Commit graph

151 commits

Author SHA1 Message Date
Masahiro Yamada
dee37fc99d Remove <inttypes.h> includes and PRI* usages in printf() entirely
In int-ll64.h, we always use the following typedefs:

  typedef unsigned int         u32;
  typedef unsigned long        uintptr_t;
  typedef unsigned long long   u64;

This does not need to match to the compiler's <inttypes.h>.
Do not include it.

The use of PRI* makes the code super-ugly.  You can simply use
"l" for printing uintptr_t, "ll" for u64, and no modifier for u32.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10 20:48:17 -04:00
Ramon Fried
6b6f216f92 fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary
If CONFIG_NR_DRAM_BANKS is bigger than the default
value (4) define MEMORY_BANKS_MAX as CONFIG_NR_DRAM_BANKS.

Fixes: 2a1f4f1758 ("Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined"")
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-16 16:45:02 -04:00
Michal Simek
cd1457d74e common: fdt: Make fdt_del_subnodes/fdt_del_partition static
These functions are only called in this file that's why make them static
to keep static analysers happy.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-07 11:03:43 +02:00
Ramon Fried
2a1f4f1758 Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined"
This reverts commit 5e5745465c.

The reverted commit didn't support the scenario where there are less
DRAM banks in U-Boot than in Linux.
Also, it didn't introduce any new functionality, only limitaion.
User could just increase MEMORY_BANKS_MAX if it's too small.
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-28 11:58:10 -04:00
Masahiro Yamada
5f4e32d058 fdt_support: make fdt_fixup_mtdparts() prototype more specific
The second argument of fdt_fixup_mtdparts() is an opaque pointer,
'void *node_info', hence callers can pass any pointer.

Obviously, fdt_fixup_mtdparts() expects 'struct node_info *'
otherwise, it crashes run-time.

Change the prototype so that it is compile-time checked.

Also, add 'const' qualifier to it so that callers can constify
the struct node_info arrays.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-25 08:47:52 +09:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Thierry Reding
ed5af03f9b fdt: Fixup only valid memory banks
Memory banks with address 0 and size 0 are empty and should not be
passed to the OS via device tree.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-02-23 10:40:50 -05:00
Thierry Reding
6d29cc7dcf fdt: Fixup only valid memory banks
Memory banks with address 0 and size 0 are empty and should not be
passed to the OS via device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2018-02-18 12:53:38 -07:00
Philipp Tomsich
a5af51a703 spl: fit: move fdt_record_loadable out of ARCH_FIXUP_FDT_MEMORY guard
The fdt_record_loadable()-function was wedged between other functions
that were guarded by ARCH_FIXUP_FDT_MEMORY.  This could lead to linker
errors on some configurations.

With this change, fdt_record_loadable() is moved out of the
ARCH_FIXUP_FDT_MEMORY guard (plus I tried to retain alphabetical
ordering for functions by placing it appropriately).

References: 9f45aeb ("spl: fit: implement fdt_record_loadable")
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2018-02-13 12:52:57 +01:00
Prabhakar Kushwaha
24acb83d8f common: Fix-up MAC addr in dts by fetching env variable serially
The MAC addresses get fixed in the device tree for "ethernet" nodes
is by using trailing number behind "ethernet" found in "/aliases".
It may not be necessary for the "ethernet" nodes to be sequential.
There can be gaps in between or any node disabled

So provide a support to fetch MAC addr sequentially from env
and apply them to "ethernet" nodes in the order they appear in
device tree only if "ethernet" is not "disabled"

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-24 12:42:50 -07:00
Philipp Tomsich
9f45aeb937 spl: fit: implement fdt_record_loadable
During the loading of more complex FIT images (e.g. when the invoked
next stage needs to find additional firmware for a power-management
core... or if there are multiple images for different privilege levels
started in parallel), it is helpful to create a record of what images
are loaded where: if a FDT is loaded for one of the next stages, it
can be used to convey the status and location of loadables.

This adds a fdt_record_loadable() function that can be invoked to
record the status of each loadable below the /fit-images path.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-26 00:39:07 +01:00
Pantelis Antoniou
fc7c31891c fdt: Introduce helper method fdt_overlay_apply_verbose()
Introduce fdt_overlay_apply_verbose, a method that applies an
overlay but in the case of an error produces a helpful message.

In addition if a base tree is found to be missing the __symbols__
node the message will point out that the probable reason is that
the base tree was miscompiled without the -@ option.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-09-15 05:27:48 -06:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
336a44877a fdt: Correct fdt_get_base_address()
This function appears to obtain the value of the 'ranges' property rather
than 'reg'. As such it does not behave as documented or expected.

In addition it picks up the second field of the property which is the size
(with prop += naddr) rather than the first which is the address.

Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-01 11:58:00 +09:00
Heiko Schocher
98f705c9ce powerpc: remove 4xx support
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03 17:35:28 -04:00
Simon Glass
eed36609b5 fdt: Rename a few functions in fdt_support
These two functions have an of_ prefix which conflicts with naming used
in of_addr. Rename them:

   fdt_read_number
   fdt_support_bus_default_count_cells

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:11 -06:00
Simon Glass
ec002119cf fdt: Update fdt_get_base_address() to use const
This function does not change the device tree so adjust it to use const
for this parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:07 -06:00
Tuomas Tynkkynen
f8e57c650d fdt_support: Fixup 'ethernet' aliases not ending in digits
The Raspberry Pi device tree files since Linux v4.9 have a "ethernet"
alias pointing to the on-board Ethernet device node. However,
U-Boot's fdt_fixup_ethernet() only looks at ethernet aliases ending
in digits.

As the spec doesn't mandate that aliases must end in numbers and there
have been much older uses of an "ethernet" aliases in the wild
(according to Tom Rini), change the code to accept "ethernet" as well.

Without this Linux isn't told of the MAC address provided by the
RPI firmware and the ethernet interface is always assigned a random MAC
address.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-26 09:58:23 -05:00
Tom Rini
e1a71f8b33 Merge branch 'master' of git://git.denx.de/u-boot-net 2017-02-09 11:56:35 -05:00
Ladislav Michl
136026f18e common: fdt_support: Remove check for mtdparts in fdt_fixup_mtdparts
fdt_fixup_mtdparts currently does nothing when partition info is
runtime-generated or compiled-in defaults are used.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Fix nits in commit message:
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 05:34:52 -07:00
oliver@schinagl.nl
a40db6d511 net: cosmetic: Do not use magic values for ARP_HLEN
Commit 674bb24982 ("net: cosmetic: Replace magic numbers in arp.c with
constants") introduced a nice define to replace the magic value 6 for
the ethernet hardware address. Replace more hardcoded instances of 6
which really reference the ARP_HLEN (iow the MAC/Hardware/Ethernet
address).

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07 10:54:32 -06:00
Masahiro Yamada
63c0941726 libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY
Commit e2f88dfd2d ("libfdt: Introduce new ARCH_FIXUP_FDT option")
allows us to skip memory setup of DTB, but a problem for ARM is that
spin_table_update_dt() and psci_update_dt() are skipped as well if
CONFIG_ARCH_FIXUP_FDT is disabled.

This commit allows us to skip only fdt_fixup_memory_banks() instead
of the whole of arch_fixup_fdt().  It will be useful when we want to
use a memory node from a kernel DTB as is, but need some fixups for
Spin-Table/PSCI.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Simon Glass <sjg@chromium.org>
Fixed build error for x86:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 20:54:34 -07:00
Hannes Schmelzer
ef47683646 cmd/fdt: add possibilty to have 'extrasize' on fdt resize
Sometimes devicetree nodes and or properties are added out of the u-boot
console, maybe through some script or manual interaction.

The devicetree as loaded or embedded is quite small, so the devicetree
has to be resized to take up those new nodes/properties.

In original the devicetree was only extended by effective
4 * add_mem_rsv.

With this commit we can add an argument to the "fdt resize" command,
which takes the extrasize to be added.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-13 13:54:10 -06:00
Stephen Warren
11e44fc6bd fdt_support: fdt_translate_address() blob const correctness
The next patch will call fdt_translate_address() from somewhere with a
"const void *blob" rather than a "void *blob", so fdt_translate_address()
must accept a const pointer too. Constify the minimum number of function
parameters to achieve this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Squashed in build fix from Stephen:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-12 09:20:27 -06:00
Paul Burton
49717b18be fdt: Document the rest of struct of_bus
Provide some documentation for the fields of struct of_bus, for
consistency with that provided for the new match field.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-25 23:13:38 +02:00
Paul Burton
0a222d53d8 fdt: Support for ISA busses
Support ISA busses in much the same way as Linux does. This allows for
ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is
selected in order to avoid including the code in builds which won't need
it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-25 23:13:09 +02:00
Lev Iserovich
a434fd1d28 fdt: fix setting MAC addresses for multiple interfaces
For multiple ethernet interfaces the FDT offset of '/aliases' will change as we
are adding MAC addresses to the FDT.
Therefore only the first interface ('ethernet0') will get properly updated in
the FDT, with the rest getting FDT errors when we try to set their MAC address.

Signed-off-by: Lev Iserovich <iserovil@deshawresearch.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-03 17:52:10 -05:00
Przemyslaw Marczak
4428f3c87a Revert "fdt: fix address cell count checking in fdt_translate_address()"
This reverts commit 71105f50fe.

The reverted commit was applied for a temporary to unbreak
few Exynos boards on the release.

After the discussion about the change, this commit should be avoided.
Fixed device-tree for Exynos, allows reverting it without any issues.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-03-17 21:27:39 -06:00
Bin Meng
9f29aeb89d Revert "fdt_support: Add multi-serial support for stdout fixup"
This reverts commit 3e303f748c.

The fix up in the /aliases node does not work under the following
scenarios:
- Not every non-DM serial driver was written to have a driver name
  that conforms the format of "serial%d" or "eserial%d".
- With driver model serial, the stdio_devices[] stores the serial
  device node name in the device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:12 -07:00
Tom Rini
774da4b9aa Merge git://git.denx.de/u-boot-net 2016-01-13 21:05:16 -05:00
Przemyslaw Marczak
71105f50fe fdt: fix address cell count checking in fdt_translate_address()
Commit: dm: core: Enable optional use of fdt_translate_address()

Enables use of this function as default, but after this it's not
possible to get dev address for the case in which: '#size-cells == 0'

This causes errors when getting address for some GPIOs, for which
the '#size-cells' is set to 0.

Example error:
'__of_translate_address: Bad cell count for gpx0'

Allowing for that case by modifying the macro 'OF_CHECK_COUNTS',
(called from )__of_translate_address(), fixes the issue.

Now, this macro doesn't check, that '#size-cells' is greater than 0.

This is possible from the specification point of view, but I'm not sure
that it doesn't introduce a regression for other configs.

Please test and share the results.

Tested-on: Odroid U3, Odroid X2, Odroid XU3, Sandbox.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2016-01-07 11:28:04 -07:00
Bin Meng
bc393a7954 fdt: Rewrite the logic in fdt_fixup_ethernet()
Currently in fdt_fixup_ethernet() the MAC address fix up is
handled in a loop of which the exit condition is to test the
"eth%daddr" env is not NULL. However this creates unnecessary
constrains that those "eth%daddr" env variables must be
sequential even if "ethernet%d" does not start from 0 in the
"/aliases" node. For example, with "/aliases" node below:

    aliases {
        ethernet3 = &enet3;
        ethernet4 = &enet4;
    };

"ethaddr", "eth1addr", "eth2addr" must exist in order to fix
up ethernet3's MAC address successfully.

Now we change the loop logic to iterate the properties in the
"/aliases" node. For each property, test if it is in a format
of "ethernet%d", then get its MAC address from corresponding
"eth%daddr" env and fix it up in the dtb.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
On OMAP4 Panda (+v4.3 kernel)
Tested-by: Tom Rini <trini@konsulko.com>
2015-12-21 19:56:17 -06:00
Bin Meng
52d825cc7b fdt: Deprecate "usbethaddr" usage in fdt_fixup_ethernet()
In fdt_fixup_ethernet() only "usbethaddr" is handled to fix up the
first usb ethernet port MAC address. Other additional usb ethernet
ports are ignored as there is no logic to handle "usbeth%daddr".

It is suggested we should use "ethaddr" for all ethernet devices.
Hence deprecate "usbethaddr" usage in fdt_fixup_ethernet().

This actually reverts commit b1f49ab8c7
"ARM: fdt support: Add usbethaddr as an acceptable MAC".

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
On OMAP4 Panda (+ v4.3 kernel)
Tested-by: Tom Rini <trini@konsulko.com>
2015-12-21 19:55:27 -06:00
Bin Meng
a0ae380b3c fdt: Change OF_BAD_ADDR to FDT_ADDR_T_NONE
Currently OF_BAD_ADDR is always -1ULL. When using OF_BAD_ADDR as the
return value of dev_get_addr(), it creates potential size mismatch
as dev_get_addr() uses FDT_ADDR_T_NONE as the return value which can
be either -1U or -1ULL depending on CONFIG_PHYS_64BIT. Now we change
OF_BAD_ADDR to FDT_ADDR_T_NONE to avoid such case.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-12-09 17:44:36 +08:00
Scott Wood
da77c81990 fdt_support: Don't panic if stdout alias is missing
Currently, using fdt_fixup_stdout() on a device tree that is missing
the relevant alias results in this:

WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND.
ERROR: /chosen node create failed
 - must RESET the board to recover.

FDT creation failed! hanging...### ERROR ### Please RESET the board ###

There is no reason for this to be a fatal error rather than a warning,
and removing this allows for a smooth transition on a platform where
the device tree currently lacks the correct aliases but will have them
in the future.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26 09:09:54 -07:00
Andre Przywara
5c1cf89f8c fdt: prevent clearing memory node if there are no banks
Avoid clearing the reg property in the memory DT node if no memory
banks have been specified for a board (CONFIG_NR_DRAM_BANKS == 0).
This allows boards to let U-Boot skip the DT memory tinkering in case
other firmware has already setup the node properly before.
This should be safe as all callers of fdt_fixup_memory_banks that use
a computed <banks> value put at least 1 in there.
Add some documentation comments to the header file.

Signed-off-by: Andre Przywara <osp@andrep.de>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-20 07:21:47 -06:00
Paul Kocialkowski
10be5b5d3a fdt: Pass the device serial number through devicetree
Before device-tree, the device serial number used to be passed to the kernel
using ATAGs (on ARM). This is now deprecated and all the handover to the kernel
should now be done using device-tree. Thus, this passes the serial-number
property to the kernel using the serial-number property of the root node, as
expected by the kernel.

The serial number is a string that somewhat represents the device's serial
number. It might come from some form of storage (e.g. an eeprom) and be
programmed at factory-time by the manufacturer or come from identification
bits available in e.g. the SoC.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Simon Glass <sgj@chromium.org>
2015-06-05 08:32:07 -06:00
Simon Glass
c3ec646dde fdt: Correct warning in fdt_setup_simplefb_node()
Adjust the printf() string to avoid a warning on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Tim Harvey
08daa258e6 fdt: add new fdt_fixup_display function to configure display
Add 'fdt_fixup_display' function to fixup device-tree native-mode property
of display-timings node to select timings for a specific display.
This is useful if a device-tree has configurations for multiple
display timings for undetectable displays.

see kernel Documentation/devicetree/bindings/video/display-timing.txt

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 14:39:06 +02:00
Tom Rini
97cdf64026 Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 2014-12-04 09:24:05 -05:00
Hans de Goede
ffccb84c1a fdt: Fix regression in fdt_pack_reg()
After commit 933cdbb479: "fdt: Try to use fdt_address_cells()/fdt_size_cells()"
I noticed that allwinner boards would no longer boot.

Switching to fdt_address_cells / fdt_size_cells changes the result from
bytes to 32 bit words, so when we increment pointers into the blob, we must
do so by 32 bit words now.

This commit makes allwinner boards boot again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Vince Hsu <vinceh@nvidia.com>
2014-12-01 08:23:32 -07:00
Simon Glass
e48f3741c3 sandbox: Fix warnings due to 64-bit printf() strings
Now that we have inttypes.h, use it in a few more places to avoid compiler
warnings on sandbox when building on 64-bit machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-26 20:25:39 -07:00
Tom Rini
f2ffe7da7f Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2014-11-26 11:21:16 -05:00
Tom Rini
1fc4e6f486 Merge git://git.denx.de/u-boot-fdt 2014-11-26 11:21:14 -05:00
Hans de Goede
d4f495a881 fdt_support: Add a fdt_setup_simplefb_node helper function
Add a generic helper to fill and enable simplefb nodes.

The first user of this will be the sunxi display code.

lcd_dt_simplefb_configure_node is also a good candidate to be converted
to use this, but that requires someone to run some tests first, as
lcd_dt_simplefb_configure_node does not honor #address-cells and #size-cells,
but simply assumes 1 and 1 for both.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-25 13:38:46 +01:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Simon Glass
933cdbb479 fdt: Try to use fdt_address_cells()/fdt_size_cells()
Use these new functions where possible. They default to a value of 2 so we
cannot use them in some places where we need a default value of 1.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
41f09bbe59 fdt: Change fdt_pack_reg() to static and fix types
This function is only called within this file so make it static. Also
fix its argument types to be consistent with its caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
a9e8e29101 fdt: Export the fdt_find_or_add_subnode() function
This function is useful for ensuring that a node exists. Export it so it
can be used more widely.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00