06:00
Simon Glass
86075bab27 test: Add a test for regmap
We use syscon to test that the regmap functions work as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:33 -06:00
Simon Glass
04035fd36c dm: test: Add a test for the system controller uclass
Add a test to confirm that we can access system controllers and find their
driver data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:33 -06:00
Simon Glass
3c43fba3d2 dm: test: Add a test for the LED uclass
Add a test to confirm that we can adjust LEDs using the led_gpio driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
8e6cc46178 dm: test: Add a test for the mmc uclass
Add a test to confirm that we can probe this device. Since there is no
MMC stack support in sandbox at present, this is as far as the test goes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
64ce0cad9e dm: test: Add a test for the ram uclass
Add a test to confirm that we can probe this device and get information on
the available RAM.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
201c29a2d6 dm: test: Add a test for the reset uclass
Add tests that confirm that the drivers work as expected, and we can walk
through the available reset types trying to reset the board.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:31 -06:00
Simon Glass
6a1c7cef14 dm: test: Add tests for the clk uclass
Add tests of each API call using a sandbox clock device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
c02790ce12 dm: test: Allow test names to leave out the dm_test_ prefix
All driver model tests have a dm_test_ prefix. Ignore it when matching a
test name. This makes it easier to run individual tests, like this:

   ./sandbox/u-boot -d ./sandbox/arch/sandbox/dts/test.dtb \
	-c "ut dm clk_periph"

We can use 'clk_periph' instead of 'dm_test_clk_periph'.

Also print a message if the requested test is not found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
3b55d30f6f dm: pmic: Split output from function
The regulator_autoset() function mixes printf() output and PMIC adjustment
code. It provides a boolean to control the output. It is better to avoid
missing logic and output, and this permits a smaller SPL code size. So
split the output into a separate function.

Also rename the function to have a by_name() suffix, since we would like
to be able to pass a device when we know it, and thus avoid the name
search.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21 17:39:26 -06:00
Simon Glass
304fbef156 dm: Move the tree/uclass dump code into its own file
In SPL it is sometimes useful to be able to obtain a dump of the current
driver model state. Since commands are not available, provide a way to
directly call the functions to output this information.

Adjust the existing commands to use these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:22 -06:00
Simon Glass
2bb02e4fe2 dm: pci: Allow PCI bus numbering aliases
Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:34:47 -06:00
Karl Apsite
657fd2d031 add test for two 'loadables'
Nothing too fancy.  A simple test that attmpts to load two loadables and
verify that they are properly unpacked in the u-boot sandbox.
Signed-off-by: Karl Apsite <Karl.Apsite@dornerworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-28 08:18:21 -04:00
Joe Hershberger
f68c2b2592 test: env: Add a test of the new regex behavior for attrs
The behavior of the env attrs depends on CONFIG_REGEX. Add an additional
test if that variable is set.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b04d3553ee test: env: Add test for verifying env attrs
Add a test of the env_attr_lookup() function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
421f86f329 test: env: Add test framework for env
Add a new "env" subcommand to the ut command.

This will run unit tests on the env code. This should be targetable to
any device that supports the env features needed for the tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
b6227d3993 test: dm: Recover the driver model tree after tests
Put the driver model for the system back into a good state after
completing the DM testing.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
09129bec8e test: dm: eth: Handle failed test env cleanup
Make sure that the env gets cleaned up after a test fails so that other
tests aren't affected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
7cccc66af5 test: dm: Don't bail on all tests if one test fails
There's not much point in having a failure count if we always give up on
the first failure. Also stop clearing the entire state between tests.

Make sure that any failures are still passed out to the command line.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
feb3847250 test: Move the unit tests to their own menu
Make all unit tests selectable as a menu of test suites instead of just
sitting in the top-level menu individually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c812f722f8 test: dm: Move the time test over to the ut command
Unify the command for running unit tests further by moving the "ut_time"
command over to "ut time".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
40441e0bd3 test: dm: Move the dm tests over to the ut command
Unify the command for running unit tests further by moving the "dm test"
command over to "ut dm".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
c617ede08a test: Add a common unit test command
Add a command that all other unit tests should be a sub-command of.
Also include a command that will run all tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
e721b882e9 test: Generalize the unit test framework
Separate the ability to define tests and assert status of test functions
from the dm tests so they can be used more consistently throughout all
tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:16 -04:00
Joe Hershberger
73c2bbeea3 net: Apply default format rules to all ethaddr
Use a regular expression to apply the default formatting flags for all
ethaddr env vars.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:20 -04:00
Przemyslaw Marczak
f64000c302 test: dm: test.dts - move to sandbox dts directory
The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.

This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.

Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:59:07 -06:00
Przemyslaw Marczak
e8f339e0e8 test: dm: add sandbox PMIC framework tests
This change adds new file to sandbox driver model test environment.
The file is: test/dm/power.c, and it includes tests for PMIC framework,
which includes PMIC uclass and REGULATOR uclass.

All tests are based od Sandbox PMIC emulated device. Some test constants for
this device are defined in the header: include/power/sandbox_pmic.h

PMIC tests includes:
- pmic get - tests, that pmic_get() returns the requested device
- pmic I/O - tests I/O by writing and reading some values to PMIC's registers
             and then compares, that the write/read values are equal.

The regulator tests includes:
- Regulator get by devname/platname
- Voltage set/get
- Current set/get
- Enable set/get
- Mode set/get
- Autoset
- List autoset

For the regulator 'get' test, the returned device pointers are compared,
and their names are also compared to the requested one.
Every other test, first sets the given attribute and next try to get it.
The test pass, when the set/get values are equal.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Simon Glass
8271f5d4c3 test: Add a simple time test
Sometimes the time functions are incorrect due to bad time support on a
board. Add a unit test which tries to detect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06 12:48:37 -06:00
Simon Glass
4772511475 dm: rtc: Add tests for real-time clocks
Add some simple tests to verify that the RTC uclass works correctly in
U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Simon Glass
fbe07ba0f8 dm: test: dts: Sort the aliases in the test device tree file
Sort these aliases to avoid confusion as to what is present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05 20:58:40 -06:00
Simon Glass
182bf92d19 dm: i2c: Add an explicit test mode to the sandbox I2C driver
At present this driver has a few test features. They are needed for running
the driver model unit tests but are confusing and unnecessary if using
sandbox at the command line. Add a flag to enable the test mode, and don't
enable it by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Joe Hershberger
172a31bf87 test: dm: eth: Skip timeouts on ping tests
Indicate to the emulated sandbox Ethernet driver when we expect a
timeout and tell it to leap forward.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:18 -06:00
Simon Glass
f9fd4558ea dm: test: Don't clear global_data in dm_test_uclass_before_ready()
We must not clear global_data even in tests, since the ram_buffer (which
is used by malloc()) will also be lost, and subsequent tests will fail.

Zero only the global_data fields that are required for the test to function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-22 11:15:36 -06:00
Przemyslaw Marczak
6e0c4880c8 dm: test: Add tests for get/find uclass's device by name
This commit introduces simple tests for functions:
- uclass_find_device_by_name()
- uclass_get_device_by_name()

Tests added by this commit:
- Test: dm_test_uclass_devices_find_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_find_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_find_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

- Test: dm_test_uclass_devices_get_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_get_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_get_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * founddev is active
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:16 -06:00
Przemyslaw Marczak
9e85f13ddc dm: test: Add tests for get/find uclass devices
This commit introduces simple tests for functions:
- uclass_find_first_device()
- uclass_find_next_device()
- uclass_first_device()
- uclass_next_device()

Tests added by this commit:
- Test: dm_test_uclass_devices_find:
  * call uclass_find_first_device(), then check if: (dev != NULL), (ret == 0)
  * for the rest devices, call uclass_find_next_device() and do the same check

- Test: dm_test_uclass_devices_get:
  * call uclass_first_device(), then check if:
    -- (dev != NULL), (ret == 0), device_active()
  * for the rest devices, call uclass_next_device() and do the same check

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Przemyslaw Marczak
754e71e850 dm: test: Add tests for device's uclass platform data
This test introduces new test structure type:dm_test_perdev_uc_pdata.
The structure consists of three int values only. For the test purposes,
three pattern values are defined by enum, starting with TEST_UC_PDATA_INTVAL1.

This commit adds two test cases for uclass platform data:
- Test: dm_test_autobind_uclass_pdata_alloc - this tests if:
  * uclass driver sets: .per_device_platdata_auto_alloc_size field
  * the devices's: dev->uclass_platdata is non-NULL

- Test: dm_test_autobind_uclass_pdata_valid - this tests:
  * if the devices's: dev->uclass_platdata is non-NULL
  * the structure of type 'dm_test_perdev_uc_pdata' allocated at address
    pointed by dev->uclass_platdata. Each structure field, should be equal
    to proper pattern data, starting from .intval1 == TEST_UC_PDATA_INTVAL1.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Simon Glass
e00cb2232b dm: usb: Add tests for the USB uclass
This adds a simple test for probing and a functional test using the flash
stick emulator, which tests a large chunk of the USB stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
57f54d55bd dm: test: Allow 'dm test' to select a particular test to run
As well as running all tests, it is useful to be able to run a selected test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
b66c0a662b dm: test: Correct printf() output nit in 'dm uclass'
Neither the hyphen nor the equals sign is needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00