Commit graph

15 commits

Author SHA1 Message Date
Liam Beguin
0f5b461b9b i2c: lpc32xx: Force consistent bus numbering
Normally, this would probably be done by adding devicetree aliases
to the main dtsi file for the lpc32xx and using bus->req_seq instead.

Since we want to have consistent i2c numbering, we cannot force the
bus->req_seq because. If for instance we have 3 buses numbered
from 0 to 2 with i2c0 enabled, i2c1 disabled and i2c2 enabled;
i2c2 can be selected using 'i2c dev 1' and 'i2c dev 2' commands
because a bus can be probed using req_seq or seq interchangeably.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:27:20 +02:00
Liam Beguin
fb05788013 i2c: lpc32xx: Move definitions to header file
Since the lpc32xx i2c driver does not yet support the devicetree bindings,
this structure is also needed by the board file as the hardware description
is done there.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:27:14 +02:00
Sylvain Lemieux
ddfd082169 i2c: lpc32xx: Remove note for DM conversation
Removed note in the LPC32xx I2C driver for DM conversation.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:27:08 +02:00
Liam Beguin
d61c7adbff i2c: lpc32xx: Add DM for lpc32xx I2C
Adding DM specific wrapper functions and definitions.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:26:39 +02:00
Liam Beguin
eddac8e9fe i2c: lpc32xx: Factor out i2c_adapter parameter
This is part of the prep work for the migration to the driver model.
It will enable the driver to support DM and non-DM configurations
using the same functions.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:26:30 +02:00
Liam Beguin
552531e45d i2c: lpc32xx: Prepare compatibility functions
This is part of the prep work for the migration to the driver model.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:26:16 +02:00
Liam Beguin
03d924ae76 i2c: lpc32xx: Rename probe function
This is part of the prep work for the migration to the driver model.
What used to be the probe function is now called probe_chip.

Signed-off-by: Liam Beguin <lbeguin@tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2017-03-28 06:26:06 +02:00
Simon Glass
2852709676 dm: i2c: Add a note to I2C drivers which need conversion
Maintainers need to be notified more directly of the need to convert these
drivers. Add a note to the top each affected file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05 13:28:03 +01:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Vladimir Zapolskiy
ea16c6a13b i2c: lpc32xx: correct sanity check for requested bus speed
LPC32xx has 3 I2C bus controllers, 2 of them are used as generic ones
and their parent clock is HCLK and CLK_HI/CLK_LO registers are 10 bit
wide. This means that if HCLK is 104MHz, then minimal configurable I2C
clock speed is about 51KHz.

Only USB OTG I2C bus controller CLK registers are 8 bit wide, thus in
assumption that peripheral clock is 13MHz it allows to set the minimal
bus speed about 25.5KHz.

Check for negative half clock value is removed since it is always false.

The change fixes the following problem for I2C busses 0 and 1:

  => i2c dev 0
  Setting bus to 0
  => i2c speed 100000
  Setting bus speed to 100000 Hz
  Failure changing bus speed (-22)

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:59 -04:00
Sylvain Lemieux
1933af15e2 i2c: lpc32xx: add support for OTG I2C
Updated the LPC32xx I2C driver to support
the OTG I2C that is part of the USB module.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-08-18 13:45:57 -04:00
Sylvain Lemieux
58243001a9 i2c: lpc32xx: fix write timeout
Fix a condition that generate watchdog timeout inside "lpc32xx_i2c_write" when parameters alen = 0 and len = 0.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-17 08:11:50 -04:00
Sylvain Lemieux
3d2b6a2e5f i2c: lpc32xx: fix read timeout
Fix a condition that generate watchdog timeout inside "lpc32xx_i2c_read" when parameters alen != 0 and len = 0.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-17 08:11:49 -04:00
Sylvain Lemieux
b395a996a6 i2c: lpc32xx: use api to get hclk instead of fix value
The HCLK is not constant and can take different value; use the api function to get the value of the HCLK for the I2C clock high and low computation.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-17 08:11:49 -04:00
Albert ARIBAUD \(3ADEV\)
5e862b9539 lpc32xx: i2c: add LPC32xx I2C interface support
Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:07 +02:00